Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
The correct nomenclature for the highest privileged user is superuser
and not "super user", this replaces the few instances where that was
used erroneously. No user-visible changes are done as all changes are
in comments, so no back-patching.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW3snGBD8BAQiArMDS1Y43LuX3ymwO+N8aUg1Hrv6hYNw@mail.gmail.com
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
Until now, when defining extended statistics, everything except a plain
column reference was treated as complex expression. So for example "a"
was a column reference, but "(a)" would be an expression. In most cases
this does not matter much, but there were a couple strange consequences.
For example
CREATE STATISTICS s ON a FROM t;
would fail, because extended stats require at least two columns. But
CREATE STATISTICS s ON (a) FROM t;
would succeed, because that requirement does not apply to expressions.
Moreover, that statistics object is useless - the optimizer will always
use the regular statistics collected for attribute "a".
So do a bit more work to identify those expressions referencing a single
column, and translate them to a simple column reference. Backpatch to
14, where support for extended statistics on expressions was introduced.
Reported-by: Justin Pryzby
Backpatch-through: 14
Discussion: https://postgr.es/m/20210816013255.GS10479%40telsasoft.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When starting to use a query parsetree loaded from the catalogs,
we must begin by applying AcquireRewriteLocks(), to obtain the same
relation locks that the parser would have gotten if the query were
entered interactively, and to do some other cleanup such as dealing
with later-dropped columns. New-style SQL functions are just as
subject to this rule as other stored parsetrees; however, of the
places dealing with such functions, only init_sql_fcache had gotten
the memo. In particular, if we successfully inlined a new-style
set-returning SQL function that contained any relation references,
we'd either get an assertion failure or attempt to use those
relation(s) sans locks.
I also added AcquireRewriteLocks calls to fmgr_sql_validator and
print_function_sqlbody. Desultory experiments didn't demonstrate any
failures in those, but I suspect that I just didn't try hard enough.
Certainly we don't expect nearby code paths to operate without locks.
On the same logic of it-ought-to-have-the-same-effects-as-the-old-code,
call pg_rewrite_query() in fmgr_sql_validator, too. It's possible
that neither code path there needs to bother with rewriting, but
doing the analysis to prove that is beyond my goals for today.
Per bug #17161 from Alexander Lakhin.
Discussion: https://postgr.es/m/17161-048a1cdff8422800@postgresql.org
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
We've supported parallel aggregation since e06a38965. At the time, we
didn't quite get around to also adding parallel DISTINCT. So, let's do
that now.
This is implemented by introducing a two-phase DISTINCT. Phase 1 is
performed on parallel workers, rows are made distinct there either by
hashing or by sort/unique. The results from the parallel workers are
combined and the final distinct phase is performed serially to get rid of
any duplicate rows that appear due to combining rows for each of the
parallel workers.
Author: David Rowley
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrjRxVKwQN0he79xS+9wyotFXL=RmoWqGGO2N45Farpgw@mail.gmail.com
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
If the replacement string doesn't contain \1...\9, then we don't
need sub-match locations, so we can use the REG_NOSUB optimization
here too. There's already a pre-scan of the replacement string
to look for backslashes, so extend that to check for digits, and
refactor to allow that to happen before we compile the regexp.
While at it, try to speed up the pre-scan by using memchr() instead
of a handwritten loop. It's likely that this is lost in the noise
compared to the regexp processing proper, but maybe not. In any
case, this coding is shorter.
Also, add some test cases to improve the poor coverage of
appendStringInfoRegexpSubstr().
Discussion: https://postgr.es/m/3534632.1628536485@sss.pgh.pa.us
Rather than trying to pick table aliases that won't conflict with
any possible user-defined matview column name, adjust the queries'
syntax so that the aliases are only used in places where they can't be
mistaken for column names. Mostly this consists of writing "alias.*"
not just "alias", which adds clarity for humans as well as machines.
We do have the issue that "SELECT alias.*" acts differently from
"SELECT alias", but we can use the same hack ruleutils.c uses for
whole-row variables in SELECT lists: write "alias.*::compositetype".
We might as well revert to the original aliases after doing this;
they're a bit easier to read.
Like 75d66d10e, back-patch to all supported branches.
Discussion: https://postgr.es/m/2488325.1628261320@sss.pgh.pa.us
Casting a value that's already of a type with a specific typmod
to an unspecified typmod doesn't do anything so far as run-time
behavior is concerned. However, it really ought to change the
exposed type of the expression to match. Up to now,
coerce_type_typmod hasn't bothered with that, which creates gotchas
in contexts such as recursive unions. If for example one side of
the union is numeric(18,3), but it needs to be plain numeric to
match the other side, there's no direct way to express that.
This is easy enough to fix, by inserting a RelabelType to update the
exposed type of the expression. However, it's a bit nervous-making
to change this behavior, because it's stood for a really long time.
(I strongly suspect that it's like this in part because the logic
pre-dates the introduction of RelabelType in 7.0. The commit log
message for 57b30e8e2 is interesting reading here.) As a compromise,
we'll sneak the change into 14beta3, and consider back-patching to
stable branches if no complaints emerge in the next three months.
Discussion: https://postgr.es/m/CABNQVagu3bZGqiTjb31a8D5Od3fUMs7Oh3gmZMQZVHZ=uWWWfQ@mail.gmail.com
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This patch adds new functions regexp_count(), regexp_instr(),
regexp_like(), and regexp_substr(), and extends regexp_replace()
with some new optional arguments. All these functions follow
the definitions used in Oracle, although there are small differences
in the regexp language due to using our own regexp engine -- most
notably, that the default newline-matching behavior is different.
Similar functions appear in DB2 and elsewhere, too. Aside from
easing portability, these functions are easier to use for certain
tasks than our existing regexp_match[es] functions.
Gilles Darold, heavily revised by me
Discussion: https://postgr.es/m/fc160ee0-c843-b024-29bb-97b5da61971f@darold.net
959d00e9d added the ability to make use of an Append node instead of a
MergeAppend when we wanted to perform a scan of a partitioned table and
the required sort order was the same as the partitioned keys and the
partitioned table was defined in such a way that earlier partitions were
guaranteed to only contain lower-order values than later partitions.
However, previously we didn't allow these ordered partition scans for
LIST partitioned table when there were any partitions that allowed
multiple Datums. This was a very cheap check to make and we could likely
have done a little better by checking if there were interleaved
partitions, but at the time we didn't have visibility about which
partitions were pruned, so we still may have disallowed cases where all
interleaved partitions were pruned.
Since 475dbd0b7, we now have knowledge of pruned partitions, we can do a
much better job inside partitions_are_ordered().
Here we pass which partitions survived partition pruning into
partitions_are_ordered() and, for LIST partitioning, have it check to see
if any live partitions exist that are also in the new "interleaved_parts"
field defined in PartitionBoundInfo.
For RANGE partitioning we can relax the code which caused the partitions
to be unordered if a DEFAULT partition existed. Since we now know which
partitions were pruned, partitions_are_ordered() now returns true when the
DEFAULT partition was pruned.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvrdoN_sXU52i=QDXe2k3WAo=EVry29r2+Tq2WYcn2xhEA@mail.gmail.com
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
The logic used to support a change of access method for a table is
similar to changes for tablespace or relation persistence, requiring a
table rewrite with an exclusive lock of the relation changed. Table
rewrites done in ALTER TABLE already go through the table AM layer when
scanning tuples from the old relation and inserting them into the new
one, making this implementation straight-forward.
Note that partitioned tables are not supported as these have no access
methods defined.
Author: Justin Pryzby, Jeff Davis
Reviewed-by: Michael Paquier, Vignesh C
Discussion: https://postgr.es/m/20210228222530.GD20769@telsasoft.com
We failed to deal with an UNKNOWN-type input for
anycompatiblemultirange; that should throw an error indicating
that we don't know how to resolve the multirange type.
We also failed to infer the type of an anycompatiblerange output
from an anycompatiblemultirange input or vice versa.
Per bug #17066 from Alexander Lakhin. Back-patch to v14
where multiranges were added.
Discussion: https://postgr.es/m/17066-16a37f6223a8470b@postgresql.org
Commit 48c5c9068 failed to allow for buildfarm animals that
force jit = on. I'm surprised that this hasn't come up
elsewhere in explain.sql, so turn it off for that whole
test script not just the one new test case.
Per buildfarm.
This patch causes EXPLAIN output to refer to objects that are in
the current session's temp schema with the "pg_temp" schema alias
rather than that schema's actual name. This is useful for our own
testing purposes since it will stabilize EXPLAIN VERBOSE output
for such cases, allowing us to use that in regression tests.
It should be less confusing for end users too.
Since ruleutils.c needs to change behavior for this, the change
also leaks into a few other users of ruleutils.c, for example
pg_get_viewdef(). AFAICS that won't cause any problems.
We did find that aggressively trying to change this behavior
across-the-board would cause issues, but as long as "pg_temp"
only appears within generated SQL text, I think it'll be fine.
Along the way, make get_namespace_name_or_temp conform to the
same API as get_namespace_name, ie that it returns a palloc'd
string or NULL. The current behavior hasn't caused any bugs
since no callers attempt to pfree the result, but if it gets
more widespread usage that could become a problem.
Amul Sul, reviewed and extended by me
Discussion: https://postgr.es/m/CAAJ_b97W=QaGmag9AhWNbmx3uEYsNkXWL+OVW1_E1D3BtgWvtw@mail.gmail.com
Commit ad600bba04 added psql command \dX listing extended statistics
objects, but it failed to consider search_path when selecting the
elements so some of the returned elements might be invisible.
The visibility was already considered for tab completion (added by
commit d99d58cdc8), so adding it to the query is fairly simple.
Reported and fix by Justin Pryzby, regression tests by me. Backpatch
to PostgreSQL 14, where \dX was introduced.
Batchpatch-through: 14
Author: Justin Pryzby
Reviewed-by: Tatsuro Yamada
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
Formerly, when specifying NUMERIC(precision, scale), the scale had to
be in the range [0, precision], which was per SQL spec. This commit
extends the range of allowed scales to [-1000, 1000], independent of
the precision (whose valid range remains [1, 1000]).
A negative scale implies rounding before the decimal point. For
example, a column might be declared with a scale of -3 to round values
to the nearest thousand. Note that the display scale remains
non-negative, so in this case the display scale will be zero, and all
digits before the decimal point will be displayed.
A scale greater than the precision supports fractional values with
zeros immediately after the decimal point.
Take the opportunity to tidy up the code that packs, unpacks and
validates the contents of a typmod integer, encapsulating it in a
small set of new inline functions.
Bump the catversion because the allowed contents of atttypmod have
changed for numeric columns. This isn't a change that requires a
re-initdb, but negative scale values in the typmod would confuse old
backends.
Dean Rasheed, with additional improvements by Tom Lane. Reviewed by
Tom Lane.
Discussion: https://postgr.es/m/CAEZATCWdNLgpKihmURF8nfofP0RFtAKJ7ktY6GcZOPnMfUoRqA@mail.gmail.com
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
Animals running in Czech locale failed. I could try to find table names
that don't have this problem, but it seems simpler to just use the C
locale.
Per buildfarm
Renaming triggers on partitioned tables had two problems: first,
it did not recurse to renaming the triggers on the partitions; and
second, it failed to prohibit renaming clone triggers. Having triggers
with different names in partitions is pointless, and furthermore pg_dump
would not preserve names for partitions anyway.
Not backpatched -- making the ALTER TRIGGER throw an error in stable
versions might cause problems for existing scripts.
Co-authored-by: Arne Roland <A.Roland@index.de>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/d0fd7040c2fb4de1a111b9d9ccc456b8@index.de
We don't allow to create replication slot_name as an empty string ('') via
SQL API pg_create_logical_replication_slot() but it is allowed to be set
via Alter Subscription command. This will lead to apply worker repeatedly
keep trying to stream data via slot_name '' and the user is not allowed to
create the slot with that name.
Author: Japin Li
Reviewed-By: Ranier Vilela, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/MEYP282MB1669CBD98E721C77CA696499B61A9@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
Check for conflicting or redundant options, as we do for most other
commands. Specifying any option more than once is at best redundant,
and quite likely indicates a bug in the user's code.
While at it, improve the error for conflicting locale options by
adding detail text (the same as for CREATE DATABASE).
Bharath Rupireddy, reviewed by Vignesh C. Some additional hacking by
me.
Discussion: https://postgr.es/m/CALj2ACWtL6fTLdyF4R_YkPtf1YEDb6FUoD5DGAki3rpD+sWqiA@mail.gmail.com
pg_dump failed to preserve the 'enabled' flag (which can be not only
disabled, but also REPLICA or ALWAYS) for partitions which had it
changed from their respective parents. Attempt to handle that by
including a definition for such triggers in the dump, but replace the
standard CREATE TRIGGER line with an ALTER TRIGGER line.
Backpatch to 11, where these triggers can exist. In branches 11 and 12,
pick up a few test lines from commit b9b408c487 to verify that
pg_upgrade is okay with these arrangements.
Co-authored-by: Justin Pryzby <pryzby@telsasoft.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
When triggers are cloned from partitioned tables to their partitions,
the 'tgenabled' flag (origin/replica/always/disable) was not propagated.
Make it so that the flag on the trigger on partition is initially set to
the same value as on the partitioned table.
Add a test case to verify the behavior.
Backpatch to 11, where this appeared in commit 86f575948c.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200930223450.GA14848@telsasoft.com
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
