It seems plausible that someone might want to experiment with
different values. The pressing reason though is that I'm reviewing a
patch that requires pg_upgrade to manipulate SLRU files. That patch
needs to access SLRU_PAGES_PER_SEGMENT from pg_upgrade code, and
slru.h, where SLRU_PAGES_PER_SEGMENT is currently defined, cannot be
included from frontend code. Moving it to pg_config_manual.h makes it
accessible.
Now that it's a little more likely that someone might change
SLRU_PAGES_PER_SEGMENT, add a cluster compatibility check for it.
Bump catalog version because of the new field in the control file.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/c7a4ea90-9f7b-4953-81be-b3fcb47db057@iki.fi
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
This commit adds a new column, seq_sync_error_count, to the
pg_stat_subscription_stats view. This counter tracks the number of errors
encountered by the sequence synchronization worker during operation.
Since a single worker handles the synchronization of all sequences, this
value may reflect errors from multiple sequences. This addition improves
observability of sequence synchronization behavior and helps monitor
potential issues during replication.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Until now BufferDesc.state was not allowed to be modified while the buffer
header spinlock was held. This meant that operations like unpinning buffers
needed to use a CAS loop, waiting for the buffer header spinlock to be
released before updating.
The benefit of that restriction is that it allowed us to unlock the buffer
header spinlock with just a write barrier and an unlocked write (instead of a
full atomic operation). That was important to avoid regressions in
48354581a4. However, since then the hottest buffer header spinlock uses have
been replaced with atomic operations (in particular, the most common use of
PinBuffer_Locked(), in GetVictimBuffer() (formerly in BufferAlloc()), has been
removed in 5e89985928).
This change will allow, in a subsequent commit, to release buffer pins with a
single atomic-sub operation. This previously was not possible while such
operations were not allowed while the buffer header spinlock was held, as an
atomic-sub would not have allowed a race-free check for the buffer header lock
being held.
Using atomic-sub to unpin buffers is a nice scalability win, however it is not
the primary motivation for this change (although it would be sufficient). The
primary motivation is that we would like to merge the buffer content lock into
BufferDesc.state, which will result in more frequent changes of the state
variable, which in some situations can cause a performance regression, due to
an increased CAS failure rate when unpinning buffers. The regression entirely
vanishes when using atomic-sub.
Naively implementing this would require putting CAS loops in every place
modifying the buffer state while holding the buffer header lock. To avoid
that, introduce UnlockBufHdrExt(), which can set/add flags as well as the
refcount, together with releasing the lock.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
Before commit e25626677f, spinlocks were implemented using semaphores
on some platforms (--disable-spinlocks). That made it necessary to
initialize semaphores early, before any spinlocks could be used. Now
that we don't support --disable-spinlocks anymore, we can allocate the
shared memory needed for semaphores the same way as other shared
memory structures. Since the semaphores are used only in the PGPROC
array, move the semaphore shmem size estimation and initialization
calls to ProcGlobalShmemSize() and InitProcGlobal().
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAExHW5seSZpPx-znjidVZNzdagGHOk06F+Ds88MpPUbxd1kTaA@mail.gmail.com
WAIT FOR is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
WAIT FOR needs to wait without any snapshot held. Otherwise, the snapshot
could prevent the replay of WAL records, implying a kind of self-deadlock.
This is why separate utility command seems appears to be the most robust
way to implement this functionality. It's not possible to implement this as
a function. Previous experience shows that stored procedures also have
limitation in this aspect.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Implement a new facility that allows processes to wait for WAL to reach
specific LSNs, both on primary (waiting for flush) and standby (waiting
for replay) servers.
The implementation uses shared memory with per-backend information
organized into pairing heaps, allowing O(1) access to the minimum
waited LSN. This enables fast-path checks: after replaying or flushing
WAL, the startup process or WAL writer can quickly determine if any
waiters need to be awakened.
Key components:
- New xlogwait.c/h module with WaitForLSNReplay() and WaitForLSNFlush()
- Separate pairing heaps for replay and flush waiters
- WaitLSN lightweight lock for coordinating shared state
- Wait events WAIT_FOR_WAL_REPLAY and WAIT_FOR_WAL_FLUSH for monitoring
This infrastructure can be used by features that need to wait for WAL
operations to complete.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
The existing pairingheap_allocate() uses palloc(), which allocates
from process-local memory. For shared memory use cases, the pairingheap
structure must be allocated via ShmemAlloc() or embedded in a shared
memory struct. Add pairingheap_initialize() to initialize an already-
allocated pairingheap structure in-place, enabling shared memory usage.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
This patch introduces sequence synchronization. Sequences that are synced
will have 2 states:
- INIT (needs [re]synchronizing)
- READY (is already synchronized)
A new sequencesync worker is launched as needed to synchronize sequences.
A single sequencesync worker is responsible for synchronizing all
sequences. It begins by retrieving the list of sequences that are flagged
for synchronization, i.e., those in the INIT state. These sequences are
then processed in batches, allowing multiple entries to be synchronized
within a single transaction. The worker fetches the current sequence
values and page LSNs from the remote publisher, updates the corresponding
sequences on the local subscriber, and finally marks each sequence as
READY upon successful synchronization.
Sequence synchronization occurs in 3 places:
1) CREATE SUBSCRIPTION
- The command syntax remains unchanged.
- The subscriber retrieves sequences associated with publications.
- Published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize all sequences.
2) ALTER SUBSCRIPTION ... REFRESH PUBLICATION
- The command syntax remains unchanged.
- Dropped published sequences are removed from pg_subscription_rel.
- Newly published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize only newly added
sequences.
3) ALTER SUBSCRIPTION ... REFRESH SEQUENCES
- A new command introduced for PG19 by f0b3573c3a.
- All sequences in pg_subscription_rel are reset to INIT state.
- Initiate the sequencesync worker to synchronize all sequences.
- Unlike "ALTER SUBSCRIPTION ... REFRESH PUBLICATION" command,
addition and removal of missing sequences will not be done in this
case.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
This has come up as useful as an alternative of WalRcvStreaming(), to be
able to do sanity checks based on the state of a WAL receiver. This
will be used in a follow-up commit.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Commit b4f584f9d2 (affecting v15~, later backpatched down to 13 as of
3635a0a35a) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
We've been nibbling away at removing uses of "long" for a long time,
since its width is platform-dependent. Here's one more: change the
remaining "long" fields in Plan nodes to Cardinality, since the three
surviving examples all represent group-count estimates. The upstream
planner code was converted to Cardinality some time ago; for example
the corresponding fields in Path nodes are type Cardinality, as are
the arguments of the make_foo_path functions. Downstream in the
executor, it turns out that these all feed to the table-size argument
of BuildTupleHashTable. Change that to "double" as well, and fix it
so that it safely clamps out-of-range values to the uint32 limit of
simplehash.h, as was not being done before.
Essentially, this is removing all the artificial datatype-dependent
limitations on these values from upstream processing, and applying
just one clamp at the moment where we're forced to do so by the
datatype choices of simplehash.h.
Also, remove BuildTupleHashTable's misguided attempt to enforce
work_mem/hash_mem_limit. It doesn't have enough information
(particularly not the expected tuple width) to do that accurately,
and it has no real business second-guessing the caller's choice.
For all these plan types, it's really the planner's responsibility
to not choose a hashed implementation if the hashtable is expected
to exceed hash_mem_limit. The previous patch improved the
accuracy of those estimates, and even if BuildTupleHashTable had
more information it should arrive at the same conclusions.
Reported-by: Jeff Janes <jeff.janes@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1zia0JfW_QR8L5xA2vpa0oqVuiapm78h=WpNsHH13_9uw@mail.gmail.com
For several types of plan nodes that use TupleHashTables, the
planner estimated the expected size of the table as basically
numEntries * (MAXALIGN(dataWidth) + MAXALIGN(SizeofHeapTupleHeader)).
This is pretty far off, especially for small data widths, because
it doesn't account for the overhead of the simplehash.h hash table
nor for any per-tuple "additional space" the plan node may request.
Jeff Janes noted a case where the estimate was off by about a factor
of three, even though the obvious hazards such as inaccurate estimates
of numEntries or dataWidth didn't apply.
To improve matters, create functions provided by the relevant executor
modules that can estimate the required sizes with reasonable accuracy.
(We're still not accounting for effects like allocator padding, but
this at least gets the first-order effects correct.)
I added functions that can estimate the tuple table sizes for
nodeSetOp and nodeSubplan; these rely on an estimator for
TupleHashTables in general, and that in turn relies on one for
simplehash.h hash tables. That feels like kind of a lot of mechanism,
but if we take any short-cuts we're violating modularity boundaries.
The other places that use TupleHashTables are nodeAgg, which took
pains to get its numbers right already, and nodeRecursiveunion.
I did not try to improve the situation for nodeRecursiveunion because
there's nothing to improve: we are not making an estimate of the hash
table size, and it wouldn't help us to do so because we have no
non-hashed alternative implementation. On top of that, our estimate
of the number of entries to be hashed in that module is so suspect
that we'd likely often choose the wrong implementation if we did have
two ways to do it.
Reported-by: Jeff Janes <jeff.janes@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1zia0JfW_QR8L5xA2vpa0oqVuiapm78h=WpNsHH13_9uw@mail.gmail.com
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
Several functions in the codebase accept "Datum *" parameters but do
not modify the pointed-to data. These have been updated to take
"const Datum *" instead, improving type safety and making the
interfaces clearer about their intent. This change helps the compiler
catch accidental modifications and better documents immutability of
arguments.
Most of "Datum *" parameters have a pairing "bool *isnull" parameter,
they are constified as well.
No functional behavior is changed by this patch.
Author: Chao Li <lic@highgo.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEoWx2msfT0knvzUa72ZBwu9LR_RLY4on85w2a9YpE-o2By5HQ@mail.gmail.com
For all extant uses of TupleHashTables, execGrouping.c itself does
nothing with the "tablecxt" except to allocate new hash entries in it,
and the callers do nothing with it except to reset the whole context.
So this is an ideal use-case for a BumpContext, and the hash tables
are frequently big enough for the savings to be significant.
(Commit cc721c459 already taught nodeAgg.c this idea, but neglected
the other callers of BuildTupleHashTable.)
While at it, let's clean up some ill-advised leftovers from rebasing
TupleHashTables on simplehash.h:
* Many comments and variable names were based on the idea that the
tablecxt holds the whole TupleHashTable, whereas now it only holds the
hashed tuples (plus any caller-defined "additional storage"). Rename
to names like tuplescxt and tuplesContext, and adjust the comments.
Also adjust the memory context names to be like "<Foo> hashed tuples".
* Make ResetTupleHashTable() reset the tuplescxt rather than relying
on the caller to do so; that was fairly bizarre and seems like a
recipe for leaks. This is less efficient in the case where nodeAgg.c
uses the same tuplescxt for several different hashtables, but only
microscopically so because mcxt.c will short-circuit the extra resets
via its isReset flag. I judge the extra safety and intellectual
cleanliness well worth those few cycles.
* Remove the long-obsolete "allow_jit" check added by ac88807f9;
instead, just Assert that metacxt and tuplescxt are different.
We need that anyway for this definition of ResetTupleHashTable() to
be safe.
There is a side issue of the extent to which this change invalidates
the planner's estimates of hashtable memory consumption. However,
those estimates are already pretty bad, so improving them seems like
it can be a separate project. This change is useful to do first to
establish consistent executor behavior that the planner can expect.
A loose end not addressed here is that the "entrysize" calculation
in BuildTupleHashTable seems wrong: "sizeof(TupleHashEntryData) +
additionalsize" corresponds neither to the size of the simplehash
entries nor to the total space needed per tuple. It's questionable
why BuildTupleHashTable is second-guessing its caller's nbuckets
choice at all, since the original source of the number should have had
more information. But that all seems wrapped up with the planner's
estimation logic, so let's leave it for the planned followup patch.
Reported-by: Jeff Janes <jeff.janes@gmail.com>
Reported-by: David Rowley <dgrowleyml@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1zia0JfW_QR8L5xA2vpa0oqVuiapm78h=WpNsHH13_9uw@mail.gmail.com
Discussion: https://postgr.es/m/2268409.1761512111@sss.pgh.pa.us
Instead of having five separate GUC structs, one for each type, with
the generic part contained in each of them, flip it around and have
one common struct, with the type-specific part has a subfield.
The very original GUC design had type-specific structs and
type-specific lists, and the membership in one of the lists defined
the type. But now the structs themselves know the type (from the
.vartype field), and they are all loaded into a common hash table at
run time, and so this original separation no longer makes sense. It
creates a bunch of inconsistencies in the code about whether the
type-specific or the generic struct is the primary struct, and a lot
of casting in between, which makes certain assumptions about the
struct layouts.
After the change, all these casts are gone and all the data is
accessed via normal field references. Also, various code is
simplified because only one kind of struct needs to be processed.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
MSVC in C11 mode supports the standard restrict qualifier, so we don't
need the workaround naming pg_restrict anymore.
Even though restrict is in C99 and should be supported by all
supported compilers, we keep the configure test and the hardcoded
redirection to __restrict, because that will also work in C++ in all
supported compilers. (restrict is not part of the C++ standard.)
For backward compatibility for extensions, we keep a #define of
pg_restrict around, but our own code doesn't use it anymore.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/0e3d8644-c01d-4374-86ea-9f0a987981f0%40eisentraut.org
XLogRecordAssemble() may be called multiple times before inserting a
record in XLogInsertRecord(), and the amount of FPIs generated inside
a record whose insertion is attempted multiple times may vary.
The logic added in f9a09aa295 touched directly pgWalUsage in
XLogRecordAssemble(), meaning that it could be possible for pgWalUsage
to be incremented multiple times for a single record. This commit
changes the code to use the same logic as the number of FPIs added to a
record, where XLogRecordAssemble() returns this information and feeds it
to XLogInsertRecord(), updating pgWalUsage only when a record is
inserted.
Reported-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/CAOzEurSiSr+rusd0GzVy8Bt30QwLTK=ugVMnF6=5WhsSrukvvw@mail.gmail.com
This new counter, called "wal_fpi_bytes", tracks the total amount in
bytes of full page images (FPIs) generated in WAL. This data becomes
available globally via pg_stat_wal, and for backend statistics via
pg_stat_get_backend_wal().
Previously, this information could only be retrieved with pg_waldump or
pg_walinspect, which may not be available depending on the environment,
and are expensive to execute. It offers hints about how much FPIs
impact the WAL generated, which could be a large percentage for some
workloads, as well as the effects of wal_compression or page holes.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the addition of wal_fpi_bytes in
PgStat_WalCounters.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOzEurQtZEAfg6P0kU3Wa-f9BWQOi0RzJEMPN56wNTOmJLmfaQ@mail.gmail.com
Extend logicalrep_worker_stop, logicalrep_worker_wakeup, and
logicalrep_worker_find to accept a worker type argument. This change
enables differentiation between logical replication worker types, such as
apply workers and table sync workers. While preserving existing behavior,
it lays the groundwork for upcoming patch to add sequence synchronization
workers.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
This type is just char * underneath, it provides no real value, no
type safety, and just makes the code one level more mysterious. It is
more idiomatic to refer to blobs of memory by a combination of void *
and size_t, so change it to that.
Also, since this type hides the pointerness, we can't apply qualifiers
to what is pointed to, which requires some unconstify nonsense. This
change allows fixing that.
Extension code that uses the Item type can change its code to use
void * to be backward compatible.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/c75cccf5-5709-407b-a36a-2ae6570be766@eisentraut.org
This patch adds support for a new SQL command:
ALTER SUBSCRIPTION ... REFRESH SEQUENCES
This command updates the sequence entries present in the
pg_subscription_rel catalog table with the INIT state to trigger
resynchronization.
In addition to the new command, the following subscription commands have
been enhanced to automatically refresh sequence mappings:
ALTER SUBSCRIPTION ... REFRESH PUBLICATION
ALTER SUBSCRIPTION ... ADD PUBLICATION
ALTER SUBSCRIPTION ... DROP PUBLICATION
ALTER SUBSCRIPTION ... SET PUBLICATION
These commands will perform the following actions:
Add newly published sequences that are not yet part of the subscription.
Remove sequences that are no longer included in the publication.
This ensures that sequence replication remains aligned with the current
state of the publication on the publisher side.
Note that the actual synchronization of sequence data/values will be
handled in a subsequent patch that introduces a dedicated sequence sync
worker.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
Currently there's no bug, because we have no code path where we
invalidate relcache entries where it'd cause a problem. But it's more
robust to do it this way in case we introduce such a path later, as some
Postgres forks reportedly already have.
Author: Daniil Davydov <3danissimo@gmail.com>
Reviewed-by: Stepan Neretin <slpmcf@gmail.com>
Discussion: https://postgr.es/m/CAJDiXgj3FNzAhV+jjPqxMs3jz=OgPohsoXFj_fh-L+nS+13CKQ@mail.gmail.com
This fixes an unlikely issue when fetching GROUPING SET results from
their internally stored hash tables. It was possible in rare cases that
the hash iterator would be set up incorrectly which could result in a
crash.
This was introduced in 4d143509c, so backpatch to v18.
Many thanks to Yuri Zamyatin for reporting and helping to debug this
issue.
Bug: #19078
Reported-by: Yuri Zamyatin <yuri@yrz.am>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/19078-dfd62f840a2c0766@postgresql.org
Backpatch-through: 18
Switch to using the English word here rather than using a verbified
function name.
The full word still fits within a single comment line, so it's probably
better just to use that instead of trying to shorten it, which might
cause confusion.
Author: Rafia Sabih <rafia.pghackers@gmail.com>
Discussion: https://postgr.es/m/CA+FpmFe7LnRF2NA_QfARjkSWme4mNt+Udwbh2Yb=zZm35Ji31w@mail.gmail.com
This information appears to have been unused since commit
c5b7ba4e67. We could not find any references in third-party code,
either.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aO_CyFRpbVMtgJWM%40nathan
To support the upcoming addition of a sequence synchronization worker,
this patch extracts common synchronization logic shared by table sync
workers and the new sequence sync worker into a dedicated file. This
modularization improves code reuse, maintainability, and clarity in the
logical workers framework.
Author: vignesh C <vignesh21@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Per-character pg_locale_t APIs. Useful for tsearch parsing and
potentially other places.
Significant overlap with the regc_wc_isalpha() and related functions
in regc_pg_locale.c, but this change leaves those intact for
now.
Discussion: https://postgr.es/m/0151ad01239e2cc7b3139644358cf8f7b9622ff7.camel@j-davis.com
Presently, these functions look up the relation's OID, lock it, and
then check privileges. Not only does this approach provide no
guarantee that the locked relation matches the arguments of the
lookup, but it also allows users to briefly lock relations for
which they do not have privileges, which might enable
denial-of-service attacks. This commit adjusts these functions to
use RangeVarGetRelidExtended(), which is purpose-built to avoid
both of these issues. The new RangeVarGetRelidCallback function is
somewhat complicated because it must handle both tables and
indexes, and for indexes, we must check privileges on the parent
table and lock it first. Also, it needs to handle a couple of
extremely unlikely race conditions involving concurrent OID reuse.
A downside of this change is that the coding doesn't allow for
locking indexes in AccessShare mode anymore; everything is locked
in ShareUpdateExclusive mode. Per discussion, the original choice
of lock levels was intended for a now defunct implementation that
used in-place updates, so we believe this change is okay.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/Z8zwVmGzXyDdkAXj%40nathan
Backpatch-through: 18
The log output functionality of log_autovacuum_min_duration applies to
both VACUUM and ANALYZE, so it is not possible to separate the VACUUM
and ANALYZE log output thresholds. Logs are likely to be output only for
VACUUM and not for ANALYZE.
Therefore, we decided to separate the threshold for log output of VACUUM
by autovacuum (log_autovacuum_min_duration) and the threshold for log
output of ANALYZE by autovacuum (log_autoanalyze_min_duration).
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Kasahara Tatsuhito <kasaharatt@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/CAOzEurQtfV4MxJiWT-XDnimEeZAY+rgzVSLe8YsyEKhZcajzSA@mail.gmail.com
If inside an EPQ recheck, ExecScanFetch would run the recheck method
function for foreign/custom joins even if they aren't descendant nodes
in the EPQ recheck plan tree, which is problematic at least in the
foreign-join case, because such a foreign join isn't guaranteed to have
an alternative local-join plan required for running the recheck method
function; in the postgres_fdw case this could lead to a segmentation
fault or an assert failure in an assert-enabled build when running the
recheck method function.
Even if inside an EPQ recheck, any scan nodes that aren't descendant
ones in the EPQ recheck plan tree should be normally processed by using
the access method function; fix by modifying ExecScanFetch so that if
inside an EPQ recheck, it runs the recheck method function for
foreign/custom joins that are descendant nodes in the EPQ recheck plan
tree as before and runs the access method function for foreign/custom
joins that aren't.
This fix also adds to postgres_fdw an isolation test for an EPQ recheck
that caused issues stated above.
Oversight in commit 385f337c9.
Reported-by: Kristian Lejao <kristianlejao@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAD21AoBpo6Gx55FBOW+9s5X=nUw3Xpq64v35fpDEKsTERnc4TQ@mail.gmail.com
Backpatch-through: 13
This patch replaces ALTER SUBSCRIPTION REFRESH with
ALTER SUBSCRIPTION REFRESH PUBLICATION in comments and error messages to
improve clarity and support future extensibility. The change aligns with
upcoming addition REFRESH SEQUENCES for sequence synchronization.
Author: vignesh C <vignesh21@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
These functions appeared prominently in a profile of a patch that sets
the visibility map on-access. Inline them to remove call overhead and
make them cheaper to use in hot paths.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2wk7jo4m4qwh5sn33pfgerdjfujebbccsmmlownybddbh6nawl%40mdyyqpqzxjek
add323da40 altered xl_heap_prune, changing the WAL format, but
neglected to bump XLOG_PAGE_MAGIC. Do so now.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Kirill Reshke <reshkekirill@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aO3Gw6hCAZFUd5ab%40paquier.xyz
get_pg_version() is able to return a version number, that can be used
for comparisons based on PG_VERSION_NUM. A macro is added to convert
the result to a major version number, to work with PG_MAJORVERSION_NUM.
It is possible to pass to the routine an optional argument, where the
contents retrieved from PG_VERSION are saved. This requirement matters
for some of the frontend code (one example: pg_upgrade wants that for
tablespace paths with a version number strictly older than v10).
This will be used by a set of follow-up patches, to be consumed in
various frontend tools that duplicate a logic similar to do what this
new routine does, like:
- pg_resetwal
- pg_combinebackup
- pg_createsubscriber
- pg_upgrade
This routine supports both the post-v10 version number and the older
flavor (aka 9.6), as required at least by pg_upgrade.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
Instead of emitting a separate XLOG_HEAP2_VISIBLE WAL record for each
page that becomes all-visible in vacuum's third phase, specify the VM
changes in the already emitted XLOG_HEAP2_PRUNE_VACUUM_CLEANUP record.
Visibility checks are now performed before marking dead items unused.
This is safe because the heap page is held under exclusive lock for the
entire operation.
This reduces the number of WAL records generated by VACUUM phase III by
up to 50%.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZMw6Npd_qm2KM%2BFwQ3cMOMx1Dh3VMhp8-V7SOLxdK9-g%40mail.gmail.com
log_error() would probably fail completely if used, and would
certainly print garbage for anything that needed to be interpolated
into the message, because it was failing to use the correct printing
subroutine for a va_list argument.
This bug likely went undetected because the error cases this code
is used for are rarely exercised - they only occur when Windows
security API calls fail catastrophically (out of memory, security
subsystem corruption, etc).
The FRONTEND variant can be fixed just by calling vfprintf()
instead of fprintf(). However, there was no va_list variant
of write_stderr(), so create one by refactoring that function.
Following the usual naming convention for such things, call
it vwrite_stderr().
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAF+pBj8goe4fRmZ0V3Cs6eyWzYLvK+HvFLYEYWG=TzaM+tWPnw@mail.gmail.com
Backpatch-through: 13
Instead of emitting a separate WAL XLOG_HEAP2_VISIBLE record for setting
bits in the VM, specify the VM block changes in the
XLOG_HEAP2_MULTI_INSERT record.
This halves the number of WAL records emitted by COPY FREEZE.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZMw6Npd_qm2KM%2BFwQ3cMOMx1Dh3VMhp8-V7SOLxdK9-g%40mail.gmail.com
This patch adds support for the ALL SEQUENCES clause in publications,
enabling synchronization/replication of all sequences that is useful for
upgrades.
Publications can now include all sequences via FOR ALL SEQUENCES.
psql enhancements:
\d shows publications for a given sequence.
\dRp indicates if a publication includes all sequences.
ALL SEQUENCES can be combined with ALL TABLES, but not with other options
like TABLE or TABLES IN SCHEMA. We can extend support for more granular
clauses in future.
The view pg_publication_sequences provides information about the mapping
between publications and sequences.
This patch enables publishing of sequences; subscriber-side support will
be added in upcoming patches.
Author: vignesh C <vignesh21@gmail.com>
Author: Tomas Vondra <tomas@vondra.me>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously StrategyGetBuffer() acquired the buffer header spinlock for every
buffer, whether it was reusable or not. If reusable, it'd be returned, with
the lock held, to GetVictimBuffer(), which then would pin the buffer with
PinBuffer_Locked(). That's somewhat violating the spirit of the guidelines for
holding spinlocks (i.e. that they are only held for a few lines of consecutive
code) and necessitates using PinBuffer_Locked(), which scales worse than
PinBuffer() due to holding the spinlock. This alone makes it worth changing
the code.
However, the main reason to change this is that a future commit will make
PinBuffer_Locked() slower (due to making UnlockBufHdr() slower), to gain
scalability for the much more common case of pinning a pre-existing buffer. By
pinning the buffer with a single atomic operation, iff the buffer is reusable,
we avoid any potential regression for miss-heavy workloads. There strictly are
fewer atomic operations for each potential buffer after this change.
The price for this improvement is that freelist.c needs two CAS loops and
needs to be able to set up the resource accounting for pinned buffers. The
latter is achieved by exposing a new function for that purpose from bufmgr.c,
that seems better than exposing the entire private refcount infrastructure.
The improvement seems worth the complexity.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
We're planning to merge buffer content locks into BufferDesc.state. To reduce
the size of that patch, centralize calls to BufferDescriptorGetContentLock().
The biggest part of the change is in assertions, by introducing
BufferIsLockedByMe[InMode]() (and removing BufferIsExclusiveLocked()). This
seems like an improvement even without aforementioned plans.
Additionally replace some direct calls to LWLockAcquire() with calls to
LockBuffer().
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
This commit introduces a new column mem_exceeded_count to the
pg_stat_replication_slots view. This counter tracks how often the
memory used by logical decoding exceeds the logical_decoding_work_mem
limit. The new statistic helps users determine whether exceeding the
logical_decoding_work_mem limit is a rare occurrences or a frequent
issue, information that wasn't available through existing statistics.
Bumps catversion.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/978D21E8-9D3B-40EA-A4B1-F87BABE7868C@yesql.se
In the same spirit as 3bf905692, assume that all compilers we still
support provide the NAN macro, and get rid of workarounds for that.
The C standard allows implementations to omit NAN if the underlying
float arithmetic lacks quiet (non-signaling) NaNs. However, we've
required that feature for years: the workarounds only supported
lack of the macro, not lack of the functionality. I put in a
compile-time #error if there's no macro, just for clarity.
Also fix up the copies of these functions in ecpglib, and leave
a breadcrumb for the next hacker who touches them.
History of the hacks being removed here can be found in commits
1bc2d544b, 4d17a2146, cec8394b5.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1952095.1759764279@sss.pgh.pa.us
Extensions can stash data computed at plan time into this list using
planner_shutdown_hook (or perhaps other mechanisms) and then access
it from any code that has access to the PlannedStmt (such as explain
hooks), allowing for extensible debugging and instrumentation of
plans.
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
These hooks allow plugins to get control at the earliest point at
which the PlannerGlobal object is fully initialized, and then just
before it gets destroyed. This is useful in combination with the
extendable plan state facilities (see extendplan.h) and perhaps for
other purposes as well.
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
This allows extensions to have access to any data they've stored
in the ExplainState during planning. Unfortunately, it won't help
with EXPLAIN EXECUTE is used, but since that case is less common,
this still seems like an improvement.
Since planner() has quite a few arguments now, also add some
documentation of those arguments and the return value.
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
Eager aggregation is a query optimization technique that partially
pushes aggregation past a join, and finalizes it once all the
relations are joined. Eager aggregation may reduce the number of
input rows to the join and thus could result in a better overall plan.
In the current planner architecture, the separation between the
scan/join planning phase and the post-scan/join phase means that
aggregation steps are not visible when constructing the join tree,
limiting the planner's ability to exploit aggregation-aware
optimizations. To implement eager aggregation, we collect information
about aggregate functions in the targetlist and HAVING clause, along
with grouping expressions from the GROUP BY clause, and store it in
the PlannerInfo node. During the scan/join planning phase, this
information is used to evaluate each base or join relation to
determine whether eager aggregation can be applied. If applicable, we
create a separate RelOptInfo, referred to as a grouped relation, to
represent the partially-aggregated version of the relation and
generate grouped paths for it.
Grouped relation paths can be generated in two ways. The first method
involves adding sorted and hashed partial aggregation paths on top of
the non-grouped paths. To limit planning time, we only consider the
cheapest or suitably-sorted non-grouped paths in this step.
Alternatively, grouped paths can be generated by joining a grouped
relation with a non-grouped relation. Joining two grouped relations
is currently not supported.
To further limit planning time, we currently adopt a strategy where
partial aggregation is pushed only to the lowest feasible level in the
join tree where it provides a significant reduction in row count.
This strategy also helps ensure that all grouped paths for the same
grouped relation produce the same set of rows, which is important to
support a fundamental assumption of the planner.
For the partial aggregation that is pushed down to a non-aggregated
relation, we need to consider all expressions from this relation that
are involved in upper join clauses and include them in the grouping
keys, using compatible operators. This is essential to ensure that an
aggregated row from the partial aggregation matches the other side of
the join if and only if each row in the partial group does. This
ensures that all rows within the same partial group share the same
"destiny", which is crucial for maintaining correctness.
One restriction is that we cannot push partial aggregation down to a
relation that is in the nullable side of an outer join, because the
NULL-extended rows produced by the outer join would not be available
when we perform the partial aggregation, while with a
non-eager-aggregation plan these rows are available for the top-level
aggregation. Pushing partial aggregation in this case may result in
the rows being grouped differently than expected, or produce incorrect
values from the aggregate functions.
If we have generated a grouped relation for the topmost join relation,
we finalize its paths at the end. The final paths will compete in the
usual way with paths built from regular planning.
The patch was originally proposed by Antonin Houska in 2017. This
commit reworks various important aspects and rewrites most of the
current code. However, the original patch and reviews were very
useful.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Antonin Houska <ah@cybertec.at> (in an older version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me> (in an older version)
Reviewed-by: Andy Fan <zhihuifan1213@163.com> (in an older version)
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> (in an older version)
Discussion: https://postgr.es/m/CAMbWs48jzLrPt1J_00ZcPZXWUQKawQOFE8ROc-ADiYqsqrpBNw@mail.gmail.com
This patch reuses the existing aggtransspace in pg_aggregate to
signal that an aggregate's transition state can grow unboundedly. If
aggtransspace is set to a negative value, it now indicates that the
transition state may consume unpredictable or large amounts of memory,
such as in aggregates like array_agg or string_agg that accumulate
input rows.
This information can be used by the planner to avoid applying
memory-sensitive optimizations (e.g., eager aggregation) when there is
a risk of excessive memory usage during partial aggregation.
Bump catalog version.
Per idea from Robert Haas, though applied differently than originally
suggested.
Discussion: https://postgr.es/m/CA+TgmoYbkvYwLa+1vOP7RDY7kO2=A7rppoPusoRXe44VDOGBPg@mail.gmail.com
It is possible to call pg_stat_reset_single_function_counters() for a
single function, but the reset time was missing the system view showing
its statistics. Like all the fields of pg_stat_user_functions, the GUC
track_functions needs to be enabled to show the statistics about
function executions.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, as a result of the new field added to
PgStat_StatFuncEntry.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aONjnsaJSx-nEdfU@paquier.xyz
The INFINITY macro is always defined per C99 standard, so this should
mean we can now get rid of the workaround code for when that macro isn't
defined.
Also, delete the (now unneeded) #pragma code which was disabling a
compiler warning in MSVC. There was a comment explaining why the #pragma
was placed outside the function body to work around a MSVC compiler bug,
but the link explaining that was dead, as reported by jian he.
Author: David Rowley <dgrowleyml@gmail.com>
Reported-by: jian he <jian.universality@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxGARYETnNwtCK7QC0zE_7gq-tfN0mME=gT5rTNtC=VSHQ@mail.gmail.com
Instead, use the new mechanism that allows planner extensions to store
private state inside a PlannerInfo, treating GEQO as an in-core planner
extension. This is a useful test of the new facility, and also buys
back a few bytes of storage.
To make this work, we must remove innerrel_is_unique_ext's hack of
testing whether join_search_private is set as a proxy for whether
the join search might be retried. Add a flag that extensions can
use to explicitly signal their intentions instead.
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
Extension that make extensive use of planner hooks may want to
coordinate their efforts, for example to avoid duplicate computation,
but that's currently difficult because there's no really good way to
pass data between different hooks.
To make that easier, allow for storage of extension-managed private
state in PlannerGlobal, PlannerInfo, and RelOptInfo, along very
similar lines to what we have permitted for ExplainState since commit
c65bc2e1d1.
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
Previously, subqueries were given names only after they were planned,
which makes it difficult to use information from a previous execution of
the query to guide future planning. If, for example, you knew something
about how you want "InitPlan 2" to be planned, you won't know whether
the subquery you're currently planning will end up being "InitPlan 2"
until after you've finished planning it, by which point it's too late to
use the information that you had.
To fix this, assign each subplan a unique name before we begin planning
it. To improve consistency, use textual names for all subplans, rather
than, as we did previously, a mix of numbers (such as "InitPlan 1") and
names (such as "CTE foo"), and make sure that the same name is never
assigned more than once.
We adopt the somewhat arbitrary convention of using the type of sublink
to set the plan name; for example, a query that previously had two
expression sublinks shown as InitPlan 2 and InitPlan 1 will now end up
named expr_1 and expr_2. Because names are assigned before rather than
after planning, some of the regression test outputs show the numerical
part of the name switching positions: what was previously SubPlan 2 was
actually the first one encountered, but we finished planning it later.
We assign names even to subqueries that aren't shown as such within the
EXPLAIN output. These include subqueries that are a FROM clause item or
a branch of a set operation, rather than something that will be turned
into an InitPlan or SubPlan. The purpose of this is to make sure that,
below the topmost query level, there's always a name for each subquery
that is stable from one planning cycle to the next (assuming no changes
to the query or the database schema).
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: http://postgr.es/m/3641043.1758751399@sss.pgh.pa.us
The hex_encode() and hex_decode() functions serve as the workhorses
for hexadecimal data for bytea's text format conversion functions,
and some workloads are sensitive to their performance. This commit
adds new implementations that use routines from port/simd.h, which
testing indicates are much faster for larger inputs. For small or
invalid inputs, we fall back on the existing scalar versions.
Since we are using port/simd.h, these optimizations apply to both
x86-64 and AArch64.
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Chiranmoy Bhattacharya <chiranmoy.bhattacharya@fujitsu.com>
Co-authored-by: Susmitha Devanga <devanga.susmitha@fujitsu.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/aLhVWTRy0QPbW2tl%40nathan
This patch enhances the pg_get_sequence_data function to include the
page-level LSN (Log Sequence Number) of the sequence. This additional
metadata will be used by upcoming patches to support synchronization
of sequences during logical replication.
By exposing the LSN, we enable more accurate tracking of sequence
changes, which is essential for maintaining consistency across
replicated nodes.
Author: vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
All the other structures describe the list of blocks used, and in the
case of a GIN_INSERT_LISTPAGE record block 0 refers to a list page with
the items added to it.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CALdSSPgk=9WRoXhZy5fdk+T1hiau7qbL_vn94w_L1N=gtEdbsg@mail.gmail.com
It is possible to call pg_stat_reset_single_table_counters() on a
relation (index or table) but the reset time was missing from the system
views showing their statistics.
This commit adds the reset time as an attribute of pg_stat_all_tables,
pg_stat_all_indexes, and other relations related to them.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, as a result of the new field added to
PgStat_StatTabEntry.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aN8l182jKxEq1h9f@paquier.xyz
Presently, the SIMD implementation of this function uses unsigned
saturating subtraction to find bytes less than or equal to the
given value, which is a workaround for the lack of unsigned
comparison instructions on some architectures. However, Neon
offers vminvq_u8(), which returns the minimum (unsigned) value in
the vector. This commit adds a Neon-specific implementation that
uses vminvq_u8() to optimize vector8_has_le() on AArch64.
In passing, adjust the SSE2 implementation to use vector8_min() and
vector8_eq() to find values less than or equal to the given value.
This was the only use of vector8_ssub(), so it has been removed.
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/aNHDNDSHleq0ogC_%40nathan
Add IGNORE NULLS/RESPECT NULLS option (null treatment clause) to lead,
lag, first_value, last_value and nth_value window functions. If
unspecified, the default is RESPECT NULLS which includes NULL values
in any result calculation. IGNORE NULLS ignores NULL values.
Built-in window functions are modified to call new API
WinCheckAndInitializeNullTreatment() to indicate whether they accept
IGNORE NULLS/RESPECT NULLS option or not (the API can be called by
user defined window functions as well). If WinGetFuncArgInPartition's
allowNullTreatment argument is true and IGNORE NULLS option is given,
WinGetFuncArgInPartition() or WinGetFuncArgInFrame() will return
evaluated function's argument expression on specified non NULL row (if
it exists) in the partition or the frame.
When IGNORE NULLS option is given, window functions need to visit and
evaluate same rows over and over again to look for non null rows. To
mitigate the issue, 2-bit not null information array is created while
executing window functions to remember whether the row has been
already evaluated to NULL or NOT NULL. If already evaluated, we could
skip the evaluation work, thus we could get better performance.
Author: Oliver Ford <ojford@gmail.com>
Co-authored-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Krasiyan Andreev <krasiyan@gmail.com>
Reviewed-by: Andrew Gierth <andrew@tao11.riddles.org.uk>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Fetter <david@fetter.org>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Discussion: https://postgr.es/m/flat/CAGMVOdsbtRwE_4+v8zjH1d9xfovDeQAGLkP_B6k69_VoFEgX-A@mail.gmail.com
Stop including utils/relcache.h in access/genam.h, and stop including
htup_details.h in nodes/tidbitmap.h. Both these files (genam.h and
tidbitmap.h) are widely used in other header files, so it's in our best
interest that they remain as lean as reasonable.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202509291356.o5t6ny2hoa3q@alvherre.pgsql
GROUP BY ALL is a form of GROUP BY that adds any TargetExpr that does
not contain an aggregate or window function into the groupClause of
the query, making it exactly equivalent to specifying those same
expressions in an explicit GROUP BY list.
This feature is useful for certain kinds of data exploration. It's
already present in some other DBMSes, and the SQL committee recently
accepted it into the standard, so we can be reasonably confident in
the syntax being stable. We do have to invent part of the semantics,
as the standard doesn't allow for expressions in GROUP BY, so they
haven't specified what to do with window functions. We assume that
those should be treated like aggregates, i.e., left out of the
constructed GROUP BY list.
In passing, wordsmith some existing documentation about GROUP BY,
and update some neglected synopsis entries in select_into.sgml.
Author: David Christensen <david@pgguru.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAHM0NXjz0kDwtzoe-fnHAqPB1qA8_VJN0XAmCgUZ+iPnvP5LbA@mail.gmail.com
Stats kinds can set a new option called "track_entry_count" (disabled by
default, available for variable-numbered stats) that will make pgstats
track the number of entries that exist in its shared hashtable.
As there is only one code path where a new entry is added, and one code
path where entries are freed, the count tracking is straight-forward in
its implementation. Reads of these counters are optimistic, and may
change across two calls. The counter is incremented when an entry is
created (not when reused), and is decremented when an entry is freed
from the hashtable (marked for drop with its refcount reaching 0), which
is something that pgstats decides internally.
A first use case of this facility would be pg_stat_statements, where we
need to be able to cap the number of entries that would be stored in the
shared hashtable, based on its "max" GUC. The module currently relies
on hash_get_num_entries(), which offers a cheap way to count how many
entries are in its hash table, but we cannot do that in pgstats for
variable-sized stats kinds as a single hashtable is used for all the
stats kinds. Independently of PGSS, this is useful for other custom
stats kinds that want to cap, control, or track the number of entries
they have, without depending on a potentially expensive sequential scan
to know the number of entries while holding an extra exclusive lock.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Keisuke Kuroda <keisuke.kuroda.3862@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aMPKWR81KT5UXvEr@paquier.xyz
It had always been intended that this already works correctly as
pg_unreachable() uses __assume(0) on MSVC, and that directs the compiler
in a way so it knows that a given function won't return. However, with
ereport_domain(), it didn't work...
It's now understood that the failure to determine that elog(ERROR) does not
return comes from the inability of the MSVC compiler to detect the "const
int elevel_" is the same as the "elevel" macro parameter. MSVC seems to be
unable to make the "if (elevel_ >= ERROR) branch constantly-true when the
macro is used with any elevel >= ERROR, therefore the pg_unreachable() is
seen to only be present in a *conditional* branch rather than present
*unconditionally*.
While there seems to be no way to force the compiler into knowing that
elevel_ is equal to elevel within the ereport_domain() macro, there is a
way in C11 to determine if the elevel parameter is a compile-time
constant or not. This is done via some hackery using the _Generic()
intrinsic function, which gives us functionality similar to GCC's
__builtin_constant_p(), albeit only for integers.
Here we define pg_builtin_integer_constant_p() for this purpose.
Callers can check for availability via HAVE_PG_BUILTIN_INTEGER_CONSTANT_P.
ereport_domain() has been adjusted to use
pg_builtin_integer_constant_p() instead of __builtin_constant_p().
It's not quite clear at this stage if this now allows us to forego doing
the likes of "return NULL; /* keep compiler quiet */" as there may be other
compilers in use that have similar struggles. It's just a matter of time
before someone commits a function that does not "return" a value after
an elog(ERROR). Let's make time and lack of complaints about said commit
be the judge of if we need to continue the "/* keep compiler quiet */"
palaver.
Author: David Rowley <drowleyml@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvom02B_XNVSkvxznVUyZbjGAR+5myA89ZcbEd3=PA9UcA@mail.gmail.com
Use our established coding pattern to reduce maintenance pain when
adding other per-process-type characteristics.
Like PG_KEYWORD, PG_CMDTAG, PG_RMGR.
To keep the strings translatable, the relevant makefile now also scans
src/include for this specific file. I didn't want to have it scan all
.h files, as then gettext would have to scan all header files. I didn't
find any way to affect the meson behavior in this respect though.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Co-authored-by: Jonathan Gonzalez V. <jonathan.abdiel@gmail.com>
Discussion: https://postgr.es/m/202507151830.dwgz5nmmqtdy@alvherre.pgsql
... which silently propagates a lot of headers into many places
via pgstat.h, as evidenced by the variety of headers that this patch
needs to add to seemingly random places. Add a minimum of typedefs to
conflict.h to be able to remove execnodes.h, and fix the fallout.
Backpatch to 18, where conflict.h first appeared.
Discussion: https://postgr.es/m/202509191927.uj2ijwmho7nv@alvherre.pgsql
This commit corrects several issues in function comments:
* The parameter "rel" was incorrectly referred to as "relation" in the comments
for table_tuple_delete(), table_tuple_update(), and table_tuple_lock().
* In table_tuple_delete(), "changingPart" was listed as an output parameter
in the comments but is actually input.
* In table_tuple_update(), "slot" was listed as an input parameter
in the comments but is actually output.
* The comment for "update_indexes" in table_tuple_update() was mis-indented.
* The comments for heap_lock_tuple() incorrectly referenced a non-existent
"tid" parameter.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2nB6Ay8g=KEn7L3qbYX_4+sLk9XOMkV0XZqHR4cTY8ZvQ@mail.gmail.com
Result nodes now include an RTI set, which is only non-NULL when they
have no subplan, and is taken from the relid set of the RelOptInfo that
the Result is generating. ExplainPreScanNode now takes notice of these
RTIs, which means that a few things get schema-qualified in the
regression tests that previously did not. This makes the output more
consistent between cases where some part of the plan tree is replaced by
a Result node and those where this does not happen.
Likewise, pg_overexplain's EXPLAIN (RANGE_TABLE) now displays the RTIs
stored in a Result node just as it already does for other RTI-bearing
node types.
Result nodes also now include a result_reason, which tells us something
about why the Result node was inserted. Using that information, EXPLAIN
now emits, where relevant, a "Replaces" line describing the origin of
a Result node.
The purpose of these changes is to allow code that inspects a Plan
tree to understand the origin of Result nodes that appear therein.
Discussion: http://postgr.es/m/CA+TgmoYeUZePZWLsSO+1FAN7UPePT_RMEZBKkqYBJVCF1s60=w@mail.gmail.com
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
The lossy-counting algorithm that ANALYZE uses to identify most-common
array elements has a notion of cutoff frequency: elements with
frequency greater than that are guaranteed to be collected, elements
with smaller frequencies are not. In cases where we find fewer MCEs
than the stats target would permit us to store, the cutoff frequency
provides valuable additional information, to wit that there are no
non-MCEs with frequency greater than that. What the selectivity
estimation functions actually use the "minfreq" entry for is as a
ceiling on the possible frequency of non-MCEs, so using the cutoff
rather than the lowest stored MCE frequency provides a tighter bound
and more accurate estimates.
Therefore, instead of redundantly storing the minimum observed MCE
frequency, store the cutoff frequency when there are fewer tracked
values than we want. (When there are more, then of course we cannot
assert that no non-stored elements are above the cutoff frequency,
since we're throwing away some that are; so we still use the
minimum stored frequency in that case.)
Notably, this works even when none of the values are common enough
to be called MCEs. In such cases we previously stored nothing in
the STATISTIC_KIND_MCELEM pg_statistic slot, which resulted in the
selectivity functions falling back to default estimates. So in that
case we want to construct a STATISTIC_KIND_MCELEM entry that contains
no "values" but does have "numbers", to wit the three extra numbers
that the MCELEM entry type defines. A small obstacle is that
update_attstats() has traditionally stored a null, not an empty array,
when passed zero "values" for a slot. That gives rise to an MCELEM
entry that get_attstatsslot() will spit up on. The least risky
solution seems to be to adjust update_attstats() so that it will emit
a non-null (but possibly empty) array when the passed stavalues array
pointer isn't NULL, rather than conditioning that on numvalues > 0.
In other existing cases I don't believe that that changes anything.
For consistency, handle the stanumbers array the same way.
In passing, improve the comments in routines that use
STATISTIC_KIND_MCELEM data. Particularly, explain why we use
minfreq / 2 not minfreq as the estimate for non-MCE values.
Thanks to Matt Long for the suggestion that we could apply this
idea even when there are more than zero MCEs.
Reported-by: Mark Frost <FROSTMAR@uk.ibm.com>
Reported-by: Matt Long <matt@mattlong.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/PH3PPF1C905D6E6F24A5C1A1A1D8345B593E16FA@PH3PPF1C905D6E6.namprd15.prod.outlook.com
Commit 216a784829 introduced parallel apply workers, allowing multiple
processes to share a replication origin. To support this,
replorigin_session_setup() was extended to accept a pid argument
identifying the process using the origin.
This commit exposes that capability through the SQL interface function
pg_replication_origin_session_setup() by adding an optional pid parameter.
This enables multiple processes to coordinate replication using the same
origin when using SQL-level replication functions.
This change allows the non-builtin logical replication solutions to
implement parallel apply for large transactions.
Additionally, an existing internal error was made user-facing, as it can
now be triggered via the exposed SQL API.
Author: Doruk Yilmaz <doruk@mixrank.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CAMPB6wfe4zLjJL8jiZV5kjjpwBM2=rTRme0UCL7Ra4L8MTVdOg@mail.gmail.com
Discussion: https://postgr.es/m/CAE2gYzyTSNvHY1+iWUwykaLETSuAZsCWyryokjP6rG46ZvRgQA@mail.gmail.com
This change is a tighter rework of 7d85d87f4d, which tried to improve
the code so as it would work should PgStat_HashKey gain new fields that
create padding bytes. However, the previous change is proving to not be
enough as some code paths of pgstats do not pass PgStat_HashKey by
reference (valgrind would warn when padding is added to the structure,
through a new field).
Per discussion, let's document and check that PgStat_HashKey has no
padding rather than try to complicate the code of pgstats so as it is
able to work around that.
This removes a couple of memset(0) calls that should not be required.
While on it, this commit adds a static assertion checking that no
padding is introduced in the structure, by checking that the size of
PgStat_HashKey matches with the sum of the size of all its fields.
The object ID part of the hash key is already 8 bytes, which should be
plenty enough already. A comment is added to discourage the addition of
new fields.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0t9omat+HVSakJXwTMWvhpYFcAZb41RPWKwrKFUgmAFBQ@mail.gmail.com
Commit 2a600a93 made Datum 8 bytes wide everywhere. It was no longer
appropriate to use TypeSizeT on 32 bit systems, and JIT compilation
would fail with various type check errors. Introduce a separate
LLVMTypeRef with the name TypeDatum. TypeSizeT is still used in some
places for actual size_t values.
Reported-by: Dmitry Mityugov <d.mityugov@postgrespro.ru>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Dmitry Mityugov <d.mityugov@postgrespro.ru>
Discussion: https://postgr.es/m/0a9f0be59171c2e8f1b3bc10f4fcf267%40postgrespro.ru
Up to now we've contented ourselves with a one-size-fits-all error
hint when we fail to find any match to a function or procedure call.
That was mostly okay in the beginning, but it was never great, and
since the introduction of named arguments it's really not adequate.
We at least ought to distinguish "function name doesn't exist" from
"function name exists, but not with those argument names". And the
rules for named-argument matching are arcane enough that some more
detail seems warranted if we match the argument names but the call
still doesn't work.
This patch creates a framework for dealing with these problems:
FuncnameGetCandidates and related code will now pass back a bitmask of
flags showing how far the match succeeded. This allows a considerable
amount of granularity in the reports. The set-bits-in-a-bitmask
approach means that when there are multiple candidate functions, the
report will reflect the match(es) that got the furthest, which seems
correct. Also, we can avoid mentioning "maybe add casts" unless
failure to match argument types is actually the issue.
Extend the same return-a-bitmask approach to OpernameGetCandidates.
The issues around argument names don't apply to operator syntax,
but it still seems worth distinguishing between "there is no
operator of that name" and "we couldn't match the argument types".
While at it, adjust these messages and related ones to more strictly
separate "detail" from "hint", following our message style guidelines'
distinction between those.
Reported-by: Dominique Devienne <ddevienne@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/1756041.1754616558@sss.pgh.pa.us
Fix for commit 3c86223c99. That commit moved the typedef of pg_int64
from postgres_ext.h to libpq-fe.h, because the only remaining place
where it might be used is libpq users, and since the type is obsolete,
the intent was to limit its scope.
The problem is that if someone builds an extension against an
older (pre-PG18) server version and a new (PG18) libpq, they might get
two typedefs, depending on include file order. This is not allowed
under C99, so they might get warnings or errors, depending on the
compiler and options. The underlying types might also be
different (e.g., long int vs. long long int), which would also lead to
errors. This scenario is plausible when using the standard Debian
packaging, which provides only the newest libpq but per-major-version
server packages.
The fix is to undo that part of commit 3c86223c99. That way, the
typedef is in the same header file across versions. At least, this is
the safest fix doable before PostgreSQL 18 releases.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/25144219-5142-4589-89f8-4e76948b32db%40eisentraut.org
Commit 7202d72787 added in passing some const qualifiers, but the one
on the postmaster_child_launch() startup_data argument was incorrect,
because the function itself modifies the pointed-to data. This is
hidden from the compiler because of casts. The qualifiers on the
functions called by postmaster_child_launch() are still correct.
fmgr.h defined some types such as fmNodePtr which is just Node *, but
it made its own types to avoid having to include various header files.
With C11, we can now instead typedef the original names without fear
of conflicts.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/10d32190-f31b-40a5-b177-11db55597355@eisentraut.org
There are a number of forward declarations that use struct but not the
customary typedef, because that could have led to repeat typedefs,
which was not allowed. This is now allowed in C11, so we can update
these to provide the typedefs as well, so that the later uses of the
types look more consistent.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/10d32190-f31b-40a5-b177-11db55597355@eisentraut.org
Per discussion, this compiler suite is no longer maintained, and
it has not been able to compile PostgreSQL since at least PostgreSQL
17.
This removes all the remaining support code for this compiler.
Note that the Solaris operating system continues to be supported, but
using GCC as the compiler.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/a0f817ee-fb86-483a-8a14-b6f7f5991b6e%40eisentraut.org
The typedef Relids (Bitmapset *) is intended to represent set of
relation identifiers, but was incorrectly used in several places to
store sets of attribute numbers. This is my oversight in e2debb643.
Fix that by replacing such usages with Bitmapset * to reflect the
correct semantics.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3LJhp_xriXf39iCz0TsK+M-2biuhDhpLC6Baxw8+ZYT3A@mail.gmail.com
In EXEC_BACKEND builds, GetNamedLWLockTranche() can segfault when
called outside of the postmaster process, as it might access
NamedLWLockTrancheRequestArray, which won't be initialized. Given
the lack of reports, this is apparently unusual, presumably because
it is usually called from a shmem_startup_hook like this:
mystruct = ShmemInitStruct(..., &found);
if (!found)
{
mystruct->locks = GetNamedLWLockTranche(...);
...
}
This genre of shmem_startup_hook evades the aforementioned
segfaults because the struct is initialized in the postmaster, so
all other callers skip the !found path.
We considered modifying the documentation or requiring
GetNamedLWLockTranche() to be called from the postmaster, but
ultimately we decided to simply move the request array to shared
memory (and add it to the BackendParameters struct), thereby
allowing calls outside postmaster on all platforms. Since the main
shared memory segment is initialized after accepting LWLock tranche
requests, postmaster builds the request array in local memory first
and then copies it to shared memory later.
Given the lack of reports, back-patching seems unnecessary.
Reported-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0v1_15QPg5Sqd2Qz5rh_qcsyCeHHmRDY89xVHcy2yt5BQ%40mail.gmail.com
The comment mistakenly had "the others" for "the other", but this
commit also reorders the comment so it matches the macros below. Now we
describe the levels in increasing strictness. In addition, it seems
easier to follow if we introduce one level at a time, rather than
describing two, followed by "the other" (and then jumping back to one of
the first two). Finally, reword the sentence about the purpose of the
macros, which was slightly off-point.
Author: Paul Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Rustam ALLAKOV <rustamallakov@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+renyUp=xja80rBaB6NpY3RRdi750y046x28bo_xg29zKY72Q@mail.gmail.com
hash_xlog.h included descriptions for the blocks used in WAL records
that were was not completely consistent with how the records are
generated, with one block missing for SQUEEZE_PAGE, and inconsistent
descriptions used for block 0 in VACUUM_ONE_PAGE and MOVE_PAGE_CONTENTS.
This information was incorrect since c11453ce0a, cross-checking the
logic for the record generation.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CALdSSPj1j=a1d1hVA3oabRFz0hSU3KKrYtZPijw4UPUM7LY9zw@mail.gmail.com
Backpatch-through: 13
GucSource_Names was documented as being in guc.c, but since 0a20ff54f5
it is located in guc_tables.c. The reference to the location of
GucSource_Names is important, as GucSource needs to be kept in sync with
GucSource_Names.
Author: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwYPgAHWPYjPzK7iXzhSZ6MKR8w20_Nz7ZXpOvx=kZbs7A@mail.gmail.com
Backpatch-through: 16
Instead of building a separate memory context that's used just
for running hash functions, make the hash functions run in the
per-tuple context of the node's innerecontext. This saves a
little space at runtime, and it avoids needing to reset two
contexts instead of one inside buildSubPlanHash's main loop.
This largely reverts commit 133924e13. That's safe to do now
because bf6c614a2 decoupled the evaluation context used by
TupleHashTableMatch from that used for hash function evaluation,
so that there's no longer a risk of resetting the innerecontext
too soon.
Per discussion of bug #19040, although this is not directly
a fix for that.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Haiyang Li <mohen.lhy@alibaba-inc.com>
Reviewed-by: Fei Changhong <feichanghong@qq.com>
Discussion: https://postgr.es/m/19040-c9b6073ef814f48c@postgresql.org
This adds 3 new variants of the random() function:
random(min date, max date) returns date
random(min timestamp, max timestamp) returns timestamp
random(min timestamptz, max timestamptz) returns timestamptz
Each returns a random value x in the range min <= x <= max.
Author: Damien Clochard <damien@dalibo.info>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/f524d8cab5914613d9e624d9ce177d3d@dalibo.info
f83d709760 refactored xl_heap_prune and added an unused member,
reason. While PruneReason is used when constructing this WAL record to
set the WAL record definition, it doesn't need to be stored in a
separate field in the record. Remove it.
We won't backport this, since modifying an exposed struct definition to
remove an unused field would do more harm than good.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/tvvtfoxz5ykpsctxjbzxg3nldnzfc7geplrt2z2s54pmgto27y%40hbijsndifu45
This commit fixes three issues:
1) When a disabled subscription is created with retain_dead_tuples set to true,
the launcher is not woken up immediately, which may lead to delays in creating
the conflict detection slot.
Creating the conflict detection slot is essential even when the subscription is
not enabled. This ensures that dead tuples are retained, which is necessary for
accurately identifying the type of conflict during replication.
2) Conflict-related data was unnecessarily retained when the subscription does
not have a table.
3) Conflict-relevant data could be prematurely removed before applying
prepared transactions on the publisher that are in the commit critical section.
This issue occurred because the backend executing COMMIT PREPARED was not
accounted for during the computation of oldestXid in the commit phase on
the publisher. As a result, the subscriber could advance the conflict
slot's xmin without waiting for such COMMIT PREPARED transactions to
complete.
We fixed this issue by identifying prepared transactions that are in the
commit critical section during computation of oldestXid in commit phase.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB16913DACB64E5721872AA5C02943BA@OS9PR01MB16913.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/OS9PR01MB16913F67856B0DA2A909788129400A@OS9PR01MB16913.jpnprd01.prod.outlook.com
This commit allows to log the raw parse tree in the same way we
currently log the parse tree, rewritten tree, and plan tree.
To avoid unnecessary log noise for users not interested in this
detail, a new GUC option, "debug_print_raw_parse", has been added.
When starting the PostgreSQL process with "-d N", and N is 3 or higher,
debug_print_raw_parse is enabled automatically, alongside
debug_print_parse.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2mcO0Gpo4vd8kPMAFWeJLSp0MeUUnaLdE1x0tSVd-VzUw%40mail.gmail.com
This set of changes removes the list of available buffers and instead simply
uses the clock-sweep algorithm to find and return an available buffer. This
also removes the have_free_buffer() function and simply caps the
pg_autoprewarm process to at most NBuffers.
While on the surface this appears to be removing an optimization it is in fact
eliminating code that induces overhead in the form of synchronization that is
problematic for multi-core systems.
The main reason for removing the freelist, however, is not the moderate
improvement in scalability, but that having the freelist would require
dedicated complexity in several upcoming patches. As we have not been able to
find a case benefiting from the freelist...
Author: Greg Burd <greg@burd.me>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/70C6A5B5-2A20-4D0B-BC73-EB09DD62D61C@getmailspring.com
When executing a MERGE UPDATE action, if there is more than one
concurrent update of the target row, the lock-and-retry code would
sometimes incorrectly identify the latest version of the target tuple,
leading to incorrect results.
This was caused by using the ctid field from the TM_FailureData
returned by table_tuple_lock() in a case where the result was TM_Ok,
which is unsafe because the TM_FailureData struct is not guaranteed to
be fully populated in that case. Instead, it should use the tupleid
passed to (and updated by) table_tuple_lock().
To reduce the chances of similar errors in the future, improve the
commentary for table_tuple_lock() and TM_FailureData to make it
clearer that table_tuple_lock() updates the tid passed to it, and most
fields of TM_FailureData should not be relied on in non-failure cases.
An exception to this is the "traversed" field, which is set in both
success and failure cases.
Reported-by: Dmitry <dsy.075@yandex.ru>
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1570d30e-2b95-4239-b9c3-f7bf2f2f8556@yandex.ru
Backpatch-through: 15
This commit changes some functions related to the data type numeric to
use the soft error reporting rather than a custom boolean flag (called
"have_error") that callers of these functions could rely on to bypass
the generation of ERROR reports, letting the callers do their own error
handling (timestamp, jsonpath and numeric_to_char() require them).
This results in the removal of some boilerplate code that was required
to handle both the ereport() and the "have_error" code paths bypassing
ereport(), unifying everything under the soft error reporting facility.
While on it, some duplicated error messages are removed. The function
upgraded in this commit were suffixed with "_opt_error" in their names.
They are renamed to "_safe" instead.
This change relies on d9f7f5d32f, that has introduced the soft error
reporting infrastructure.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96No5h5tRuR+KhcC44YcYUCw8WAHuLoqqyyop8_k3+JDQ@mail.gmail.com
pg_lsn includes pg_lsn_in_internal() for the purpose of parsing a LSN
position for the GUC recovery_target_lsn (21f428ebde). It relies on a
boolean called "have_error" that would be set when the LSN parsing
fails, then let its callers handle any errors.
d9f7f5d32f has added support for soft error reporting. This commit
removes some boilerplate code and switches the routine to use soft error
reporting directly, giving to the callers of pg_lsn_in_internal()
the possibility to be fed the error message generated on failure.
pg_lsn_in_internal() routine is renamed to pg_lsn_in_safe(), for
consistency with other similar routines that are given an escontext.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96No5h5tRuR+KhcC44YcYUCw8WAHuLoqqyyop8_k3+JDQ@mail.gmail.com
If an INSERT has an ON CONFLICT DO UPDATE clause, the executor must
check that the target relation supports UPDATE as well as INSERT. In
particular, it must check that the target relation has a REPLICA
IDENTITY if it publishes updates. Formerly, it was not doing this
check, which could lead to silently breaking replication.
Fix by adding such a check to CheckValidResultRel(), which requires
adding a new onConflictAction argument. In back-branches, preserve ABI
compatibility by introducing a wrapper function with the original
signature.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 13
There are two ways for shared libraries to allocate their own
LWLock tranches. One way is to call RequestNamedLWLockTranche() in
a shmem_request_hook, which requires the library to be loaded via
shared_preload_libraries. The other way is to call
LWLockNewTrancheId(), which is not subject to the same
restrictions. However, LWLockNewTrancheId() does require each
backend to store the tranche's name in backend-local memory via
LWLockRegisterTranche(). This API is a little cumbersome and leads
to things like unhelpful pg_stat_activity.wait_event values in
backends that haven't loaded the library.
This commit moves these LWLock tranche names to shared memory, thus
eliminating the need for each backend to call
LWLockRegisterTranche(). Instead, the tranche name must be
provided to LWLockNewTrancheId(), which immediately makes the name
available to all backends. Since the tranche name array is
append-only, lookups can ordinarily avoid locking as long as their
local copy of the LWLock counter is greater than the requested
tranche ID.
One downside of this approach is that we now have a hard limit on
both the length of tranche names (NAMEDATALEN-1 bytes) and the
number of dynamically-allocated tranches (256). Besides a limit of
NAMEDATALEN-1 bytes for tranche names registered via
RequestNamedLWLockTranche(), no such limits previously existed. We
could avoid these new limits by using dynamic shared memory, but
the complexity involved didn't seem worth it. We briefly
considered making the tranche limit user-configurable but
ultimately decided against that, too. Since there is still a lot
of time left in the v19 development cycle, it's possible we will
revisit this choice.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAA5RZ0vvED3naph8My8Szv6DL4AxOVK3eTPS0qXsaKi%3DbVdW2A%40mail.gmail.com
Store the information in guc_tables.c in a .dat file similar to the
catalog data in src/include/catalog/, and generate a part of
guc_tables.c from that. The goal is to make it easier to edit that
information, and to be able to make changes to the downstream data
structures more easily. (Essentially, those are the same reasons as
for the original adoption of the .dat format.)
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: David E. Wheeler <david@justatheory.com>
Discussion: https://www.postgresql.org/message-id/flat/dae6fe89-1e0c-4c3f-8d92-19d23374fb10%40eisentraut.org
SLRU bank locks are referred as "bank locks" or "SLRU bank locks" in the
code comments. The comments updated in this commit use the latter term.
Oversight in 53c2a97a92, that has replaced the single ControlLock by
the bank control locks.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://postgr.es/m/aLUT2UO8RjJOzZNq@jrouhaud
Backpatch-through: 17
Note that this doesn't require bumping SLOT_VERSION because we
require sizeof(bool) == 1, thanks to commit 97525bc5c8.
Overight in commit ddd5f4f54a.
Discussion: Ranier Vilela <ranier.vf@gmail.com>
This change replaces seven functions definitions by macros, reducing a
bit some repetitive patterns in the code. An interesting side effect is
that this removes an inconsistency in the naming of SLRU increment
functions with the field names.
This change is similar to 850f4b4c8c, 8018ffbf58 or 83a1a1b566.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aLHA//gr4dTpDHHC@ip-10-97-1-34.eu-west-3.compute.internal
This commit introduces a new subscription parameter,
max_retention_duration, aimed at mitigating excessive accumulation of dead
tuples when retain_dead_tuples is enabled and the apply worker lags behind
the publisher.
When the time spent advancing a non-removable transaction ID exceeds the
max_retention_duration threshold, the apply worker will stop retaining
conflict detection information. In such cases, the conflict slot's xmin
will be set to InvalidTransactionId, provided that all apply workers
associated with the subscription (with retain_dead_tuples enabled) confirm
the retention duration has been exceeded.
To ensure retention status persists across server restarts, a new column
subretentionactive has been added to the pg_subscription catalog. This
prevents unnecessary reactivation of retention logic after a restart.
The conflict detection slot will not be automatically re-initialized
unless a new subscription is created with retain_dead_tuples = true, or
the user manually re-enables retain_dead_tuples.
A future patch will introduce support for automatic slot re-initialization
once at least one apply worker confirms that the retention duration is
within the configured max_retention_duration.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
Using the LWLockCounter requires first calculating its address in
shared memory like this:
LWLockCounter = (int *) ((char *) MainLWLockArray - sizeof(int));
Commit 82e861fbe1 started this trend in order to fix EXEC_BACKEND
builds, but it could also be fixed by adding it to the
BackendParameters struct. The current approach is somewhat
difficult to follow, so this commit switches to the latter. While
at it, swap around the code in LWLockShmemSize() to match the order
of assignments in CreateLWLocks() for added readability.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aLDLnan9gNCS9fHx%40nathan
This has been done historically because of get_database_name (which
since commit cb98e6fb8f belongs in lsyscache.c/h, so let's move it
there) and get_database_oid (which is in the right place, but whose
declaration should appear in pg_database.h rather than dbcommands.h).
Clean this up.
Also, xlogreader.h and stringinfo.h are no longer needed by dbcommands.h
since commit f1fd515b39, so remove them.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202508191031.5ipojyuaswzt@alvherre.pgsql
During an investigation into rather odd aio related errors on macos, observed
by Alexander and Konstantin, we started to wonder if bitfield access is
related to the error. At the moment it looks like it is related, we cannot
reproduce the failures when replacing the bitfields. In addition, the problem
can only be reproduced with some compiler [versions] and not everyone has been
able to reproduce the issue.
The observed problem is that, very rarely, PgAioHandle->{state,target} are in
an inconsistent state, after having been checked to be in a valid state not
long before, triggering an assertion failure. Unfortunately, this could be
caused by wrong compiler code generation or somehow of missing memory barriers
- we don't really know. In theory there should not be any concurrent write
access to the handle in the state the bug is triggered, as the handle was idle
and is just being initialized.
Separately from the bug, we observed that at least gcc and clang generate
rather terrible code for the bitfield access. Even if it's not clear if the
observed assertion failure is actually caused by the bitfield somehow, the bad
code generation alone is sufficient reason to stop using bitfields.
Therefore, replace the enum bitfields with uint8s and instead cast in each
switch statement.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reported-by: Konstantin Knizhnik <knizhnik@garret.ru>
Discussion: https://postgr.es/m/1500090.1745443021@sss.pgh.pa.us
Backpatch-through: 18
This reverts commit bc22dc0e0d.
It appears that conditional variables are not suitable for use inside
critical sections. If WaitLatch()/WaitEventSetWaitBlock() face postmaster
death, they exit, releasing all locks instead of PANIC. In certain
situations, this leads to data corruption.
Reported-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/B3C69B86-7F82-4111-B97F-0005497BB745%40yandex-team.ru
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Backpatch-through: 18
Commit 1585ff7387 changed GetTransactionSnapshot() to throw an error
if it's called during logical decoding, instead of returning the
historic snapshot. I made that change for extra protection, because a
historic snapshot can only be used to access catalog tables while
GetTransactionSnapshot() is usually called when you're executing
arbitrary queries. You might get very subtle visibility problems if
you tried to use the historic snapshot for arbitrary queries.
There's no built-in code in PostgreSQL that calls
GetTransactionSnapshot() during logical decoding, but it turns out
that the pglogical extension does just that, to evaluate row filter
expressions. You would get weird results if the row filter runs
arbitrary queries, but it is sane as long as you don't access any
non-catalog tables. Even though there are no checks to enforce that in
pglogical, a typical row filter expression does not access any tables
and works fine. Accessing tables marked with the user_catalog_table =
true option is also OK.
To fix pglogical with row filters, and any other extensions that might
do similar things, revert GetTransactionSnapshot() to return a
historic snapshot during logical decoding.
To try to still catch the unsafe usage of historic snapshots, add
checks in heap_beginscan() and index_beginscan() to complain if you
try to use a historic snapshot to scan a non-catalog table. We're very
close to the version 18 release however, so add those new checks only
in master.
Backpatch-through: 18
Reported-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/20250809222338.cc.nmisch@google.com
This code was relying on "long", which is signed 8 bytes everywhere
except on Windows where it is 4 bytes, that could potentially expose it
to overflows, even if the current uses in the code are fine as far as I
know. This code is now able to rely on the same sizeof() variable
everywhere, with int64. long was used for sizes, partition counts and
entry counts.
Some callers of the dynahash.c routines used long declarations, that can
be cleaned up to use int64 instead. There was one shortcut based on
SIZEOF_LONG, that can be removed. long is entirely removed from
dynahash.c and hsearch.h.
Similar work was done in b1e5c9fa9a.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aKQYp-bKTRtRauZ6@paquier.xyz
This just includes a link to the bki documentation, to help people get
started.
Before commit 372728b0d4, there was a README at
src/backend/catalog/README, but then this was moved to the SGML
documentation. So this effectively puts back a link to what was
moved. But src/include/catalog/ is probably a better location,
because that's where all the interesting files are.
Co-authored-by: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+v5N400GJFJ9RyXAX7hFKbtF7vVQGvWdFWEfcSQmvVhi9xfrA@mail.gmail.com
This provides a single entry point to access some information about the
state of MultiXacts, able to return some data about multixacts offsets
and counts. Originally this function was only able to return some
information about the number of multixacts and multixact members,
extended here to provide some data about the oldest multixact ID in use
and the oldest offset, if known.
This change has been proposed in a patch that aims at providing more
monitoring capabilities for multixacts, and it is useful on its own.
GetMultiXactInfo() is added to multixact.h, becoming available for
out-of-core code.
Extracted from a larger patch by the same author.
Author: Naga Appani <nagnrik@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA+QeY+AAsYK6WvBW4qYzHz4bahHycDAY_q5ECmHkEV_eB9ckzg@mail.gmail.com
Now that the only call to relation_has_unique_index_for() that
supplied an exprlist and oprlist has been removed, the loop handling
those lists is effectively dead code. This patch removes that loop
and simplifies the function accordingly.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-EBnaRvEs7frTLbsXiweSTUXifsteF-d3rvv01FKO86w@mail.gmail.com
There are two implementation techniques for semijoins: one uses the
JOIN_SEMI jointype, where the executor emits at most one matching row
per left-hand side (LHS) row; the other unique-ifies the right-hand
side (RHS) and then performs a plain inner join.
The latter technique currently has some drawbacks related to the
unique-ification step.
* Only the cheapest-total path of the RHS is considered during
unique-ification. This may cause us to miss some optimization
opportunities; for example, a path with a better sort order might be
overlooked simply because it is not the cheapest in total cost. Such
a path could help avoid a sort at a higher level, potentially
resulting in a cheaper overall plan.
* We currently rely on heuristics to choose between hash-based and
sort-based unique-ification. A better approach would be to generate
paths for both methods and allow add_path() to decide which one is
preferable, consistent with how path selection is handled elsewhere in
the planner.
* In the sort-based implementation, we currently pay no attention to
the pathkeys of the input subpath or the resulting output. This can
result in redundant sort nodes being added to the final plan.
This patch improves semijoin planning by creating a new RelOptInfo for
the RHS rel to represent its unique-ified version. It then generates
multiple paths that represent elimination of distinct rows from the
RHS, considering both a hash-based implementation using the cheapest
total path of the original RHS rel, and sort-based implementations
that either exploit presorted input paths or explicitly sort the
cheapest total path. All resulting paths compete in add_path(), and
those deemed worthy of consideration are added to the new RelOptInfo.
Finally, the unique-ified rel is joined with the other side of the
semijoin using a plain inner join.
As a side effect, most of the code related to the JOIN_UNIQUE_OUTER
and JOIN_UNIQUE_INNER jointypes -- used to indicate that the LHS or
RHS path should be made unique -- has been removed. Besides, the
T_Unique path now has the same meaning for both semijoins and upper
DISTINCT clauses: it represents adjacent-duplicate removal on
presorted input. This patch unifies their handling by sharing the
same data structures and functions.
This patch also removes the UNIQUE_PATH_NOOP related code along the
way, as it is dead code -- if the RHS rel is provably unique, the
semijoin should have already been simplified to a plain inner join by
analyzejoins.c.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-EBnaRvEs7frTLbsXiweSTUXifsteF-d3rvv01FKO86w@mail.gmail.com
Previously this was being output to stderr. This commit adjusts things
to use elog(DEBUG4). Here we also adjust the format of the message to
add the hash table name and also put the message on a single line. This
should make grepping the logs for this information easier.
Also get rid of the global hash table statistics. This seems very dated
and didn't fit very well with trying to put all the statistics for a
specific hash table on a single log line.
The main aim here is to allow it so we can have at least one buildfarm
member build with HASH_STATISTICS to help prevent future changes from
breaking things in that area. ca3891251 recently fixed some issues
here.
In passing, switch to using uint64 data types rather than longs for the
usage counters. The long type is 32 bits on some platforms we support.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAApHDvoccvJ9CG5zx+i-EyCzJbcL5K=CzqrnL_YN59qaL5hiaw@mail.gmail.com
A patch is under discussion to add more SQL capabilities related to
multixacts, and this move avoids bloating the file more than necessary.
This affects pg_get_multixact_members(). A side effect of this move is
the requirement to add mxstatus_to_string() to multixact.h.
Extracted from a larger patch by the same author, tweaked by me.
Author: Naga Appani <nagnrik@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CA+QeY+AAsYK6WvBW4qYzHz4bahHycDAY_q5ECmHkEV_eB9ckzg@mail.gmail.com
Commit c5b7ba4e6 changed things so that the ri_RootResultRelInfo field
of this struct is set for both partitions and inheritance children and
used for tuple routing and transition capture (before that commit, it
was only set for partitions to route tuples into), but failed to update
these comments.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14NF5CcdCmTZpxrvpvBiT0y4EqKikW1r_wAu1CEHeOmUA%40mail.gmail.com
Backpatch-through: 14
Doing that seems rather random and unnecessary. This commit removes
those and fixes fallout, which is pretty minimal. We do need to add a
forward declaration of struct TM_IndexDeleteOp (whose full definition
appears in tableam.h) so that _bt_delitems_delete_check()'s declaration
can use it.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/202508051109.lzk3lcuzsaxo@alvherre.pgsql
Remove conditionally-compiled code for the other case.
Replace uses of FLOAT8PASSBYVAL with constant "true", mainly because
it was quite confusing in cases where the type we were dealing with
wasn't float8.
I left the associated pg_control and Pg_magic_struct fields in place.
Perhaps we should get rid of them, but it would save little, so it
doesn't seem worth thinking hard about the compatibility implications.
I just labeled them "vestigial" in places where that seemed helpful.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Remove conditionally-compiled code for smaller Datum widths,
and simplify comments that describe cases no longer of interest.
I also fixed up a few more places that were not using
DatumGetIntXX where they should, and made some cosmetic
adjustments such as using sizeof(int64) not sizeof(Datum)
in places where that fit better with the surrounding code.
One thing I remembered while preparing this part is that SP-GiST
stores pass-by-value prefix keys as Datums, so that the on-disk
representation depends on sizeof(Datum). That's even more
unfortunate than the existing commentary makes it out to be,
because now there is a hazard that the change of sizeof(Datum)
will break SP-GiST indexes on 32-bit machines. It appears that
there are no existing SP-GiST opclasses that are actually
affected; and if there are some that I didn't find, the number
of installations that are using them on 32-bit machines is
doubtless tiny. So I'm proceeding on the assumption that we
can get away with this, but it's something to worry about.
(gininsert.c looks like it has a similar problem, but it's okay
because the "tuples" it's constructing are just transient data
within the tuplesort step. That's pretty poorly documented
though, so I added some comments.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
This patch makes sizeof(Datum) be 8 on all platforms including
32-bit ones. The objective is to allow USE_FLOAT8_BYVAL to be true
everywhere, and in consequence to remove a lot of code that is
specific to pass-by-reference handling of float8, int8, etc. The
code for abbreviated sort keys can be simplified similarly. In this
way we can reduce the maintenance effort involved in supporting 32-bit
platforms, without going so far as to actually desupport them. Since
Datum is strictly an in-memory concept, this has no impact on on-disk
storage, though an initdb or pg_upgrade will be needed to fix affected
catalog entries.
We have required platforms to support [u]int64 for ages, so this
breaks no supported platform. We can expect that this change will
make 32-bit builds a bit slower and more memory-hungry, although being
able to use pass-by-value handling of 8-byte types may buy back some
of that. But we stopped optimizing for 32-bit cases a long time ago,
and this seems like just another step on that path.
This initial patch simply forces the correct type definition and
USE_FLOAT8_BYVAL setting, and cleans up a couple of minor compiler
complaints that ensued. This is sufficient for testing purposes.
In the wake of a bunch of Datum-conversion cleanups by Peter
Eisentraut, this now compiles cleanly with gcc on a 32-bit platform.
(I'd only tested the previous version with clang, which it turns out
is less picky than gcc about width-changing coercions.)
There is a good deal of now-dead code that I'll remove in separate
follow-up patches.
A catversion bump is required because this affects initial catalog
contents (on 32-bit machines) in two ways: pg_type.typbyval changes
for some built-in types, and Const nodes in stored views/rules will
now have 8 bytes not 4 for pass-by-value types.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Without using stamp files, meson lists the generated headers as the dependency
for every .c file, bloating build.ninja by more than 2x. Processing all the
dependencies also increases the time to generate build.ninja.
The immediate benefit is that this makes re-configuring and clean builds a bit
faster. The main motivation however is that I have other patches that
introduce additional build targets that further would increase the size of
build.ninja, making re-configuring more noticeably slower.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/cgkdgvzdpinkacf4v33mky7tbmk467oda5dd4dlmucjjockxzi@xkqfvjoq4uiy
Commit e2d4ef8de8 (the fix for CVE-2017-7484) added security checks
to the selectivity estimation functions to prevent them from running
user-supplied operators on data obtained from pg_statistic if the user
lacks privileges to select from the underlying table. In cases
involving inheritance/partitioning, those checks were originally
performed against the child RTE (which for plain inheritance might
actually refer to the parent table). Commit 553d2ec271 then extended
that to also check the parent RTE, allowing access if the user had
permissions on either the parent or the child. It turns out, however,
that doing any checks using the child RTE is incorrect, since
securityQuals is set to NULL when creating an RTE for an inheritance
child (whether it refers to the parent table or the child table), and
therefore such checks do not correctly account for any RLS policies or
security barrier views. Therefore, do the security checks using only
the parent RTE. This is consistent with how RLS policies are applied,
and the executor's ACL checks, both of which use only the parent
table's permissions/policies. Similar checks are performed in the
extended stats code, so update that in the same way, centralizing all
the checks in a new function.
In addition, note that these checks by themselves are insufficient to
ensure that the user has access to the table's data because, in a
query that goes via a view, they only check that the view owner has
permissions on the underlying table, not that the current user has
permissions on the view itself. In the selectivity estimation
functions, there is no easy way to navigate from underlying tables to
views, so add permissions checks for all views mentioned in the query
to the planner startup code. If the user lacks permissions on a view,
a permissions error will now be reported at planner-startup, and the
selectivity estimation functions will not be run.
Checking view permissions at planner-startup in this way is a little
ugly, since the same checks will be repeated at executor-startup.
Longer-term, it might be better to move all the permissions checks
from the executor to the planner so that permissions errors can be
reported sooner, instead of creating a plan that won't ever be run.
However, such a change seems too far-reaching to be back-patched.
Back-patch to all supported versions. In v13, there is the added
complication that UPDATEs and DELETEs on inherited target tables are
planned using inheritance_planner(), which plans each inheritance
child table separately, so that the selectivity estimation functions
do not know that they are dealing with a child table accessed via its
parent. Handle that by checking access permissions on the top parent
table at planner-startup, in the same way as we do for views. Any
securityQuals on the top parent table are moved down to the child
tables by inheritance_planner(), so they continue to be checked by the
selectivity estimation functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-8713
Fix a couple more places where an explicit Datum conversion
is needed (not clear how we missed these in ff89e182d and
previous commits).
Replace the minority usage "(Datum) NULL" with "(Datum) 0".
The former depends on the assumption that Datum is the same
width as Pointer, the latter doesn't. Anyway consistency
is a good thing.
This is, I believe, the last of the notational mop-up needed
before we can consider changing Datum to uint64 everywhere.
It's also important cleanup for more aggressive ideas such
as making Datum a struct.
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Discussion: https://postgr.es/m/8246d7ff-f4b7-4363-913e-827dadfeb145@eisentraut.org
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
This adds a few more functions to int128.h, allowing more of numeric.c
to use 128-bit integers on all platforms.
Specifically, int64_div_fast_to_numeric() and the following aggregate
functions can now use 128-bit integers for improved performance on all
platforms, rather than just platforms with native support for int128:
- SUM(int8)
- AVG(int8)
- STDDEV_POP(int2 or int4)
- STDDEV_SAMP(int2 or int4)
- VAR_POP(int2 or int4)
- VAR_SAMP(int2 or int4)
In addition to improved performance on platforms lacking native
128-bit integer support, this significantly simplifies this numeric
code by allowing a lot of conditionally compiled code to be deleted.
A couple of numeric functions (div_var_int64() and sqrt_var()) still
contain conditionally compiled 128-bit integer code that only works on
platforms with native 128-bit integer support. Making those work more
generally would require rolling our own higher precision 128-bit
division, which isn't supported for now.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWgBMc9ZwKMYqQpaQz2X6gaamYRB+RnMsUNcdMcL2Mj_w@mail.gmail.com
Recent ICU versions have added U_SHOW_CPLUSPLUS_HEADER_API, and we need
to set this to zero as well to hide the ICU C++ APIs from pg_locale.h
Per discussion, we want cpluspluscheck to work cleanly in backbranches,
so backpatch both this and its predecessor commit ed26c4e25a to all
supported versions.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1115793.1754414782%40sss.pgh.pa.us
Backpatch-through: 13
In the non-native code in int128_add_int64_mul_int64(), use signed
64-bit integer multiplication instead of unsigned multiplication for
the first three product terms. This simplifies the code needed to add
each product term to the result, leading to more compact and efficient
code. The actual performance gain is quite modest, but it seems worth
it to improve the code's readability.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWgBMc9ZwKMYqQpaQz2X6gaamYRB+RnMsUNcdMcL2Mj_w@mail.gmail.com
On platforms without native 128-bit integer support, simplify the test
for carry in int128_add_uint64() by noting that the low-part addition
is unsigned integer arithmetic, which is just modular arithmetic.
Therefore the test for carry can simply be written as "new value < old
value" (i.e., a test for modular wrap-around). This can then be made
branchless so that on modern compilers it produces the same machine
instructions as native 128-bit addition, making it significantly
simpler and faster.
Similarly, the test for carry in int128_add_int64() can be written in
much the same way, but with an extra term to compensate for the sign
of the value being added. Again, on modern compilers this leads to
branchless code, often identical to the native 128-bit integer
addition machine code.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWgBMc9ZwKMYqQpaQz2X6gaamYRB+RnMsUNcdMcL2Mj_w@mail.gmail.com
This commit makes use of the existing PqMsg_* macros in more places
and adds new PqReplMsg_* and PqBackupMsg_* macros for use in
special replication and backup messages, respectively.
Author: Dave Cramer <davecramer@gmail.com>
Co-authored-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/aIECfYfevCUpenBT@nathan
Discussion: https://postgr.es/m/CAFcNs%2Br73NOUb7%2BqKrV4HHEki02CS96Z%2Bx19WaFgE087BWwEng%40mail.gmail.com
The name "namspace" looks like a typo, but it was presumably meant
to avoid using the "namespace" C++ keyword. This commit renames
the parameter to "nameSpace" to prevent future confusion while
still avoiding the keyword.
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/aJJxpfsDfiQ1VbJ5%40nathan
This rearranges the code in src/include/common/int128.h, so that the
native and non-native implementations of each function are together
inside the function body (as they are in src/include/common/int.h),
rather than being in separate parts of the file.
This improves readability and maintainability, making it easier to
compare the native and non-native implementations, and avoiding the
need to duplicate every function comment and declaration.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWgBMc9ZwKMYqQpaQz2X6gaamYRB+RnMsUNcdMcL2Mj_w@mail.gmail.com
These were introduced (commit efdc7d7475) at the same time as we were
moving to using the standard inttypes.h format macros (commit
a0ed19e0a9). It doesn't seem useful to keep a new already-deprecated
interface like this with only a few users, so remove the new symbols
again and have the callers use PRIx64.
(Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all
use unsigned types.)
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org
This creates a new test module src/test/modules/test_int128 and moves
src/tools/testint128.c into it so that it can be built using the
normal build system, allowing the 128-bit integer arithmetic functions
in src/include/common/int128.h to be tested automatically. For now,
the tests are skipped on platforms that don't have native int128
support.
While at it, fix the test128 union in the test code: the "hl" member
of test128 was incorrectly defined to be a union instead of a struct,
which meant that the tests were only ever setting and checking half of
each 128-bit integer value.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWgBMc9ZwKMYqQpaQz2X6gaamYRB+RnMsUNcdMcL2Mj_w@mail.gmail.com
This commit introduces a new column backup_type that indicates the
type of backup being performed: either 'full' or 'incremental'.
Bump catalog version.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/CAOzEurQuzbHwTj1ehk1a+eeQDidJPyrE5s6mYumkjwjZnurhkQ@mail.gmail.com
We've only bothered converting the external interfaces, not the
endian-dependent internal macros (which should not be used by any
callers other than the interface functions in this header, anyway).
The VARTAG_1B_E() changes are required for C++ compatibility.
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/928ea48f-77c6-417b-897c-621ef16685a6@eisentraut.org
This enhancement builds upon the infrastructure introduced in commit
228c370868, which enables the preservation of deleted tuples and their
origin information on the subscriber. This capability is crucial for
handling concurrent transactions replicated from remote nodes.
The update introduces support for detecting update_deleted conflicts
during the application of update operations on the subscriber. When an
update operation fails to locate the target row-typically because it has
been concurrently deleted-we perform an additional table scan. This scan
uses the SnapshotAny mechanism and we do this additional scan only when
the retain_dead_tuples option is enabled for the relevant subscription.
The goal of this scan is to locate the most recently deleted tuple-matching
the old column values from the remote update-that has not yet been removed
by VACUUM and is still visible according to our slot (i.e., its deletion
is not older than conflict-detection-slot's xmin). If such a tuple is
found, the system reports an update_deleted conflict, including the origin
and transaction details responsible for the deletion.
This provides a groundwork for more robust and accurate conflict
resolution process, preventing unexpected behavior by correctly
identifying cases where a remote update clashes with a deletion from
another origin.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
These changes don't actually fix any leaks. They just make sure that
Valgrind will find pointers to data structures that remain allocated
at process exit, and thus not falsely complain about leaks. In
particular, we are trying to avoid situations where there is no
pointer to the beginning of an allocated block (except possibly
within the block itself, which Valgrind won't count).
* Because dynahash.c never frees hashtable storage except by deleting
the whole hashtable context, it doesn't bother to track the individual
blocks of elements allocated by element_alloc(). This results in
"possibly lost" complaints from Valgrind except when the first element
of each block is actively in use. (Otherwise it'll be on a freelist,
but very likely only reachable via "interior pointers" within element
blocks, which doesn't satisfy Valgrind.)
To fix, if we're building with USE_VALGRIND, expend an extra pointer's
worth of space in each element block so that we can chain them all
together from the HTAB header. Skip this in shared hashtables though:
Valgrind doesn't track those, and we'd need additional locking to make
it safe to manipulate a shared chain.
While here, update a comment obsoleted by 9c911ec06.
* Put the dlist_node fields of catctup and catclist structs first.
This ensures that the dlist pointers point to the starts of these
palloc blocks, and thus that Valgrind won't consider them
"possibly lost".
* The postmaster's PMChild structs and the autovac launcher's
avl_dbase structs also have the dlist_node-is-not-first problem,
but putting it first still wouldn't silence the warning because we
bulk-allocate those structs in an array, so that Valgrind sees a
single allocation. Commonly the first array element will be pointed
to only from some later element, so that the reference would be an
interior pointer even if it pointed to the array start. (This is the
same issue as for dynahash elements.) Since these are pretty simple
data structures, I don't feel too bad about faking out Valgrind by
just keeping a static pointer to the array start.
(This is all quite hacky, and it's not hard to imagine usages where
we'd need some other idea in order to have reasonable leak tracking of
structures that are only accessible via dlist_node lists. But these
changes seem to be enough to silence this class of leakage complaints
for the moment.)
* Free a couple of data structures manually near the end of an
autovacuum worker's run when USE_VALGRIND, and ensure that the final
vac_update_datfrozenxid() call is done in a non-permanent context.
This doesn't have any real effect on the process's total memory
consumption, since we're going to exit as soon as that last
transaction is done. But it does pacify Valgrind.
* Valgrind complains about the postmaster's socket-files and
lock-files lists being leaked, which we can silence by just
not nulling out the static pointers to them.
* Valgrind seems not to consider the global "environ" variable as
a valid root pointer; so when we allocate a new environment array,
it claims that data is leaked. To fix that, keep our own
statically-allocated copy of the pointer, similarly to the previous
item.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
When determining whether an allocated chunk is still reachable,
Valgrind will consider only pointers within what it believes to be
allocated chunks. Normally, all of a block obtained from malloc()
would be considered "allocated" --- but it turns out that if we use
VALGRIND_MEMPOOL_ALLOC to designate sub-section(s) of a malloc'ed
block as allocated, all the rest of that malloc'ed block is ignored.
This leads to lots of false positives of course. In particular,
in any multi-malloc-block context, all but the primary block were
reported as leaked. We also had a problem with context "ident"
strings, which were reported as leaked unless there was some other
pointer to them besides the one in the context header.
To fix, we need to use VALGRIND_MEMPOOL_ALLOC to designate
a context's management structs (the context struct itself and
any per-block headers) as allocated chunks. That forces moving
the VALGRIND_CREATE_MEMPOOL/VALGRIND_DESTROY_MEMPOOL calls into
the per-context-type code, so that the pool identifier can be
made as soon as we've allocated the initial block, but otherwise
it's fairly straightforward. Note that in Valgrind's eyes there
is no distinction between these allocations and the allocations
that the mmgr modules hand out to user code. That's fine for
now, but perhaps someday we'll want to do better yet.
When reading this patch, it's helpful to start with the comments
added at the head of mcxt.c.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210317181531.7oggpqevzz6bka3g@alap3.anarazel.de
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
Commit 719dcf3c42 introduced a field called CachedPlanType in
PlannedStmt to allow extensions to determine whether a cached plan is
generic or custom.
After discussion, the concepts that we want to track are a bit wider
than initially anticipated, as it is closer to knowing from which
"source" or "origin" a PlannedStmt has been generated or retrieved.
Custom and generic cached plans are a subset of that.
Based on the state of HEAD, we have been able to define two more
origins:
- "standard", for the case where PlannedStmt is generated in
standard_planner(), the most common case.
- "internal", for the fake PlannedStmt generated internally by some
query patterns.
This could be tuned in the future depending on what is needed. This
looks like a good starting point, at least. The default value is called
"UNKNOWN", provided as fallback value. This value is not used in the
core code, the idea is to let extensions building their own PlannedStmts
know about this new field.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aILaHupXbIGgF2wJ@paquier.xyz
There've been a few complaints that it can be overly difficult to figure
out why the planner picked a Memoize plan. To help address that, here we
adjust the EXPLAIN output to display the following additional details:
1) The estimated number of cache entries that can be stored at once
2) The estimated number of unique lookup keys that we expect to see
3) The number of lookups we expect
4) The estimated hit ratio
Technically #4 can be calculated using #1, #2 and #3, but it's not a
particularly obvious calculation, so we opt to display it explicitly.
The original patch by Lukas Fittl only displayed the hit ratio, but
there was a fear that might lead to more questions about how that was
calculated. The idea with displaying all 4 is to be transparent which
may allow queries to be tuned more easily. For example, if #2 isn't
correct then maybe extended statistics or a manual n_distinct estimate can
be used to help fix poor plan choices.
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Author: Lukas Fittl <lukas@fittl.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAP53Pky29GWAVVk3oBgKBDqhND0BRBN6yTPeguV_qSivFL5N_g%40mail.gmail.com
The callback added in fc415edf8c used to check if there is any pending
data to flush for fixed-numbered statistics, done by looping across all
the builtin and custom stats kinds with a call to have_fixed_pending_cb,
is proving to able to show in workloads that do not report any stats
(read-only, no function calls, no WAL, no IO, etc). The code used in
v17 was cheaper than that what HEAD has introduced, relying on three
boolean checks for WAL, SLRU and IO stats.
This commit switches the code to use a more efficient approach than
fc415edf8c, with a single boolean flag that can be switched to "true"
by any fixed-numbered stats kinds to force pgstat_report_stat() to go
through one round of reports. The flag is reset by pgstat_report_stat()
once a full round of reports is done. The flag being false means that
fixed-numbered stats kinds saw no activity, and that there is no pending
data to flush.
ac000fca74 took one step in improving the performance by reducing the
number of stats kinds that the backend can hold. This commit takes a
more drastic step by bringing back the code efficiency to what it was
before v18 with a cheap check at the beginning of pgstat_report_stat()
for its fast-exit path.
The callback have_static_pending_cb is removed as an effect of all that.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/eb224uegsga2hgq7dfq3ps5cduhpqej7ir2hjxzzozjthrekx5@dysei6buqthe
Backpatch-through: 18
Remove a bunch of PG_TRY constructs, de-volatilize related
variables, remove some PQclear calls in error paths.
Aside from making the code simpler and shorter, this should
provide some marginal performance gains.
For ease of review, I did not re-indent code within the removed
PG_TRY constructs. That'll be done in a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Commit 232d8caea fixed a case where postgres_fdw could lose track
of a PGresult object, resulting in a process-lifespan memory leak.
But I have little faith that there aren't other potential PGresult
leakages, now or in future, in the backend modules that use libpq.
Therefore, this patch proposes infrastructure that makes all
PGresults returned from libpq act as though they are palloc'd
in the CurrentMemoryContext (with the option to relocate them to
another context later). This should greatly reduce the risk of
careless leaks, and it also permits removal of a bunch of code
that attempted to prevent such leaks via PG_TRY blocks.
This patch adds infrastructure that wraps each PGresult in a
"libpqsrv_PGresult" that provides a memory context reset callback
to PQclear the PGresult. Code using this abstraction is inherently
memory-safe to the same extent as we are accustomed to in most backend
code. Furthermore, we add some macros that automatically redirect
calls of the libpq functions concerned with PGresults to use this
infrastructure, so that almost no source-code changes are needed to
wheel this infrastructure into place in all the backend code that
uses libpq.
Perhaps in future we could create similar infrastructure for
PGconn objects, but there seems less need for that.
This patch just creates the infrastructure and makes relevant code
use it, including reverting 232d8caea in favor of this mechanism.
A good deal of follow-on simplification is possible now that we don't
have to be so cautious about freeing PGresults, but I'll put that in
a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
This commit changes stats kinds to have the following bounds, making
their handling in core cheaper by default:
- PGSTAT_KIND_CUSTOM_MIN 128 -> 24
- PGSTAT_KIND_MAX 256 -> 32
The original numbers were rather high, and showed an impact on
performance in pgstat_report_stat() for the case of simple queries with
its early-exit path if there are no pending statistics to flush. This
logic will be improved more in a follow-up commit to bring the
performance of pgstat_report_stat() on par with v17 and older versions.
Lowering the bounds is a change worth doing on its own, independently of
the other improvement.
These new numbers should be enough to leave some room for the following
years for built-in and custom stats kinds, with stable ID numbers. At
least that should be enough to start with this facility for extension
developers. It can be always increased in the tree depending on the
requirements wanted.
Per discussion with Andres Freund and Bertrand Drouvot.
Discussion: https://postgr.es/m/eb224uegsga2hgq7dfq3ps5cduhpqej7ir2hjxzzozjthrekx5@dysei6buqthe
Backpatch-through: 18
PlannedStmt gains a new field, called CachedPlanType, able to track if a
given plan tree originates from the cache and if we are dealing with a
generic or custom cached plan.
This field can be used for monitoring or statistical purposes, in the
executor hooks, for example, based on the planned statement attached to
a QueryDesc. A patch is under discussion for pg_stat_statements to
provide an equivalent of the counters in pg_prepared_statements for
custom and generic plans, to provide a more global view of such data, as
this data is now restricted to the current session.
The concept introduced in this commit is useful on its own, and has been
extracted from a larger patch by the same author.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAA5RZ0uFw8Y9GCFvafhC=OA8NnMqVZyzXPfv_EePOt+iv1T-qQ@mail.gmail.com
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
lwlock.c, lwlock.h, and wait_event_names.txt each contain a list of
built-in LWLock tranches. It is easy to miss one or the other when
adding or removing tranches, and discrepancies have adverse effects
(e.g., breaking JOINs between pg_stat_activity and pg_wait_events).
This commit moves the lists of built-in tranches in lwlock.{c,h} to
lwlocklist.h and adds a cross-check to the script that generates
lwlocknames.h. If the lists do not match exactly, building will
fail.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aHpOgwuFQfcFMZ/B%40ip-10-97-1-34.eu-west-3.compute.internal
Commit 70e81861fa split out xlogrecovery.c/h and moved some enums
related to recovery targets to xlogrecovery.h. However, it seems that
the enum RecoveryTargetAction was inadvertently left out by that commit.
This commit moves it to xlogrecovery.h for consistency.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20240904.173013.1132986940678039655.horikyota.ntt@gmail.com
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commit 112faf1378 introduced a translation marker in libpq-be-fe-helpers.h,
but this caused build failures on some platforms—such as the one reported
by buildfarm member indri—due to linker issues with dblink. This is the same
problem previously addressed in commit 213c959a29.
To fix the issue, this commit removes the translation marker from
libpq-be-fe-helpers.h, following the approach used in 213c959a29.
It also removes the associated gettext_noop() calls added in commit
112faf1378, as they are no longer needed.
While reviewing this, a gettext_noop() call was also found in
contrib/basic_archive. Since contrib modules don't support translation,
this call has been removed as well.
Per buildfarm member indri.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0e6299d9-608a-4ffa-aeb1-40cb8a99000b@oss.nttdata.com
This index AM callback has been introduced in c1ec02be1d and it is
optional, currently only being used by BRIN. Optional callbacks are
documented with NULL as possible value in amapi.h and indexam.sgml, but
this callback has missed this part of the description.
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+PvgYcPmPDi1YdHMJY5upnyGRpc0N8pk1xNB11xDSBwNog@mail.gmail.com
Backpatch-through: 17
Previously, NOTICE, WARNING, and similar messages received from remote
servers over replication, postgres_fdw, or dblink connections were printed
directly to stderr on the local server (e.g., the subscriber). As a result,
these messages lacked log prefixes (e.g., timestamp), making them harder
to trace and correlate with other log entries.
This commit addresses the issue by introducing a custom notice receiver
for replication, postgres_fdw, and dblink connections. These messages
are now logged via ereport(), ensuring they appear in the logs with proper
formatting and context, which improves clarity and aids in debugging.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CALDaNm2xsHpWRtLm-VL_HJCsaE3+1Y_n-jDEAr3-suxVqc3xoQ@mail.gmail.com
In commit b262ad440, we introduced an optimization that reduces an IS
[NOT] NULL qual on a NOT NULL column to constant true or constant
false, provided we can prove that the input expression of the NullTest
is not nullable by any outer joins or grouping sets. This deduction
happens quite late in the planner, during the distribution of quals to
rels in query_planner. However, this approach has some drawbacks: we
can't perform any further folding with the constant, and it turns out
to be prone to bugs.
Ideally, this deduction should happen during constant folding.
However, the per-relation information about which columns are defined
as NOT NULL is not available at that point. This information is
currently collected from catalogs when building RelOptInfos for base
or "other" relations.
This patch moves the collection of NOT NULL attribute information for
relations before pull_up_sublinks, storing it in a hash table keyed by
relation OID. It then uses this information to perform the NullTest
deduction for Vars during constant folding. This also makes it
possible to leverage this information to pull up NOT IN subqueries.
Note that this patch does not get rid of restriction_is_always_true
and restriction_is_always_false. Removing them would prevent us from
reducing some IS [NOT] NULL quals that we were previously able to
reduce, because (a) the self-join elimination may introduce new IS NOT
NULL quals after constant folding, and (b) if some outer joins are
converted to inner joins, previously irreducible NullTest quals may
become reducible.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4-bFJ1At4btk5wqbezdu8PLtQ3zv-aiaY3ry9Ymm=jgFQ@mail.gmail.com
There are several pieces of catalog information that need to be
retrieved for a relation during the early stage of planning. These
include relhassubclass, which is used to clear the inh flag if the
relation has no children, as well as a column's attgenerated and
default value, which are needed to expand virtual generated columns.
More such information may be required in the future.
Currently, these pieces of catalog data are collected in multiple
places, resulting in repeated table_open/table_close calls for each
relation in the rangetable. This patch centralizes the collection of
all required early-stage catalog information into a single loop over
the rangetable, allowing each relation to be opened and closed only
once.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4-bFJ1At4btk5wqbezdu8PLtQ3zv-aiaY3ry9Ymm=jgFQ@mail.gmail.com
Currently, we expand virtual generated columns after we have pulled up
any SubLinks within the query's quals. This ensures that the virtual
generated column references within SubLinks that should be transformed
into joins are correctly expanded. This approach works well and has
posed no issues.
In an upcoming patch, we plan to centralize the collection of catalog
information needed early in the planner. This will help avoid
repeated table_open/table_close calls for relations in the rangetable.
Since this information is required during sublink pull-up, we are
moving the expansion of virtual generated columns to occur beforehand.
To achieve this, if any EXISTS SubLinks can be pulled up, their
rangetables are processed just before pulling them up.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4-bFJ1At4btk5wqbezdu8PLtQ3zv-aiaY3ry9Ymm=jgFQ@mail.gmail.com
If a MERGE inside a CTE attempts an UPDATE or DELETE on a table with
BEFORE ROW triggers, and a concurrent UPDATE or DELETE happens, the
merge code would fail (crashing in the case of an UPDATE action, and
potentially executing the wrong action for a DELETE action).
This is the same issue that 9321c79c86 attempted to fix, except now
for a MERGE inside a CTE. As noted in 9321c79c86, what needs to happen
is for the trigger code to exit early, returning the TM_Result and
TM_FailureData information to the merge code, if a concurrent
modification is detected, rather than attempting to do an EPQ
recheck. The merge code will then do its own rechecking, and rescan
the action list, potentially executing a different action in light of
the concurrent update. In particular, the trigger code must never call
ExecGetUpdateNewTuple() for MERGE, since that is bound to fail because
MERGE has its own per-action projection information.
Commit 9321c79c86 did this using estate->es_plannedstmt->commandType
in the trigger code to detect that a MERGE was being executed, which
is fine for a plain MERGE command, but does not work for a MERGE
inside a CTE. Fix by passing that information to the trigger code as
an additional parameter passed to ExecBRUpdateTriggers() and
ExecBRDeleteTriggers().
Back-patch as far as v17 only, since MERGE cannot appear inside a CTE
prior to that. Additionally, take care to preserve the trigger ABI in
v17 (though not in v18, which is still in beta).
Bug: #18986
Reported-by: Yaroslav Syrytsia <me@ys.lc>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18986-e7a8aac3d339fa47@postgresql.org
Backpatch-through: 17
This commit adds the boilerplate code for supporting a list of
options in CHECKPOINT commands. No actual options are supported
yet, but follow-up commits will add support for MODE and
FLUSH_UNLOGGED. While at it, this commit refactors the code for
executing CHECKPOINT commands to its own function since it's about
to become significantly larger.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately reflects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "fast" instead of "immediate", too. Likewise, references to
"immediate" checkpoints in the documentation have been updated to
say "fast". This is preparatory work for a follow-up commit that
will add a MODE option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately relects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "flush-unlogged" instead of "flush-all", too. This is
preparatory work for a follow-up commit that will add a
FLUSH_UNLOGGED option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
Previously, the check_hook functions for max_slot_wal_keep_size and
idle_replication_slot_timeout would incorrectly raise an ERROR for values
set in postgresql.conf during upgrade, even though those values were not
actively used in the upgrade process.
To prevent logical slot invalidation during upgrade, we used to set
special values for these GUCs. Now, instead of relying on those values, we
directly prevent WAL removal and logical slot invalidation caused by
max_slot_wal_keep_size and idle_replication_slot_timeout.
Note: PostgreSQL 17 does not include the idle_replication_slot_timeout
GUC, so related changes were not backported.
BUG #18979
Reported-by: jorsol <jorsol@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed by: vignesh C <vignesh21@gmail.com>
Reviewed by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/219561.1751826409@sss.pgh.pa.us
Discussion: https://postgr.es/m/18979-a1b7fdbb7cd181c6@postgresql.org
Previously, the idle_replication_slot_timeout parameter used minutes
as its unit, based on the assumption that values would typically exceed
one minute in production environments. However, this caused unexpected
behavior: specifying a value below 30 seconds would round down to 0,
effectively disabling the timeout. This could be surprising to users.
To allow finer-grained control and avoid such confusion, this commit changes
the unit of idle_replication_slot_timeout to seconds. Larger values can
still be specified easily using standard time suffixes, for example,
'24h' for 24 hours.
Back-patch to v18 where idle_replication_slot_timeout was added.
Reported-by: Gunnar Morling <gunnar.morling@googlemail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
This commit adds a new system view that provides information about
entries in the dynamic shared memory (DSM) registry. Specifically,
it returns the name, type, and size of each entry. Note that since
we cannot discover the size of dynamic shared memory areas (DSAs)
and hash tables backed by DSAs (dshashes) without first attaching
to them, the size column is left as NULL for those.
Bumps catversion.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Sungwoo Chang <swchangdev@gmail.com>
Discussion: https://postgr.es/m/4D445D3E-81C5-4135-95BB-D414204A0AB4%40gmail.com
By default io_uring creates a shared memory mapping for each io_uring
instance, leading to a large number of memory mappings. Unfortunately a large
number of memory mappings slows things down, backend exit is particularly
affected. To address that, newer kernels (6.5) support using user-provided
memory for the memory. By putting the relevant memory into shared memory we
don't need any additional mappings.
On a system with a new enough kernel and liburing, there is no discernible
overhead when doing a pgbench -S -C anymore.
Reported-by: MARK CALLAGHAN <mdcallag@gmail.com>
Reviewed-by: "Burd, Greg" <greg@burd.me>
Reviewed-by: Jim Nasby <jnasby@upgrade.com>
Discussion: https://postgr.es/m/CAFbpF8OA44_UG+RYJcWH9WjF7E3GA6gka3gvH6nsrSnEe9H0NA@mail.gmail.com
Backpatch-through: 18
For an ordered Append or MergeAppend, we need to inject an explicit
sort into any subpath that is not already well enough ordered.
Currently, only explicit full sorts are considered; incremental sorts
are not yet taken into account.
In this patch, for subpaths of an ordered Append or MergeAppend, we
choose to use explicit incremental sort if it is enabled and there are
presorted keys.
The rationale is based on the assumption that incremental sort is
always faster than full sort when there are presorted keys, a premise
that has been applied in various parts of the code. In addition, the
current cost model tends to favor incremental sort as being cheaper
than full sort in the presence of presorted keys, making it reasonable
not to consider full sort in such cases.
No backpatch as this could result in plan changes.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4_V7a2enTR+T3pOY_YZ-FU8ZsFYym2swOz4jNMqmSgyuw@mail.gmail.com
Functions to bootstrap and zero pages in various SLRU callers were
fairly duplicative. We can slash almost two hundred lines with a couple
of simple helpers:
- SimpleLruZeroAndWritePage: Does the equivalent of SimpleLruZeroPage
followed by flushing the page to disk
- XLogSimpleInsertInt64: Does a XLogBeginInsert followed by XLogInsert
of a trivial record whose data is just an int64.
Author: Evgeny Voropaev <evgeny.voropaev@tantorlabs.com>
Reviewed by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/97820ce8-a1cd-407f-a02b-47368fadb14b%40tantorlabs.com
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
This refactoring is a follow-up of the work done in 5a1dfde833, that
has switched 2PC file names to use FullTransactionIds when written on
disk. This will help with the integration of a follow-up solution
related to the handling of two-phase files during recovery, to address
older defects while reading these from disk after a crash.
This change is useful in itself as it reduces the need to build the
file names from epoch numbers and TransactionIds, because we can use
directly FullTransactionIds from which the 2PC file names are guessed.
So this avoids a lot of back-and-forth between the FullTransactionIds
retrieved from the file names and how these are passed around in the
internal 2PC logic.
Note that the core of the change is the use of a FullTransactionId
instead of a TransactionId in GlobalTransactionData, that tracks 2PC
file information in shared memory. The change in TwoPhaseCallback makes
this commit unfit for stable branches.
Noah has contributed a good chunk of this patch. I have spent some time
on it as well while working on the issues with two-phase state files and
recovery.
Author: Noah Misch <noah@leadboat.com>
Co-Authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z5sd5O9JO7NYNK-C@paquier.xyz
Discussion: https://postgr.es/m/20250116205254.65.nmisch@google.com
Previously, truncating a temporary relation required scanning the entire
local buffer pool once per relation fork to invalidate buffers. This could
be slow, especially with a large local buffers, as the scan was repeated
multiple times.
A similar issue with regular tables (shared buffers) was addressed in
commit 6d05086c0a by scanning the buffer pool only once for all forks.
This commit applies the same optimization to temporary relations,
improving truncation performance.
Author: Daniil Davydov <3danissimo@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Discussion: https://postgr.es/m/CAJDiXggNqsJOH7C5co4jA8nDk8vw-=sokyh5s1_TENWnC6Ofcg@mail.gmail.com
Previous commits invented timestamp2timestamptz_opt_overflow,
date2timestamp_opt_overflow, and date2timestamptz_opt_overflow
functions to perform non-error-throwing conversions between
datetime types. This patch completes the set by adding
timestamp2date_opt_overflow, timestamptz2date_opt_overflow,
and timestamptz2timestamp_opt_overflow.
In addition, adjust timestamp2timestamptz_opt_overflow so that it
doesn't throw error if timestamp2tm fails, but treats that as an
overflow case. The situation probably can't arise except with an
invalid timestamp value, and I can't think of a way that that would
happen except data corruption. However, it's pretty silly to have a
function whose entire reason for existence is to not throw errors for
out-of-range inputs nonetheless throw an error for out-of-range input.
The new APIs are not used in this patch, but will be needed in
upcoming btree_gin changes.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://postgr.es/m/262624.1738460652@sss.pgh.pa.us
Commit 08aa89b326 removed the COMMIT_TS_SETTS WAL record,
leaving xl_commit_ts_set and SizeOfCommitTsSet unused. However,
it missed removing these definitions. This commit cleans up
the leftover code.
Since this is a cleanup rather than a bug fix, it is applied only to
the master branch.
Author: Andy Fan <zhihuifan1213@163.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/87ecuzmkqf.fsf@163.com
AlterDomainStmt.subtype used characters for its subtypes of commands,
SET|DROP DEFAULT|NOT NULL and ADD|DROP|VALIDATE CONSTRAINT, which were
hardcoded in a couple of places of the code. The code is improved by
using an enum instead, with the same character values as the original
code.
Note that the field was documented in parsenodes.h and that it forgot to
mention 'V' (VALIDATE CONSTRAINT).
Author: Quan Zongliang <quanzongliang@yeah.net>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/41ff310b-16bd-44b9-a3ef-97e20f14b709@yeah.net
The COPY FROM command now accepts a non-negative integer for the HEADER option,
allowing multiple header lines to be skipped. This is useful when the input
contains multi-line headers that should be ignored during data import.
Author: Shinya Kato <shinya11.kato@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/CAOzEurRPxfzbxqeOPF_AGnAUOYf=Wk0we+1LQomPNUNtyZGBZw@mail.gmail.com
This routine has come as a useful piece to be able to know the list of
injection points currently attached in a system. One area would be to
use it in a set-returning function, or just let out-of-core code play
with it.
This hides the internals of the shared memory array lookup holding the
information about the injection points (point name, library and function
name), allocating the result in a palloc'd List consumable by the
caller.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Discussion: https://postgr.es/m/Z_xYkA21KyLEHvWR@paquier.xyz
Discussion: https://postgr.es/m/aBG2rPwl3GE7m1-Q@paquier.xyz
Presently, the dynamic shared memory (DSM) registry only provides
GetNamedDSMSegment(), which allocates a fixed-size segment. To use
the DSM registry for more sophisticated things like dynamic shared
memory areas (DSAs) or a hash table backed by a DSA (dshash), users
need to create a DSM segment that stores various handles and LWLock
tranche IDs and to write fairly complicated initialization code.
Furthermore, there is likely little variation in this
initialization code between libraries.
This commit introduces functions that simplify allocating a DSA or
dshash within the DSM registry. These functions are very similar
to GetNamedDSMSegment(). Notable differences include the lack of
an initialization callback parameter and the prohibition of calling
the functions more than once for a given entry in each backend
(which should be trivially avoidable in most circumstances). While
at it, this commit bumps the maximum DSM registry entry name length
from 63 bytes to 127 bytes.
Also note that even though one could presumably detach/destroy the
DSAs and dshashes created in the registry, such use-cases are not
yet well-supported, if for no other reason than the associated DSM
registry entries cannot be removed. Adding such support is left as
a future exercise.
The test_dsm_registry test module contains tests for the new
functions and also serves as a complete usage example.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Discussion: https://postgr.es/m/aEC8HGy2tRQjZg_8%40nathan
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Prior to this patch, every FETCH call would generate a unique queryId
with a different size specified. Depending on the workloads, this could
lead to a significant bloat in pg_stat_statements, as repeatedly calling
a specific cursor would result in a new queryId each time. For example,
FETCH 1 c1; and FETCH 2 c1; would produce different queryIds.
This patch improves the situation by normalizing the fetch size, so as
semantically similar statements generate the same queryId. As a result,
statements like the below, which differ syntactically but have the same
effect, will now share a single queryId:
FETCH FROM c1
FETCH NEXT c1
FETCH 1 c1
In order to do a normalization based on the keyword used in FETCH,
FetchStmt is tweaked with a new FetchDirectionKeywords. This matters
for "howMany", which could be set to a negative value depending on the
direction, and we want to normalize the queries with enough information
about the direction keywords provided, including RELATIVE, ABSOLUTE or
all the ALL variants.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tA6LbHCg2qSS+KuM850BZC_+ZgHV7Ug6BXw22TNyF+MA@mail.gmail.com
We stopped defining IOV_MAX on non-Windows systems in 75357ab94, on
the assumption that every non-Windows system defines it in <limits.h>
as required by X/Open. GNU Hurd, however, doesn't follow that
standard either. Put back the old logic to assume 16 if it's
not defined.
Author: Michael Banck <mbanck@gmx.net>
Co-authored-by: Christoph Berg <myon@debian.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6862e8d1.050a0220.194b8d.76fa@mx.google.com
Discussion: https://postgr.es/m/6846e0c3.df0a0220.39ef9b.c60e@mx.google.com
Backpatch-through: 16
Previously, pattern matching and case mapping behavior branched based
on the provider. Refactor to use a method table, which is less
error-prone.
This is also a step toward multiple provider versions, which we may
want to support in the future.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/2830211e1b6e6a2e26d845780b03e125281ea17b.camel%40j-davis.com
When querying NUMA status of pages in shared memory, we need to touch
the memory first to get valid results. This may trigger valgrind
reports, because some of the memory (e.g. unpinned buffers) may be
marked as noaccess.
Solved by adding a valgrind suppresion. An alternative would be to
adjust the access/noaccess status before touching the memory, but that
seems far too invasive. It would require all those places to have
detailed knowledge of what the shared memory stores.
The pg_numa_touch_mem_if_required() macro is replaced with a function.
Macros are invisible to suppressions, so it'd have to suppress reports
for the caller - e.g. pg_get_shmem_allocations_numa(). So we'd suppress
reports for the whole function, and that seems to heavy-handed. It might
easily hide other valid issues.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Backpatch-through: 18
Switch MSVC to use the conforming preprocessor, using the
/Zc:preprocessor option.
This allows us to drop the alternative implementation of
VA_ARGS_NARGS() for the previous "traditional" preprocessor.
This also prepares the way for enabling C11 mode in the future, which
enables the conforming preprocessor by default.
This now requires Visual Studio 2019. The installation documentation
is adjusted accordingly.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a%40eisentraut.org
This provides a convenient way to look up a database's OID. For
example, the query
SELECT * FROM pg_shdepend
WHERE dbid = (SELECT oid FROM pg_database
WHERE datname = current_database());
can now be simplified to
SELECT * FROM pg_shdepend
WHERE dbid = current_database()::regdatabase;
Like the regrole type, regdatabase has cluster-wide scope, so we
disallow regdatabase constants from appearing in stored
expressions.
Bumps catversion.
Author: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan
This commit refactors the vacuum routines that rely on VacuumParams,
adding const markers where necessary to force a new policy in the code.
This structure should not use a pointer as it may be used across
multiple relations, and its contents should never be updated.
vacuum_rel() stands as an exception as it touches the "index_cleanup"
and "truncate" options.
VacuumParams has been introduced in 0d83138974, and 661643deda has
fixed a bug impacting VACUUM operating on multiple relations. The
changes done in tableam.h break ABI compatibility, so this commit can
only happen on HEAD.
Author: Shihao Zhong <zhong950419@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CAGRkXqTo+aK=GTy5pSc-9cy8H2F2TJvcrZ-zXEiNJj93np1UUw@mail.gmail.com
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6300
This should have been done prior to beta1, but it was forgotten. This
will ensure we get the correct numbering for beta2 onward.
This is required before the creation of a new branch. pgindent is
clean, as well as is reformat-dat-files.
perltidy version is v20230309, as documented in pgindent's README.
In the wake of commit a16ef313f, we need to deal with more cases
involving PlaceHolderVars in NestLoopParams than we did before.
For one thing, a16ef313f was incorrect to suppose that we could
rely on the required-outer relids of the lefthand path to decide
placement of nestloop-parameter PHVs. As Richard Guo argued at
the time, we must look at the required-outer relids of the join
path itself.
For another, we have to apply replace_nestloop_params() to such
a PHV's expression, in case it contains references to values that
will be supplied from NestLoopParams of higher-level nestloops.
For another, we need to be more careful about the phnullingrels
of the PHV than we were being. identify_current_nestloop_params
only bothered to ensure that the phnullingrels didn't contain
"too many" relids, but now it has to be exact, because setrefs.c
will apply both NRM_SUBSET and NRM_SUPERSET checks in different
places. We can compute the correct relids by determining the
set of outer joins that should be able to null the PHV and then
subtracting whatever's been applied at or below this join.
Do the same for plain Vars, too. (This should make it possible
to use NRM_EQUAL to process nestloop params in setrefs.c, but
I won't risk making such a change in v18 now.)
Lastly, if a nestloop parameter PHV was pulled up out of a subquery
and it contains a subquery that was originally pushed down from this
query level, then that will still be represented as a SubLink, because
SS_process_sublinks won't recurse into outer PHVs, so it didn't get
transformed during expression preprocessing in the subquery. We can
substitute the version of the PHV's expression appearing in its
PlaceHolderInfo to ensure that that preprocessing has happened.
(Seems like this processing sequence could stand to be redesigned,
but again, late in v18 development is not the time for that.)
It's not very clear to me why the old have_dangerous_phv join-order
restriction prevented us from seeing the last three of these problems.
But given the lack of field complaints, it must have done so.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18953-1c9883a9d4afeb30@postgresql.org
Just like selecting from a view is exploitable (CVE-2024-7348),
selecting from a table with virtual generated columns is exploitable.
Users who are concerned about this can avoid selecting from views, but
telling them to avoid selecting from tables is less practical.
To address this, this changes it so that generation expressions for
virtual generated columns are restricted to using built-in functions
and types, and the columns are restricted to having a built-in type.
We assume that built-in functions and types cannot be exploited for
this purpose.
In the future, this could be expanded by some new mechanism to declare
other functions and types as safe or trusted for this purpose, but
that is to be designed.
(An alternative approach might have been to expand the
restrict_nonsystem_relation_kind GUC to handle this, like the fix for
CVE-2024-7348. But that is kind of an ugly approach. That fix had to
fit in the constraints of fixing an ancient vulnerability in all
branches. Since virtual generated columns are new, we're free from
the constraints of the past, and we can and should use cleaner
options.)
Reported-by: Feike Steenbergen <feikesteenbergen@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAK_s-G2Q7de8Q0qOYUR%3D_CTB5FzzVBm5iZjOp%2BmeVWpMpmfO0w%40mail.gmail.com
Commit 62d712ecfd made query jumbling squash lists of Consts as a
single element, but there's no reason not to treat PARAM_EXTERN
parameters the same. For these purposes, these values are indeed
constants for any particular execution of a query.
In particular, this should make list squashing more useful for
applications using extended query protocol, which would use parameters
extensively.
A complication arises: if a query has both external parameters and
squashable lists, then the parameter number used as placeholder for the
squashed list might be inconsistent with regards to the parameter
numbers used by the query literal. To reduce the surprise factor, all
parameters are renumbered starting from 1 in that case.
Author: Sami Imseih <samimseih@gmail.com>
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAA5RZ0tRXoPG2y6bMgBCWNDt0Tn=unRerbzYM=oW0syi1=C1OA@mail.gmail.com
