Replace the use of Constraint with a new ATAlterConstraint struct, which
allows us to pass additional information. No functionality is added by
this commit. This is necessary for future work that allows altering
constraints in other ways.
I (Álvaro) took the liberty of restructuring the code for ALTER
CONSTRAINT beyond what Amul did. The original coding before Amul's
patch was unnecessarily baroque, and this change makes things simpler
by removing one level of subroutine. Also, partly remove the assumption
that only partitioned tables are relevant (by passing sensible 'recurse'
arguments) and no longer ignore whether ONLY was specified. I say
'partly' because the current coding only walks down via the 'conparentid'
relationship, which is only used for partitioned tables; but future
patches could handle ONLY or not for other types of constraint changes
for legacy inheritance trees too.
Author: Amul Sul <sulamul@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94bfgPV-8Mw_HwSBeheVwaK9=5s+7+KbBj_NpwXQFgDGg@mail.gmail.com
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This allows the RETURNING list of INSERT/UPDATE/DELETE/MERGE queries
to explicitly return old and new values by using the special aliases
"old" and "new", which are automatically added to the query (if not
already defined) while parsing its RETURNING list, allowing things
like:
RETURNING old.colname, new.colname, ...
RETURNING old.*, new.*
Additionally, a new syntax is supported, allowing the names "old" and
"new" to be changed to user-supplied alias names, e.g.:
RETURNING WITH (OLD AS o, NEW AS n) o.colname, n.colname, ...
This is useful when the names "old" and "new" are already defined,
such as inside trigger functions, allowing backwards compatibility to
be maintained -- the interpretation of any existing queries that
happen to already refer to relations called "old" or "new", or use
those as aliases for other relations, is not changed.
For an INSERT, old values will generally be NULL, and for a DELETE,
new values will generally be NULL, but that may change for an INSERT
with an ON CONFLICT ... DO UPDATE clause, or if a query rewrite rule
changes the command type. Therefore, we put no restrictions on the use
of old and new in any DML queries.
Dean Rasheed, reviewed by Jian He and Jeff Davis.
Discussion: https://postgr.es/m/CAEZATCWx0J0-v=Qjc6gXzR=KtsdvAE7Ow=D=mu50AgOe+pvisQ@mail.gmail.com
This adds support for the NOT ENFORCED/ENFORCED flag for constraints,
with support for check constraints.
The plan is to eventually support this for foreign key constraints,
where it is typically more useful.
Note that CHECK constraints do not currently support ALTER operations,
so changing the enforceability of an existing constraint isn't
possible without dropping and recreating it. This could be added
later.
Author: Amul Sul <amul.sul@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
Trying to clean up the code a bit while we're working on these files
for the reentrant scanner/pure parser patches. This cleanup only
touches the code sections after the second '%%' in each file, via a
manually-supervised and locally hacked up pgindent.
We now create contype='n' pg_constraint rows for not-null constraints on
user tables. Only one such constraint is allowed for a column.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. These related constraints mostly
follow the well-known rules of conislocal and coninhcount that we have
for CHECK constraints, with some adaptations: for example, as opposed to
CHECK constraints, we don't match not-null ones by name when descending
a hierarchy to alter or remove it, instead matching by the name of the
column that they apply to. This means we don't require the constraint
names to be identical across a hierarchy.
The inheritance status of these constraints can be controlled: now we
can be sure that if a parent table has one, then all children will have
it as well. They can optionally be marked NO INHERIT, and then children
are free not to have one. (There's currently no support for altering a
NO INHERIT constraint into inheriting down the hierarchy, but that's a
desirable future feature.)
This also opens the door for having these constraints be marked NOT
VALID, as well as allowing UNIQUE+NOT NULL to be used for functional
dependency determination, as envisioned by commit e49ae8d3bc. It's
likely possible to allow DEFERRABLE constraints as followup work, as
well.
psql shows these constraints in \d+, though we may want to reconsider if
this turns out to be too noisy. Earlier versions of this patch hid
constraints that were on the same columns of the primary key, but I'm
not sure that that's very useful. If clutter is a problem, we might be
better off inventing a new \d++ command and not showing the constraints
in \d+.
For now, we omit these constraints on system catalog columns, because
they're unlikely to achieve anything.
The main difference to the previous attempt at this (b0e96f3119) is
that we now require that such a constraint always exists when a primary
key is in the column; we didn't require this previously which had a
number of unpalatable consequences. With this requirement, the code is
easier to reason about. For example:
- We no longer have "throwaway constraints" during pg_dump. We needed
those for the case where a table had a PK without a not-null
underneath, to prevent a slow scan of the data during restore of the
PK creation, which was particularly problematic for pg_upgrade.
- We no longer have to cope with attnotnull being set spuriously in
case a primary key is dropped indirectly (e.g., via DROP COLUMN).
Some bits of code in this patch were authored by Jian He.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: 何建 (jian he) <jian.universality@gmail.com>
Reviewed-by: 王刚 (Tender Wang) <tndrwang@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/202408310358.sdhumtyuy2ht@alvherre.pgsql
This patch responds to a comment that I (tgl) made in the
discussion leading up to 774171c4f, that really all errors
occurring during raw parsing should provide error cursors.
Syntax errors reported by Bison will have one, and most of
the handwritten ereport's in gram.y already provide one,
but there were a few stragglers.
(It is not claimed that this handles every failure reachable
during raw parsing --- out-of-memory is an obvious exception.
But this makes a good start on cases that are likely to occur.)
While we're at it, clean up the reported positions for errors
associated with LIMIT/OFFSET clauses. Previously we were
relying on applying exprLocation() to the contained expressions,
but that leads to slightly odd cursor placement, e.g.
regression=# (select * from foo limit 10) limit 10;
ERROR: multiple LIMIT clauses not allowed
LINE 1: (select * from foo limit 10) limit 10;
^
We can afford to keep a little more state in the transient
SelectLimit structs in order to make that better.
Jian He and Tom Lane (extracted from a larger patch by Jian,
with some additional work by me)
Discussion: https://postgr.es/m/CACJufxEmONE3P2En=jopZy1m=cCCUs65M4+1o52MW5og9oaUPA@mail.gmail.com
This allows an error cursor to be supplied for a bunch of
bad-function-definition errors that previously lacked one,
or that cheated a bit by pointing at the contained type name
when the error isn't really about that.
Bump catversion from an abundance of caution --- I don't think
this node type can actually appear in stored views/rules, but
better safe than sorry.
Jian He and Tom Lane (extracted from a larger patch by Jian,
with some additional work by me)
Discussion: https://postgr.es/m/CACJufxEmONE3P2En=jopZy1m=cCCUs65M4+1o52MW5og9oaUPA@mail.gmail.com
Previously, a Query generated through the transform phase would have
unset stmt_location, tracking the starting point of a query string.
Extensions relying on the statement location to extract its relevant
parts in the source text string would fallback to use the whole
statement instead, leading to confusing results like in
pg_stat_statements for queries relying on nested queries, like:
- EXPLAIN, with top-level and nested query using the same query string,
and a query ID coming from the nested query when the non-top-level
entry.
- Multi-statements, with only partial portions of queries being
normalized.
- COPY TO with a query, SELECT or DMLs.
This patch improves things by keeping track of the statement locations
and propagate it to Query during transform, allowing PGSS to only show
the relevant part of the query for nested query. This leads to less
bloat in entries for non-top-level entries, as queries can now be
grouped within the same (toplevel, queryid) duos in pg_stat_statements.
The result gives a stricter one-one mapping between query IDs and its
query strings.
The regression tests introduced in 45e0ba30fc produce differences
reflecting the new logic.
Author: Anthonin Bonnefoy
Reviewed-by: Michael Paquier, Jian He
Discussion: https://postgr.es/m/CAO6_XqqM6S9bQ2qd=75W+yKATwoazxSNhv5sjW06fjGAtHbTUA@mail.gmail.com
Up to now, the parser's reporting of a statement's stmt_location
included any preceding whitespace or comments. This isn't really
desirable but was done to avoid accounting honestly for nonterminals
that reduce to empty. It causes problems for pg_stat_statements,
which partially compensates by manually stripping whitespace, but
is not bright enough to strip /*-style comments. There will be
more problems with an upcoming patch to improve reporting of errors
in extension scripts, so it's time to do something about this.
The thing we have to do to make it work right is to adjust
YYLLOC_DEFAULT to scan the inputs of each production to find the
first one that has a valid location (i.e., did not reduce to
empty). In theory this adds a little bit of per-reduction overhead,
but in practice it's negligible. I checked by measuring the time
to run raw_parser() on the contents of information_schema.sql, and
there was basically no change.
Having done that, we can rely on any nonterminal that didn't reduce
to completely empty to have a correct starting location, and we don't
need the kluges the stmtmulti production formerly used.
This should have a side benefit of allowing parse error reports to
include an error position in some cases where they formerly failed to
do so, due to trying to report the position of an empty nonterminal.
I did not go looking for an example though. The one previously known
case where that could happen (OptSchemaEltList) no longer needs the
kluge it had; but I rather doubt that that was the only case.
Discussion: https://postgr.es/m/ZvV1ClhnbJLCz7Sm@msg.df7cb.de
This is a continuation of work like 11c34b342b, done to reduce the
bloat of pg_stat_statements by applying more normalization to query
entries. This commit is able to detect and normalize values in
VariableSetStmt, resulting in:
SET conf_param = $1
Compared to other parse nodes, VariableSetStmt is embedded in much more
places in the parser, impacting many query patterns in
pg_stat_statements. A custom jumble function is used, with an extra
field in the node to decide if arguments should be included in the
jumbling or not, a location field being not enough for this purpose.
This approach allows for a finer tuning.
Clauses relying on one or more keywords are not normalized, for example:
* DEFAULT
* FROM CURRENT
* List of keywords. SET SESSION CHARACTERISTICS AS TRANSACTION,
where it is critical to differentiate different sets of options, is a
good example of why normalization should not happen.
Some queries use VariableSetStmt for some subclauses with SET, that also
have their values normalized:
- ALTER DATABASE
- ALTER ROLE
- ALTER SYSTEM
- CREATE/ALTER FUNCTION
ba90eac7a9 has added test coverage for most of the existing SET
patterns. The expected output of these tests shows the difference this
commit creates. Normalization could be perhaps applied to more portions
of the grammar but what is done here is conservative, and good enough as
a starting point.
Author: Greg Sabino Mullane, Michael Paquier
Discussion: https://postgr.es/m/36e5bffe-e989-194f-85c8-06e7bc88e6f7@amazon.com
Discussion: https://postgr.es/m/B44FA29D-EBD0-4DD9-ABC2-16F1CB087074@amazon.com
Discussion: https://postgr.es/m/CAKAnmmJtJY2jzQN91=2QAD2eAJAA-Per61eyO48-TyxEg-q0Rg@mail.gmail.com
Since autovacuum does not trigger an ANALYZE for partitioned tables,
users must perform these manually. However, performing a manual ANALYZE
on a partitioned table would always result in recursively analyzing each
partition and that could be undesirable as autovacuum takes care of that.
For partitioned tables that contain a large number of partitions, having
to analyze each partition could take an unreasonably long time, especially
so for tables with a large number of columns.
Here we allow the ONLY keyword to prefix the name of the table to allow
users to have ANALYZE skip processing partitions. This option can also
be used with VACUUM, but there is no work to do if VACUUM ONLY is used on
a partitioned table.
This commit also changes the behavior of VACUUM and ANALYZE for
inheritance parents. Previously inheritance child tables would not be
processed when operating on the parent. Now, by default we *do* operate
on the child tables. ONLY can be used to obtain the old behavior.
The release notes should note this as an incompatibility. The default
behavior has not changed for partitioned tables as these always
recursively processed the partitions.
Author: Michael Harris <harmic@gmail.com>
Discussion: https://postgr.es/m/CADofcAWATx_haD=QkSxHbnTsAe6+e0Aw8Eh4H8cXyogGvn_kOg@mail.gmail.com
Discussion: https://postgr.es/m/CADofcAXVbD0yGp_EaC9chmzsOoSai3jcfBCnyva3j0RRdRvMVA@mail.gmail.com
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
(previously committed as 34768ee361, reverted by 8aee330af55; this is
essentially unchanged from those)
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
(previously committed as 46a0cd4cef, reverted by 46a0cd4cefb; the new
part is this:)
Because 'empty' && 'empty' is false, the temporal PK/UQ constraint
allowed duplicates, which is confusing to users and breaks internal
expectations. For instance, when GROUP BY checks functional
dependencies on the PK, it allows selecting other columns from the
table, but in the presence of duplicate keys you could get the value
from any of their rows. So we need to forbid empties.
This all means that at the moment we can only support ranges and
multiranges for temporal PK/UQs, unlike the original patch (above).
Documentation and tests for this are added. But this could
conceivably be extended by introducing some more general support for
the notion of "empty" for other types.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Currently, createPartitionTable() opens newly created table using its name.
This approach is prone to privilege escalation attack, because we might end
up opening another table than we just created.
This commit address the issue above by opening newly created table by its
OID. It appears to be tricky to get a relation OID out of ProcessUtility().
We have to extend TableLikeClause with new newRelationOid field, which is
filled within ProcessUtility() to be further accessed by caller.
Security: CVE-2014-0062
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20240808171351.a9.nmisch%40google.com
Reviewed-by: Pavel Borisov, Dmitry Koval
This used to be part of CREATE OPERATOR CLASS and ALTER OPERATOR
FAMILY, but it has done nothing (except issue a NOTICE) since
PostgreSQL 8.4. Commit 30e7c175b8 removed support for dumping from
pre-9.2 servers, so this no longer serves any need.
This now removes it completely, and you'd get a normal parse error if
you used it.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/113ef2d2-3657-4353-be97-f28fceddbca1%40eisentraut.org
This feature set did not handle empty ranges correctly, and it's now
too late for PostgreSQL 17 to fix it.
The following commits are reverted:
6db4598fcb Add stratnum GiST support function
46a0cd4cef Add temporal PRIMARY KEY and UNIQUE constraints
86232a49a4 Fix comment on gist_stratnum_btree
030e10ff1a Rename pg_constraint.conwithoutoverlaps to conperiod
a88c800deb Use daterange and YMD in without_overlaps tests instead of tsrange.
5577a71fb0 Use half-open interval notation in without_overlaps tests
34768ee361 Add temporal FOREIGN KEY contraints
482e108cd3 Add test for REPLICA IDENTITY with a temporal key
c3db1f30cb doc: clarify PERIOD and WITHOUT OVERLAPS in CREATE TABLE
144c2ce0cc Fix ON CONFLICT DO NOTHING/UPDATE for temporal indexes
Discussion: https://www.postgresql.org/message-id/d0b64a7a-dfe4-4b84-a906-c7dedfa40a3e@eisentraut.org
There are some problems with the new way to handle these constraints
that were detected at the last minute, and require fixes that appear too
invasive to be doing this late in the cycle. Revert this (again) for
now, we'll try again with these problems fixed.
The following commits are reverted:
b0e96f3119 Catalog not-null constraints
9b581c5341 Disallow changing NO INHERIT status of a not-null constraint
d0ec2ddbe0 Fix not-null constraint test
ac22a9545c Move privilege check to the right place
b0f7dd915b Check stack depth in new recursive functions
3af7217942 Update information_schema definition for not-null constraints
c3709100be Fix propagating attnotnull in multiple inheritance
d9f686a72e Fix restore of not-null constraints with inheritance
d72d32f52d Don't try to assign smart names to constraints
0cd711271d Better handle indirect constraint drops
13daa33fa5 Disallow NO INHERIT not-null constraints on partitioned tables
d45597f72f Disallow direct change of NO INHERIT of not-null constraints
21ac38f498 Fix inconsistencies in error messages
Discussion: https://postgr.es/m/202405110940.joxlqcx4dogd@alvherre.pgsql
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
A NESTED path allows to extract data from nested levels of JSON
objects given by the parent path expression, which are projected as
columns specified using a nested COLUMNS clause, just like the parent
COLUMNS clause. Rows comprised from a NESTED columns are "joined"
to the row comprised from the parent columns. If a particular NESTED
path evaluates to 0 rows, then the nested COLUMNS will emit NULLs,
making it an OUTER join.
NESTED columns themselves may include NESTED paths to allow
extracting data from arbitrary nesting levels, which are likewise
joined against the rows at the parent level.
Multiple NESTED paths at a given level are called "sibling" paths
and their rows are combined by UNIONing them, that is, after being
joined against the parent row as described above.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
This new DDL command merges several partitions into the one partition of the
target table. The target partition is created using new
createPartitionTable() function with parent partition as the template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This commit adds a new COPY option LOG_VERBOSITY, which controls the
amount of messages emitted during processing. Valid values are
'default' and 'verbose'.
This is currently used in COPY FROM when ON_ERROR option is set to
ignore. If 'verbose' is specified, a NOTICE message is emitted for
each discarded row, providing additional information such as line
number, column name, and the malformed value. This helps users to
identify problematic rows that failed to load.
Author: Bharath Rupireddy
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CALj2ACUk700cYhx1ATRQyRw-fBM%2BaRo6auRAitKGff7XNmYfqQ%40mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
This option can be used to switch a relation to use the access method
set by default_table_access_method when running the command.
This has come up when discussing the possibility to support setting
pg_class.relam for partitioned tables (left out here as future work),
while being useful on its own for relations with physical storage as
these must have an access method set.
Per suggestion from Justin Pryzby.
Author: Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/ZeCZ89xAVFeOmrQC@pryzbyj2023
A child table can specify a compression or storage method different
from its parents. This was previously an error. (But this was
inconsistently enforced because for example the settings could be
changed later using ALTER TABLE.) This now also allows an explicit
override if multiple parents have different compression or storage
settings, which was previously an error that could not be overridden.
The compression and storage properties remains unchanged in a child
inheriting from parent(s) after its creation, i.e., when using ALTER
TABLE ... INHERIT. (This is not changed.)
Before this change, the error detail would mention the first pair of
conflicting parent compression or storage methods. But with this
change it waits till the child specification is considered by which
time we may have encountered many such conflicting pairs. Hence the
error detail after this change does not include the conflicting
compression/storage methods. Those can be obtained from parent
definitions if necessary. The code to maintain list of all
conflicting methods or even the first conflicting pair does not seem
worth the convenience it offers. This change is inline with what we
do with conflicting default values.
Before this commit, the specified storage method could be stored in
ColumnDef::storage (CREATE TABLE ... LIKE) or ColumnDef::storage_name
(CREATE TABLE ...). This caused the MergeChildAttribute() and
MergeInheritedAttribute() to ignore a storage method specified in the
child definition since it looked only at ColumnDef::storage. This
commit removes ColumnDef::storage and instead uses
ColumnDef::storage_name to save any storage method specification. This
is similar to how compression method specification is handled.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/24656cec-d6ef-4d15-8b5b-e8dfc9c833a7@eisentraut.org
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
During the development that led to commit 357889eb17, for a time we
had the value LIMIT_OPTION_DEFAULT, which was mostly but not completely
removed later on, before commit. Complete the removal now.
Author: Zhang Mingli <avamingli@gmail.com>
Discussion: https://postgr.es/m/59d61a1a-3858-475a-964f-24468c97cc67@Spark
This removes the production json_encoding_clause_opt, instead merging
it into json_format_clause. Also remove the auxiliary
makeJsonEncoding() function.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202312071841.u2gueb5dsrbk%40alvherre.pgsql
Assigning a precedence to a keyword that isn't a kind of expression
operator is rather dangerous, because it might mask grammar
ambiguities that we'd rather know about. It's much safer to attach
explicit precedences to individual rules, which will affect the
behavior of only that one rule. Moreover, when we do have to give
a precedence to a non-operator keyword, we should try to give it the
same precedence as IDENT, thereby reducing the risk of surprising
side-effects.
Apply this hard-won knowledge to SET (which I misassigned ages ago
in commit 2647ad658) and some SQL/JSON-related productions
(from commits 6ee30209a, 71bfd1543).
Patch HEAD only, since there's no evidence of actual bugs here.
Discussion: https://postgr.es/m/CADT4RqBPdbsZW7HS1jJP319TMRHs1hzUiP=iRJYR6UqgHCrgNQ@mail.gmail.com
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
In hopes of putting these where any would-be implementer is sure to
find them, make a placeholder grammar production for ALTER DROP VALUE
and put them there. This is really just a docs patch, though.
Vik Fearing, with a bit more wordsmithing by me
Discussion: https://postgr.es/m/9fffd149-da0f-0c9c-6745-731fb688642a@postgresfriends.org
