This provides for cheaper mapping of child columns back to parent
columns. The one existing use-case in examine_simple_variable()
would hardly justify this by itself; but an upcoming bug fix will
make use of this array in a mainstream code path, and it seems
likely that we'll find other uses for it as we continue to build
out the partitioning infrastructure.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
We implement ON COMMIT DELETE ROWS by truncating tables marked that
way, which requires also truncating/rebuilding their indexes. But
RelationTruncateIndexes asks the relcache for up-to-date copies of any
index expressions, which may cause execution of eval_const_expressions
on them, which can result in actual execution of subexpressions.
This is a bad thing to have happening during ON COMMIT. Manuel Rigger
reported that use of a SQL function resulted in crashes due to
expectations that ActiveSnapshot would be set, which it isn't.
The most obvious fix perhaps would be to push a snapshot during
PreCommit_on_commit_actions, but I think that would just open the door
to more problems: CommitTransaction explicitly expects that no
user-defined code can be running at this point.
Fortunately, since we know that no tuples exist to be indexed, there
seems no need to use the real index expressions or predicates during
RelationTruncateIndexes. We can set up dummy index expressions
instead (we do need something that will expose the right data type,
as there are places that build index tupdescs based on this), and
just ignore predicates and exclusion constraints.
In a green field it'd likely be better to reimplement ON COMMIT DELETE
ROWS using the same "init fork" infrastructure used for unlogged
relations. That seems impractical without catalog changes though,
and even without that it'd be too big a change to back-patch.
So for now do it like this.
Per private report from Manuel Rigger. This has been broken forever,
so back-patch to all supported branches.
Make allow_system_table_mods settable at run time by superusers. It
was previously postmaster start only.
We don't want to make system catalog DDL wide-open, but there are
occasionally useful things to do like setting reloptions or statistics
on a busy system table, and blocking those doesn't help anyone. Also,
this enables the possibility of writing a test suite for this setting.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
The fix for CVE-2017-7484 disallowed use of pg_statistic data for
planning purposes if the user would not be able to select the associated
column and a non-leakproof function is to be applied to the statistics
values. That turns out to disable use of pg_statistic data in some
common cases involving inheritance/partitioning, where the user does
have permission to select from the parent table that was actually named
in the query, but not from a child table whose stats are needed. Since,
in non-corner cases, the user *can* select the child table's data via
the parent, this restriction is not actually useful from a security
standpoint. Improve the logic so that we also check the permissions of
the originally-named table, and allow access if select permission exists
for that.
When checking access to stats for a simple child column, we can map
the child column number back to the parent, and perform this test
exactly (including not allowing access if the child column isn't
exposed by the parent). For expression indexes, the current logic
just insists on whole-table select access, and this patch allows
access if the user can select the whole parent table. In principle,
if the child table has extra columns, this might allow access to
stats on columns the user can't read. In practice, it's unlikely
that the planner is going to do any stats calculations involving
expressions that are not visible to the query, so we'll ignore that
fine point for now. Perhaps someday we'll improve that logic to
detect exactly which columns are used by an expression index ...
but today is not that day.
Back-patch to v11. The issue was created in 9.2 and up by the
CVE-2017-7484 fix, but this patch depends on the append_rel_array[]
planner data structure which only exists in v11 and up. In
practice the issue is most urgent with partitioned tables, so
fixing v11 and later should satisfy much of the practical need.
Dilip Kumar and Amit Langote, with some kibitzing by me
Discussion: https://postgr.es/m/3876.1531261875@sss.pgh.pa.us
While a self-referential view doesn't actually work, it's possible
to create one, and it turns out that this breaks some of the
information_schema views. Those views call relation_is_updatable(),
which neglected to consider the hazards of being recursive. In
older PG versions you get a "stack depth limit exceeded" error,
but since v10 it'd recurse to the point of stack overrun and crash,
because commit a4c35ea1c took out the expression_returns_set() call
that was incidentally checking the stack depth.
Since this function is only used by information_schema views, it
seems like it'd be better to return "not updatable" than suffer
an error. Hence, add tracking of what views we're examining,
in just the same way that the nearby fireRIRrules() code detects
self-referential views. I added a check_stack_depth() call too,
just to be defensive.
Per private report from Manuel Rigger. Back-patch to all
supported versions.
Trying to use hypothetical indexes with BRIN currently fails when trying
to access a relation that does not exist when looking for the
statistics. With the current API, it is not possible to easily pass
a value for pages_per_range down to the hypothetical index, so this
makes use of the default value of BRIN_DEFAULT_PAGES_PER_RANGE, which
should be fine enough in most cases.
Being able to refine or enforce the hypothetical costs in more
optimistic ways would require more refactoring by filling in the
statistics when building IndexOptInfo in plancat.c. This would involve
ABI breakages around the costing routines, something not fit for stable
branches.
This is broken since 7e534ad, so backpatch down to v10.
Author: Julien Rouhaud, Heikki Linnakangas
Reviewed-by: Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_ZH0LKEA8VFCocr6Lpte1ab0b6FpvgS0y4way+RPSXfYg@mail.gmail.com
Backpatch-through: 10
Make patternsel_common() select the comparison operators to use with
hardwired logic that matches pattern_prefix()'s new logic, eliminating
its dependencies on particular index opfamilies.
This shouldn't change any behavior, as it's just replacing runtime
operator lookups with the same values hard-wired. But it makes these
closely-related functions look more alike, and saving some runtime
syscache lookups is worth something.
Actually, it's not quite true that this is zero behavioral change:
when estimating for a column of type "name", the comparison constant
will be kept as "text" not coerced to "name". But that's more correct
anyway, and it allows additional simplification of the coercion logic,
again syncing this more closely with pattern_prefix().
Per consideration of a report from Manuel Rigger.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
Historically, the planner's LIKE/regex index optimizations were only
carried out for specific index opfamilies. That's never been a great
idea from the standpoint of extensibility, but it didn't matter so
much as long as we had no practical way to extend such behaviors anyway.
With the addition of planner support functions, and in view of ongoing
work to support additional table and index AMs, it seems like a good
time to relax this.
Hence, recast the decisions in match_pattern_prefix() so that rather
than decide which operators to generate by looking at what the index
opfamily contains, we decide which operators to generate a-priori
and then see if the opfamily supports them. This is much more
defensible from a semantic standpoint anyway, since we know the
semantics of the chosen operators precisely, and we only need to
assume that the opfamily correctly implements operators it claims
to support.
The existing "pattern" opfamilies put a crimp in this approach, since
we need to select the pattern operators if we want those to work.
So we still have to special-case those opfamilies. But that seems
all right, since in view of the addition of collations, the pattern
opfamilies seem like a legacy hack that nobody will be building on.
The only immediate effect of this change, so far as the core code is
concerned, is that anchored LIKE/regex patterns can be mapped onto
BRIN index searches, and exact-match patterns can be mapped onto hash
indexes, not only btree and spgist indexes as before. That's not a
terribly exciting result, but it does fix an omission mentioned in
the ancient comments here.
Note: no catversion bump, even though this touches pg_operator.dat,
because it's only adding OID macros not changing the contents of
postgres.bki.
Per consideration of a report from Manuel Rigger.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
The planner's optimization code for LIKE and regex operators could
error out with a complaint like "no = operator for opfamily NNN"
if someone created a binary-compatible index (for example, a
bpchar_ops index on a text column) on the LIKE's left argument.
This is a consequence of careless refactoring in commit 74dfe58a5.
The old code in match_special_index_operator only accepted specific
combinations of the pattern operator and the index opclass, thereby
indirectly guaranteeing that the opclass would have a comparison
operator with the same LHS input type as the pattern operator.
While moving the logic out to a planner support function, I simplified
that test in a way that no longer guarantees that. Really though we'd
like an altogether weaker dependency on the opclass, so rather than
put back exactly the old code, just allow lookup failure. I have in
mind now to rewrite this logic completely, but this is the minimum
change needed to fix the bug in v12.
Per report from Manuel Rigger. Back-patch to v12 where the mistake
came in.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
It turns out that commit e9f1c01b7 missed a case: we must print a
VALUES clause in long format if get_query_def is given a resultDesc
that would require the query's output column name(s) to be different
from what the bare VALUES clause would produce.
This applies in case an ALTER ... RENAME COLUMN has been done to
a view that formerly could be printed in simple format, as shown
in the added regression test case. It also explains bug #16119
from Dmitry Telpt, because it turns out that (unlike CREATE VIEW)
CREATE MATERIALIZED VIEW fails to apply any column aliases it's
given to the stored ON SELECT rule. So to get them to be printed,
we have to account for the resultDesc renaming. It might be worth
changing the matview code so that it creates the ON SELECT rule
with the correct aliases; but we'd still need these messy checks in
get_simple_values_rte to handle the case of a subsequent column
rename, so any such change would be just neatnik-ism not a bug fix.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/16119-e64823f30a45a754@postgresql.org
When estimating number of distinct groups, we failed to ignore system
attributes when matching the group expressions to mvdistinct stats,
causing failures like
ERROR: negative bitmapset member not allowed
Fix that by simply skipping anything that is not a regular attribute.
Backpatch to PostgreSQL 10, where the extended stats were introduced.
Bug: #16111
Reported-by: Tuomas Leikola
Author: Tomas Vondra
Backpatch-through: 10
Discussion: https://postgr.es/m/16111-687799584c3a7e73@postgresql.org
We should throw an error for indeterminate collation, but bpcharne()
was missing that logic, resulting in a much less user-friendly error
(either an assertion failure or "cache lookup failed for collation 0").
Per report from Manuel Rigger. Back-patch to v12 where the mistake
came in, evidently in commit 5e1963fb7. (Before non-deterministic
collations, this function wasn't collation sensitive.)
Discussion: https://postgr.es/m/CA+u7OA4HOjtymxAbuGNh4-X_2R0Lw5n01tzvP8E5-i-2gQXYWA@mail.gmail.com
Bring datum_image_eq() in line with datumIsEqual() by adding support for
comparing cstring datums.
An upcoming patch that adds deduplication to the nbtree AM will use
datum_image_eq(). datum_image_eq() will need to work with all datatypes
that can be used as the storage type of a B-Tree index column, including
cstring. (cstring is used as the storage type for columns of type
"name" as a space-saving optimization.)
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
This completes the task begun in commit 1408d5d86, to synchronize
ECPG's exported definitions with the definition of bool used by
c.h (and, therefore, the one actually in use in the ECPG library).
On practically all modern platforms, ecpglib.h will now just
include <stdbool.h>, which should surprise nobody anymore.
That removes a header-inclusion-order hazard for ECPG clients,
who previously might get build failures or unexpected behavior
depending on whether they'd included <stdbool.h> themselves,
and if so, whether before or after ecpglib.h.
On platforms where sizeof(_Bool) is not 1 (only old PPC-based
Mac systems, as far as I know), things are still messy, as
inclusion of <stdbool.h> could still break ECPG client code.
There doesn't seem to be any clean fix for that, and given the
probably-negligible population of users who would care anymore,
it's not clear we should go far out of our way to cope with it.
This change at least fixes some header-inclusion-order hazards
for our own code, since c.h and ecpglib.h previously disagreed
on whether bool should be char or unsigned char.
To implement this with minimal invasion of ECPG client namespace,
move the choice of whether to rely on <stdbool.h> into configure,
and have it export a configuration symbol PG_USE_STDBOOL.
ecpglib.h no longer exports definitions for TRUE and FALSE,
only their lowercase brethren. We could undo that if we get
push-back about it.
Ideally we'd back-patch this as far as v11, which is where c.h
started to rely on <stdbool.h>. But the odds of creating problems
for formerly-working ECPG client code seem about as large as the
odds of fixing any non-working cases, so we'll just do this in HEAD.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
SPI gets used to build a list of relation OIDs for XML object
generation, and one code path building a list uses SPI_execute() without
looking at errors it produces. So fix that.
Author: Mark Dilger
Reviewed-by: Michael Paquier, Pavel Stehule
Discussion: https://postgr.es/m/17d30445-4862-7917-170f-84328dcd292d@gmail.com
This allows logging a sample of statements, without incurring excessive
log traffic (which may impact performance). This can be useful when
analyzing workloads with lots of short queries.
The sampling is configured using two new GUC parameters:
* log_min_duration_sample - minimum required statement duration
* log_statement_sample_rate - sample rate (0.0 - 1.0)
Only statements with duration exceeding log_min_duration_sample are
considered for sampling. To enable sampling, both those GUCs have to
be set correctly.
The existing log_min_duration_statement GUC has a higher priority, i.e.
statements with duration exceeding log_min_duration_statement will be
always logged, irrespectedly of how the sampling is configured. This
means only configurations
log_min_duration_sample < log_min_duration_statement
do actually sample the statements, instead of logging everything.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing, Tomas Vondra
Discussion: https://postgr.es/m/bbe0a1a8-a8f7-3be2-155a-888e661cc06c@anayrat.info
Since commit d26a810eb, we've defined bool as being either _Bool from
<stdbool.h>, or "unsigned char"; but that commit overlooked the fact
that probes.d has "#define bool char". For consistency, make it say
"unsigned char" instead. This should be strictly a cosmetic change,
but it seems best to be in sync.
Formally, in the now-normal case where we're using <stdbool.h>, it'd
be better to write "#define bool _Bool". However, then we'd need
some build infrastructure to inject that configuration choice into
probes.d, and it doesn't seem worth the trouble. We only use
<stdbool.h> if sizeof(_Bool) is 1, so having DTrace think that
bool parameters are "unsigned char" should be close enough.
Back-patch to v12 where d26a810eb came in.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Rearrange the logic in record_image_cmp() and datum_image_eq() to
error out on unexpected typlens (either not supported there or
completely invalid due to corruption). Barring corruption, this is
not possible today but it seems more future-proof and robust to fix
this.
Reported-by: Peter Geoghegan <pg@bowt.ie>
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
Teach get_expr_result_type() to manufacture a tuple descriptor directly
from a RowExpr node. If the RowExpr has type RECORD, this is the only
way to get a tupdesc for its result, since even if the rowtype has been
blessed, we don't have its typmod available at this point. (If the
RowExpr has some named composite type, we continue to let the existing
code handle it, since the RowExpr might well not have the correct column
names embedded in it.)
This fixes assorted corner cases illustrated by the added regression
tests.
Discussion: https://postgr.es/m/10872.1572202006@sss.pgh.pa.us
Commit 9556aa01c rearranged the innards of text_position() in a way
that would make it not work for empty search strings. Which is fine,
because all callers of that code special-case an empty pattern in
some way. However, the primary use-case (text_position itself) got
special-cased incorrectly: historically it's returned 1 not 0 for
an empty search string. Restore the historical behavior.
Per complaint from Austin Drenski (via Shay Rojansky).
Back-patch to v12 where it got broken.
Discussion: https://postgr.es/m/CADT4RqAz7oN4vkPir86Kg1_mQBmBxCp-L_=9vRpgSNPJf0KRkw@mail.gmail.com
Commit f8e5f156b added private state in postgres.c to track whether
a statement timeout is running. This seems like bad design to me;
timeout.c's private state should be the single source of truth about
that. We already fixed one bug associated with failure to keep those
states in sync (cf. be42015fc), and I've got little faith that we
won't find more in future. So get rid of postgres.c's local variable
by exposing a way to ask timeout.c whether a timeout is running.
(Obviously, such an inquiry is subject to race conditions, but it
seems fine for the purpose at hand.)
To make get_timeout_active() as cheap as possible, add a flag in
the per-timeout struct showing whether that timeout is active.
This allows some small savings elsewhere in timeout.c, mainly
elimination of unnecessary searches of the active_timeouts array.
While at it, fix enable_statement_timeout to not call disable_timeout
when statement_timeout is 0 and the timeout is not running. This
avoids a useless deschedule-and-reschedule-timeouts cycle, which
represents a significant savings (at least one kernel call) when
there is any other active timeout. Right now, there usually isn't,
but there are proposals around to change that.
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
While casting from timestamp to timestamptz we do timestamp2tm() then
tm2timestamp(). This commit eliminates call to tm2timestamp(). Instead, it
directly applies timezone offset to the original timestamp value. That makes
upcoming datetime overflow handling in jsonpath easier. That should also save
us some CPU cycles.
Discussion: https://postgr.es/m/CAPpHfdvRPRh_mTGar5WmDeRZ%3DU5dOXHdxspYYD%3D76m3knNGjXA%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
Since the introduction of different slot types, in 1a0586de36, we
create a virtual slot in tuplesort_begin_cluster(). While that looks
right, it unfortunately doesn't actually work, as ExecStoreHeapTuple()
is used to store tuples in the slot. Unfortunately no regression tests
for CLUSTER on expression indexes existed so far.
Fix the slot type, and add bare bones tests for CLUSTER on expression
indexes.
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20191011210320.GS10470@telsasoft.com
Backpatch: 12, like 1a0586de36
