There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
The fact that multixact truncations are not WAL logged has caused a fair
share of problems. Amongst others it requires to do computations during
recovery while the database is not in a consistent state, delaying
truncations till checkpoints, and handling members being truncated, but
offset not.
We tried to put bandaids on lots of these issues over the last years,
but it seems time to change course. Thus this patch introduces WAL
logging for multixact truncations.
This allows:
1) to perform the truncation directly during VACUUM, instead of delaying it
to the checkpoint.
2) to avoid looking at the offsets SLRU for truncation during recovery,
we can just use the master's values.
3) simplify a fair amount of logic to keep in memory limits straight,
this has gotten much easier
During the course of fixing this a bunch of additional bugs had to be
fixed:
1) Data was not purged from memory the member's SLRU before deleting
segments. This happened to be hard or impossible to hit due to the
interlock between checkpoints and truncation.
2) find_multixact_start() relied on SimpleLruDoesPhysicalPageExist - but
that doesn't work for offsets that haven't yet been flushed to
disk. Add code to flush the SLRUs to fix. Not pretty, but it feels
slightly safer to only make decisions based on actual on-disk state.
3) find_multixact_start() could be called concurrently with a truncation
and thus fail. Via SetOffsetVacuumLimit() that could lead to a round
of emergency vacuuming. The problem remains in
pg_get_multixact_members(), but that's quite harmless.
For now this is going to only get applied to 9.5+, leaving the issues in
the older branches in place. It is quite possible that we need to
backpatch at a later point though.
For the case this gets backpatched we need to handle that an updated
standby may be replaying WAL from a not-yet upgraded primary. We have to
recognize that situation and use "old style" truncation (i.e. looking at
the SLRUs) during WAL replay. In contrast to before, this now happens in
the startup process, when replaying a checkpoint record, instead of the
checkpointer. Doing truncation in the restartpoint is incorrect, they
can happen much later than the original checkpoint, thereby leading to
wraparound. To avoid "multixact_redo: unknown op code 48" errors
standbys would have to be upgraded before primaries.
A later patch will bump the WAL page magic, and remove the legacy
truncation codepaths. Legacy truncation support is just included to make
a possible future backpatch easier.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Reviewed-By: Robert Haas, Alvaro Herrera, Thomas Munro
Backpatch: 9.5 for now
Previously, a function call appearing at the top level of WHERE had a
hard-wired selectivity estimate of 0.3333333, a kludge conveniently dated
in the source code itself to July 1992. The expectation at the time was
that somebody would soon implement estimator support functions analogous
to those for operators; but no such code has appeared, nor does it seem
likely to in the near future. We do have an alternative solution though,
at least for immutable functions on single relations: creating an
expression index on the function call will allow ANALYZE to gather stats
about the function's selectivity. But the code in clause_selectivity()
failed to make use of such data even if it exists.
Refactor so that that will happen. I chose to make it try this technique
for any clause type for which clause_selectivity() doesn't have a special
case, not just functions. To avoid adding unnecessary overhead in the
common case where we don't learn anything new, make selfuncs.c provide an
API that hooks directly to examine_variable() and then var_eq_const(),
rather than the previous coding which laboriously constructed an OpExpr
only so that it could be expensively deconstructed again.
I preserved the behavior that the default estimate for a function call
is 0.3333333. (For any other expression node type, it's 0.5, as before.)
I had originally thought to make the default be 0.5 across the board, but
changing a default estimate that's survived for twenty-three years seems
like something not to do without a lot more testing than I care to put
into it right now.
Per a complaint from Jehan-Guillaume de Rorthais. Back-patch into 9.5,
but not further, at least for the moment.
This commit's parent made superfluous the bit's sole usage. Referential
integrity checks have long run as the subject table's owner, and that
now implies RLS bypass. Safe use of the bit was tricky, requiring
strict control over the SQL expressions evaluating therein. Back-patch
to 9.5, where the bit was introduced.
Based on a patch by Stephen Frost.
Every query of a single ENABLE ROW SECURITY table has two meanings, with
the row_security GUC selecting between them. With row_security=force
available, every function author would have been advised to either set
the GUC locally or test both meanings. Non-compliance would have
threatened reliability and, for SECURITY DEFINER functions, security.
Authors already face an obligation to account for search_path, and we
should not mimic that example. With this change, only BYPASSRLS roles
need exercise the aforementioned care. Back-patch to 9.5, where the
row_security GUC was introduced.
Since this narrows the domain of pg_db_role_setting.setconfig and
pg_proc.proconfig, one might bump catversion. A row_security=force
setting in one of those columns will elicit a clear message, so don't.
After an internal failure in shortest() or longest() while pinning down the
exact location of a match, find() forgot to free the DFA structure before
returning. This is pretty unlikely to occur, since we just successfully
ran the "search" variant of the DFA; but it could happen, and it would
result in a session-lifespan memory leak since this code uses malloc()
directly. Problem seems to have been aboriginal in Spencer's library,
so back-patch all the way.
In passing, correct a thinko in a comment I added awhile back about the
meaning of the "ntree" field.
I happened across these issues while comparing our code to Tcl's version
of the library.
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
This commit makes postmaster forcibly remove the files signaling
a standby promotion request. Otherwise, the existence of those files
can trigger a promotion too early, whether a user wants that or not.
This removal of files is usually unnecessary because they can exist
only during a few moments during a standby promotion. However
there is a race condition: if pg_ctl promote is executed and creates
the files during a promotion, the files can stay around even after
the server is brought up to new master. Then, if new standby starts
by using the backup taken from that master, the files can exist
at the server startup and should be removed in order to avoid
an unexpected promotion.
Back-patch to 9.1 where promote signal file was introduced.
Problem reported by Feike Steenbergen.
Original patch by Michael Paquier, modified by me.
Discussion: 20150528100705.4686.91426@wrigleys.postgresql.org
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
On recent AIX it's necessary to configure gcc to use the native assembler
(because the GNU assembler hasn't been updated to handle AIX 6+). This
caused PG builds to fail with assembler syntax errors, because we'd try
to compile s_lock.h's gcc asm fragment for PPC, and that assembly code
relied on GNU-style local labels. We can't substitute normal labels
because it would fail in any file containing more than one inlined use of
tas(). Fortunately, that code is stable enough, and the PPC ISA is simple
enough, that it doesn't seem like too much of a maintenance burden to just
hand-code the branch offsets, removing the need for any labels.
Note that the AIX assembler only accepts "$" for the location counter
pseudo-symbol. The usual GNU convention is "."; but it appears that all
versions of gas for PPC also accept "$", so in theory this patch will not
break any other PPC platforms.
This has been reported by a few people, but Steve Underwood gets the credit
for being the first to pursue the problem far enough to understand why it
was failing. Thanks also to Noah Misch for additional testing.
Since the distances used in this algorithm are small integers (not more
than the size of the U set, in fact), there is no good reason to use float
arithmetic for them. Use short ints instead: they're smaller, faster, and
require no special portability assumptions.
Per testing by Greg Stark, which disclosed that the code got into an
infinite loop on VAX for lack of IEEE-style float infinities. We don't
really care all that much whether Postgres can run on a VAX anymore,
but there seems sufficient reason to change this code anyway.
In passing, make a few other small adjustments to make the code match
usual Postgres coding style a bit better.
To avoid confusion, rename CreatePolicyStmt's 'cmd' to 'cmd_name',
parse_policy_command's 'cmd' to 'polcmd', and AlterPolicy's 'cmd_datum'
to 'polcmd_datum', per discussion with Noah and as a follow-up to his
correction of copynodes/equalnodes handling of the CreatePolicyStmt
'cmd' field.
Back-patch to 9.5 where the CreatePolicyStmt was introduced, as we
are still only in alpha.
In some corner cases, it is possible for the BRIN index relation to be
extended by brin_getinsertbuffer but the new page not be used
immediately for anything by its callers; when this happens, the page is
initialized and the FSM is updated (by brin_getinsertbuffer) with the
info about that page, but these actions are not WAL-logged. A later
index insert/update can use the page, but since the page is already
initialized, the initialization itself is not WAL-logged then either.
Replay of this sequence of events causes recovery to fail altogether.
There is a related corner case within brin_getinsertbuffer itself, in
which we extend the relation to put a new index tuple there, but later
find out that we cannot do so, and do not return the buffer; the page
obtained from extension is not even initialized. The resulting page is
lost forever.
To fix, shuffle the code so that initialization is not the
responsibility of brin_getinsertbuffer anymore, in normal cases;
instead, the initialization is done by its callers (brin_doinsert and
brin_doupdate) once they're certain that the page is going to be used.
When either those functions determine that the new page cannot be used,
before bailing out they initialize the page as an empty regular page,
enter it in FSM and WAL-log all this. This way, the page is usable for
future index insertions, and WAL replay doesn't find trying to insert
tuples in pages whose initialization didn't make it to the WAL. The
same strategy is used in brin_getinsertbuffer when it cannot return the
new page.
Additionally, add a new step to vacuuming so that all pages of the index
are scanned; whenever an uninitialized page is found, it is initialized
as empty and WAL-logged. This closes the hole that the relation is
extended but the system crashes before anything is WAL-logged about it.
We also take this opportunity to update the FSM, in case it has gotten
out of date.
Thanks to Heikki Linnakangas for finding the problem that kicked some
additional analysis of BRIN page assignment code.
Backpatch to 9.5, where BRIN was introduced.
Discussion: https://www.postgresql.org/message-id/20150723204810.GY5596@postgresql.org
Formerly, this function would always return "true" for an appendrel child
relation, because it would think that the appendrel parent was a potential
join target for the child. In principle that should only lead to some
inefficiency in planning, but fuzz testing by Andreas Seltenreich disclosed
that it could lead to "could not find pathkey item to sort" planner errors
in odd corner cases. Specifically, we would think that all columns of a
child table's multicolumn index were interesting pathkeys, causing us to
generate a MergeAppend path that sorts by all the columns. However, if any
of those columns weren't actually used above the level of the appendrel,
they would not get added to that rel's targetlist, which would result in
being unable to resolve the MergeAppend's sort keys against its targetlist
during createplan.c.
Backpatch to 9.3. In older versions, columns of an appendrel get added
to its targetlist even if they're not mentioned above the scan level,
so that the failure doesn't occur. It might be worth back-patching this
fix to older versions anyway, but I'll refrain for the moment.
pg_resetxlog.h contained two superfluous includes, origin.h superfluously
depended on logical.h, and pg_xlogdump's rmgrdesc.h only indirectly
included origin.h.
Backpatch: 9.5, where replication origins were introduced.
A few of the discrepancies had semantic significance, but I did not
track down the resulting user-visible bugs, if any. Back-patch to 9.5,
where all but one discrepancy appeared. The _equalCreateEventTrigStmt()
situation dates to 9.3 but does not affect semantics.
catversion bump due to readfuncs.c field order changes.
For correctness of summarization results, it is critical that the
snapshot used during the summarization scan is able to see all tuples
that are live to all transactions -- including tuples inserted or
deleted by in-progress transactions. Otherwise, it would be possible
for a transaction to insert a tuple, then idle for a long time while a
concurrent transaction executes summarization of the range: this would
result in the inserted value not being considered in the summary.
Previously we were trying to use a MVCC snapshot in conjunction with
adding a "placeholder" tuple in the index: the snapshot would see all
committed tuples, and the placeholder tuple would catch insertions by
any new inserters. The hole is that prior insertions by transactions
that are still in progress by the time the MVCC snapshot was taken were
ignored.
Kevin Grittner reported this as a bogus error message during vacuum with
default transaction isolation mode set to repeatable read (because the
error report mentioned a function name not being invoked during), but
the problem is larger than that.
To fix, tweak IndexBuildHeapRangeScan to have a new mode that behaves
the way we need using SnapshotAny visibility rules. This change
simplifies the BRIN code a bit, mainly by removing large comments that
were mistaken. Instead, rely on the SnapshotAny semantics to provide
what it needs. (The business about a placeholder tuple needs to remain:
that covers the case that a transaction inserts a a tuple in a page that
summarization already scanned.)
Discussion: https://www.postgresql.org/message-id/20150731175700.GX2441@postgresql.org
In passing, remove a couple of unused declarations from brin.h and
reword a comment to be proper English. This part submitted by Kevin
Grittner.
Backpatch to 9.5, where BRIN was introduced.
I appear to accidentally have switched the comments for
pg_atomic_write_u32 and pg_atomic_read_u32 around. Also fix some minor
typos I found while fixing.
Noticed-By: Amit Kapila
Backpatch: 9.5
The tuplesort/tuplestore memory management logic assumed that the chunk
allocation overhead for its memtuples array could not increase when
increasing the array size. This is and always was true for tuplesort,
but we (I, I think) blindly copied that logic into tuplestore.c without
noticing that the assumption failed to hold for the much smaller array
elements used by tuplestore. Given rather small work_mem, this could
result in an improper complaint about "unexpected out-of-memory situation",
as reported by Brent DeSpain in bug #13530.
The easiest way to fix this is just to increase tuplestore's initial
array size so that the assumption holds. Rather than relying on magic
constants, though, let's export a #define from aset.c that represents
the safe allocation threshold, and make tuplestore's calculation depend
on that.
Do the same in tuplesort.c to keep the logic looking parallel, even though
tuplesort.c isn't actually at risk at present. This will keep us from
breaking it if we ever muck with the allocation parameters in aset.c.
Back-patch to all supported versions. The error message doesn't occur
pre-9.3, not so much because the problem can't happen as because the
pre-9.3 tuplestore code neglected to check for it. (The chance of
trouble is a great deal larger as of 9.3, though, due to changes in the
array-size-increasing strategy.) However, allowing LACKMEM() to become
true unexpectedly could still result in less-than-desirable behavior,
so let's patch it all the way back.
Commit c9b0cbe98b accidentally broke the
order of operations during postmaster shutdown: it resulted in removing
the per-socket lockfiles after, not before, postmaster.pid. This creates
a race-condition hazard for a new postmaster that's started immediately
after observing that postmaster.pid has disappeared; if it sees the
socket lockfile still present, it will quite properly refuse to start.
This error appears to be the explanation for at least some of the
intermittent buildfarm failures we've seen in the pg_upgrade test.
Another problem, which has been there all along, is that the postmaster
has never bothered to close() its listen sockets, but has just allowed them
to close at process death. This creates a different race condition for an
incoming postmaster: it might be unable to bind to the desired listen
address because the old postmaster is still incumbent. This might explain
some odd failures we've seen in the past, too. (Note: this is not related
to the fact that individual backends don't close their client communication
sockets. That behavior is intentional and is not changed by this patch.)
Fix by adding an on_proc_exit function that closes the postmaster's ports
explicitly, and (in 9.3 and up) reshuffling the responsibility for where
to unlink the Unix socket files. Lock file unlinking can stay where it
is, but teach it to unlink the lock files in reverse order of creation.
The lwlock scalability work introduced two race conditions into the
lwlock variable support provided for xlog.c. First, and harmlessly on
most platforms, it set/read the variable without the spinlock in some
places. Secondly, due to the removal of the spinlock, it was possible
that a backend missed changes to the variable's state if it changed in
the wrong moment because checking the lock's state, the variable's state
and the queuing are not protected by a single spinlock acquisition
anymore.
To fix first move resetting the variable's from LWLockAcquireWithVar to
WALInsertLockRelease, via a new function LWLockReleaseClearVar. That
prevents issues around waiting for a variable's value to change when a
new locker has acquired the lock, but not yet set the value. Secondly
re-check that the variable hasn't changed after enqueing, that prevents
the issue that the lock has been released and already re-acquired by the
time the woken up backend checks for the lock's state.
Reported-By: Jeff Janes
Analyzed-By: Heikki Linnakangas
Reviewed-By: Heikki Linnakangas
Discussion: 5592DB35.2060401@iki.fi
Backpatch: 9.5, where the lwlock scalability went in
They are marked stable, but since they act on instantaneous state and it
is possible to consult state of transactions as they commit, the results
could change mid-query. They need to be marked volatile, and this
commit does so.
There would normally be a catversion bump here, but this is so much a
niche feature and I don't believe there's real damage from the incorrect
marking, that I refrained.
Backpatch to 9.5, where commit timestamps where introduced.
Per note from Fujii Masao.
Policy USING and WITH CHECK expressions were using EXPR_KIND_WHERE for
parse analysis, which results in inappropriate ERROR messages when
the expression contains unsupported constructs such as aggregates.
Create a new ParseExprKind called EXPR_KIND_POLICY and tailor the
related messages to fit.
Reported by Noah Misch. Reviewed by Dean Rasheed, Alvaro Herrera,
and Robert Haas. Back-patch to 9.5 where RLS was introduced.
When DefineQueryRewrite() is about to convert a table to a view, it checks
the table for features unavailable to views. For example, it rejects tables
having triggers. It omits to reject tables having relrowsecurity or a
pg_policy record. Fix that. To faciliate the repair, invent
relation_has_policies() which indicates the presence of policies on a
relation even when row security is disabled for that relation.
Reported by Noah Misch. Patch by me, review by Stephen Frost. Back-patch
to 9.5 where RLS was introduced.
CreatePolicy() and AlterPolicy() omit to create a pg_shdepend entry for
each role in the TO clause. Fix this by creating a new shared dependency
type called SHARED_DEPENDENCY_POLICY and assigning it to each role.
Reported by Noah Misch. Patch by me, reviewed by Alvaro Herrera.
Back-patch to 9.5 where RLS was introduced.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
On some platforms, notably ARM and PowerPC, 'char' is unsigned by
default. This fixes an assertion failure at WAL replay on such platforms.
Reported by Noah Misch. Backpatch to 9.5, where this was broken.
SP-GiST initialized an all-zeros page at vacuum, but that was not
WAL-logged, which is not safe. You might get a torn page write, when it gets
flushed to disk, and end-up with a half-initialized index page. To fix,
leave it in the all-zeros state, and add it to the FSM. It will be
initialized when reused. Also don't set the page-deleted flag when recycling
an empty page. That was also not WAL-logged, and a torn write of that would
cause the page to have an invalid checksum.
Backpatch to 9.2, where SP-GiST indexes were added.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
Handling of assigned-to expressions with indirection (e.g. set f1[1] =
3) was broken for ON CONFLICT DO UPDATE. The problem was that
ParseState was consulted to determine if an INSERT-appropriate or
UPDATE-appropriate behavior should be used when transforming expressions
with indirections. When the wrong path was taken the old row was
substituted with NULL, leading to wrong results..
To fix remove p_is_update and only use p_is_insert to decide how to
transform the assignment expression, and uset p_is_insert while parsing
the on conflict statement. This isn't particularly pretty, but it's not
any worse than before.
Author: Peter Geoghegan, slightly edited by me
Discussion: CAM3SWZS8RPvA=KFxADZWw3wAHnnbxMxDzkEC6fNaFc7zSm411w@mail.gmail.com
Backpatch: 9.5, where the feature was introduced
Remove HeapScanDescData.rs_initblock, which wasn't being used for anything
in the final version of the patch.
Fix IndexBuildHeapScan so that it supports syncscan again; the patch
broke synchronous scanning for index builds by forcing rs_startblk
to zero even when the caller did not care about that and had asked
for syncscan.
Add some commentary and usage defenses to heap_setscanlimits().
Fix heapam so that asking for rs_numblocks == 0 does what you would
reasonably expect. As coded it amounted to requesting a whole-table
scan, because those "--x <= 0" tests on an unsigned variable would
behave surprisingly.
In the passing, also move AT_ReAddComment to more logical position in the
enum, after all the Constraint-related subcommands.
This fixes a compiler warning, added by commit e42375fc. Backpatch to 9.5,
like that patch.
Previously, there was an inconsistency across json/jsonb operators that
operate on datums containing JSON arrays -- only some operators
supported negative array count-from-the-end subscripting. Specifically,
only a new-to-9.5 jsonb deletion operator had support (the new "jsonb -
integer" operator). This inconsistency seemed likely to be
counter-intuitive to users. To fix, allow all places where the user can
supply an integer subscript to accept a negative subscript value,
including path-orientated operators and functions, as well as other
extraction operators. This will need to be called out as an
incompatibility in the 9.5 release notes, since it's possible that users
are relying on certain established extraction operators changed here
yielding NULL in the event of a negative subscript.
For the json type, this requires adding a way of cheaply getting the
total JSON array element count ahead of time when parsing arrays with a
negative subscript involved, necessitating an ad-hoc lex and parse.
This is followed by a "conversion" from a negative subscript to its
equivalent positive-wise value using the count. From there on, it's as
if a positive-wise value was originally provided.
Note that there is still a minor inconsistency here across jsonb
deletion operators. Unlike the aforementioned new "-" deletion operator
that accepts an integer on its right hand side, the new "#-" path
orientated deletion variant does not throw an error when it appears like
an array subscript (input that could be recognized by as an integer
literal) is being used on an object, which is wrong-headed. The reason
for not being stricter is that it could be the case that an object pair
happens to have a key value that looks like an integer; in general,
these two possibilities are impossible to differentiate with rhs path
text[] argument elements. However, we still don't allow the "#-"
path-orientated deletion operator to perform array-style subscripting.
Rather, we just return the original left operand value in the event of a
negative subscript (which seems analogous to how the established
"jsonb/json #> text[]" path-orientated operator may yield NULL in the
event of an invalid subscript).
In passing, make SetArrayPath() stricter about not accepting cases where
there is trailing non-numeric garbage bytes rather than a clean NUL
byte. This means, for example, that strings like "10e10" are now not
accepted as an array subscript of 10 by some new-to-9.5 path-orientated
jsonb operators (e.g. the new #- operator). Finally, remove dead code
for jsonb subscript deletion; arguably, this should have been done in
commit b81c7b409.
Peter Geoghegan and Andrew Dunstan
When a column's datatype is changed, ATExecAlterColumnType() rebuilds all
the affected indexes and constraints, and the comments from the old
indexes/constraints were not carried over.
To fix, create a synthetic COMMENT ON command in the work queue, to re-add
any comments on constraints. For indexes, there's a comment field in
IndexStmt that is used.
This fixes bug #13126, reported by Kirill Simonov. Original patch by
Michael Paquier, reviewed by Petr Jelinek and me. This bug is present in
all versions, but only backpatch to 9.5. Given how minor the issue is, it
doesn't seem worth the work and risk to backpatch further than that.
This formalizes a decision implicit in commit
4ea51cdfe8 and adds clean detection of
affected systems. Vendor updates are available for each such known bug.
Back-patch to 9.5, where the aforementioned commit first appeared.
It's called "missing_ok" in the docs and in the C code.
I refrained from doing a catversion bump for this, because the name of an
input argument is just documentation, it has no effect on any callers.
Michael Paquier
Commit 179cdd09 added macros to check if a filename is a WAL segment
or other such file. However there were still some instances of the
strlen + strspn combination to check for that in WAL-related utilities
like pg_archivecleanup. Those checks can be replaced with the macros.
This patch makes use of the macros in those utilities and
which would make the code a bit easier to read.
Back-patch to 9.5.
Michael Paquier
Avoid memory leak from incorrect choice of how to free a StringInfo
(resetStringInfo doesn't do it). Now that pg_split_opts doesn't scribble
on the optstr, mark that as "const" for clarity. Attach the commentary in
protocol.sgml to the right place, and add documentation about the
user-visible effects of this change on postgres' -o option and libpq's
PGOPTIONS option.
