Commit 1ef917e3a6 fixed the re-indexing of ModifyTable's FDW arrays
when initial runtime pruning removes result relations, but it did so
by adding a new mt_fdwPrivLists field to ModifyTableState. Although
the field was placed at the end of the struct to keep the offsets of
existing fields stable, it still enlarges sizeof(ModifyTableState),
which the ABI compliance check flags on the buildfarm (e.g. crake).
The field existed only so that show_modifytable_info() could recover the
re-indexed fdw_private after executor startup; the executor-side fix in
ExecInitModifyTable() that actually prevents the crash does not depend on
it. Remove the field and have show_modifytable_info() instead look up
each kept relation's fdw_private from the original, pre-pruning
node->fdwPrivLists, which is parallel to node->resultRelations and left
intact by pruning. When nothing was pruned the lookup is a direct index;
otherwise it matches on the range table index.
This is applied to REL_18 only; master keeps the mt_fdwPrivLists field
and is unaffected, so the two diverge slightly here.
Reported on the buildfarm (member crake).
Per a suggestion from Tom Lane.
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEhe7-v5Q0-oOoW3RaO4voYcGK-JfinbYEWXwutDGSOtQ@mail.gmail.com
ExecInitModifyTable() rebuilds the per-result-relation lists after
dropping result relations removed by initial runtime pruning. The
re-indexing was done for withCheckOptionLists, returningLists,
updateColnosLists, mergeActionLists and mergeJoinConditions, but
fdwPrivLists and fdwDirectModifyPlans were missed. As a result, a
kept foreign result relation could be handed the wrong fdw_private,
or ri_usesFdwDirectModify could be set from the wrong plan index,
leading to wrong behavior or a crash in BeginForeignModify() and in
the direct-modify path.
show_modifytable_info() had the same problem: it indexed the
plan-ordered node->fdwPrivLists with the post-pruning executor
position, so once initial pruning removed a result relation it
could read a different relation's fdw_private (often a NIL entry),
producing wrong EXPLAIN output or a crash.
Fix by re-indexing fdwPrivLists and fdwDirectModifyPlans alongside
the other lists, saving the re-indexed private lists in
ModifyTableState.mt_fdwPrivLists and reading from there in both
nodeModifyTable.c and explain.c.
Reported-by: Chi Zhang <798604270@qq.com>
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Author: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/19484-a3cb82c8cde3c8fa%40postgresql.org
Backpatch-through: 18
This routine acts as a wrapper of a new pgstat_drop_entry_ext(), used in
the core code with a missing_ok argument.
This includes an update of .abi-compliance-history, removing the latest
entry that has documented the change of pgstat_drop_entry(). This
change is applied across v15~v18. HEAD keeps pgstat_drop_entry() as
single entry point, with the new missing_ok.
Per discussion with Álvaro Herrera and Lukas Fittl. This is a follow-up
of 850b9218c8.
Discussion: https://postgr.es/m/ajZz_sVJVX7pmPHo@alvherre.pgsql
Backpatch-through: 15-18
pgstat_drop_entry_internal() generates an ERROR if facing a pgstats
entry already marked as dropped. With a workload doing a lot of
concurrent CALL and DROP/CREATE PROCEDURE, it could be possible for
AtEOXact_PgStat_DroppedStats(), that wants to do transactional drops, to
find entries that are already dropped, after a commit record has been
written. In this case, ERRORs are upgraded to PANIC, taking down the
server.
This issue is fixed by making pgstat_drop_entry() optionally more
tolerant to concurrent drops, adding to the routine a missing_ok option
to make some of its callers more tolerant (spoiler: some of the callers
want a strict behavior, like replication slots and backend stats).
pgstat_drop_entry_internal() cannot be called anymore for an entry
marked as dropped, hence its error is replaced by an assertion.
Functions are handled as a special case in core; this problem could also
apply to custom stats kinds depending on what an extension does.
track_functions is costly when enabled (disabled by default), which is
perhaps the main reason why this has not be found yet.
A similar version of this patch has been proposed by Sami Imseih on a
different thread for a feature in development. This version has tweaked
here by me for the sake of fixing this issue.
Reported-by: zhanglihui <zlh21343@163.com>
Author: Sami Imseih <samimseih@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/19520-73873648d44793cf@postgresql.org
Backpatch-through: 15
When parsing expressions like (old).colname and (old).* in a RETURNING
list, the parser would lose track of the intended varreturningtype,
and therefore return incorrect results.
The root cause was code using GetNSItemByRangeTablePosn() to find a
namespace item from its rtindex and levelsup, without taking into
account returningtype, which would return the wrong namespace item.
Fix by adding a new function GetNSItemByVar() that does take
returningtype into account.
Backpatch to v18, where support for RETURNING OLD/NEW was added.
Bug: #19516
Reported-by: Marko Grujic <markoog@gmail.com>
Author: Marko Grujic <markoog@gmail.com>
Suggested-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAOvwyF2cO_5mAt=w=y-dFnaG5UkZ+3H8nSDoKF_iuWZHsU2ARg@mail.gmail.com
Backpatch-through: 18
The operators for array_eq, record_eq, range_eq, and multirange_eq
are all marked oprcanhash, but there's a pitfall: their hash functions
can fail at runtime if the contained type(s) are not hashable.
Therefore, the planner has to check hashability of the contained types
before deciding it can use hashing in these cases. Not every place
had gotten this memo, and noplace at all had considered the issue
for ranges or multiranges. In particular we could attempt to use
hashing for a ScalarArrayOpExpr on a container type when it won't
actually work, leading to "could not identify a hash function ..."
runtime failures.
For the most part we should fix this in the lookup functions provided
by lsyscache.c, to wit get_op_hash_functions and op_hashjoinable.
But there's a problem: get_op_hash_functions is not passed the input
data type it would need to check. We mustn't change the API of that
exported function in a back-patched fix, and even if we wanted to,
its call sites in the executor mostly don't have easy access to the
required data type OID. Fortunately, the executor call sites don't
actually need fixing, because it's expected that the planner verified
hashability before building a plan that requires it. Therefore,
leave get_op_hash_functions as-is and invent a wrapper function
get_op_hash_functions_ext that does the additional checking needed
in the planner's uses.
We also need to fix hash_ok_operator (extending the fix in 647889667).
While at it, neaten up a couple of places in lookup_type_cache where
relevant code for multirange cases was written differently from the
code for other container types.
Note: while this touches pg_operator.dat, it's only to add oid_symbol
macros. So there's no on-disk data change and no need for a
catversion bump.
Reported-by: Andrei Lepikhov <lepihov@gmail.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/ed221f95-f09b-4a9c-b05b-e1fed621ec87@gmail.com
Backpatch-through: 14
Commit b7b0f3f272 ("Use streaming I/O in sequential scans") routed
sequential scans through read_stream_next_buffer(), bypassing the
RELATION_IS_OTHER_TEMP() check in ReadBufferExtended(). As a result,
a superuser can attempt to read or modify temp tables of other
sessions through the read-stream path. When the query plan uses no index,
SELECT/UPDATE/DELETE/MERGE silently see no rows / report zero affected rows,
and COPY produces an empty output -- because the buffer manager has no
visibility into the owning session's local buffers and silently returns
nothing. Any query plan that uses, for instance, a btree index
still errors out via the existing check in ReadBufferExtended(), which
is reached from hio.c and nbtree respectively, but this is incidental.
Fix by enforcing RELATION_IS_OTHER_TEMP() at the three additional
buffer-manager entry points:
- read_stream_begin_impl() rejects the read at stream setup time,
covering sequential and bitmap scans that go through the
read-stream path.
- ReadBuffer_common() becomes the canonical place for the check,
consolidating the existing one previously kept in
ReadBufferExtended(). All ReadBufferExtended() callers go through
ReadBuffer_common(), so the consolidation is behavior-preserving.
- StartReadBuffersImpl() catches direct callers of StartReadBuffers()
that bypass both of the above. This is currently defense-in-depth,
but documents the contract for future code.
The companion test in src/test/modules/test_misc was added in the
preceding commit; this commit updates the assertions for SELECT,
UPDATE, DELETE, MERGE, and COPY (which previously documented the
bug as silent success) to expect the new error.
Author: Jim Jones <jim.jones@uni-muenster.de>
Author: Daniil Davydov <3danissimo@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJDiXghdFcZ8%3Dnh4G69te7iRr3Q0uFyXxb3ZdG09_GTNZXwH0g%40mail.gmail.com
Backpatch-through: 17
Add a TAP test in src/test/modules/test_misc that documents what
happens when one session attempts to read or modify another session's
temporary table. This commit only adds tests; it does not change
backend behavior, so the assertions reflect current behavior:
- SELECT, UPDATE, DELETE, MERGE, COPY on a table without an index
silently succeed with no error and zero rows / zero affected rows.
These commands run through the read-stream path, which currently
bypasses the RELATION_IS_OTHER_TEMP() check. This is the
underlying bug to be fixed in a follow-up.
- INSERT errors with "cannot access temporary tables of other
sessions" because hio.c calls ReadBufferExtended() to find a page
with free space and is caught by the existing check there.
- Index scan errors via the same existing check, reached through
nbtree -> ReadBuffer -> ReadBufferExtended.
- TRUNCATE / ALTER TABLE / ALTER INDEX / CLUSTER fail with their
command-specific error messages.
- VACUUM is silently skipped to avoid noise during database-wide
VACUUM (vacuum_rel() returns without warning).
- DROP TABLE is intentionally allowed: DROP does not touch the
table's contents, and autovacuum relies on this to clean up
temp relations orphaned by a crashed backend.
- ALTER FUNCTION / DROP FUNCTION on an owner-created function over
its own temp row type work as catalog operations -- they don't
read the underlying data.
- CREATE FUNCTION from a separate session, using another session's
temp row type as an argument, is allowed but emits a NOTICE: the
function is moved into the creator's pg_temp namespace with an
auto-dependency on the borrowed type, so it disappears together
with the session that created it.
- A bare DROP TABLE on a temp table that has a cross-session
dependent function fails with a catalog-level dependency error.
- LOCK TABLE in ACCESS SHARE mode on another session's temp table
succeeds and properly blocks the owner's session-exit cleanup
(which acquires AccessExclusiveLock via findDependentObjects).
This exercises the same LockRelationOid path used by autovacuum
when cleaning up orphaned temp relations.
- When the owner session ends, the normal session-exit cleanup
cascades through DEPENDENCY_NORMAL and removes both the temp
objects and any cross-session functions that depended on them.
Also, document the contract for RELATION_IS_OTHER_TEMP() so that
future buffer-access entry points enforce the same rule.
Backpatch this through PostgreSQL 17, where b7b0f3f272 introduces a code
path bypassing this check.
Author: Jim Jones <jim.jones@uni-muenster.de>
Author: Daniil Davydov <3danissimo@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJDiXghdFcZ8%3Dnh4G69te7iRr3Q0uFyXxb3ZdG09_GTNZXwH0g%40mail.gmail.com
Backpatch-through: 17
pg_rewind and pg_basebackup could be fed paths from rogue endpoints that
could overwrite the contents of the client when received, achieving path
traversal.
There were two areas in the tree that were sensitive to this problem:
- pg_basebackup, through the astreamer code, where no validation was
performed before building an output path when streaming tar data. This
is an issue in v15 and newer versions.
- pg_rewind file operations for paths received through libpq, for all
the stable branches supported.
In order to address this problem, this commit adds a helper function in
path.c, that reuses path_is_relative_and_below_cwd() after applying
canonicalize_path(). This can be used to validate the paths received
from a connection point. A path is considered invalid if any of the two
following conditions is satisfied:
- The path is absolute.
- The path includes a direct parent-directory reference.
Reported-by: XlabAI Team of Tencent Xuanwu Lab
Reported-by: Valery Gubanov <valerygubanov95@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6475
The number of NFA states, number of NFA arcs, and number of colors
are all bounded to reasonably small values. However, there are
places where we try to allocate arrays sized by products of those
quantities, and those calculations could overflow, enabling
buffer-overrun attacks. In practice there's no problem on 64-bit
machines, but there are some live scenarios on 32-bit machines.
A related problem is that citerdissect() and creviterdissect()
allocate arrays based on the length of the input string, which
potentially could overflow.
To fix, invent MALLOC_ARRAY and REALLOC_ARRAY macros that rely on
palloc_array_extended and repalloc_array_extended with the NO_OOM
option, similarly to the existing MALLOC and REALLOC macros.
(Like those, they'll throw an error not return a NULL result for
oversize requests. This doesn't really fit into the regex code's
view of error handling, but it'll do for now. We can consider
whether to change that behavior in a non-security follow-up patch.)
I installed similar defenses in the colormap construction code.
It's not entirely clear whether integer overflow is possible
there, but analyzing the behavior in detail seems not worth
the trouble, as the risky spots are not in hot code paths.
I left a bunch of calls as-is after verifying that they can't
overflow given reasonable limits on nstates and narcs. Those
limits were enforced already via REG_MAX_COMPILE_SPACE, but
add commentary to document the interactions.
In passing, also fix a related edge case, which is that the
special color numbers used in LACON carcs could overflow the
"color" data type, if ncolors is close to MAX_COLOR.
In v14 and v15, the regex engine calls malloc() directly instead
of using palloc(), so MALLOC_ARRAY and REALLOC_ARRAY do likewise.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
Sufficiently large "count" arguments could result in undetected
overflow, causing the allocated memory chunk to be much smaller
than what the caller will subsequently write into it. This is
unlikely to be a hazard with 64-bit size_t but can sometimes
happen on 32-bit builds, primarily where a function allocates
workspace that's significantly larger than its input data.
Rather than trying to patch the at-risk callers piecemeal,
let's just redefine these macros so that they always check.
To do that, move the longstanding add_size() and mul_size() functions
into palloc.h and mcxt.c, and adjust them to not be specific to
shared-memory allocation. Then invent palloc_mul(), palloc0_mul(),
palloc_mul_extended() to use these functions. Actually, the latter
use inlined copies to save one function call. repalloc_array() gets
similar treatment. I didn't bother trying to inline the calls for
repalloc0_array() though.
In v14 and v15, this also adds repalloc_extended(), which previously
was only available in v16 and up.
We need copies of all this in fe_memutils.[hc] as well, since that
module also provides palloc_array() etc.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
Commit 600086f47 added (several bespoke copies of) size_t addition with
overflow checks to libpq. Move this to common/int.h, along with
its subtraction and multiplication counterparts.
pg_neg_size_overflow() is intentionally omitted; I'm not sure we should
add SSIZE_MAX to win32_port.h for the sake of a function with no
callers.
Back-patch of commit 8934f2136, done now because pg_add_size_overflow()
and friends are needed more widely for security fixes.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi%2B%3D%2BpqUd2MUitvgW1pAJuXgG_TKCVc3_Ek7pe8z9nkf%2BAg%40mail.gmail.com
Backpatch-through: 14-18
Security: CVE-2026-6473
relation_has_unique_index_for() has long had an XXX noting that it
doesn't check collations when matching a unique index's columns
against equality clauses. This was benign as long as all collations
in play reduced to the same notion of equality, but has been incorrect
since nondeterministic collations were introduced in PG 12: a unique
index under a deterministic collation does not prove uniqueness under
a nondeterministic collation, nor vice versa.
The consequence is wrong query results for any planner optimization
that consumes the faulty proof, including inner-unique join execution
(which stops the inner search after the first match per outer row),
useless-left-join removal, semijoin-to-innerjoin reduction, and
self-join elimination.
Fix by requiring the index's collation to agree on equality with the
clause's input collation. Two collations agree on equality if either
is InvalidOid (denoting a non-collation-sensitive operation, which
cannot conflict with the other side), if they have the same OID, or if
both are deterministic: by definition a deterministic collation treats
two strings as equal iff they are byte-wise equal (see CREATE
COLLATION), so any two deterministic collations share the same
equality relation and the uniqueness proof carries over. Any mismatch
involving a nondeterministic collation is rejected.
Back-patch to all supported branches; the bug has existed since
nondeterministic collations were introduced in PG 12.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4_XUUSTyzCaRjUeeahWNqi=8ZOA5Q4coi8zUVEDSBkM6A@mail.gmail.com
Backpatch-through: 14
ExecEvalHashedScalarArrayOp(), when using a strict equality function,
performs a short-circuit when looking up NULL values. When the function
is non-strict, the code incorrectly looked up the hash table for a
zero-valued Datum, which could have resulted in an accidental true
return if the hash table contained zero valued Datum, or could result
in a crash for non-byval types.
Here we fix this by adding an extra step when we build the hash table to
check what the result of a NULL lookup would be. This requires looping
over the array and checking what the non-hashed version of the code
would do. We cache the results of that in the expression so that we can
reuse the result any time we're asked to search for a NULL value.
It's important to note that non-strict equality functions are free to
treat any NULL value as equal to any non-NULL value. For example,
someone may wish to design a type that treats an empty string and NULL
as equal.
All built-in types have strict equality functions, so this could affect
custom / user-defined types.
Author: Chengpeng Yan <chengpeng_yan@outlook.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: ChangAo Chen <cca5507@qq.com>
Discussion: https://postgr.es/m/A16187AE-2359-4265-9F5E-71D015EC2B2D@outlook.com
Backpatch-through: 14
When pulling up a subquery, its targetlist items may be wrapped in
PlaceHolderVars to enforce separate identity or as a result of outer
joins. This causes any upper-level WHERE clauses referencing these
outputs to contain PlaceHolderVars, which prevents partprune.c from
recognizing that they match partition key columns, defeating partition
pruning.
To fix, strip PlaceHolderVars from operands before comparing them to
partition keys. A PlaceHolderVar with empty phnullingrels appearing
in a relation-scan-level expression is effectively a no-op, so
stripping it is safe. This parallels the existing treatment in
indxpath.c for index matching.
In passing, rename strip_phvs_in_index_operand() to strip_noop_phvs()
and move it from indxpath.c to placeholder.c, since it is now a
general-purpose utility used by both index matching and partition
pruning code.
Back-patch to v18. Although this issue exists before that, changes in
that version made it common enough to notice. Given the lack of field
reports for older versions, I am not back-patching further. In the
v18 back-patch, strip_phvs_in_index_operand() is retained as a thin
wrapper around the new strip_noop_phvs() to avoid breaking third-party
extensions that may reference it.
Reported-by: Cándido Antonio Martínez Descalzo <candido@ninehq.com>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAH5YaUwVUWETTyVECTnhs7C=CVwi+uMSQH=cOkwAUqMdvXdwWA@mail.gmail.com
Backpatch-through: 18
Commit 58c1188a3e added PROCSIG_SLOTSYNC_MESSAGE in the middle of
enum ProcSignalReason, breaking the ABI.
Fix this by moving PROCSIG_SLOTSYNC_MESSAGE to the end of the enum,
to restore ordering.
Per buildfarm member crake.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwH_AAbtsiYDJt65N7_4PJ0CgOJmBEaCq68e5_tcuG_vXw@mail.gmail.com
Backpatch-through: 18 only
Previously, on standby promotion, the startup process sent SIGUSR1 to
the slotsync worker (or a backend performing slot synchronization) and
waited for it to exit. This worked in most cases, but if the process was
blocked waiting for a response from the primary (e.g., due to a network
failure), SIGUSR1 would not interrupt the wait. As a result, the process
could remain stuck, causing the startup process to wait for a long time
and delaying promotion.
This commit fixes the issue by introducing a new procsignal reason,
PROCSIG_SLOTSYNC_MESSAGE. On promotion, the startup process
sends this signal, and the handler sets interrupt flags so the process
exits (or errors out) promptly at CHECK_FOR_INTERRUPTS(), allowing
promotion to complete without delay.
Backpatch to v17, where slotsync was introduced.
Author: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwFzNYroAxSoyJhqTU-pH=t4Ej6RyvhVmBZ91Exj_TPMMQ@mail.gmail.com
Backpatch-through: 17
LLVM 22 has the fix that we copied into our tree in commit 9044fc1d and
a new function to reach it[1][2], so we only need to use our copy for
Aarch64 + LLVM < 22. The only change to the final version that our copy
didn't get is a new LLVM_ABI macro, but that isn't appropriate for us.
Our copy is hopefully now frozen and would only need maintenance if bugs
are found in the upstream code.
Non-Aarch64 systems now also use the new API with LLVM 22. It allocates
all sections with one contiguous mmap() instead of one per
section. We could have done that earlier, but commit 9044fc1d wanted to
limit the blast radius to the affected systems. We might as well
benefit from that small improvement everywhere now that it is available
out of the box.
We can't delete our copy until LLVM 22 is our minimum supported version,
or we switch to the newer JITLink API for at least Aarch64.
[1] https://github.com/llvm/llvm-project/pull/71968
[2] https://github.com/llvm/llvm-project/pull/174307
Backpatch-through: 14
Discussion: https://postgr.es/m/CA%2BhUKGJTumad75o8Zao-LFseEbt%3DenbUFCM7LZVV%3Dc8yg2i7dg%40mail.gmail.com
Previously, there was essentially no verification in this code that
the input is a tar file at all, let alone that it fits into the
subset of valid tar files that we can handle. This was exposed by
the discovery that we couldn't handle files that FreeBSD's tar
makes, because it's fairly aggressive about converting sparse WAL
files into sparse tar entries. To fix:
* Bail out if we find a pax extension header. This covers the
sparse-file case, and also protects us against scenarios where
the pax header changes other file properties that we care about.
(Eventually we may extend the logic to actually handle such
headers, but that won't happen in time for v19.)
* Be more wary about tar file type codes in general: do not assume
that anything that's neither a directory nor a symlink must be a
regular file. Instead, we just ignore entries that are none of the
three supported types.
* Apply pg_dump's isValidTarHeader to verify that a purported
header block is actually in tar format. To make this possible,
move isValidTarHeader into src/port/tar.c, which is probably where
it should have been since that file was created.
I also took the opportunity to const-ify the arguments of
isValidTarHeader and tarChecksum, and to use symbols not hard-wired
constants inside tarChecksum.
Back-patch to v18 but not further. Although this code exists inside
pg_basebackup in older branches, it's not really exposed in that
usage to tar files that weren't generated by our own code, so it
doesn't seem worth back-porting these changes across 3c9056981
and f80b09bac. I did choose to include a back-patch of 5868372bb
into v18 though, to minimize cosmetic differences between these
two branches.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/3049460.1775067940@sss.pgh.pa.us>
Backpatch-through: 18
If a CHECKPOINT record with nextMulti N is written to the WAL before
the CREATE_ID record for N, and N happens to be the first multixid on
an offset page, the backwards compatibility logic to tolerate WAL
generated by older minor versions (before commit 789d65364c) failed to
compensate for the missing XLOG_MULTIXACT_ZERO_OFF_PAGE record. In
that case, the latest_page_number was initialized at the start of WAL
replay to the page for nextMulti from the CHECKPOINT record, even if
we had not seen the CREATE_ID record for that multixid yet, which
fooled the backwards compatibility logic to think that the page was
already initialized.
To fix, track the last XLOG_MULTIXACT_ZERO_OFF_PAGE that we've seen
separately from latest_page_number. If we haven't seen any
XLOG_MULTIXACT_ZERO_OFF_PAGE records yet, use
SimpleLruDoesPhysicalPageExist() to check if the page needs to be
initialized.
Reported-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Analyzed-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/c4ef1737-8cba-458e-b6fd-4e2d6011e985.duankunren.dkr@alibaba-inc.com
Backpatch-through: 14-18
The function used GetXLogInsertRecPtr() to generate the fake LSN. Most
of the time this is the same as what XLogInsert() would return, and so
it works fine with the XLogFlush() call. But if the last record ends at
a page boundary, GetXLogInsertRecPtr() returns LSN pointing after the
page header. In such case XLogFlush() fails with errors like this:
ERROR: xlog flush request 0/01BD2018 is not satisfied --- flushed only to 0/01BD2000
Such failures are very hard to trigger, particularly outside aggressive
test scenarios.
Fixed by introducing GetXLogInsertEndRecPtr(), returning the correct LSN
without skipping the header. This is the same as GetXLogInsertRecPtr(),
except that it calls XLogBytePosToEndRecPtr().
Initial investigation by me, root cause identified by Andres Freund.
This is a long-standing bug in gistGetFakeLSN(), probably introduced by
c6b92041d3 in PG13. Backpatch to all supported versions.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/vf4hbwrotvhbgcnknrqmfbqlu75oyjkmausvy66ic7x7vuhafx@e4rvwavtjswo
Backpatch-through: 14
When I (rhaas) wrote the WAL summarizer code, I incorrectly believed
that XLOG_SMGR_TRUNCATE truncates all forks to the same length. In
fact, what other parts of the code do is compute the truncation length
for the FSM and VM forks from the truncation length used for the main
fork. But, because I was confused, I coded the WAL summarizer to set the
limit block for the VM fork to the same value as for the main fork.
(Incremental backup always copies FSM forks in full, so there is no
similar issue in that case.)
Doing that doesn't directly cause any data corruption, as far as I can
see. However, it does create a serious risk of consuming a large amount
of extra disk space, because pg_combinebackup's reconstruct.c believes
that the reconstructed file should always be at least as long as the
limit block value. We might want to be smarter about that at some point
in the future, because it's always safe to omit all-zeroes blocks at the
end of the last segment of a relation, and doing so could save disk
space, but the current algorithm will rarely waste enough disk space to
worry about unless we believe that a relation has been truncated to a
length much longer than its actual length on disk, which is exactly what
happens as a result of the problem mentioned in the previous paragraph.
To fix, create a new visibilitymap helper function and use it to include
the right limit block in the summary files. Incremental backups taken
with existing summary files will still have this issue, but this should
improve the situation going forward.
Diagnosed-by: Oleg Tkachenko <oatkachenko@gmail.com>
Diagnosed-by: Amul Sul <sulamul@gmail.com>
Discussion: http://postgr.es/m/CAAJ_b97PqG89hvPNJ8cGwmk94gJ9KOf_pLsowUyQGZgJY32o9g@mail.gmail.com
Discussion: http://postgr.es/m/6897DAF7-B699-41BF-A6FB-B818FCFFD585%40gmail.com
Backpatch-through: 17
Commit ab355e3a88 changed how the OldestMemberMXactId array is
indexed. It's no longer indexed by synthetic dummyBackendId, but with
ProcNumber. The PGPROC entries for prepared xacts come after auxiliary
processes in the allProcs array, which rendered the calculation for
MaxOldestSlot and the indexes into the array incorrect. (The
OldestVisibleMXactId array is not used for prepared xacts, and thus
never accessed with ProcNumber's greater than MaxBackends, so this
only affects the OldestMemberMXactId array.)
As a result, a prepared xact would store its value past the end of the
OldestMemberMXactId array, overflowing into the OldestVisibleMXactId
array. That could cause a transaction's row lock to appear invisible
to other backends, or other such visibility issues. With a very small
max_connections setting, the store could even go beyond the
OldestVisibleMXactId array, stomping over the first element in the
BufferDescriptor array.
To fix, calculate the array sizes more precisely, and introduce helper
functions to calculate the array indexes correctly.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/7acc94b0-ea82-4657-b1b0-77842cb7a60c@postgrespro.ru
Backpatch-through: 17
Although clang claims to be compatible with gcc's printf format
archetypes, this appears to be a falsehood: it likes __syslog__
(which gcc does not, on most platforms) and doesn't accept
gnu_printf. This means that if you try to use gcc with clang++
or clang with g++, you get compiler warnings when compiling
printf-like calls in our C++ code. This has been true for quite
awhile, but it's gotten more annoying with the recent appearance
of several buildfarm members that are configured like this.
To fix, run separate probes for the format archetype to use with the
C and C++ compilers, and conditionally define PG_PRINTF_ATTRIBUTE
depending on __cplusplus.
(We could alternatively insist that you not mix-and-match C and
C++ compilers; but if the case works otherwise, this is a poor
reason to insist on that.)
This commit back-patches 0909380e4 into supported branches.
Discussion: https://postgr.es/m/986485.1764825548@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
If a CREATE TABLE statement defined a constraint whose name is identical
to the name generated for a NOT NULL constraint, we'd throw an
(unnecessary) unique key violation error on
pg_constraint_conrelid_contypid_conname_index: this can easily be
avoided by choosing a different name for the NOT NULL constraint.
Fix by passing the constraint names already created by
AddRelationNewConstraints() to AddRelationNotNullConstraints(), so that
the latter can avoid name collisions with them.
Bug: #19393
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reported-by: Hüseyin Demir <huseyin.d3r@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/19393-6a82427485a744cf@postgresql.org
'latest_page_number' is set to the correct value, according to
nextOffset, early at system startup. Contrary to the comment, it hence
should be set up correctly by the time we get to WAL replay.
This fixes a failure to replay WAL generated on older minor versions,
before commit 789d65364c (18.2, 17.8, 16.12, 15.16, 14.21). The
failure occurs after a truncation record has been replayed and looks
like this:
FATAL: could not access status of transaction 858112
DETAIL: Could not read from file "pg_multixact/offsets/000D" at offset 24576: read too few bytes.
CONTEXT: WAL redo at 3/2A3AB408 for MultiXact/CREATE_ID: 858111 offset 6695072 nmembers 5: 1048228 (sh) 1048271 (keysh) 1048316 (sh) 1048344 (keysh) 1048370 (sh)
Reported-by: Sebastian Webber <sebastian@swebber.me>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/20260214090150.GC2297@p46.dedyn.io;lightning.p46.dedyn.io
Backpatch-through: 14-18
While the preceding commit prevented such attachments from occurring
in future, this one aims to prevent further abuse of any already-
created operator that exposes _int_matchsel to the wrong data types.
(No other contrib module has a vulnerable selectivity estimator.)
We need only check that the Const we've found in the query is indeed
of the type we expect (query_int), but there's a difficulty: as an
extension type, query_int doesn't have a fixed OID that we could
hard-code into the estimator.
Therefore, the bulk of this patch consists of infrastructure to let
an extension function securely look up the OID of a datatype
belonging to the same extension. (Extension authors have requested
such functionality before, so we anticipate that this code will
have additional non-security uses, and may soon be extended to allow
looking up other kinds of SQL objects.)
This is done by first finding the extension that owns the calling
function (there can be only one), and then thumbing through the
objects owned by that extension to find a type that has the desired
name. This is relatively expensive, especially for large extensions,
so a simple cache is put in front of these lookups.
Reported-by: Daniel Firer as part of zeroday.cloud
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14
These data types are represented like full-fledged arrays, but
functions that deal specifically with these types assume that the
array is 1-dimensional and contains no nulls. However, there are
cast pathways that allow general oid[] or int2[] arrays to be cast
to these types, allowing these expectations to be violated. This
can be exploited to cause server memory disclosure or SIGSEGV.
Fix by installing explicit checks in functions that accept these
types.
Reported-by: Altan Birler <altan.birler@tum.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2003
Backpatch-through: 14
A corrupted string could cause code that iterates with pg_mblen() to
overrun its buffer. Fix, by converting all callers to one of the
following:
1. Callers with a null-terminated string now use pg_mblen_cstr(), which
raises an "illegal byte sequence" error if it finds a terminator in the
middle of the sequence.
2. Callers with a length or end pointer now use either
pg_mblen_with_len() or pg_mblen_range(), for the same effect, depending
on which of the two seems more convenient at each site.
3. A small number of cases pre-validate a string, and can use
pg_mblen_unbounded().
The traditional pg_mblen() function and COPYCHAR macro still exist for
backward compatibility, but are no longer used by core code and are
hereby deprecated. The same applies to the t_isXXX() functions.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Paul Gerste (as part of zeroday.cloud)
Reported-by: Moritz Sanft (as part of zeroday.cloud)
Provide a way to disable the use of posix_fallocate() for relation
files. It was introduced by commit 4d330a61bb. The new setting
file_extend_method=write_zeros can be used as a workaround for problems
reported from the field:
* BTRFS compression is disabled by the use of posix_fallocate()
* XFS could produce spurious ENOSPC errors in some Linux kernel
versions, though that problem is reported to have been fixed
The default is file_extend_method=posix_fallocate if available, as
before. The write_zeros option is similar to PostgreSQL < 16, except
that now it's multi-block.
Backpatch-through: 16
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Discussion: https://postgr.es/m/b1843124-fd22-e279-a31f-252dffb6fbf2%40gmx.net
When using ALTER TABLE ... ADD CONSTRAINT to add a not-null constraint
with an explicit name, we have to ensure that if the column is already
marked NOT NULL, the provided name matches the existing constraint name.
Failing to do so could lead to confusion regarding which constraint
object actually enforces the rule.
This patch adds a check to throw an error if the user tries to add a
named not-null constraint to a column that already has one with a
different name.
Reported-by: yanliang lei <msdnchina@163.com>
Co-authored-by: Álvaro Herrera <alvherre@kurilemu.de>
Co-authored-bu: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/19351-8f1c523ead498545%40postgresql.org
The build generates four files based on the wait event contents stored
in wait_event_names.txt:
- wait_event_types.h
- pgstat_wait_event.c
- wait_event_funcs_data.c
- wait_event_types.sgml
The SGML file is generated as part of a documentation build, with its
data stored in doc/src/sgml/ for meson and configure. The three others
are handled differently for meson and configure:
- In configure, all the files are created in src/backend/utils/activity/.
A link to wait_event_types.h is created in src/include/utils/.
- In meson, all the files are created in src/include/utils/.
The two C files, pgstat_wait_event.c and wait_event_funcs_data.c, are
then included in respectively wait_event.c and wait_event_funcs.c,
without the "utils/" path.
For configure, this does not present a problem. For meson, this has to
be combined with a trick in src/backend/utils/activity/meson.build,
where include_directories needs to point to include/utils/ to make the
inclusion of the C files work properly, causing builds to pull in
PostgreSQL headers rather than system headers in some build paths, as
src/include/utils/ would take priority.
In order to fix this issue, this commit reworks the way the C/H files
are generated, becoming consistent with guc_tables.inc.c:
- For meson, basically nothing changes. The files are still generated
in src/include/utils/. The trick with include_directories is removed.
- For configure, the files are now generated in src/backend/utils/, with
links in src/include/utils/ pointing to the ones in src/backend/. This
requires extra rules in src/backend/utils/activity/Makefile so as a
make command in this sub-directory is able to work.
- The three files now fall under header-stamp, which is actually simpler
as guc_tables.inc.c does the same.
- wait_event_funcs_data.c and pgstat_wait_event.c are now included with
"utils/" in their path.
This problem has not been an issue in the buildfarm; it has been noted
with AIX and a conflict with float.h. This issue could, however, create
conflicts in the buildfarm depending on the environment with unexpected
headers pulled in, so this fix is backpatched down to where the
generation of the wait-event files has been introduced.
While on it, this commit simplifies wait_event_names.txt regarding the
paths of the files generated, to mention just the names of the files
generated. The paths where the files are generated became incorrect.
The path of the SGML path was wrong.
This change has been tested in the CI, down to v17. Locally, I have run
tests with configure (with and without VPATH), as well as meson, on the
three branches.
Combo oversight in fa88928470 and 1e68e43d3f.
Reported-by: Aditya Kamath <aditya.kamath1@ibm.com>
Discussion: https://postgr.es/m/LV8PR15MB64888765A43D229EA5D1CFE6D691A@LV8PR15MB6488.namprd15.prod.outlook.com
Backpatch-through: 17
A race condition could cause a newly synced replication slot to become
invalidated between its initial sync and the checkpoint.
When syncing a replication slot to a standby, the slot's initial
restart_lsn is taken from the publisher's remote_restart_lsn. Because slot
sync happens asynchronously, this value can lag behind the standby's
current redo pointer. Without any interlocking between WAL reservation and
checkpoints, a checkpoint may remove WAL required by the newly synced
slot, causing the slot to be invalidated.
To fix this, we acquire ReplicationSlotAllocationLock before reserving WAL
for a newly synced slot, similar to commit 006dd4b2e5. This ensures that
if WAL reservation happens first, the checkpoint process must wait for
slotsync to update the slot's restart_lsn before it computes the minimum
required LSN.
However, unlike in ReplicationSlotReserveWal(), this lock alone cannot
protect a newly synced slot if a checkpoint has already run
CheckPointReplicationSlots() before slotsync updates the slot. In such
cases, the remote restart_lsn may be stale and earlier than the current
redo pointer. To prevent relying on an outdated LSN, we use the oldest
WAL location available if it is greater than the remote restart_lsn.
This ensures that newly synced slots always start with a safe, non-stale
restart_lsn and are not invalidated by concurrent checkpoints.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Vitaly Davydov <v.davydov@postgrespro.ru>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Backpatch-through: 17
Discussion: https://postgr.es/m/TY4PR01MB16907E744589B1AB2EE89A31F94D7A%40TY4PR01MB16907.jpnprd01.prod.outlook.com
When executing a data-modifying CTE query containing MERGE and some
other DML operation on a table with statement-level AFTER triggers,
the transition tables passed to the triggers would fail to include the
rows affected by the MERGE.
The reason is that, when initializing a ModifyTable node for MERGE,
MakeTransitionCaptureState() would create a TransitionCaptureState
structure with a single "tcs_private" field pointing to an
AfterTriggersTableData structure with cmdType == CMD_MERGE. Tuples
captured there would then not be included in the sets of tuples
captured when executing INSERT/UPDATE/DELETE ModifyTable nodes in the
same query.
Since there are no MERGE triggers, we should only create
AfterTriggersTableData structures for INSERT/UPDATE/DELETE. Individual
MERGE actions should then use those, thereby sharing the same capture
tuplestores as any other DML commands executed in the same query.
This requires changing the TransitionCaptureState structure, replacing
"tcs_private" with 3 separate pointers to AfterTriggersTableData
structures, one for each of INSERT, UPDATE, and DELETE. Nominally,
this is an ABI break to a public structure in commands/trigger.h.
However, since this is a private field pointing to an opaque data
structure, the only way to create a valid TransitionCaptureState is by
calling MakeTransitionCaptureState(), and no extensions appear to be
doing that anyway, so it seems safe for back-patching.
Backpatch to v15, where MERGE was introduced.
Bug: #19380
Reported-by: Daniel Woelfel <dwwoelfel@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19380-4e293be2b4007248%40postgresql.org
Backpatch-through: 15
RangeTblEntry.groupexprs was marked with the node attribute
query_jumble_ignore, causing a list of GROUP BY expressions to be
ignored during the query jumbling. For example, these two queries could
be grouped together within the same query ID:
SELECT count(*) FROM t GROUP BY a;
SELECT count(*) FROM t GROUP BY b;
However, as such queries use different GROUP BY clauses, they should be
split across multiple entries.
This fixes an oversight in 247dea89f7, that has introduced an RTE for
GROUP BY clauses. Query IDs are documented as being stable across minor
releases, but as this is a regression new to v18 and that we are still
early in its support cycle, a backpatch is exceptionally done as this
has broken a behavior that exists since query jumbling is supported in
core, since its introduction in pg_stat_statements.
The tests of pg_stat_statements are expanded to cover this area, with
patterns involving GROUP BY and GROUPING clauses.
Author: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEy2W+tCqC7XuJ94r3ivWsM=onKJp94kRFx3hoARjBeFQ@mail.gmail.com
Backpatch-through: 18
When pulling up a subquery, we may need to wrap its targetlist items
in PlaceHolderVars to enforce separate identity or as a result of
outer joins. However, this causes any upper-level WHERE clauses
referencing these outputs to contain PlaceHolderVars, which prevents
indxpath.c from recognizing that they could be matched to index
columns or index expressions, potentially affecting the planner's
ability to use indexes.
To fix, explicitly strip PlaceHolderVars from index operands. A
PlaceHolderVar appearing in a relation-scan-level expression is
effectively a no-op. Nevertheless, to play it safe, we strip only
PlaceHolderVars that are not marked nullable.
The stripping is performed recursively to handle cases where
PlaceHolderVars are nested or interleaved with other node types. To
minimize performance impact, we first use a lightweight walker to
check for the presence of strippable PlaceHolderVars. The expensive
mutator is invoked only if a candidate is found, avoiding unnecessary
memory allocation and tree copying in the common case where no
PlaceHolderVars are present.
Back-patch to v18. Although this issue exists before that, changes in
this version made it common enough to notice. Given the lack of field
reports for older versions, I am not back-patching further.
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/62af586c-c270-44f3-9c5e-02c81d537e3d.gehaowu@bitmoe.com
Backpatch-through: 18
If there are any SRFs in a PathTarget, we must separate it into
SRF-computing and SRF-free targets. This is because the executor can
only handle SRFs that appear at the top level of the targetlist of a
ProjectSet plan node.
If we find a subexpression that matches an expression already computed
in the previous plan level, we should treat it like a Var and should
not split it again. setrefs.c will later replace the expression with
a Var referencing the subplan output.
However, when processing the grouping target for grouping sets, the
planner can fail to recognize that an expression is already computed
in the scan/join phase. The root cause is a mismatch in the
nullingrels bits. Expressions in the grouping target carry the
grouping nulling bit in their nullingrels to indicate that they can be
nulled by the grouping step. However, the corresponding expressions
in the scan/join target do not have these bits.
As a result, the exact match check in list_member() fails, leading the
planner to incorrectly believe that the expression needs to be
re-evaluated from its arguments, which are often not available in the
subplan. This can lead to planner errors such as "variable not found
in subplan target list".
To fix, ignore the grouping nulling bit when checking whether an
expression from the grouping target is available in the pre-grouping
input target. This aligns with the matching logic in setrefs.c.
Backpatch to v18, where this issue was introduced.
Bug: #19353
Reported-by: Marian MULLER REBEYROL <marian.muller@serli.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/19353-aaa179bba986a19b@postgresql.org
Backpatch-through: 18
Previously, ltree_prefix_eq_ci() used lowercasing with the default
collation; while ltree_crc32_sz() used tolower() directly. These were
equivalent only if the default collation provider was libc and the
encoding was single-byte.
Change both to use casefolding with the default collation.
Backpatch through 18, where the casefolding APIs were introduced. The
bug exists in earlier versions, but would require some adaptation.
A REINDEX is required for ltree indexes where the database default
collation is not libc.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Backpatch-through: 18
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Discussion: https://postgr.es/m/01fc00fd66f641b9693d4f9f1af0ccf44cbdfbdf.camel@j-davis.com
This removes a never-used CacheInvalidateHeapTupleInplace() parameter.
It adds README content about inplace update visibility in logical
decoding. It rewrites other comments.
Back-patch to v18, where commit 243e9b40f1
first appeared. Since this removes a CacheInvalidateHeapTupleInplace()
parameter, expect a v18 ".abi-compliance-history" edit to follow. PGXN
contains no calls to that function.
Reported-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reported-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Discussion: https://postgr.es/m/CA+renyU+LGLvCqS0=fHit-N1J-2=2_mPK97AQxvcfKm+F-DxJA@mail.gmail.com
Backpatch-through: 18
PostgreSQL's src/port/open.c has always set bInheritHandle = TRUE
when opening files on Windows, making all file descriptors inheritable
by child processes. This meant the O_CLOEXEC flag, added to many call
sites by commit 1da569ca1f (v16), was silently ignored.
The original commit included a comment suggesting that our open()
replacement doesn't create inheritable handles, but it was a mis-
understanding of the code path. In practice, the code was creating
inheritable handles in all cases.
This hasn't caused widespread problems because most child processes
(archive_command, COPY PROGRAM, etc.) operate on file paths passed as
arguments rather than inherited file descriptors. Even if a child
wanted to use an inherited handle, it would need to learn the numeric
handle value, which isn't passed through our IPC mechanisms.
Nonetheless, the current behavior is wrong. It violates documented
O_CLOEXEC semantics, contradicts our own code comments, and makes
PostgreSQL behave differently on Windows than on Unix. It also creates
potential issues with future code or security auditing tools.
To fix, define O_CLOEXEC to _O_NOINHERIT in master, previously used by
O_DSYNC. We use different values in the back branches to preserve
existing values. In pgwin32_open_handle() we set bInheritHandle
according to whether O_CLOEXEC is specified, for the same atomic
semantics as POSIX in multi-threaded programs that create processes.
Backpatch-through: 16
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com> (minor adjustments)
Discussion: https://postgr.es/m/e2b16375-7430-4053-bda3-5d2194ff1880%40gmail.com
The comment incorrectly indicated that indexcollations[] stored
collations for both key columns and INCLUDE columns, but in reality it
only has elements for the key columns. canreturn[] didn't get a mention,
so add that while we're here.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3LwbZgMKOQ9CmZarX5DEipKivdHp5PZMOO-riL0w%3DL%3D4A%40mail.gmail.com
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
Commit b4f584f9d2 (affecting v15~, later backpatched down to 13 as of
3635a0a35a) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
