LLVM 22 has the fix that we copied into our tree in commit 9044fc1d and
a new function to reach it[1][2], so we only need to use our copy for
Aarch64 + LLVM < 22. The only change to the final version that our copy
didn't get is a new LLVM_ABI macro, but that isn't appropriate for us.
Our copy is hopefully now frozen and would only need maintenance if bugs
are found in the upstream code.
Non-Aarch64 systems now also use the new API with LLVM 22. It allocates
all sections with one contiguous mmap() instead of one per
section. We could have done that earlier, but commit 9044fc1d wanted to
limit the blast radius to the affected systems. We might as well
benefit from that small improvement everywhere now that it is available
out of the box.
We can't delete our copy until LLVM 22 is our minimum supported version,
or we switch to the newer JITLink API for at least Aarch64.
[1] https://github.com/llvm/llvm-project/pull/71968
[2] https://github.com/llvm/llvm-project/pull/174307
Backpatch-through: 14
Discussion: https://postgr.es/m/CA%2BhUKGJTumad75o8Zao-LFseEbt%3DenbUFCM7LZVV%3Dc8yg2i7dg%40mail.gmail.com
If a CHECKPOINT record with nextMulti N is written to the WAL before
the CREATE_ID record for N, and N happens to be the first multixid on
an offset page, the backwards compatibility logic to tolerate WAL
generated by older minor versions (before commit 789d65364c) failed to
compensate for the missing XLOG_MULTIXACT_ZERO_OFF_PAGE record. In
that case, the latest_page_number was initialized at the start of WAL
replay to the page for nextMulti from the CHECKPOINT record, even if
we had not seen the CREATE_ID record for that multixid yet, which
fooled the backwards compatibility logic to think that the page was
already initialized.
To fix, track the last XLOG_MULTIXACT_ZERO_OFF_PAGE that we've seen
separately from latest_page_number. If we haven't seen any
XLOG_MULTIXACT_ZERO_OFF_PAGE records yet, use
SimpleLruDoesPhysicalPageExist() to check if the page needs to be
initialized.
Reported-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Analyzed-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/c4ef1737-8cba-458e-b6fd-4e2d6011e985.duankunren.dkr@alibaba-inc.com
Backpatch-through: 14-18
The function used GetXLogInsertRecPtr() to generate the fake LSN. Most
of the time this is the same as what XLogInsert() would return, and so
it works fine with the XLogFlush() call. But if the last record ends at
a page boundary, GetXLogInsertRecPtr() returns LSN pointing after the
page header. In such case XLogFlush() fails with errors like this:
ERROR: xlog flush request 0/01BD2018 is not satisfied --- flushed only to 0/01BD2000
Such failures are very hard to trigger, particularly outside aggressive
test scenarios.
Fixed by introducing GetXLogInsertEndRecPtr(), returning the correct LSN
without skipping the header. This is the same as GetXLogInsertRecPtr(),
except that it calls XLogBytePosToEndRecPtr().
Initial investigation by me, root cause identified by Andres Freund.
This is a long-standing bug in gistGetFakeLSN(), probably introduced by
c6b92041d3 in PG13. Backpatch to all supported versions.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/vf4hbwrotvhbgcnknrqmfbqlu75oyjkmausvy66ic7x7vuhafx@e4rvwavtjswo
Backpatch-through: 14
Although clang claims to be compatible with gcc's printf format
archetypes, this appears to be a falsehood: it likes __syslog__
(which gcc does not, on most platforms) and doesn't accept
gnu_printf. This means that if you try to use gcc with clang++
or clang with g++, you get compiler warnings when compiling
printf-like calls in our C++ code. This has been true for quite
awhile, but it's gotten more annoying with the recent appearance
of several buildfarm members that are configured like this.
To fix, run separate probes for the format archetype to use with the
C and C++ compilers, and conditionally define PG_PRINTF_ATTRIBUTE
depending on __cplusplus.
(We could alternatively insist that you not mix-and-match C and
C++ compilers; but if the case works otherwise, this is a poor
reason to insist on that.)
This commit back-patches 0909380e4 into supported branches.
Discussion: https://postgr.es/m/986485.1764825548@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
'latest_page_number' is set to the correct value, according to
nextOffset, early at system startup. Contrary to the comment, it hence
should be set up correctly by the time we get to WAL replay.
This fixes a failure to replay WAL generated on older minor versions,
before commit 789d65364c (18.2, 17.8, 16.12, 15.16, 14.21). The
failure occurs after a truncation record has been replayed and looks
like this:
FATAL: could not access status of transaction 858112
DETAIL: Could not read from file "pg_multixact/offsets/000D" at offset 24576: read too few bytes.
CONTEXT: WAL redo at 3/2A3AB408 for MultiXact/CREATE_ID: 858111 offset 6695072 nmembers 5: 1048228 (sh) 1048271 (keysh) 1048316 (sh) 1048344 (keysh) 1048370 (sh)
Reported-by: Sebastian Webber <sebastian@swebber.me>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/20260214090150.GC2297@p46.dedyn.io;lightning.p46.dedyn.io
Backpatch-through: 14-18
While the preceding commit prevented such attachments from occurring
in future, this one aims to prevent further abuse of any already-
created operator that exposes _int_matchsel to the wrong data types.
(No other contrib module has a vulnerable selectivity estimator.)
We need only check that the Const we've found in the query is indeed
of the type we expect (query_int), but there's a difficulty: as an
extension type, query_int doesn't have a fixed OID that we could
hard-code into the estimator.
Therefore, the bulk of this patch consists of infrastructure to let
an extension function securely look up the OID of a datatype
belonging to the same extension. (Extension authors have requested
such functionality before, so we anticipate that this code will
have additional non-security uses, and may soon be extended to allow
looking up other kinds of SQL objects.)
This is done by first finding the extension that owns the calling
function (there can be only one), and then thumbing through the
objects owned by that extension to find a type that has the desired
name. This is relatively expensive, especially for large extensions,
so a simple cache is put in front of these lookups.
Reported-by: Daniel Firer as part of zeroday.cloud
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14
An upcoming patch requires this cache so that it can track updates
in the pg_extension catalog. So far though, the EXTENSIONOID cache
only exists in v18 and up (see 490f869d9). We can add it in older
branches without an ABI break, if we are careful not to disturb the
numbering of existing syscache IDs.
In v16 and before, that just requires adding the new ID at the end
of the hand-assigned enum list, ignoring our convention about
alphabetizing the IDs. But in v17, genbki.pl enforces alphabetical
order of the IDs listed in MAKE_SYSCACHE macros. We can fake it
out by calling the new cache ZEXTENSIONOID.
Note that adding a syscache does change the required contents of the
relcache init file (pg_internal.init). But that isn't problematic
since we blow those away at postmaster start for other reasons.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14-17
These data types are represented like full-fledged arrays, but
functions that deal specifically with these types assume that the
array is 1-dimensional and contains no nulls. However, there are
cast pathways that allow general oid[] or int2[] arrays to be cast
to these types, allowing these expectations to be violated. This
can be exploited to cause server memory disclosure or SIGSEGV.
Fix by installing explicit checks in functions that accept these
types.
Reported-by: Altan Birler <altan.birler@tum.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2003
Backpatch-through: 14
A corrupted string could cause code that iterates with pg_mblen() to
overrun its buffer. Fix, by converting all callers to one of the
following:
1. Callers with a null-terminated string now use pg_mblen_cstr(), which
raises an "illegal byte sequence" error if it finds a terminator in the
middle of the sequence.
2. Callers with a length or end pointer now use either
pg_mblen_with_len() or pg_mblen_range(), for the same effect, depending
on which of the two seems more convenient at each site.
3. A small number of cases pre-validate a string, and can use
pg_mblen_unbounded().
The traditional pg_mblen() function and COPYCHAR macro still exist for
backward compatibility, but are no longer used by core code and are
hereby deprecated. The same applies to the t_isXXX() functions.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Paul Gerste (as part of zeroday.cloud)
Reported-by: Moritz Sanft (as part of zeroday.cloud)
Provide a way to disable the use of posix_fallocate() for relation
files. It was introduced by commit 4d330a61bb. The new setting
file_extend_method=write_zeros can be used as a workaround for problems
reported from the field:
* BTRFS compression is disabled by the use of posix_fallocate()
* XFS could produce spurious ENOSPC errors in some Linux kernel
versions, though that problem is reported to have been fixed
The default is file_extend_method=posix_fallocate if available, as
before. The write_zeros option is similar to PostgreSQL < 16, except
that now it's multi-block.
Backpatch-through: 16
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Discussion: https://postgr.es/m/b1843124-fd22-e279-a31f-252dffb6fbf2%40gmx.net
When executing a data-modifying CTE query containing MERGE and some
other DML operation on a table with statement-level AFTER triggers,
the transition tables passed to the triggers would fail to include the
rows affected by the MERGE.
The reason is that, when initializing a ModifyTable node for MERGE,
MakeTransitionCaptureState() would create a TransitionCaptureState
structure with a single "tcs_private" field pointing to an
AfterTriggersTableData structure with cmdType == CMD_MERGE. Tuples
captured there would then not be included in the sets of tuples
captured when executing INSERT/UPDATE/DELETE ModifyTable nodes in the
same query.
Since there are no MERGE triggers, we should only create
AfterTriggersTableData structures for INSERT/UPDATE/DELETE. Individual
MERGE actions should then use those, thereby sharing the same capture
tuplestores as any other DML commands executed in the same query.
This requires changing the TransitionCaptureState structure, replacing
"tcs_private" with 3 separate pointers to AfterTriggersTableData
structures, one for each of INSERT, UPDATE, and DELETE. Nominally,
this is an ABI break to a public structure in commands/trigger.h.
However, since this is a private field pointing to an opaque data
structure, the only way to create a valid TransitionCaptureState is by
calling MakeTransitionCaptureState(), and no extensions appear to be
doing that anyway, so it seems safe for back-patching.
Backpatch to v15, where MERGE was introduced.
Bug: #19380
Reported-by: Daniel Woelfel <dwwoelfel@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19380-4e293be2b4007248%40postgresql.org
Backpatch-through: 15
Commit 0bada39c83 fixed a bug of this kind,
which existed in all branches for six days before detection. While the
probability of reaching the trouble was low, the disruption was extreme. No
new backends could start, and service restoration needed an immediate
shutdown. Hence, add this to catch the next bug like it.
The new check in RelationIdGetRelation() suffices to make autovacuum detect
the bug in commit 243e9b40f1 that led to commit
0bada39. This also checks in a number of similar places. It replaces each
Assert(IsTransactionState()) that pertained to a conditional catalog read.
Back-patch to v14 - v17. This a back-patch of commit
f4ece891fc (from before v18 branched) to
all supported branches, to accompany the back-patch of commits 243e9b4
and 0bada39. For catalog indexes, the bttextcmp() behavior that
motivated IsCatalogTextUniqueIndexOid() was v18-specific. Hence, this
back-patch doesn't need that or its correction from commit
4a4ee0c2c1.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/20250410191830.0e.nmisch@google.com
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
Backpatch-through: 14-17
A buffer lock won't stop a reader having already checked tuple
visibility. If a vac_update_datfrozenid() and then a crash happened
during inplace update of a relfrozenxid value, datfrozenxid could
overtake relfrozenxid. That could lead to "could not access status of
transaction" errors.
Back-patch to v14 - v17. This is a back-patch of commits:
- 8e7e672cda
(main change, on master, before v18 branched)
- 8180136652
(defect fix, on master, before v18 branched)
It reverses commit bc6bad8857, my revert
of the original back-patch.
In v14, this also back-patches the assertion removal from commit
7fcf2faf9c.
Discussion: https://postgr.es/m/20240620012908.92.nmisch@google.com
Backpatch-through: 14-17
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption.
Back-patch to v14 - v17. This is a back-patch of commits:
- 243e9b40f1
(main change, on master, before v18 branched)
- 0bada39c83
(defect fix, on master, before v18 branched)
- bae8ca82fd
(cosmetics from post-commit review, on REL_18_STABLE)
It reverses commit c1099dd745, my revert
of the original back-patch of 243e9b4.
This back-patch omits the non-comment heap_decode() changes. I find
those changes removed harmless code that was last necessary in v13. See
discussion thread for details. The back branches aren't the place to
remove such code.
Like the original back-patch, this doesn't change WAL, because these
branches use end-of-recovery SIResetAll(). All branches change the ABI
of extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions. Expect
".abi-compliance-history" edits to follow.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Reviewed-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Nitin Motiani <nitinmotiani@google.com> (in earlier versions)
Reviewed-by: Andres Freund <andres@anarazel.de> (in earlier versions)
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
Backpatch-through: 14-17
PostgreSQL's src/port/open.c has always set bInheritHandle = TRUE
when opening files on Windows, making all file descriptors inheritable
by child processes. This meant the O_CLOEXEC flag, added to many call
sites by commit 1da569ca1f (v16), was silently ignored.
The original commit included a comment suggesting that our open()
replacement doesn't create inheritable handles, but it was a mis-
understanding of the code path. In practice, the code was creating
inheritable handles in all cases.
This hasn't caused widespread problems because most child processes
(archive_command, COPY PROGRAM, etc.) operate on file paths passed as
arguments rather than inherited file descriptors. Even if a child
wanted to use an inherited handle, it would need to learn the numeric
handle value, which isn't passed through our IPC mechanisms.
Nonetheless, the current behavior is wrong. It violates documented
O_CLOEXEC semantics, contradicts our own code comments, and makes
PostgreSQL behave differently on Windows than on Unix. It also creates
potential issues with future code or security auditing tools.
To fix, define O_CLOEXEC to _O_NOINHERIT in master, previously used by
O_DSYNC. We use different values in the back branches to preserve
existing values. In pgwin32_open_handle() we set bInheritHandle
according to whether O_CLOEXEC is specified, for the same atomic
semantics as POSIX in multi-threaded programs that create processes.
Backpatch-through: 16
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com> (minor adjustments)
Discussion: https://postgr.es/m/e2b16375-7430-4053-bda3-5d2194ff1880%40gmail.com
The comment incorrectly indicated that indexcollations[] stored
collations for both key columns and INCLUDE columns, but in reality it
only has elements for the key columns. canreturn[] didn't get a mention,
so add that while we're here.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3LwbZgMKOQ9CmZarX5DEipKivdHp5PZMOO-riL0w%3DL%3D4A%40mail.gmail.com
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
Commit b4f584f9d2 (affecting v15~, later backpatched down to 13 as of
3635a0a35a) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
log_error() would probably fail completely if used, and would
certainly print garbage for anything that needed to be interpolated
into the message, because it was failing to use the correct printing
subroutine for a va_list argument.
This bug likely went undetected because the error cases this code
is used for are rarely exercised - they only occur when Windows
security API calls fail catastrophically (out of memory, security
subsystem corruption, etc).
The FRONTEND variant can be fixed just by calling vfprintf()
instead of fprintf(). However, there was no va_list variant
of write_stderr(), so create one by refactoring that function.
Following the usual naming convention for such things, call
it vwrite_stderr().
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAF+pBj8goe4fRmZ0V3Cs6eyWzYLvK+HvFLYEYWG=TzaM+tWPnw@mail.gmail.com
Backpatch-through: 13
hash_xlog.h included descriptions for the blocks used in WAL records
that were was not completely consistent with how the records are
generated, with one block missing for SQUEEZE_PAGE, and inconsistent
descriptions used for block 0 in VACUUM_ONE_PAGE and MOVE_PAGE_CONTENTS.
This information was incorrect since c11453ce0a, cross-checking the
logic for the record generation.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CALdSSPj1j=a1d1hVA3oabRFz0hSU3KKrYtZPijw4UPUM7LY9zw@mail.gmail.com
Backpatch-through: 13
GucSource_Names was documented as being in guc.c, but since 0a20ff54f5
it is located in guc_tables.c. The reference to the location of
GucSource_Names is important, as GucSource needs to be kept in sync with
GucSource_Names.
Author: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwYPgAHWPYjPzK7iXzhSZ6MKR8w20_Nz7ZXpOvx=kZbs7A@mail.gmail.com
Backpatch-through: 16
When executing a MERGE UPDATE action, if there is more than one
concurrent update of the target row, the lock-and-retry code would
sometimes incorrectly identify the latest version of the target tuple,
leading to incorrect results.
This was caused by using the ctid field from the TM_FailureData
returned by table_tuple_lock() in a case where the result was TM_Ok,
which is unsafe because the TM_FailureData struct is not guaranteed to
be fully populated in that case. Instead, it should use the tupleid
passed to (and updated by) table_tuple_lock().
To reduce the chances of similar errors in the future, improve the
commentary for table_tuple_lock() and TM_FailureData to make it
clearer that table_tuple_lock() updates the tid passed to it, and most
fields of TM_FailureData should not be relied on in non-failure cases.
An exception to this is the "traversed" field, which is set in both
success and failure cases.
Reported-by: Dmitry <dsy.075@yandex.ru>
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1570d30e-2b95-4239-b9c3-f7bf2f2f8556@yandex.ru
Backpatch-through: 15
When executing a MERGE, check that the target relation supports all
actions mentioned in the MERGE command. Specifically, check that it
has a REPLICA IDENTITY if it publishes updates or deletes and the
MERGE command contains update or delete actions. Failing to do this
can silently break replication.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 15
If an INSERT has an ON CONFLICT DO UPDATE clause, the executor must
check that the target relation supports UPDATE as well as INSERT. In
particular, it must check that the target relation has a REPLICA
IDENTITY if it publishes updates. Formerly, it was not doing this
check, which could lead to silently breaking replication.
Fix by adding such a check to CheckValidResultRel(), which requires
adding a new onConflictAction argument. In back-branches, preserve ABI
compatibility by introducing a wrapper function with the original
signature.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 13
Commit c5b7ba4e6 changed things so that the ri_RootResultRelInfo field
of this struct is set for both partitions and inheritance children and
used for tuple routing and transition capture (before that commit, it
was only set for partitions to route tuples into), but failed to update
these comments.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14NF5CcdCmTZpxrvpvBiT0y4EqKikW1r_wAu1CEHeOmUA%40mail.gmail.com
Backpatch-through: 14
Commit e2d4ef8de8 (the fix for CVE-2017-7484) added security checks
to the selectivity estimation functions to prevent them from running
user-supplied operators on data obtained from pg_statistic if the user
lacks privileges to select from the underlying table. In cases
involving inheritance/partitioning, those checks were originally
performed against the child RTE (which for plain inheritance might
actually refer to the parent table). Commit 553d2ec271 then extended
that to also check the parent RTE, allowing access if the user had
permissions on either the parent or the child. It turns out, however,
that doing any checks using the child RTE is incorrect, since
securityQuals is set to NULL when creating an RTE for an inheritance
child (whether it refers to the parent table or the child table), and
therefore such checks do not correctly account for any RLS policies or
security barrier views. Therefore, do the security checks using only
the parent RTE. This is consistent with how RLS policies are applied,
and the executor's ACL checks, both of which use only the parent
table's permissions/policies. Similar checks are performed in the
extended stats code, so update that in the same way, centralizing all
the checks in a new function.
In addition, note that these checks by themselves are insufficient to
ensure that the user has access to the table's data because, in a
query that goes via a view, they only check that the view owner has
permissions on the underlying table, not that the current user has
permissions on the view itself. In the selectivity estimation
functions, there is no easy way to navigate from underlying tables to
views, so add permissions checks for all views mentioned in the query
to the planner startup code. If the user lacks permissions on a view,
a permissions error will now be reported at planner-startup, and the
selectivity estimation functions will not be run.
Checking view permissions at planner-startup in this way is a little
ugly, since the same checks will be repeated at executor-startup.
Longer-term, it might be better to move all the permissions checks
from the executor to the planner so that permissions errors can be
reported sooner, instead of creating a plan that won't ever be run.
However, such a change seems too far-reaching to be back-patched.
Back-patch to all supported versions. In v13, there is the added
complication that UPDATEs and DELETEs on inherited target tables are
planned using inheritance_planner(), which plans each inheritance
child table separately, so that the selectivity estimation functions
do not know that they are dealing with a child table accessed via its
parent. Handle that by checking access permissions on the top parent
table at planner-startup, in the same way as we do for views. Any
securityQuals on the top parent table are moved down to the child
tables by inheritance_planner(), so they continue to be checked by the
selectivity estimation functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-8713
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
Recent ICU versions have added U_SHOW_CPLUSPLUS_HEADER_API, and we need
to set this to zero as well to hide the ICU C++ APIs from pg_locale.h
Per discussion, we want cpluspluscheck to work cleanly in backbranches,
so backpatch both this and its predecessor commit ed26c4e25a to all
supported versions.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1115793.1754414782%40sss.pgh.pa.us
Backpatch-through: 13
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
We stopped defining IOV_MAX on non-Windows systems in 75357ab94, on
the assumption that every non-Windows system defines it in <limits.h>
as required by X/Open. GNU Hurd, however, doesn't follow that
standard either. Put back the old logic to assume 16 if it's
not defined.
Author: Michael Banck <mbanck@gmx.net>
Co-authored-by: Christoph Berg <myon@debian.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6862e8d1.050a0220.194b8d.76fa@mx.google.com
Discussion: https://postgr.es/m/6846e0c3.df0a0220.39ef9b.c60e@mx.google.com
Backpatch-through: 16
Commit 4909b38af0 introduced logic to distribute invalidation messages
from catalog-modifying transactions to all concurrent in-progress
transactions. However, since each transaction distributes not only its
original invalidation messages but also previously distributed
messages to other transactions, this leads to an exponential increase
in allocation request size for invalidation messages, ultimately
causing memory allocation failure.
This commit fixes this issue by tracking distributed invalidation
messages separately per decoded transaction and not redistributing
these messages to other in-progress transactions. The maximum size of
distributed invalidation messages that one transaction can store is
limited to MAX_DISTR_INVAL_MSG_PER_TXN (8MB). Once the size of the
distributed invalidation messages exceeds this threshold, we
invalidate all caches in locations where distributed invalidation
messages need to be executed.
Back-patch to all supported versions where we introduced the fix by
commit 4909b38af0.
Note that this commit adds two new fields to ReorderBufferTXN to store
the distributed transactions. This change breaks ABI compatibility in
back branches, affecting third-party extensions that depend on the
size of the ReorderBufferTXN struct, though this scenario seems
unlikely.
Additionally, it adds a new flag to the txn_flags field of
ReorderBufferTXN to indicate distributed invalidation message
overflow. This should not affect existing implementations, as it is
unlikely that third-party extensions use unused bits in the txn_flags
field.
Bug: #18938#18942
Author: vignesh C <vignesh21@gmail.com>
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: John Hutchins <john.hutchins@wicourts.gov>
Reported-by: Laurence Parry <greenreaper@hotmail.com>
Reported-by: Max Madden <maxmmadden@gmail.com>
Reported-by: Braulio Fdo Gonzalez <brauliofg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/680bdaf6-f7d1-4536-b580-05c2760c67c6@deepbluecap.com
Discussion: https://postgr.es/m/18942-0ab1e5ae156613ad@postgresql.org
Discussion: https://postgr.es/m/18938-57c9a1c463b68ce0@postgresql.org
Discussion: https://postgr.es/m/CAD1FGCT2sYrP_70RTuo56QTizyc+J3wJdtn2gtO3VttQFpdMZg@mail.gmail.com
Discussion: https://postgr.es/m/CANO2=B=2BT1hSYCE=nuuTnVTnjidMg0+-FfnRnqM6kd23qoygg@mail.gmail.com
Backpatch-through: 13
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <noah@leadboat.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
synchronous_standby_names cannot be reloaded safely by backends, and the
checkpointer is in charge of updating a state in shared memory if the
GUC is enabled in WalSndCtl, to let the backends know if they should
wait or not for a given LSN. This provides a strict control on the
timing of the waiting queues if the GUC is enabled or disabled, then
reloaded. The checkpointer is also in charge of waking up the backends
that could be waiting for a LSN when the GUC is disabled.
This logic had a race condition at startup, where it would be possible
for backends to not wait for a LSN even if synchronous_standby_names is
enabled. This would cause visibility issues with transactions that we
should be waiting for but they were not. The problem lasts until the
checkpointer does its initial update of the shared memory state when it
loads synchronous_standby_names.
In order to take care of this problem, the shared memory state in
WalSndCtl is extended to detect if it has been initialized by the
checkpointer, and not only check if synchronous_standby_names is
defined. In WalSndCtlData, sync_standbys_defined is renamed to
sync_standbys_status, a bits8 able to know about two states:
- If the shared memory state has been initialized. This flag is set by
the checkpointer at startup once, and never removed.
- If synchronous_standby_names is known as defined in the shared memory
state. This is the same as the previous sync_standbys_defined in
WalSndCtl.
This method gives a way for backends to decide what they should do until
the shared memory area is initialized, and they now ultimately fall back
to a check on the GUC value in this case, which is the best thing that
can be done.
Fortunately, SyncRepUpdateSyncStandbysDefined() is called immediately by
the checkpointer when this process starts, so the window is very narrow.
It is possible to enlarge the problematic window by making the
checkpointer wait at the beginning of SyncRepUpdateSyncStandbysDefined()
with a hardcoded sleep for example, and doing so has showed that a 2PC
visibility test is indeed failing. On machines slow enough, this bug
would cause spurious failures.
In 17~, we have looked at the possibility of adding an injection point
to have a reproducible test, but as the problematic window happens at
early startup, we would need to invent a way to make an injection point
optionally persistent across restarts when attached, something that
would be fine for this case as it would involve the checkpointer. This
issue is quite old, and can be reproduced on all the stable branches.
Author: Melnikov Maksim <m.melnikov@postgrespro.ru>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/163fcbec-900b-4b07-beaa-d2ead8634bec@postgrespro.ru
Backpatch-through: 13
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
We observed performance regression primarily during frequent execution of
*publication DDL* statements that modify the published tables. The
regression is minor or nearly nonexistent for DDLs that do not affect the
published tables or occur infrequently, making this a worthwhile cost to
resolve a longstanding data loss issue.
An alternative approach considered was to take a strong lock on each
affected table during publication modification. However, this would only
address issues related to publication DDLs (but not the ALTER TYPE ...)
and require locking every relation in the database for publications
created as FOR ALL TABLES, which is impractical.
The bug exists in all supported branches, but we are backpatching till 14.
The fix for 13 requires somewhat bigger changes than this fix, so the fix
for that branch is still under discussion.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd5 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
The changes made in commit d2b4b4c225 contained incorrect comments:
They said that certain forward declarations were necessary to "avoid
including pathnodes.h here", but the file is itself pathnodes.h! So
change the comment to just say it's a forward declaration in one case,
and in the other case we don't need the declaration at all because it
already appeared earlier in the file.
As of 15.4, macOS has strchrnul(), but access to it is blocked behind
a check for MACOSX_DEPLOYMENT_TARGET >= 15.4. But our does-it-link
configure check finds it, so we try to use it, and fail with the
present default deployment target (namely 15.0). This accounts for
today's buildfarm failures on indri and sifaka.
This is the identical problem that we faced some years ago when Apple
introduced preadv and pwritev in the same way. We solved that in
commit f014b1b9b by using AC_CHECK_DECLS instead of AC_CHECK_FUNCS
to check the functions' availability. So do the same now for
strchrnul(). Interestingly, we already had a workaround for
"the link check doesn't agree with <string.h>" cases with glibc,
which we no longer need since only the header declaration is being
checked.
Testing this revealed that the meson version of this check has never
worked, because it failed to use "-Werror=unguarded-availability-new".
(Apparently nobody's tried to build with meson on macOS versions that
lack preadv/pwritev as standard.) Adjust that while at it. Also,
we had never put support for "-Werror=unguarded-availability-new"
into v13, but we need that now.
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/385134.1743523038@sss.pgh.pa.us
Backpatch-through: 13
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
This commit adds fmtIdEnc() and fmtQualifiedIdEnc(), which allow to specify
the encoding as an explicit argument. Additionally setFmtEncoding() is
provided, which defines the encoding when no explicit encoding is provided, to
avoid breaking all code using fmtId().
All users of fmtId()/fmtQualifiedId() are either converted to the explicit
version or a call to setFmtEncoding() has been added.
This commit does not yet utilize the now well-defined encoding, that will
happen in a subsequent commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Security: CVE-2025-1094
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <noah@leadboat.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 13
Security: CVE-2025-1094
