Commit 65c3bf19fd moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
The problem was that "begin transaction" was issued automatically
before executing COMMIT/ROLLBACK PREPARED if not in auto commit. This fix by
Masahiko Sawada fixes this.
Clean up some technical debt left behind by commit 72b1e3a21: instead of
quickly hacking the name of base_yylex() with a #define, set it properly
with "%option prefix". This causes the names of pgc.l's other exported
symbols to change as well, so run around and modify the outside references
to them as needed. Similarly, make pgc.l's external references to
base_yylval use that variable's true name instead of a macro.
The reason for doing this now is that the quick-hack solution will fail
with future versions of flex, as reported by Дилян Палаузов.
Hence, back-patch into 9.6 where the previous commit appeared, since
it's likely people will build 9.6 with newer flex versions during
its lifetime.
Discussion: https://postgr.es/m/d845c1af-e18d-6651-178f-9f08cdf37e10@aegee.org
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
On Windows, libc will mask \r\n line endings for us, since we read the
password file in text mode. But that doesn't happen on Unix. People
who share password files across both systems might have \r\n line endings
in a file they use on Unix, so as a convenience, ignore trailing \r.
Per gripe from Josh Berkus.
In passing, put the existing check for empty line somewhere where it's
actually useful, ie after stripping the newline not before.
Vik Fearing, adjusted a bit by me
Discussion: <0de37763-5843-b2cc-855e-5d0e5df25807@agliodbs.com>
Ordinarily there would not be an async result sitting around at this
point, but it appears that in corner cases there can be. Considering
all the work we're about to launch, it's hardly going to cost anything
noticeable to check.
It's been like this forever, so back-patch to all supported branches.
Report: <CAD-Qf1eLUtBOTPXyFQGW-4eEsop31tVVdZPu4kL9pbQ6tJPO8g@mail.gmail.com>
Leaving the error in the error queue used to be harmless, because the
X509_STORE_load_locations() call used to be the last step in
initialize_SSL(), and we would clear the queue before the next
SSL_connect() call. But previous commit moved things around. The symptom
was that if a CRL file was not found, and one of the subsequent
initialization steps, like loading the client certificate or private key,
failed, we would incorrectly print the "no such file" error message from
the earlier X509_STORE_load_locations() call as the reason.
Backpatch to all supported versions, like the previous patch.
There were several issues with the old coding:
1. There was a race condition, if two threads opened a connection at the
same time. We used a mutex around SSL_CTX_* calls, but that was not
enough, e.g. if one thread SSL_CTX_load_verify_locations() with one
path, and another thread set it with a different path, before the first
thread got to establish the connection.
2. Opening two different connections, with different sslrootcert settings,
seemed to fail outright with "SSL error: block type is not 01". Not sure
why.
3. We created the SSL object, before calling SSL_CTX_load_verify_locations
and SSL_CTX_use_certificate_chain_file on the SSL context. That was
wrong, because the options set on the SSL context are propagated to the
SSL object, when the SSL object is created. If they are set after the
SSL object has already been created, they won't take effect until the
next connection. (This is bug #14329)
At least some of these could've been fixed while still using a shared
context, but it would've been more complicated and error-prone. To keep
things simple, let's just use a separate SSL context for each connection,
and accept the overhead.
Backpatch to all supported versions.
Report, analysis and test case by Kacper Zuk.
Discussion: <20160920101051.1355.79453@wrigleys.postgresql.org>
This makes the -? and -V options work consistently with other binaries.
--help and --version are now only recognized as the first option, i.e.
"ecpg --foobar --help" no longer prints the help, but that's consistent
with most of our other binaries, too.
Backpatch to all supported versions.
Haribabu Kommi
Discussion: <CAJrrPGfnRXvmCzxq6Dy=stAWebfNHxiL+Y_z7uqksZUCkW_waQ@mail.gmail.com>
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to 9.5 and 9.6, per popular demand. The file structure was
somewhat different in earlier branches, so I didn't bother to go further
than that. In back-branches, we still support OpenSSL 0.9.7 and above.
OpenSSL 0.9.6 should still work too, but I didn't test it. In master, we
only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
This has been requested a few times, but the use-case for it was never
entirely clear. The reason for adding it now is that transmission of
error reports from parallel workers fails when NLS is active, because
pq_parse_errornotice() wrongly assumes that the existing severity field
is nonlocalized. There are other ways we could have fixed that, but the
other options were basically kluges, whereas this way provides something
that's at least arguably a useful feature along with the bug fix.
Per report from Jakob Egger. Back-patch into 9.6, because otherwise
parallel query is essentially unusable in non-English locales. The
problem exists in 9.5 as well, but we don't want to risk changing
on-the-wire behavior in 9.5 (even though the possibility of new error
fields is specifically called out in the protocol document). It may
be sufficient to leave the issue unfixed in 9.5, given the very limited
usefulness of pq_parse_errornotice in that version.
Discussion: <A88E0006-13CB-49C6-95CC-1A77D717213C@eggerapps.at>
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Beginning with the next development cycle, PG servers will report two-part
not three-part version numbers. Fix libpq so that it will compute the
correct numeric representation of such server versions for reporting by
PQserverVersion(). It's desirable to get this into the field and
back-patched ASAP, so that older clients are more likely to understand the
new server version numbering by the time any such servers are in the wild.
(The results with an old client would probably not be catastrophic anyway
for a released server; for example "10.1" would be interpreted as 100100
which would be wrong in detail but would not likely cause an old client to
misbehave badly. But "10devel" or "10beta1" would result in sversion==0
which at best would result in disabling all use of modern features.)
Extracted from a patch by Peter Eisentraut; comments added by me
Patch: <802ec140-635d-ad86-5fdf-d3af0e260c22@2ndquadrant.com>
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
Apparently, at least some versions of Microsoft's shell fail on variable
assignments that have leading whitespace. This instance, introduced in
commit 680513ab7, managed to escape notice for awhile because it's only
invoked if building with OpenSSL. Per bug #14185 from Torben Dannhauer.
Report: <20160613140119.5798.78501@wrigleys.postgresql.org>
NetBSD has seen fit to invent a libc function named strtoi(), which
conflicts with the long-established static functions of the same name in
datetime.c and ecpg's interval.c. While muttering darkly about intrusions
on application namespace, we'll rename our functions to avoid the conflict.
Back-patch to all supported branches, since this would affect attempts
to build any of them on recent NetBSD.
Thomas Munro
In commit b0e40d1893, I should have just
removed the /D switch defining WIN64. The reason the code worked before
is that all Windows64 compilers automatically predefine _WIN64. Perhaps
at one time we had code that depended on WIN64 being defined, but it's
long gone, and we should not encourage any reappearance. Per discussion
with Christian Ullrich.
Everyplace else thinks it's _WIN64, so make these places fall in line.
The pg_regress.c usage is not going to result in any change in behavior,
only suppressing (or not) a compiler warning about downcasting HANDLEs.
So there seems no need for back-patching there.
The libpq/win32.mak usage might represent an actual bug, if anyone were
using this script to build for Windows64, which perhaps nobody is.
Given the lack of field complaints, no back-patch here either.
pg_regress.c problem found by Christian Ullrich, the other by me.
OpenSSL has an unfortunate tendency to mix per-session state error
handling with per-thread error handling. This can cause problems when
programs that link to libpq with OpenSSL enabled have some other use of
OpenSSL; without care, one caller of OpenSSL may cause problems for the
other caller. Backend code might similarly be affected, for example
when a third party extension independently uses OpenSSL without taking
the appropriate precautions.
To fix, don't trust other users of OpenSSL to clear the per-thread error
queue. Instead, clear the entire per-thread queue ahead of certain I/O
operations when it appears that there might be trouble (these I/O
operations mostly need to call SSL_get_error() to check for success,
which relies on the queue being empty). This is slightly aggressive,
but it's pretty clear that the other callers have a very dubious claim
to ownership of the per-thread queue. Do this is both frontend and
backend code.
Finally, be more careful about clearing our own error queue, so as to
not cause these problems ourself. It's possibly that control previously
did not always reach SSLerrmessage(), where ERR_get_error() was supposed
to be called to clear the queue's earliest code. Make sure
ERR_get_error() is always called, so as to spare other users of OpenSSL
the possibility of similar problems caused by libpq (as opposed to
problems caused by a third party OpenSSL library like PHP's OpenSSL
extension). Again, do this is both frontend and backend code.
See bug #12799 and https://bugs.php.net/bug.php?id=68276
Based on patches by Dave Vitek and Peter Eisentraut.
From: Peter Geoghegan <pg@bowt.ie>
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds support in libpq for regenerating the error message for
an existing error PGresult at any desired verbosity level. This is almost
just a matter of refactoring the existing code into a subroutine, but there
is one bit of possibly-needed information that was not getting put into
PGresults: the text of the last query sent to the server. We must add that
string to the contents of an error PGresult. But we only need to save it
if it might be used, which with the existing error-formatting code only
happens if there is a PG_DIAG_STATEMENT_POSITION error field, which is
probably pretty rare for errors in production situations. So really the
overhead when the feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
When getParamDescriptions was changed to handle out-of-memory better
by cribbing error recovery logic from getRowDescriptions/getAnotherTuple,
somebody omitted to copy the stanza about checking for excess data in
the message. But you need to do that, since continue'ing out of the
switch in pqParseInput3 means no such check gets applied there anymore.
Noted while looking at Michael Paquier's patch that made yet another
copy of this advance_and_error logic.
(This whole business desperately needs refactoring, because I sure don't
want to see a dozen copies of this code, but that's where we seem to be
headed. What's more, the "suspend parsing on EOF return" convention is a
holdover from protocol 2 and shouldn't exist at all in protocol 3, because
we don't process partial messages anymore. But for now, just fix the
obvious bug.)
Also, fix some wrong/missing comments about what the API spec is
for these three functions.
This doesn't seem worthy of back-patching, even though it's a bug;
the case shouldn't ever arise in the field.
Whenever this function is used with the FORMAT_MESSAGE_FROM_SYSTEM flag,
it's good practice to include FORMAT_MESSAGE_IGNORE_INSERTS as well.
Otherwise, if the message contains any %n insertion markers, the function
will try to fetch argument strings to substitute --- which we are not
passing, possibly leading to a crash. This is exactly analogous to the
rule about not giving printf() a format string you're not in control of.
Noted and patched by Christian Ullrich.
Back-patch to all supported branches.
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
Now that we know about the %top{} trick, we can revert to building flex
lexers as separate .o files. This is worth doing for a couple of reasons
besides sheer cleanliness. We can narrow the scope of the -Wno-error flag
that's forced on scan.c. Also, since these grammar and lexer files are
so large, splitting them into separate build targets should have some
advantages in build speed, particularly in parallel or ccache'd builds.
We have quite a few other .l files that could be changed likewise, but the
above arguments don't apply to them, so the benefit of fixing them seems
pretty minimal. Leave the rest for some other day.
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
