The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
Instead of dumping them as CREATE TABLE ... OF, dump them as normal
tables with the usual special processing for dropped columns, and then
attach them to the type afterward, using ALTER TABLE ... OF. This is
analogous to the existing handling of inherited tables.
This code was accidentally part of the patch, it's only
needed for the code that's for 9.2. Not needing the timeline
also removes the need to call IDENTIFY_SYSTEM.
Noted by Peter E.
"People's Republic of China" locale on Windows was causing initdb to fail.
This fixes bug #5818 reported by yulei. On master, this makes the mapping
of "People's Republic of China" to just "China" obsolete. In 9.0 and 8.4,
just fix the escaping. Earlier versions didn't have locale names in bki
file.
In \d, be more careful to print collation only if it's not the default for
the column's data type. Avoid assuming that the name "default" is magic.
Fix \d on a composite type so that it will print per-column collations.
It's no longer the case that a composite type cannot have modifiers.
(In consequence, the expected outputs for composite-type regression tests
change.)
Fix \dD so that it will print collation for a domain, again only if it's
not the same as the base type's collation.
apostrophes or dots. There isn't much hope of Microsoft fixing it any time
soon, it's been like that for ages, so we better work around it. So, map a
few common Windows locale names known to cause problems to aliases that work.
server-encoding, fall back to UTF-8. It happens at least with the Chinese
locale, which implies BIG5. This is safe, because on Windows all locales
are compatible with UTF-8.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
"Unusable" collations are those not matching the current database's
encoding. The former behavior inconsistently showed such collations
some of the time, depending on the details of the pattern argument.
Per discussion, the original behavior seems too noisy. But if things
are so broken that none of the locales reported by "locale -a" are usable,
that's probably worth warning about.
The original coding supposed that a dump TOC file could never contain lines
longer than 1K. The folly of that was exposed by a recent report from
Per-Olov Esgard. We only really need to see the first dozen or two bytes
of each line, since we're just trying to read off the numeric ID at the
start of the line; so there's no need for a particularly huge buffer.
What there is a need for is logic to not process continuation bufferloads.
Back-patch to all supported branches, since it's always been like this.
This is needed only in 9.1 because only 9.0 had this and no one is
upgrading from a 9.0 beta to 9.0 anymore. We basically don't backpatch
9.0 beta fixes at this point.
While putting such entries into pg_collation is harmless (since backends
will ignore entries that don't match the database encoding), it's also
useless.
Install just one instance of the "C" and "POSIX" collations into
pg_collation, rather than one per encoding. Make these instances exist
and do something useful even in machines without locale_t support: to wit,
it's now possible to force comparisons and case-folding functions to use C
locale in an otherwise non-C database, whether or not the platform has
support for using any additional collations.
Fix up severely broken upper/lower/initcap functions, too: the C/POSIX
fastpath now does what it is supposed to, and non-default collations are
handled correctly in single-byte database encodings.
Merge the two separate collation hashtables that were being maintained in
pg_locale.c, and be more wary of the possibility that we fail partway
through filling a cache entry.
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
The last version in which these options were documented is now EOL, so
it's time to get rid of them for real. We now use GNU-style long
options instead.
This was required in pre-8.4 versions to allow the specification of
"ident sameuser", but sameuser is no longer required. It could be extended
to allow all parameters in the future, but should then apply to all
methods and not just ident.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
Including collation in the behavior of that function promotes a world view
we do not want. Moreover, it was producing the wrong behavior for pg_dump
anyway: what we want is to dump a COLLATE clause on attributes whose
attcollation is different from the underlying type, and likewise for
domains, and the function cannot do that for us. Doing it the hard way
in pg_dump is a bit more tedious but produces more correct output.
In passing, fix initdb so that the initial entry in pg_collation is
properly pinned. It was droppable before :-(
In createlang this is a one-line change. In droplang there's a whole
lot of cruft that can be discarded since the extension mechanism now
manages removal of the language's support functions.
Also, add deprecation notices to these two programs' reference pages,
since per discussion we may toss them overboard altogether in a release
or two.
This mostly just involves creating control, install, and
update-from-unpackaged scripts for them. However, I had to adjust plperl
and plpython to not share the same support functions between variants,
because we can't put the same function into multiple extensions.
catversion bump forced due to new contents of pg_pltemplate, and because
initdb now installs plpgsql as an extension not a bare language.
Add support for regression testing these as extensions not bare
languages.
Fix a couple of other issues that popped up while testing this: my initial
hack at pg_dump binary-upgrade support didn't work right, and we don't want
an extra schema permissions test after all.
Documentation changes still to come, but I'm committing now to see
whether the MSVC build scripts need work (likely they do).
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
Instead of manually maintaining the "implementation of XXX operator"
comments in pg_proc.h, delete all those entries and let initdb create
them via a join. To let initdb figure out which name to use when there
is a conflict, change the comments for deprecated operators to say they
are deprecated --- which seems like a good thing to do anyway.
Historically, we've not had separate comments for built-in pg_operator
entries, but relied on the comments for the underlying functions. The
trouble with this approach is that there isn't much of anything to suggest
to users that they'd be better off using the operators instead. So, move
all the relevant comments into pg_operator, and give each underlying
function a comment that just says "implementation of XXX operator".
There are only about half a dozen cases where it seems reasonable to use
the underlying function interchangeably with the operator; in these cases
I left the same comment in place on the function as on the operator.
While at it, establish a policy that every built-in function and operator
entry should have a comment: there are now queries in the opr_sanity
regression test that will complain if one doesn't. This only required
adding a dozen or two more entries than would have been there anyway.
I also spent some time trying to eliminate gratuitous inconsistencies in
the style of the comments, though it's hopeless to suppose that more won't
creep in soon enough.
Per my proposal of 2010-10-15.
- ALTER FOREIGN DATA WRAPPER with HANDLER
- ALTER TABLE VALIDATE CONSTRAINT
- ALTER TYPE ADD VALUE
- COPY with ENCODING and FORCE NOT NULL
- CREATE FOREIGN DATA WRAPPER with HANDLER
- CREATE TRIGGER ... INSTEAD OF
Add a new libpq connection option client_encoding (which includes the
existing PGCLIENTENCODING environment variable), which besides an
encoding name accepts a special value "auto" that tries to determine
the encoding from the locale in the client's environment, using the
mechanisms that have been in use in initdb.
psql sets this new connection option to "auto" when running from a
terminal and not overridden by setting PGCLIENTENCODING.
original code by Heikki Linnakangas, with subsequent contributions by
Jaime Casanova, Peter Eisentraut, Stephen Frost, Ibrar Ahmed
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
The previous coding would try to process all SECTION_NONE items in the
initial sequential-restore pass, which failed if they were dependencies of
not-yet-restored items. Fix by postponing such items into the parallel
processing pass once we have skipped any non-PRE_DATA item.
Back-patch into 9.0; the original parallel-restore coding in 8.4 did not
have this bug, so no need to change it.
Report and diagnosis by Arnd Hannemann.
Normally, pg_dump summarily excludes functions in pg_catalog from
consideration. However, some extensions may create functions in pg_catalog
(adminpack already does that, and extensions for procedural languages will
likely do it too). In binary-upgrade mode, we have to dump such functions,
or the extension will be incomplete after upgrading. Per experimentation
with adminpack.
The original design of pg_available_extensions did not consider the
possibility of version-specific control files. Split it into two views:
pg_available_extensions shows information that is generic about an
extension, while pg_available_extension_versions shows all available
versions together with information that could be version-dependent.
Also, add an SRF pg_extension_update_paths() to assist in checking that
a collection of update scripts provide sane update path sequences.
- collowner field
- CREATE COLLATION
- ALTER COLLATION
- DROP COLLATION
- COMMENT ON COLLATION
- integration with extensions
- pg_dump support for the above
- dependency management
- psql tab completion
- psql \dO command
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
This follows my proposal of yesterday, namely that we try to recreate the
previous state of the extension exactly, instead of allowing CREATE
EXTENSION to run a SQL script that might create some entirely-incompatible
on-disk state. In --binary-upgrade mode, pg_dump won't issue CREATE
EXTENSION at all, but instead uses a kluge function provided by
pg_upgrade_support to recreate the pg_extension row (and extension-level
pg_depend entries) without creating any member objects. The member objects
are then restored in the same way as if they weren't members, in particular
using pg_upgrade's normal hacks to preserve OIDs that need to be preserved.
Then, for each member object, ALTER EXTENSION ADD is issued to recreate the
pg_depend entry that marks it as an extension member.
In passing, fix breakage in pg_upgrade's enum-type support: somebody didn't
fix it when the noise word VALUE got added to ALTER TYPE ADD. Also,
rationalize parsetree representation of COMMENT ON DOMAIN and fix
get_object_address() to allow OBJECT_DOMAIN.
My original idea of doing extension member identification during
getDependencies() didn't work correctly: we have to mark member tables as
not-to-be-dumped rather earlier than that, else their subsidiary objects
like indexes get dumped anyway. Rearrange code to mark them early enough.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
FK constraints that are marked NOT VALID may later be VALIDATED, which uses an
ShareUpdateExclusiveLock on constraint table and RowShareLock on referenced
table. Significantly reduces lock strength and duration when adding FKs.
New state visible from psql.
Simon Riggs, with reviews from Marko Tiikkaja and Robert Haas
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Add the current xlog insert location to the response of
IDENTIFY_SYSTEM, and adds result sets containing start
and stop location of backups to BASE_BACKUP responses.
When included, this makes the base backup a complete working
"clone" of the initial database, ready to have a postmaster
started against it without the need to set up any log archiving
or similar.
Magnus Hagander, reviewed by Fujii Masao and Heikki Linnakangas
The target of sscanf with a %o format had better be of integer width,
but "mode_t" conceivably isn't that. Another compiler warning seen
only on some platforms; this one I think is potentially a real bug
and not just a warning.
This tool makes it possible to do the pg_start_backup/
copy files/pg_stop_backup step in a single command.
There are still some steps to be done before this is a
complete backup solution, such as the ability to stream
the required WAL logs, but it's still usable, and
could do with some buildfarm coverage.
In passing, make the checkpoint request optionally
fast instead of hardcoding it.
Magnus Hagander, reviewed by Fujii Masao and Dimitri Fontaine
It appears that gcc 4.5 can issue such warnings for whole structs, not
just scalar variables as in the past. Refactor some pg_dump code slightly
so that the OutputContext local variables are always initialized, even
if they won't be used. It's cheap enough to not be worth worrying about.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
which is stored in pg_largeobject_metadata.
No backpatch to 9.0 because you can't migrate from 9.0 to 9.0 with the
same catversion (because of tablespace conflict), and a pre-9.0
migration to 9.0 has not large object permissions to migrate.
Toast tables have identical pg_class.oid and pg_class.relfilenode, but
for clarity it is good to preserve the pg_class.oid.
Update comments regarding what is preserved, and do some
variable/function renaming for clarity.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
Allow INSERT INTO, UPDATE, and DELETE FROM to be completed with
either the name of a table (as before) or the name of a view with
an appropriate INSTEAD OF rule.
Along the way, allow CREATE TRIGGER to be completed with INSTEAD OF,
as well as BEFORE and AFTER.
David Fetter, reviewed by Itagaki Takahiro
mkdir_p and check_data_dir will be useful in CREATE TABLESPACE, since we
have agreed that that command should handle subdirectory creation just like
initdb creates the PGDATA directory. Push them into src/port/ so that they
are available to both initdb and the backend. Rename to pg_mkdir_p and
pg_check_dir, just to be on the safe side. Add FreeBSD's copyright notice
to pgmkdirp.c, since that's where the code came from originally (this
really should have been in initdb.c). Very marginal code/comment cleanup.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
With hundreds of thousands of TOC entries, the repeated searches in
reduce_dependencies() become the dominant cost. Get rid of that searching
by constructing reverse-dependency lists, which we can do in O(N) time
during the fix_dependencies() preprocessing. I chose to store the reverse
dependencies as DumpId arrays for consistency with the forward-dependency
representation, and keep the previously-transient tocsByDumpId[] array
around to locate actual TOC entry structs quickly from dump IDs.
While this fixes the slow case reported by Vlad Arkhipov, there is still
a potential for O(N^2) behavior with sufficiently many tables:
fix_dependencies itself, as well as mark_create_done and
inhibit_data_for_failed_table, are doing repeated searches to deal with
table-to-table-data dependencies. Possibly this work could be extended
to deal with that, although the latter two functions are also used in
non-parallel restore where we currently don't run fix_dependencies.
Another TODO is that we fail to parallelize restore of multiple blobs
at all. This appears to require changes in the archive format to fix.
Back-patch to 9.0 where the problem was reported. 8.4 has potential issues
as well; but since it doesn't create a separate TOC entry for each blob,
it's at much less risk of having enough TOC entries to cause real problems.
to make it easier to reuse that code. There is no user-visible changes.
This is in preparation for the patch to add a new archive format, a directory,
to perform a custom-like dump but with each table being dumped to a separate
file (that in turn is a prerequisite for parallel pg_dump). This also makes it
easier to add new compression methods in the future, and makes the
pg_backup_custom.c code easier to read, when the compression-related code is
factored out.
Joachim Wieland, with heavy editorialization by me.
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.
Dimitri Fontaine, with assorted corrections and other kibitzing.
status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
\dn without "S" now hides all pg_XXX schemas as well as information_schema.
Thus, in a bare database you'll only see "public". ("public" is considered
a user schema, not a system schema, mainly because it's droppable.)
Per discussion back in late September.
Per C standard, these are semantically the same thing; but saying NULL
when you mean NULL is good for readability.
Marti Raudsepp, per results of INRIA's Coccinelle.
The previous wording might have suggested that \du only showed login roles
and \dg only group roles, but that is no longer the case.
proposed by Josh Kupershmidt
Original patch failed to include new exclusive states in a switch that
needed to include them; and also was guilty of very fuzzy thinking
about how to handle error cases. Per bug #5729 from Alan Choi.
- Avoid closing stdin, since we didn't open it. Previously multiple
inclusions of stdin would be terminated with a single quit, now a separate
quit is needed for each invocation. Previous behavior also accessed stdin
after it was fclose()d, which is undefined behavior per ANSI C.
- Properly restore pset.inputfile, since the caller expects to be able
to free that memory.
Marti Raudsepp
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
Completion is supported in the context of \set and when interpolating
a variable value using :foo etc.
In passing, fix some places in tab-complete.c that weren't following
project style for comment formatting.
Pavel Stehule, reviewed by Itagaki Takahiro
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
servers. AFAICT it's harmless at the moment because nothing can depend on
either, but as soon as we introduce an object type with such dependencies,
tableoid needs to be set or pg_dump will fail to interpret the dependencies
correctly. In theory, I guess the uninitialized garbage in tableoid could
cause the object to be mistaken for some other object with same OID as well.
an online backup instead of performing one. pg_ctl can detect that by
checking if recovery.conf exists.
Backup label file is renamed away early in recovery, so the window where
backup label exists during recovery is normally very small, but you can run
into it e.g if restore_command is set incorrectly and the startup process
never finds even the first WAL segment containing the checkpoint record to
start recovery from.
Fujii Masao with comments by me.
The original coding tended to break down in the face of modified restore
orders, as shown in bug #5626 from Albert Ullrich, because it would flip over
into parallel-restore operation too soon. That causes problems because we
don't have sufficient dependency information in dump archives to allow safe
parallel processing of SECTION_PRE_DATA items. Even if we did, it's probably
undesirable to allow that to override the commanded restore order.
To fix the problem of omitted items causing unexpected changes in restore
order, tweak SortTocFromFile so that omitted items end up at the head of
the list not the tail. This ensures that they'll be examined and their
dependencies will be marked satisfied before we get to any interesting
items.
In HEAD and 9.0, we can easily change restore_toc_entries_parallel so that
all SECTION_PRE_DATA items are guaranteed to be processed in the initial
serial-restore loop, and hence in commanded order. Only DATA and POST_DATA
items are candidates for parallel processing. For them there might be
variations from the commanded order because of parallelism, but we should
do it in a safe order thanks to dependencies.
In 8.4 it's much harder to make such a guarantee. I settled for not
letting the initial loop break out into parallel processing mode if
it sees a DATA/POST_DATA item that's not to be restored; this at least
prevents a non-restorable item from causing premature exit from the loop.
This means that 8.4 will be more likely to fail given a badly-ordered -L
list than 9.x, but we don't really promise any such thing will work anyway.
elsewhere.
Similarly rename the version in mbprint.c, not because this affects anything
but just to keep the two copies in exact sync. There was some discussion of
having only one copy in src/port/ instead, but this function is so small
and unlikely to change that that seems like overkill.
Slightly editorialized version of a patch by Joseph Adams. (The bug-fix
aspect of his patch was applied separately, and back-patched.)
in particular, propagate a fix in the test to see whether a UTF8 character has
length 4 bytes. This is likely of little real-world consequence because
5-or-more-byte UTF8 sequences are not supported by Postgres nor seen anywhere
in the wild, but still we may as well get it right. Problem found by Joseph
Adams.
Bug is aboriginal, so back-patch all the way.
and input file name, per bug #5617 from Leo Shklovskii. Rearrange the
corresponding code in pg_dump and pg_dumpall so that all three programs
handle this in a consistent, straightforward fashion.
Back-patch to 9.0, but no further. Although this is certainly a bug, it's
possible that people have scripts that will be broken by the added error
check, so it seems better not to change the behavior in stable branches.
and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
the parameters of \connect, and fix oversight of not enabling translation
of the messages. Also, adjust \connect's similar messages to match, and
deal with 8.2-era violation of basic translatability guidelines there.
