pg_base64_enc_len() and its clones overestimated the output
length by up to 2 bytes, as a result of sloppy thinking about
where to divide. No callers require a precise estimate, so
this has no consequences worse than palloc'ing a byte or two
more than necessary. We might as well get it right though.
This bug is very ancient, dating to commit 79d78bb26 which
added encode.c. (The other instances were presumably copied
from there.) Still, it doesn't quite seem worth back-patching.
Oleg Tselebrovskiy
Discussion: https://postgr.es/m/f94da55286a63022150bc266afdab754@postgrespro.ru
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
Fixes memory error in cases where the length of the language name
returned by uloc_getLanguage() is exactly ULOC_LANG_CAPACITY, in which
case the status is set to U_STRING_NOT_TERMINATED_WARNING.
Also check in call sites for other ICU functions that are expected to
return a C string to be safe (no bug is known at these other call
sites).
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/2098874d-c111-41e4-9063-30bcf135226b@gmail.com
28e626bde0 added the concept of IOOps but neglected to include writeback
operations. ac8d53dae5 added time spent doing these I/O operations. Without
counting writeback, checkpointer write time in the log often differed
substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK
and track writeback in pg_stat_io.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
Commit a73952b795 (new in 16) required default values in guc_table.c
and C variable initializers to match. This one only matched when
XLOG_BLCKSZ == 8kB. Fix by using the same expression in both places
with a new DEFAULT_XXX macro, as done for other GUCs.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGLNmLV=VrT==5MqnbARgx2ifRSFtdd8ofdfrdSLL3yv5A@mail.gmail.com
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
RI_Initial_Check was setting up a list of RTEPermissionInfo for
ExecCheckPermissions() wrong, and the problem is subtle enough that it
doesn't have any immediate effect in core code. However, if an
extension is using the ExecutorCheckPerms_hook, then it would get the
wrong parameters and perhaps arrive at a wrong conclusion, or outright
malfunction. Fix by constructing that list and the RTE list more
honestly.
We also add an assertion check to verify that these lists match. This
new assertion would have caught this bug.
Co-authored-by: Олег Целебровский (Oleg Tselebrovskii) <o.tselebrovskiy@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/3722b7a2cbe27a1796ee40824bd86dd1@postgrespro.ru
These functions incautiously fetched the array's first lower bound
even when the array is zero-dimensional, thus fetching the word
after the allocated array space. While almost always harmless,
with very bad luck this could result in SIGSEGV. Fix by adding
an early exit for empty input.
Per bug #17920 from Alexander Lakhin.
Discussion: https://postgr.es/m/17920-f7c228c627b6d02e%40postgresql.org
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e97. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Commit 6df7a9698b accidentally included two identical prototypes for
default_multirange_selectivi() and commit 086cf1458c added a break;
statement where one was already present, thus duplicating it. While
there is no bug caused by this, fix by removing the duplicated lines
as they provide no value.
Backpatch the fix for duplicate prototypes to v14 and the duplicate
break statement fix to all supported branches to avoid backpatching
hazards due to the removal.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Discussion: https://postgr.es/m/0e69cb60-0176-f6d0-7e15-6478b7d85724@postgrespro.ru
a9c70b46 added the statistics view pg_stat_io which contained columns
"io_context" and "io_object". Given that the columns are in the
pg_stat_io view, the "io" prefix is somewhat redundant, so remove it.
The code variables referring to these fields are kept unchanged so as
they can keep their context about I/O.
Bump catalog version.
Author: Melanie Plageman
Reviewed-by: Kyotaro Horiguchi, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAAKRu_aAQoJWrvT2BYYQvJChFKra_O-5ra3jhzKJZqWsTR1CPQ@mail.gmail.com
Old versions of Solaris and illumos had buffer overrun bugs in their
strxfrm() implementations. The bugs were fixed more than a decade ago
and the relevant releases are long out of vendor support. It's time to
remove the defense added by commit be8b06c3.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA+hUKGJ-ZPJwKHVLbqye92-ZXeLoCHu5wJL6L6HhNP7FkJ=meA@mail.gmail.com
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
This GUC was renamed to debug_parallel_query in 5352ca22e. That commit
added an entry into map_old_guc_names[] to allow the old name still to
work. That was done to allow a transition time where the buildfarm
configs could be swapped over to use debug_parallel_query instead. That
work is now complete.
Here we remove the old name with the intention of breaking any user code
which is using force_parallel_query. As mentioned in the commit message
for 5352ca22e, it appeared many users were misled into thinking that
setting this GUC was doing something useful for them to make queries run
more quickly.
Discussion: https://postgr.es/m/CAApHDvoR7EOz7Tvyzrd18FO-Dw2Cp4Uyq25TEWguK+XyCJtzOw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Previously, regex_t objects' memory was managed with malloc() and free()
directly. Switch to palloc()-based memory management instead.
Advantages:
* memory used by cached regexes is now visible with MemoryContext
observability tools
* cleanup can be done automatically in certain failure modes
(something that later commits will take advantage of)
* cleanup can be done in bulk
On the downside, there may be more fragmentation (wasted memory) due to
per-regex MemoryContext objects. This is a problem shared with other
cached objects in PostgreSQL and can probably be improved with later
tuning.
Thanks to Noah Misch for suggesting this general approach, which
unblocks later work on interrupts.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
a9c70b46db and 8aaa04b32S added counting of IO operations to a new view,
pg_stat_io. Now, add IO timing for reads, writes, extends, and fsyncs to
pg_stat_io as well.
This combines the tracking for pgBufferUsage with the tracking for pg_stat_io
into a new function pgstat_count_io_op_time(). This should make it a bit
easier to avoid the somewhat costly instr_time conversion done for
pgBufferUsage.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ay5iKmnbXZ3DsauViF3eMxu4m1oNnJXqV_HyqYeg55Ww%40mail.gmail.com
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
