pg_dump is oblivious to this kind of dependency, so they're lost on
dump/restores (and pg_upgrade). Have pg_dump emit ALTER lines so that
they're preserved. Add some pg_dump tests for the whole thing, also.
Reviewed-by: Tom Lane (offlist)
Reviewed-by: Ibrar Ahmed
Reviewed-by: Ahsan Hadi (who also reviewed commit 899a04f5ed)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
When a partitioned table is added to a publication, changes of all of
its partitions (current or future) are published via that publication.
This change only affects which tables a publication considers as its
members. The receiving side still sees the data coming from the
individual leaf partitions. So existing restrictions that partition
hierarchies can only be replicated one-to-one are not changed by this.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
Previously, event triggers were restored just after regular triggers
(and FK constraints, which are basically triggers). This is risky
since an event trigger, once installed, could interfere with subsequent
restore commands. Worse, because event triggers don't have any
particular dependencies on any post-data objects, a parallel restore
would consider them eligible to be restored the moment the post-data
phase starts, allowing them to also interfere with restoration of a
whole bunch of objects that would have been restored before them in
a serial restore. There's no way to completely remove the risk of a
misguided event trigger breaking the restore, since if nothing else
it could break other event triggers. But we can certainly push them
to later in the process to minimize the hazard.
To fix, tweak the RestorePass mechanism introduced by commit 3eb9a5e7c
so that event triggers are handled as part of the post-ACL processing
pass (renaming the "REFRESH" pass to "POST_ACL" to reflect its more
general use). This will cause them to restore after everything except
matview refreshes, which seems OK since matview refreshes really ought
to run in the post-restore state of the database. In a parallel
restore, event triggers and matview refreshes might be intermixed,
but that seems all right as well.
Also update the code and comments in pg_dump_sort.c so that its idea
of how things are sorted agrees with what actually happens due to
the RestorePass mechanism. This is mostly cosmetic: it'll affect the
order of objects in a dump's TOC, but not the actual restore order.
But not changing that would be quite confusing to somebody reading
the code.
Back-patch to all supported branches.
Fabrízio de Royes Mello, tweaked a bit by me
Discussion: https://postgr.es/m/CAFcNs+ow1hmFox8P--3GSdtwz-S3Binb6ZmoP6Vk+Xg=K6eZNA@mail.gmail.com
A long time ago, it was necessary to declare datatype I/O functions,
triggers, and language handler support functions in a very type-unsafe
way involving a single pseudo-type "opaque". We got rid of those
conventions in 7.3, but there was still support in various places to
automatically convert such functions to the modern declaration style,
to be able to transparently re-load dumps from pre-7.3 servers.
It seems unnecessary to continue to support that anymore, so take out
the hacks; whereupon the "opaque" pseudo-type itself is no longer
needed and can be dropped.
This is part of a group of patches removing various server-side kluges
for transparently upgrading pre-8.0 dump files. Since we've had few
complaints about dropping pg_dump's support for dumping from pre-8.0
servers (commit 64f3524e2), it seems okay to now remove these kluges.
Discussion: https://postgr.es/m/4110.1583255415@sss.pgh.pa.us
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
Invent the concept of a B-Tree equalimage ("equality implies image
equality") support function, registered as support function 4. This
indicates whether it is safe (or not safe) to apply optimizations that
assume that any two datums considered equal by an operator class's order
method must be interchangeable without any loss of semantic information.
This is static information about an operator class and a collation.
Register an equalimage routine for almost all of the existing B-Tree
opclasses. We only need two trivial routines for all of the opclasses
that are included with the core distribution. There is one routine for
opclasses that index non-collatable types (which returns 'true'
unconditionally), plus another routine for collatable types (which
returns 'true' when the collation is a deterministic collation).
This patch is infrastructure for an upcoming patch that adds B-Tree
deduplication.
Author: Peter Geoghegan, Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
This was unaccountably omitted in the original RLS patch.
The SQL syntax is basically the same as for comments on triggers,
so crib code from dumpTrigger().
Per report from Marc Munro. Back-patch to all supported branches.
Discussion: https://postgr.es/m/1581889298.18009.15.camel@bloodnok.com
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
If we failed to fork a worker process, or create a communication pipe
for one, WaitForTerminatingWorkers would suffer an assertion failure
if assert-enabled, otherwise crash or go into an infinite loop. This
was a consequence of not accounting for the startup condition where
we've not yet forked all the workers.
The original bug was that ParallelBackupStart would set workerStatus to
WRKR_IDLE before it had successfully forked a worker. I made things
worse in commit b7b8cc0cf by not understanding the undocumented fact
that the WRKR_TERMINATED state was also meant to represent the case
where a worker hadn't been started yet: I changed enum T_WorkerStatus
so that *all* the worker slots were initially in WRKR_IDLE state. But
this wasn't any more broken in practice, since even one slot in the
wrong state would keep WaitForTerminatingWorkers from terminating.
In v10 and later, introduce an explicit T_WorkerStatus value for
worker-not-started, in hopes of preventing future oversights of the
same ilk. Before that, just document that WRKR_TERMINATED is supposed
to cover that case (partly because it wasn't actively broken, and
partly because the enum is exposed outside parallel.c in those branches,
so there's microscopically more risk involved in changing it).
In all branches, introduce a WORKER_IS_RUNNING status test macro
to hide which T_WorkerStatus values mean that, and be more careful
not to access ParallelSlot fields till we're sure they're valid.
Per report from Vignesh C, though this is my patch not his.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CALDaNm1Luv-E3sarR+-unz-BjchquHHyfP+YC+2FS2pt_J+wxg@mail.gmail.com
This patch creates a new extension property, "trusted". An extension
that's marked that way in its control file can be installed by a
non-superuser who has the CREATE privilege on the current database,
even if the extension contains objects that normally would have to be
created by a superuser. The objects within the extension will (by
default) be owned by the bootstrap superuser, but the extension itself
will be owned by the calling user. This allows replicating the old
behavior around trusted procedural languages, without all the
special-case logic in CREATE LANGUAGE. We have, however, chosen to
loosen the rules slightly: formerly, only a database owner could take
advantage of the special case that allowed installation of a trusted
language, but now anyone who has CREATE privilege can do so.
Having done that, we can delete the pg_pltemplate catalog, moving the
knowledge it contained into the extension script files for the various
PLs. This ends up being no change at all for the in-core PLs, but it is
a large step forward for external PLs: they can now have the same ease
of installation as core PLs do. The old "trusted PL" behavior was only
available to PLs that had entries in pg_pltemplate, but now any
extension can be marked trusted if appropriate.
This also removes one of the stumbling blocks for our Python 2 -> 3
migration, since the association of "plpythonu" with Python 2 is no
longer hard-wired into pg_pltemplate's initial contents. Exactly where
we go from here on that front remains to be settled, but one problem
is fixed.
Patch by me, reviewed by Peter Eisentraut, Stephen Frost, and others.
Discussion: https://postgr.es/m/5889.1566415762@sss.pgh.pa.us
sigTermHandler() tried to be careful to invoke only operations that
are safe to do in a signal handler. But for some reason we forgot
that exit(3) is not among those, because it calls atexit handlers
that might do various random things. (pg_dump itself installs no
atexit handlers, but e.g. OpenSSL does.) That led to crashes or
lockups when attempting to terminate a parallel dump or restore
via a signal.
Fix by calling _exit() instead.
Per bug #16199 from Raúl Marín. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16199-cb2f121146a96f9b@postgresql.org
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The code only compared two triggers' names and namespaces (the latter
being the owning table's schema). This could result in falling back
to an OID-based sort of similarly-named triggers on different tables.
We prefer to avoid that, so add a comparison of the table names too.
(The sort order is thus table namespace, trigger name, table name,
which is a bit odd, but it doesn't seem worth contorting the code
to work around that.)
Likewise for policy objects, in 9.5 and up.
Complaint and fix by Benjie Gillam. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAMThMzEEt2mvBbPgCaZ1Ap1N-moGn=Edxmadddjq89WG4NpPtQ@mail.gmail.com
When an FK constraint is created, it needs the index on the referenced
table to exist and be valid. When doing parallel pg_restore and the
referenced table was partitioned, this condition can sometimes not be
met, because pg_dump didn't emit sufficient object dependencies to
ensure so; this means that parallel pg_restore would fail in certain
conditions. Fix by having pg_dump make the FK constraint object
dependent on the partition attachment objects for the constraint's
referenced index.
This has been broken since f56f8f8da6, so backpatch to Postgres 12.
Discussion: https://postgr.es/m/20191005224333.GA9738@alvherre.pgsql
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
When building statistics, we need to decide how many rows to sample and
how accurate the resulting statistics should be. Until now, it was not
possible to explicitly define statistics target for extended statistics
objects, the value was always computed from the per-attribute targets
with a fallback to the system-wide default statistics target.
That's a bit inconvenient, as it ties together the statistics target set
for per-column and extended statistics. In some cases it may be useful
to require larger sample / higher accuracy for extended statics (or the
other way around), but with this approach that's not possible.
So this commit introduces a new command, allowing to specify statistics
target for individual extended statistics objects, overriding the value
derived from per-attribute targets (and the system default).
ALTER STATISTICS stat_name SET STATISTICS target_value;
When determining statistics target for an extended statistics object we
first look at this explicitly set value. When this value is -1, we fall
back to the old formula, looking at the per-attribute targets first and
then the system default. This means the behavior is backwards compatible
with older PostgreSQL releases.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20190618213357.vli3i23vpkset2xd@development
Reviewed-by: Kirk Jamison, Dean Rasheed
Clarify in the help output and documentation that -n, -t etc. take a
"pattern" rather than a "schema" or "table" etc. This was especially
confusing now that the new pg_dumpall --exclude-database option was
documented with "pattern" and the others not, even though they all
behave the same.
Discussion: https://www.postgresql.org/message-id/flat/b85f3fa1-b350-38d1-1893-4f7911bd7310%402ndquadrant.com
Previously 'uname -r' on Msys2 reported a kernele release starting with
2. The latest version starts with 3. In commit 1638623f we specifically
looked for one starting with 2. This is now changed to look for any
digit between 2 and 9.
backpatch to release 10.
Commit 07b39083c inserted an unconditional reference to pg_opfamily,
which of course fails on servers predating that catalog. Fortunately,
the case it's trying to solve can't occur on such old servers (AFAIK).
Hence, just skip the additional code when the source predates 8.3.
Per bug #15955 from sly. Back-patch to all supported branches,
like the previous patch.
Discussion: https://postgr.es/m/15955-1daa2e676e903d87@postgresql.org
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15934-58b8c8ab7a09ea15@postgresql.org
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
The last set of scenarios did an initialization of nodes followed by an
extra command to set up the authentication policy with pg_regress
--config-auth. This configuration step can be integrated directly using
the option auth_extra from PostgresNode::init when initializing the
node, saving from one extra command. On Windows, this also restricts
more pg_ident.conf for the SSPI user mapping by removing the entry of
the OS user running the test, which is not needed anyway.
Note that IPC::Run mishandles double quotes, hence the restore user name
is changed to map with that. This was already done in the test as a
later step, but not in a consistent way, causing the switch to use
auth_extra to fail.
Found while reviewing ca129e5.
Discussion: https://postgr.es/m/20190703062024.GD3084@paquier.xyz
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
Up to now, pg_regress --config-auth had a hard-wired assumption
that the target cluster uses the default bootstrap superuser name.
pg_dump's 010_dump_connstr.pl TAP test uses non-default superuser
names, and was klugily getting around the restriction by listing
the desired superuser name as a role to "create". This is pretty
confusing (or at least, it confused me). Let's make it clearer by
allowing --config-auth mode to be told the bootstrap superuser name.
Repurpose the existing --user switch for that, since it has no
other function in --config-auth mode.
Per buildfarm. I don't have an environment at hand in which I can
test this fix, but the buildfarm should soon show if it works.
Discussion: https://postgr.es/m/3142.1561840611@sss.pgh.pa.us
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have on
an existing installation. However, no enforcement mechanism was created,
so it's unsurprising that some new violations have crept in since then.
In fact, a whole new *category* of violations has crept in, to wit we now
also have globally-visible subscription and replication origin names, and
"make installcheck" could very easily clobber user-created objects of
those types. So it's past time to do something about this.
This commit sanitizes the tests enough that they will pass (i.e. not
generate any visible warnings) with the enforcement mechanism I'll add
in the next commit. There are some TAP tests that still trigger the
warnings, but the warnings do not cause test failure. Since these tests
do not actually run against a pre-existing installation, there's no need
to worry whether they could conflict with user-created objects.
The problem with rolenames.sql testing special role names like "user"
is still there, and is dealt with only very cosmetically in this patch
(by hiding the warnings :-(). What we actually need to do to be safe is
to take that test script out of "make installcheck" altogether, but that
seems like material for a separate patch.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
