group clearing mechanism.
Commit 0e141c0fbb introduced initialization of atomic variable in
InitProcess which means that it's not safe to look at it for backends that
aren't currently in use. Fix that by initializing the same during postmaster
startup.
Reported-by: Andres Freund
Author: Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/20181027104138.qmbbelopvy7cw2qv@alap3.anarazel.de
classify_index_clause_usage() is O(N^2) in the number of distinct index
qual clauses it considers, because of its use of a simple search list to
store them. For nearly all queries, that's fine because only a few clauses
will be considered. But Alexander Kuzmenkov reported a machine-generated
query with 80000 (!) index qual clauses, which caused this code to take
forever. Somewhat remarkably, this is the only O(N^2) behavior we now
have for such a query, so let's fix it.
We can get rid of the O(N^2) runtime for cases like this without much
damage to the functionality of choose_bitmap_and() by separating out
paths with "too many" qual or pred clauses, and deeming them to always
be nonredundant with other paths. Then their clauses needn't go into
the search list, so it doesn't get too long, but we don't lose the
ability to consider bitmap AND plans altogether. I set the threshold
for "too many" to be 100 clauses per path, which should be plenty to
ensure no change in planning behavior for normal queries.
There are other things we could do to make this go faster, but it's not
clear that it's worth any additional effort. 80000 qual clauses require
a whole lot of work in many other places, too.
The code's been like this for a long time, so back-patch to all supported
branches. The troublesome query only works back to 9.5 (in 9.4 it fails
with stack overflow in the parser); so I'm not sure that fixing this in
9.4 has any real-world benefit, but perhaps it does.
Discussion: https://postgr.es/m/90c5bdfa-d633-dabe-9889-3cf3e1acd443@postgrespro.ru
This patch fixes several related cases in which pg_shdepend entries were
never made, or were lost, for references to roles appearing in the ACLs of
schemas and/or types. While that did no immediate harm, if a referenced
role were later dropped, the drop would be allowed and would leave a
dangling reference in the object's ACL. That still wasn't a big problem
for normal database usage, but it would cause obscure failures in
subsequent dump/reload or pg_upgrade attempts, taking the form of
attempts to grant privileges to all-numeric role names. (I think I've
seen field reports matching that symptom, but can't find any right now.)
Several cases are fixed here:
1. ALTER DOMAIN SET/DROP DEFAULT would lose the dependencies for any
existing ACL entries for the domain. This case is ancient, dating
back as far as we've had pg_shdepend tracking at all.
2. If a default type privilege applies, CREATE TYPE recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for types in 9.2.
3. If a default schema privilege applies, CREATE SCHEMA recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for schemas in v10
(commit ab89e465c).
Another somewhat-related problem is that when creating a relation
rowtype or implicit array type, TypeCreate would apply any available
default type privileges to that type, which we don't really want
since such an object isn't supposed to have privileges of its own.
(You can't, for example, drop such privileges once they've been added
to an array type.)
ab89e465c is also to blame for a race condition in the regression tests:
privileges.sql transiently installed globally-applicable default
privileges on schemas, which sometimes got absorbed into the ACLs of
schemas created by concurrent test scripts. This should have resulted
in failures when privileges.sql tried to drop the role holding such
privileges; but thanks to the bug fixed here, it instead led to dangling
ACLs in the final state of the regression database. We'd managed not to
notice that, but it became obvious in the wake of commit da906766c, which
allowed the race condition to occur in pg_upgrade tests.
To fix, add a function recordDependencyOnNewAcl to encapsulate what
callers of get_user_default_acl need to do; while the original call
sites got that right via ad-hoc code, none of the later-added ones
have. Also change GenerateTypeDependencies to generate these
dependencies, which requires adding the typacl to its parameter list.
(That might be annoying if there are any extensions calling that
function directly; but if there are, they're most likely buggy in the
same way as the core callers were, so they need work anyway.) While
I was at it, I changed GenerateTypeDependencies to accept most of its
parameters in the form of a Form_pg_type pointer, making its parameter
list a bit less unwieldy and mistake-prone.
The test race condition is fixed just by wrapping the addition and
removal of default privileges into a single transaction, so that that
state is never visible externally. We might eventually prefer to
separate out tests of default privileges into a script that runs by
itself, but that would be a bigger change and would make the tests
run slower overall.
Back-patch relevant parts to all supported branches.
Discussion: https://postgr.es/m/15719.1541725287@sss.pgh.pa.us
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
On Windows, in UTF8 database encoding, what char2wchar() produces is
UTF16 not UTF32, ie, characters above U+FFFF will be represented by
surrogate pairs. t_isdigit() and siblings did not account for this
and failed to provide a large enough result buffer. That in turn
led to bogus "invalid multibyte character for locale" errors, because
contrary to what you might think from char2wchar()'s documentation,
its Windows code path doesn't cope sanely with buffer overflow.
The solution for t_isdigit() and siblings is pretty clear: provide
a 3-wchar_t result buffer not 2.
char2wchar() also needs some work to provide more consistent, and more
accurately documented, buffer overrun behavior. But that's a bigger job
and it doesn't actually have any immediate payoff, so leave it for later.
Per bug #15476 from Kenji Uno, who deserves credit for identifying the
cause of the problem. Back-patch to all active branches.
Discussion: https://postgr.es/m/15476-4314f480acf0f114@postgresql.org
Previously it was possible to create a slot, change wal_level, and
restart, even if the new wal_level was insufficient for the
slot. That's a problem for both logical and physical slots, because
the necessary WAL records are not generated.
This removes a few tests in newer versions that, somewhat
inexplicably, whether restarting with a too low wal_level worked (a
buggy behaviour!).
Reported-By: Joshua D. Drake
Author: Andres Freund
Discussion: https://postgr.es/m/20181029191304.lbsmhshkyymhw22w@alap3.anarazel.de
Backpatch: 9.4-, where replication slots where introduced
spgendscan neglected to pfree all the memory allocated by spgbeginscan.
It's possible to get away with that in most normal queries, since the
memory is allocated in the executor's per-query context which is about
to get deleted anyway; but it causes severe memory leakage during
creation or filling of large exclusion-constraint indexes.
Also, document that amendscan is supposed to free what ambeginscan
allocates. The docs' lack of clarity on that point probably caused this
bug to begin with. (There is discussion of changing that API spec going
forward, but I don't think it'd be appropriate for the back branches.)
Per report from Bruno Wolff. It's been like this since the beginning,
so back-patch to all active branches.
In HEAD, also fix an independent leak caused by commit 2a6368343
(allocating memory during spgrescan instead of spgbeginscan, which
might be all right if it got cleaned up, but it didn't). And do a bit
of code beautification on that commit, too.
Discussion: https://postgr.es/m/20181024012314.GA27428@wolff.to
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
localtime.c's "struct state" is a rather large object, ~23KB. We were
statically allocating one for gmtsub() to use to represent the GMT
timezone, even though that function is not at all heavily used and is
never reached in most backends. Let's malloc it on-demand, instead.
This does pose the question of how to handle a malloc failure, but
there's already a well-defined error report convention here, ie
set errno and return NULL.
We have but one caller of pg_gmtime in HEAD, and two in back branches,
neither of which were troubling to check for error. Make them do so.
The possible errors are sufficiently unlikely (out-of-range timestamp,
and now malloc failure) that I think elog() is adequate.
Back-patch to all supported branches to keep our copies of the IANA
timezone code in sync. This particular change is in a stanza that
already differs from upstream, so it's a wash for maintenance purposes
--- but only as long as we keep the branches the same.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
ProcessUtility can recurse, and indeed can be driven to infinite
recursion, so it ought to have a check_stack_depth() call. This
covers the reported bug (portal trying to execute itself) and a bunch
of other cases that could perhaps arise somewhere.
Per bug #15428 from Malthe Borch. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15428-b3c2915ec470b033@postgresql.org
On a primary, sets of XLOG_RUNNING_XACTS records are generated on a
periodic basis to allow recovery to build the initial state of
transactions for a hot standby. The set of transaction IDs is created
by scanning all the entries in ProcArray. However it happens that its
logic never counted on the fact that two-phase transactions finishing to
prepare can put ProcArray in a state where there are two entries with
the same transaction ID, one for the initial transaction which gets
cleared when prepare finishes, and a second, dummy, entry to track that
the transaction is still running after prepare finishes. This way
ensures a continuous presence of the transaction so as callers of for
example TransactionIdIsInProgress() are always able to see it as alive.
So, if a XLOG_RUNNING_XACTS takes a standby snapshot while a two-phase
transaction finishes to prepare, the record can finish with duplicated
XIDs, which is a state expected by design. If this record gets applied
on a standby to initial its recovery state, then it would simply fail,
so the odds of facing this failure are very low in practice. It would
be tempting to change the generation of XLOG_RUNNING_XACTS so as
duplicates are removed on the source, but this requires to hold on
ProcArrayLock for longer and this would impact all workloads,
particularly those using heavily two-phase transactions.
XLOG_RUNNING_XACTS is also actually used only to initialize the standby
state at recovery, so instead the solution is taken to discard
duplicates when applying the initial snapshot.
Diagnosed-by: Konstantin Knizhnik
Author: Michael Paquier
Discussion: https://postgr.es/m/0c96b653-4696-d4b4-6b5d-78143175d113@postgrespro.ru
Backpatch-through: 9.3
Repeatedly rewriting a mapped catalog table with VACUUM FULL or
CLUSTER could cause logical decoding to fail with:
ERROR, "could not map filenode \"%s\" to relation OID"
To trigger the problem the rewritten catalog had to have live tuples
with toasted columns.
The problem was triggered as during catalog table rewrites the
heap_insert() check that prevents logical decoding information to be
emitted for system catalogs, failed to treat the new heap's toast table
as a system catalog (because the new heap is not recognized as a
catalog table via RelationIsLogicallyLogged()). The relmapper, in
contrast to the normal catalog contents, does not contain historical
information. After a single rewrite of a mapped table the new relation
is known to the relmapper, but if the table is rewritten twice before
logical decoding occurs, the relfilenode cannot be mapped to a
relation anymore. Which then leads us to error out. This only
happens for toast tables, because the main table contents aren't
re-inserted with heap_insert().
The fix is simple, add a new heap_insert() flag that prevents logical
decoding information from being emitted, and accept during decoding
that there might not be tuple data for toast tables.
Unfortunately that does not fix pre-existing logical decoding
errors. Doing so would require not throwing an error when a filenode
cannot be mapped to a relation during decoding, and that seems too
likely to hide bugs. If it's crucial to fix decoding for an existing
slot, temporarily changing the ERROR in ReorderBufferCommit() to a
WARNING appears to be the best fix.
Author: Andres Freund
Discussion: https://postgr.es/m/20180914021046.oi7dm4ra3ot2g2kt@alap3.anarazel.de
Backpatch: 9.4-, where logical decoding was introduced
gcc 6.3 does not whine about this mistake I made in 39808e8868 but
evidently lots of other compilers do, according to Michael Paquier,
Peter Eisentraut, Arthur Zakirov, Tomas Vondra.
Discussion: too many to list
Index DDL cascading on partitioned tables introduced a way for ALTER
TABLE to be called reentrantly. This caused an an important deficiency
in event trigger support to be exposed: on exiting the reentrant call,
the alter table state object was clobbered, causing a crash when the
outer alter table tries to finalize its processing. Fix the crash by
creating a stack of event trigger state objects. There are still ways
to cause things to misbehave (and probably other crashers) with more
elaborate tricks, but at least it now doesn't crash in the obvious
scenario.
Backpatch to 9.5, where DDL deparsing of event triggers was introduced.
Reported-by: Marco Slot
Authors: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CANNhMLCpi+HQ7M36uPfGbJZEQLyTy7XvX=5EFkpR-b1bo0uJew@mail.gmail.com
Previously, a worker process would establish values for these based on
its own start time. In v10 and up, this can trivially be shown to cause
misbehavior of transaction_timestamp(), timestamp_in(), and related
functions which are (perhaps unwisely?) marked parallel-safe. It seems
likely that other behaviors might diverge from what happens in the parent
as well.
It's not as trivial to demonstrate problems in 9.6 or 9.5, but I'm sure
it's still possible, so back-patch to all branches containing parallel
worker infrastructure.
In HEAD only, mark now() and statement_timestamp() as parallel-safe
(other affected functions already were). While in theory we could
still squeeze that change into v11, it doesn't seem important enough
to force a last-minute catversion bump.
Konstantin Knizhnik, whacked around a bit by me
Discussion: https://postgr.es/m/6406dbd2-5d37-4cb6-6eb2-9c44172c7e7c@postgrespro.ru
Historically we forbade datatype-specific comparison functions from
returning INT_MIN, so that it would be safe to invert the sort order
just by negating the comparison result. However, this was never
really safe for comparison functions that directly return the result
of memcmp(), strcmp(), etc, as POSIX doesn't place any such restriction
on those library functions. Buildfarm results show that at least on
recent Linux on s390x, memcmp() actually does return INT_MIN sometimes,
causing sort failures.
The agreed-on answer is to remove this restriction and fix relevant
call sites to not make such an assumption; code such as "res = -res"
should be replaced by "INVERT_COMPARE_RESULT(res)". The same is needed
in a few places that just directly negated the result of memcmp or
strcmp.
To help find places having this problem, I've also added a compile option
to nbtcompare.c that causes some of the commonly used comparators to
return INT_MIN/INT_MAX instead of their usual -1/+1. It'd likely be
a good idea to have at least one buildfarm member running with
"-DSTRESS_SORT_INT_MIN". That's far from a complete test of course,
but it should help to prevent fresh introductions of such bugs.
This is a longstanding portability hazard, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/20180928185215.ffoq2xrq5d3pafna@alap3.anarazel.de
The API (EOH_flatten_into) that flattens the expanded value representation
expects the target address to be maxaligned. All it's usage adhere to that
principle except when serializing datums for parallel query. Fix that
usage.
Diagnosed-by: Tom Lane
Author: Tom Lane and Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/11629.1536550032@sss.pgh.pa.us
The variants of these functions that take numeric inputs (OIDs or
column numbers) are supposed to return NULL rather than failing
on bad input; this rule reduces problems with snapshot skew when
queries apply the functions to all rows of a catalog.
has_column_privilege() had careless handling of the case where the
table OID didn't exist. You might get something like this:
select has_column_privilege(9999,'nosuchcol','select');
ERROR: column "nosuchcol" of relation "(null)" does not exist
or you might get a crash, depending on the platform's printf's response
to a null string pointer.
In addition, while applying the column-number variant to a dropped
column returned NULL as desired, applying the column-name variant
did not:
select has_column_privilege('mytable','........pg.dropped.2........','select');
ERROR: column "........pg.dropped.2........" of relation "mytable" does not exist
It seems better to make this case return NULL as well.
Also, the OID-accepting variants of has_foreign_data_wrapper_privilege,
has_server_privilege, and has_tablespace_privilege didn't follow the
principle of returning NULL for nonexistent OIDs. Superusers got TRUE,
everybody else got an error.
Per investigation of Jaime Casanova's report of a new crash in HEAD.
These behaviors have been like this for a long time, so back-patch to
all supported branches.
Patch by me; thanks to Stephen Frost for discussion and review
Discussion: https://postgr.es/m/CAJGNTeP=-6Gyqq5TN9OvYEydi7Fv1oGyYj650LGTnW44oAzYCg@mail.gmail.com
If the column being modified is referenced by a foreign key constraint
of another table, ALTER TABLE would open the other table (to re-parse
the constraint's definition) without having first obtained a lock on it.
This was evidently intentional, but that doesn't mean it's really safe.
It's especially not safe in 9.3, which pre-dates use of MVCC scans for
catalog reads, but even in current releases it doesn't seem like a good
idea.
We know we'll need AccessExclusiveLock shortly to drop the obsoleted
constraint, so just get that a little sooner to close the hole.
Per testing with a patch that complains if we open a relation without
holding any lock on it. I don't plan to back-patch that patch, but we
should close the holes it identifies in all supported branches.
Discussion: https://postgr.es/m/2038.1538335244@sss.pgh.pa.us
When the checkpointer receives a SIGHUP signal to update its configuration,
it may need to update the shared memory for full_page_writes and need to
write a WAL record for it. Now, it is quite possible that the XLOG
machinery has not been initialized by that time and it will lead to
assertion failure while doing that. Fix is to allow the initialization of
the XLOG machinery outside critical section.
This bug has been introduced by the commit 2c03216d83 which added the XLOG
machinery initialization in RecoveryInProgress code path.
Reported-by: Dilip Kumar
Author: Dilip Kumar
Reviewed-by: Michael Paquier and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAFiTN-u4BA8KXcQUWDPNgaKAjDXC=C2whnzBM8TAcv=stckYUw@mail.gmail.com
A restart point or a checkpoint recycling WAL segments treats segments
marked with neither ".done" (archiving is done) or ".ready" (segment is
ready to be archived) in archive_status the same way for archive_mode
being "on" or "always". While for a primary this is fine, a standby
running a restart point with archive_mode = on would try to mark such a
segment as ready for archiving, which is something that will never
happen except after the standby is promoted.
Note that this problem applies only to WAL segments coming from the
local pg_wal the first time archive recovery is run. Segments part of a
self-contained base backup are the most common case where this could
happen, however even in this case normally the .done markers would be
most likely part of the backup. Segments recovered from an archive are
marked as .ready or .done by the startup process, and segments finished
streaming are marked as such by the WAL receiver, so they are handled
already.
Reported-by: Haruka Takatsuka
Author: Michael Paquier
Discussion: https://postgr.es/m/15402-a453c90ed4cf88b2@postgresql.org
Backpatch-through: 9.5, where archive_mode = always has been added.
When a table ownership is changed, we must apply that also to any owned
sequences. (Otherwise, it would result in a situation that cannot be
restored, because linked sequences must have the same owner as the
table.) But this was previously only applied to regular tables and
materialized views. But it should also apply to at least foreign
tables. This patch removes the relkind check altogether, because it
doesn't save very much and just introduces the possibility of similar
omissions.
Bug: #15238
Reported-by: Christoph Berg <christoph.berg@credativ.de>
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
array_out overestimated the space needed for its output, possibly by
a very substantial amount if the array is multi-dimensional, because
of wrong order of operations in the loop that counts the number of
curly-brace pairs needed. While the output string is normally
short-lived, this could still cause problems in extreme cases.
An additional minor error was that it counted one more delimiter than
is actually needed.
Repair those errors, add an Assert that the space is now correctly
calculated, and make some minor improvements in the comments.
I also failed to resist the temptation to get rid of an integer
modulus operation per array element; a simple comparison is sufficient.
This bug dates clear back to Berkeley days, so back-patch to all
supported versions.
Keiichi Hirobe, minor additional work by me
Discussion: https://postgr.es/m/CAH=EFxE9W0tRvQkixR2XJRRCToUYUEDkJZk6tnADXugPBRdcdg@mail.gmail.com
This removes a difference between the standard IsUnderPostmaster
execution environment and that of --boot and --single. In a stand-alone
backend, "SELECT random()" always started at the same seed.
On a system capable of using posix shared memory, initdb could still
conclude "selecting dynamic shared memory implementation ... sysv".
Crashed --boot or --single postgres processes orphaned shared memory
objects having names that collided with the not-actually-random names
that initdb probed. The sysv fallback appeared after ten crashes of
--boot or --single postgres. Since --boot and --single are rare in
production use, systems used for PostgreSQL development are the
principal candidate to notice this symptom.
Back-patch to 9.3 (all supported versions). PostgreSQL 9.4 introduced
dynamic shared memory, but 9.3 does share the "SELECT random()" problem.
Reviewed by Tom Lane and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20180915221546.GA3159382@rfd.leadboat.com
In a case where we have multiple relation-scan nodes in a cursor plan,
such as a scan of an inheritance tree, it's possible to fetch from a
given scan node, then rewind the cursor and fetch some row from an
earlier scan node. In such a case, execCurrent.c mistakenly thought
that the later scan node was still active, because ExecReScan hadn't
done anything to make it look not-active. We'd get some sort of
failure in the case of a SeqScan node, because the node's scan tuple
slot would be pointing at a HeapTuple whose t_self gets reset to
invalid by heapam.c. But it seems possible that for other relation
scan node types we'd actually return a valid tuple TID to the caller,
resulting in updating or deleting a tuple that shouldn't have been
considered current. To fix, forcibly clear the ScanTupleSlot in
ExecScanReScan.
Another issue here, which seems only latent at the moment but could
easily become a live bug in future, is that rewinding a cursor does
not necessarily lead to *immediately* applying ExecReScan to every
scan-level node in the plan tree. Upper-level nodes will think that
they can postpone that call if their child node is already marked
with chgParam flags. I don't see a way for that to happen today in
a plan tree that's simple enough for execCurrent.c's search_plan_tree
to understand, but that's one heck of a fragile assumption. So, add
some logic in search_plan_tree to detect chgParam flags being set on
nodes that it descended to/through, and assume that that means we
should consider lower scan nodes to be logically reset even if their
ReScan call hasn't actually happened yet.
Per bug #15395 from Matvey Arye. This has been broken for a long time,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/153764171023.14986.280404050547008575@wrigleys.postgresql.org
Several users of extensions complained of crashes in parallel workers
that turned out to be due to syscache access from their _PG_init()
functions. Reorder the initialization of parallel workers so that
libraries are restored after the caches are initialized, and inside a
transaction.
This was reported in bug #15350 and elsewhere. We don't consider it
to be a bug: extensions shouldn't do that, because then they can't be
used in shared_preload_libraries. However, it's a fairly obscure
hazard and these extensions worked in practice before parallel query
came along. So let's make it work. Later commits might add a warning
message and eventually an error.
Back-patch to 9.6, where parallel query landed.
Author: Thomas Munro
Reviewed-by: Amit Kapila
Reported-by: Kieran McCusker, Jimmy
Discussion: https://postgr.es/m/153512195228.1489.8545997741965926448%40wrigleys.postgresql.org
Commit 37c54863c removed the code in StandbyAcquireAccessExclusiveLock
that checked the return value of LockAcquireExtended. That created a
bug, because it's still passing reportMemoryError = false to
LockAcquireExtended, meaning that LOCKACQUIRE_NOT_AVAIL will be returned
if we're out of shared memory for the lock table.
In such a situation, the startup process would believe it had acquired an
exclusive lock even though it hadn't, with potentially dire consequences.
To fix, just drop the use of reportMemoryError = false, which allows us
to simplify the call into a plain LockAcquire(). It's unclear that the
locktable-full situation arises often enough that it's worth having a
better recovery method than crash-and-restart. (I strongly suspect that
the only reason the code path existed at all was that it was relatively
simple to do in the pre-37c54863c implementation. But now it's not.)
LockAcquireExtended's reportMemoryError parameter is now dead code and
could be removed. I refrained from doing so, however, because there
was some interest in resurrecting the behavior if we do get reports of
locktable-full failures in the field. Also, it seems unwise to remove
the parameter concurrently with shipping commit f868a8143, which added a
parameter; if there are any third-party callers of LockAcquireExtended,
we want them to get a wrong-number-of-parameters compile error rather
than a possibly-silent misinterpretation of its last parameter.
Back-patch to 9.6 where the bug was introduced.
Discussion: https://postgr.es/m/6202.1536359835@sss.pgh.pa.us
Chris Travers reported that the startup process can repeatedly try to
cancel a backend that is in a posix_fallocate()/EINTR loop and cause it
to loop forever. Teach the retry loop to give up if an interrupt is
pending. Don't actually check for interrupts in that loop though,
because a non-local exit would skip some clean-up code in the caller.
Back-patch to 9.4 where DSM was added (and posix_fallocate() was later
back-patched).
Author: Chris Travers
Reviewed-by: Ildar Musin, Murat Kabilov, Oleksii Kliukin
Tested-by: Oleksii Kliukin
Discussion: https://postgr.es/m/CAN-RpxB-oeZve_J3SM_6%3DHXPmvEG%3DHX%2B9V9pi8g2YR7YW0rBBg%40mail.gmail.com
The EvalPlanQual machinery assumes that any initplans (that is,
uncorrelated sub-selects) used during an EPQ recheck would have already
been evaluated during the main query; this is implicit in the fact that
execPlan pointers are not copied into the EPQ estate's es_param_exec_vals.
But it's possible for that assumption to fail, if the initplan is only
reached conditionally. For example, a sub-select inside a CASE expression
could be reached during a recheck when it had not been previously, if the
CASE test depends on a column that was just updated.
This bug is old, appearing to date back to my rewrite of EvalPlanQual in
commit 9f2ee8f28, but was not detected until Kyle Samson reported a case.
To fix, force all not-yet-evaluated initplans used within the EPQ plan
subtree to be evaluated at the start of the recheck, before entering the
EPQ environment. This could be inefficient, if such an initplan is
expensive and goes unused again during the recheck --- but that's piling
one layer of improbability atop another. It doesn't seem worth adding
more complexity to prevent that, at least not in the back branches.
It was convenient to use the new-in-v11 ExecEvalParamExecParams function
to implement this, but I didn't like either its name or the specifics of
its API, so revise that.
Back-patch all the way. Rather than rewrite the patch to avoid depending
on bms_next_member() in the oldest branches, I chose to back-patch that
function into 9.4 and 9.3. (This isn't the first time back-patches have
needed that, and it exhausted my patience.) I also chose to back-patch
some test cases added by commits 71404af2a and 342a1ffa2 into 9.4 and 9.3,
so that the 9.x versions of eval-plan-qual.spec are all the same.
Andrew Gierth diagnosed the problem and contributed the added test cases,
though the actual code changes are by me.
Discussion: https://postgr.es/m/A033A40A-B234-4324-BE37-272279F7B627@tripadvisor.com
Allowing sub-select containing LIMIT/OFFSET in workers can lead to
inconsistent results at the top-level as there is no guarantee that the
row order will be fully deterministic. The fix is to prohibit pushing
LIMIT/OFFSET within sub-selects to workers.
Reported-by: Andrew Fletcher
Bug: 15324
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Backpatch-through: 9.6
Discussion: https://postgr.es/m/153417684333.10284.11356259990921828616@wrigleys.postgresql.org
XLogInsert fails to attach a required FPI to the first record after
full_page_writes is turned on by the last checkpoint. This bug got
introduced in 9.5 due to code rearrangement in commits 2c03216d83 and
2076db2aea. Fix it by ensuring that XLogInsertRecord performs a
recomputation when the given record is generated with FPW as off but
found that the flag has been turned on while actually inserting the
record.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila
Backpatch-through: 9.5 where this problem was introduced
Discussion: https://postgr.es/m/20180420.151043.74298611.horiguchi.kyotaro@lab.ntt.co.jp
Commit c8ea87e4b introduced a temporary conversion buffer for
substrings extracted during regexp splits. Unfortunately the code that
sized it was failing to ignore the effects of ignored degenerate
regexp matches, so for regexp_split_* calls it could under-size the
buffer in such cases.
Fix, and add some regression test cases (though those will only catch
the bug if run in a multibyte encoding).
Backpatch to 9.3 as the faulty code was.
Thanks to the PostGIS project, Regina Obe and Paul Ramsey for the
report (via IRC) and assistance in analysis. Patch by me.
spgrescan would first reset traversalCxt, and then traverse a
potentially non-empty stack containing pointers to traversalValues
which had been allocated in those contexts, freeing them a second
time. This bug originates in commit ccd6eb49a where traversalValue was
introduced.
Repair by traversing the stack before the context reset; this isn't
ideal, since it means doing retail pfree in a context that's about to
be reset, but the freeing of a stack entry is also done in other
places in the code during the scan so it's not worth trying to
refactor it further. Regression test added.
Backpatch to 9.6 where the problem was introduced.
Per bug #15378; analysis and patch by me, originally from a report on
IRC by user velix; see also PostGIS ticket #4174; review by Alexander
Korotkov.
Discussion: https://postgr.es/m/153663176628.23136.11901365223750051490@wrigleys.postgresql.org
ginRedoRecompress() replays actions over compressed segments of posting list
in-place. However, it might lead to write past pg_upper, because intermediate
state during playing the changes can take more space than both original state
and final state. This commit fixes that by refuse from in-place modification.
Instead page tail is copied once modification is started, and then it's used
as the source of original segments. Backpatch to 9.4 where posting list
compression was introduced.
Reported-by: Sivasubramanian Ramasubramanian
Discussion: https://postgr.es/m/1536091151804.6588%40amazon.com
Author: Alexander Korotkov based on patch from and ideas by Sivasubramanian Ramasubramanian
Review: Sivasubramanian Ramasubramanian
Backpatch-through: 9.4
This patch removes two sources of interference between nominally
independent functions when one SPI-using function calls another,
perhaps without knowing that it does so.
Chapman Flack pointed out that xml.c's query_to_xml_internal() expects
SPI_tuptable and SPI_processed to stay valid across datatype output
function calls; but it's possible that such a call could involve
re-entrant use of SPI. It seems likely that there are similar hazards
elsewhere, if not in the core code then in third-party SPI users.
Previously SPI_finish() reset SPI's API globals to zeroes/nulls, which
would typically make for a crash in such a situation. Restoring them
to the values they had at SPI_connect() seems like a considerably more
useful behavior, and it still meets the design goal of not leaving any
dangling pointers to tuple tables of the function being exited.
Also, cause SPI_connect() to reset these variables to zeroes/nulls after
saving them. This prevents interference in the opposite direction: it's
possible that a SPI-using function that's only ever been tested standalone
contains assumptions that these variables start out as zeroes. That was
the case as long as you were the outermost SPI user, but not so much for
an inner user. Now it's consistent.
Report and fix suggestion by Chapman Flack, actual patch by me.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/9fa25bef-2e4f-1c32-22a4-3ad0723c4a17@anastigmatix.net
It's somewhat surprising that we got away with this before. (Actually,
since nobody tests this routinely AFAIK, it might've been broken for
awhile. But it's definitely broken in the wake of commit f868a8143.)
It seems sufficient to limit the forced recursion to a small number
of levels.
Back-patch to all supported branches, like the preceding patch.
Discussion: https://postgr.es/m/12259.1532117714@sss.pgh.pa.us
LockRelationOid and sibling routines supposed that, if our session already
holds the lock they were asked to acquire, they could skip calling
AcceptInvalidationMessages on the grounds that we must have already read
any remote sinval messages issued against the relation being locked.
This is normally true, but there's a critical special case where it's not:
processing inside AcceptInvalidationMessages might attempt to access system
relations, resulting in a recursive call to acquire a relation lock.
Hence, if the outer call had acquired that same system catalog lock, we'd
fall through, despite the possibility that there's an as-yet-unread sinval
message for that system catalog. This could, for example, result in
failure to access a system catalog or index that had just been processed
by VACUUM FULL. This is the explanation for buildfarm failures we've been
seeing intermittently for the past three months. The bug is far older
than that, but commits a54e1f158 et al added a new recursion case within
AcceptInvalidationMessages that is apparently easier to hit than any
previous case.
To fix this, we must not skip calling AcceptInvalidationMessages until
we have *finished* a call to it since acquiring a relation lock, not
merely acquired the lock. (There's already adequate logic inside
AcceptInvalidationMessages to deal with being called recursively.)
Fortunately, we can implement that at trivial cost, by adding a flag
to LOCALLOCK hashtable entries that tracks whether we know we have
completed such a call.
There is an API hazard added by this patch for external callers of
LockAcquire: if anything is testing for LOCKACQUIRE_ALREADY_HELD,
it might be fooled by the new return code LOCKACQUIRE_ALREADY_CLEAR
into thinking the lock wasn't already held. This should be a fail-soft
condition, though, unless something very bizarre is being done in
response to the test.
Also, I added an additional output argument to LockAcquireExtended,
assuming that that probably isn't called by any outside code given
the very limited usefulness of its additional functionality.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/12259.1532117714@sss.pgh.pa.us
workers.
Allowing window function calculation in workers leads to inconsistent
results because if the input row ordering is not fully deterministic, the
output of window functions might vary across workers. The fix is to treat
them as parallel-restricted.
In the passing, improve the coding pattern in max_parallel_hazard_walker
so that it has a chain of mutually-exclusive if ... else if ... else if
... else if ... IsA tests.
Reported-by: Marko Tiikkaja
Bug: 15324
Author: Amit Kapila
Reviewed-by: Tom Lane
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAL9smLAnfPJCDUUG4ckX2iznj53V7VSMsYefzZieN93YxTNOcw@mail.gmail.com
At the beginning of recovery, information from replication slots is
recovered from disk to memory. In order to ensure the durability of the
information, the status file as well as its parent directory are
synced. It happens that the sync on the parent directory was done
directly using the status file path, which is logically incorrect, and
the current code has been doing a sync on the same object twice in a
row.
Reported-by: Konstantin Knizhnik
Diagnosed-by: Konstantin Knizhnik
Author: Michael Paquier
Discussion: https://postgr.es/m/9eb1a6d5-b66f-2640-598d-c5ea46b8f68a@postgrespro.ru
Backpatch-through: 9.4-
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Healthy clients of servers having poor I/O performance, such as
buildfarm members hamster and tern, saw unexpected timeouts. That
disagreed with documentation. This fix adds one gettimeofday() call
whenever ProcessRepliesIfAny() finds no client reply messages.
Back-patch to 9.4; the bug's symptom is rare and mild, and the code all
moved between 9.3 and 9.4.
Discussion: https://postgr.es/m/20180826034600.GA1105084@rfd.leadboat.com
Startup process has improved its calculation of incorrect minimum
consistent point in 8d68ee6, which ensures that all WAL available gets
replayed when doing crash recovery, and has introduced an incorrect
calculation of the minimum recovery point for non-startup processes,
which can cause incorrect page references on a standby when for example
the background writer flushed a couple of pages on-disk but was not
updating the control file to let a subsequent crash recovery replay to
where it should have.
The only case where this has been reported to be a problem is when a
standby needs to calculate the latest removed xid when replaying a btree
deletion record, so one would need connections on a standby that happen
just after recovery has thought it reached a consistent point. Using a
background worker which is started after the consistent point is reached
would be the easiest way to get into problems if it connects to a
database. Having clients which attempt to connect periodically could
also be a problem, but the odds of seeing this problem are much lower.
The fix used is pretty simple, as the idea is to give access to the
minimum recovery point written in the control file to non-startup
processes so as they use a reference, while the startup process still
initializes its own references of the minimum consistent point so as the
original problem with incorrect page references happening post-promotion
with a crash do not show up.
Reported-by: Alexander Kukushkin
Diagnosed-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Alexander Kukushkin
Discussion: https://postgr.es/m/153492341830.1368.3936905691758473953@wrigleys.postgresql.org
Backpatch-through: 9.3
When a postmaster gets into its phase PM_STARTUP, it would start
background workers using BgWorkerStart_PostmasterStart mode immediately,
which would cause problems for a fast shutdown as the postmaster forgets
to send SIGTERM to already-started background workers. With smart and
immediate shutdowns, this correctly happened, and fast shutdown is the
only mode missing the shot.
Author: Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mvnD8+DZUfzpi50DoaDfZRDfd7S=gwj5vU9GYn8UvHkA@mail.gmail.com
Backpatch-through: 9.5
