Since its introduction in fc34b0d9de, the default
maintenance_io_concurrency has been larger than the default
effective_io_concurrency. maintenance_io_concurrency primarily
controlled prefetching done on behalf of the whole system, for
operations like recovery. Therefore it makes sense for it to have a
value equal to or greater than effective_io_concurrency, which controls
I/O concurrency for reading a relation in a bitmap heap scan.
ff79b5b2ab increased effective_io_concurrency to 16, so we'll increase
maintenance_io_concurrency as well. For now, though, we'll keep the
defaults of effective_io_concurrency and maintenance_io_concurrency
equal to one another (16).
On fast, high IOPs systems, significantly higher values of
maintenance_io_concurrency are observably beneficial [1]. However, such
values would flood low IOPs systems and increase overall system I/O
latency.
It is worth mentioning that since 9256822608 and c3e775e608,
maintenance_io_concurrency also controls the I/O concurrency of each
vacuum worker. Since many autovacuum workers may be simultaneously
issuing I/Os, we want to keep maintenance_io_concurrency appropriately
conservative.
[1] https://postgr.es/m/c5d52837-6256-0556-ac8c-d6d3d558820a%40enterprisedb.com
Suggested-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmxdHQaU%2B2Zpe6d%3Dx%3D0vigJ1sfWwwVYLJAf%3Dud_wQ_VcUw%40mail.gmail.com
In the initial pipeline support for psql added in 41625ab8ea, \g was
used as the way to push extended query into an ongoing pipeline. \gx
was blocked.
These two meta-commands have format-related options that can be applied
when fetching a query result (expanded, etc.). As the results of a
pipeline are fetched asynchronously, not at the moment of the
meta-command execution but at the moment of a \getresults or a
\endpipeline, authorizing \g while blocking \gx leads to a confusing
implementation, making one think that psql should be smart enough to
remember the output format options defined from the time when \g or \gx
were executed. Doing so would lead to more code complications when
retrieving a batch of results. There is an extra argument other than
simplicity here: the output format options defined at the point of a
\getresults or a \endpipeline execution should be what affect the output
format for a batch of results.
To avoid any confusion, we have settled to the introduction of a new
meta-command called \sendpipeline, replacing \g when within a pipeline.
An advantage of this design is that it is possible to add new options
specific to pipelines when sending a query buffer, independent of \g
and \gx, should it prove to be necessary.
Most of the changes of this commit happen in the regression tests, where
\g is replaced by \sendpipeline. More tests are added to check that \g
is not allowed.
Per discussion between the author, Daniel Vérité and me.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/ad4b9f1a-f7fe-4ab8-8546-90754726d0be@manitou-mail.org
This commit just does the minimal wiring up of the AIO subsystem, added in the
next commit, to the rest of the system. The next commit contains more details
about motivation and architecture.
This commit is kept separate to make it easier to review, separating the
changes across the tree, from the implementation of the new subsystem.
We discussed squashing this commit with the main commit before merging AIO,
but there has been a mild preference for keeping it separate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
This is similar to pg_upgrade's --link option, except that here we won't
typically be able to use it for every input file: sometimes we will need
to reconstruct a complete backup from blocks stored in different files.
However, when a whole file does need to be copied, we can use an
optimized copying strategy: see the existing --clone and
--copy-file-range options and the code to use CopyFile() on Windows.
This commit adds a new strategy: add a hard link to an existing file.
Making a hard link doesn't actually copy anything, but it makes sense
for the code to treat it as doing so.
This is useful when the input directories are merely staging directories
that will be removed once the restore is complete. In such cases, there
is no need to actually copy the data, and making a bunch of new hard
links can be very quick. However, it would be quite dangerous to use it
if the input directories might later be reused for any other purpose,
since starting postgres on the output directory would destructively
modify the input directories. For that reason, using this new option
causes pg_combinebackup to emit a warning about the danger involved.
Author: Israel Barth Rubio <barthisrael@gmail.com>
Co-authored-by: Robert Haas <robertmhaas@gmail.com> (cosmetic changes)
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Discussion: http://postgr.es/m/CA+TgmoaEFsYHsMefNaNkU=2SnMRufKE3eVJxvAaX=OWgcnPmPg@mail.gmail.com
Add --no-policies option to control row level security policy handling
in dump and restore operations. When this option is used, both CREATE
POLICY commands and ALTER TABLE ... ENABLE ROW LEVEL SECURITY commands
are excluded from dumps and skipped during restores.
This is useful in scenarios where policies need to be redefined in the
target system or when moving data between environments with different
security requirements.
Author: Nikolay Samokhvalov <nik@postgres.ai>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: newtglobal postgresql_contributors <postgresql_contributors@newtglobalcorp.com>
Discussion: https://postgr.es/m/CAM527d8kG2qPKvbfJ=OYJkT7iRNd623Bk+m-a4ngm+nyHYsHog@mail.gmail.com
isn's weak mode used to be a simple static variable, settable only
via the isn_weak(boolean) function. This wasn't optimal, as this
means it doesn't respect transactions nor respond to RESET ALL.
This patch makes isn.weak a GUC parameter instead, so that
it acts like any other user-settable parameter.
The isn_weak() functions are retained for backwards compatibility.
But we must fix their volatility markings: they were marked IMMUTABLE
which is surely incorrect, and PARALLEL RESTRICTED which isn't right
for GUC-related functions either. Mark isn_weak(boolean) as
VOLATILE and PARALLEL UNSAFE, matching set_config(). Mark isn_weak()
as STABLE and PARALLEL SAFE, matching current_setting().
Reported-by: Viktor Holmberg <v@viktorh.net>
Diagnosed-by: Daniel Gustafsson <daniel@yesql.se>
Author: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/790bc1f9-74dc-4b50-94d2-8147315b1556@Spark
This commit introduces a new GUC, log_lock_failure, which controls whether
a detailed log message is produced when a lock acquisition fails. Currently,
it only supports logging lock failures caused by SELECT ... NOWAIT.
The log message includes information about all processes holding or
waiting for the lock that couldn't be acquired, helping users analyze and
diagnose the causes of lock failures.
Currently, this option does not log failures from SELECT ... SKIP LOCKED,
as that could generate excessive log messages if many locks are skipped,
causing unnecessary noise.
This mechanism can be extended in the future to support for logging
lock failures from other commands, such as LOCK TABLE ... NOWAIT.
Author: Yuki Seino <seinoyu@oss.nttdata.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/411280a186cc26ef7034e0f2dfe54131@oss.nttdata.com
This commit enhances pg_rewind's --write-recovery-conf option to
include the dbname in the generated primary_conninfo value when
specified in the --source-server option. With this modification, the
rewound server can connect to the primary server without manual
configuration file modifications when sync_replication_slots is
enabled.
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAkW=Ht0k9dVoBTCcqLiiZ2MXhVr+d=j2T_EZMerGrLWQ@mail.gmail.com
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Commit 0fbceae84 put a "&zwsp;" in almost but not quite the correct
place to avoid "The contents of fo:block line 1 exceed the available
area" warnings. Per buildfarm.
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
The previous wording talked about a "single pass over the data",
which can be read as promising more than intended (to wit, that only
one WindowAgg plan node will be used). What we promise is only what
the SQL spec requires, namely that the data not get re-sorted between
window functions with compatible PARTITION BY/ORDER BY clauses.
Adjust the wording in hopes of making this clearer.
Reported-by: Christopher Inokuchi <cinokuchi@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CABde6B5va2wMsnM79u_x=n9KUgfKQje_pbLROEBmA9Ru5XWidw@mail.gmail.com
Backpatch-through: 13
It isn't clear how these should behave, so let's wait to implement them
until we are sure how to do it.
This feature was initially added by commit 89f908a6d0, so it hasn't
been released yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://postgr.es/m/e773bc11-4ac1-40de-bb91-814e02f05b6d%40eisentraut.org
Presently, this section lists a couple of parallelized parts of
pg_upgrade and suggests a starting point for setting the --jobs
option. The list of parallelized tasks is not particularly
actionable, and the phrasing for the --jobs recommendation is
confusing to some readers.
This commit attempts to improve this section by eliminating the
list of parallelized tasks and instead highlighting that --jobs is
most useful for clusters with multiple databases or tablespaces.
Additionally, the recommendation for setting --jobs is simplified
to suggest starting with the number of CPU cores.
Reported-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/Z8dBn_5iGLNuYiPo%40nathan
Commit 95dbd827f2 updated a bunch
of similar cases in the documentation, but missed this one.
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
After more discussion about commit ce62f2f2a0, rename the index AM
property amcancrosscompare to two separate properties
amconsistentequality and amconsistentordering. Also improve the
documentation and update some comments that were previously missed.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/E1tngY6-0000UL-2n%40gemulon.postgresql.org
This allows smallint, integer, and bigint values to be cast to and
from bytea. The bytea value is the two's complement representation of
the integer, with the most significant byte first. For example:
1234::bytea -> \x000004d2
(-1234)::bytea -> \xfffffb2e
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TPtOp6%2BkFX5QX3fH1SVr7v65uHr-7yEJ%3DGMGQi5uhGtcA%40mail.gmail.com
The threshold is two billion members, which was interpreted as 2GB
in the documentation. Fix to reflect that each member takes up five
bytes, which translates to about 10GB. This is not exact, because of
page boundaries. While at it, mention the maximum size 20GB.
This has been wrong since commit c552e171d1, so backpatch to
version 14.
Author: Alex Friedman <alexf01@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CACbFw60UOk6fCC02KsyT3OfU9Dnuq5roYxdw2aFisiN_p1L0bg@mail.gmail.com
Backpatch-through: 14
This commit adds a new --missing-only option that can be used in
conjunction with --analyze-only and --analyze-in-stages. When this
option is specified, vacuumdb will generate ANALYZE commands for a
relation if it is missing any statistics it should ordinarily have.
For example, if a table has statistics for one column but not
another, we will analyze the whole table. A similar principle
applies to extended statistics, expression indexes, and table
inheritance.
Co-authored-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: TODO
Discussion: https://postgr.es/m/Z5O1bpcwDrMgyrYy%40nathan
This reverts commit 5ead85fbc8.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
An additional paramater ("strip_in_arrays") is added to these functions.
It defaults to false. If true, then null array elements are removed as
well as null valued object fields. JSON that just consists of a single
null is not affected.
Author: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://postgr.es/m/4BCECCD5-4F40-4313-9E98-9E16BEB0B01D@gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
This allows to redefine an existing non-inheritable constraint to be
inheritable, which allows to straighten up situations with NO INHERIT
constraints so that thay can become normal constraints without having to
re-verify existing data. For existing inheritance children this may
require creating additional constraints, if they don't exist already.
It also allows to do the opposite, if only for symmetry.
Author: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAF1DzPVfOW6Kk=7SSh7LbneQDJWh=PbJrEC_Wkzc24tHOyQWGg@mail.gmail.com
This updates the paragraph on backwards compatitibility for server
features to include --incremental which only works on servers with
v17 or newer. Backpatch down to v17 where incremental backup was
added.
Author: David G. Johnston <David.G.Johnston@Gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAKFQuwZYfZyeTkS3g2Ovw84TsxHa796xnf-u5kfgn_auyxZk0Q@mail.gmail.com
Backpatch-through: 17
pgstat_bestart(), used post-authentication to set up a backend entry
in the PgBackendStatus array, so as its data becomes visible in
pg_stat_activity and related catalogs, has its logic divided into three
routines with this commit, called in order at different steps of the
backend initialization:
* pgstat_bestart_initial() sets up the backend entry with a minimal
amount of information, reporting it with a new BackendState called
STATE_STARTING while waiting for backend initialization and client
authentication to complete. The main benefit that this offers is
observability, so as it is possible to monitor the backend activity
during authentication. This step happens earlier than in the logic
prior to this commit. pgstat_beinit() happens earlier as well, before
authentication.
* pgstat_bestart_security() reports the SSL/GSS status of the
connection, once authentication completes. Auxiliary processes, for
example, do not need to call this step, hence it is optional. This
step is called after performing authentication, same as previously.
* pgstat_bestart_final() reports the user and database IDs, takes the
entry out of STATE_STARTING, and reports its application_name. This is
called as the last step of the three, once authentication completes.
An injection point is added, with a test checking that the "starting"
phase of a backend entry is visible in pg_stat_activity. Some follow-up
patches are planned to take advantage of this refactoring with more
information provided in backend entries during authentication (LDAP
hanging was a problem for the author, initially).
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
Convert the list of UUID functions into a table for better
readability. This commit also adds references to the UUID type section
and includes descriptions of different UUID generation algorithm
versions.
Author: Andy Alsup <bluesbreaker@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/CADOZ7s7OHag+r6w+BzKw2xgb3fVtAD-pU=_N9-9pSe5W1TB+xQ@mail.gmail.com
We've traditionally accepted "name := value" syntax for
cursor arguments in plpgsql. But it turns out that the
equivalent statements in Oracle use "name => value".
Since we accept both forms of punctuation for function
arguments, it makes sense to do the same here.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Gilles Darold <gilles@darold.net>
Discussion: https://postgr.es/m/CAFj8pRA3d0ARQEMbABa1n6q25AUdNmyO8aGs56XNf9pD4sRMjQ@mail.gmail.com
Calculate the insert threshold for triggering an autovacuum of a
relation based on the number of unfrozen pages.
By only considering the unfrozen portion of the table when calculating
how many tuples to add to the insert threshold, we can trigger more
frequent vacuums of insert-heavy tables. This increases the chances of
vacuuming those pages when they still reside in shared buffers
This also increases the number of autovacuums triggered by tuples
inserted and not by wraparound risk. We prefer to freeze these pages
during insert-triggered autovacuums, as anti-wraparound vacuums are not
automatically canceled by conflicting lock requests.
We calculate the unfrozen percentage of the table using the recently
added (99f8f3fbbc) relallfrozen column of pg_class.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
Add relallfrozen, an estimate of the number of pages marked all-frozen
in the visibility map.
pg_class already has relallvisible, an estimate of the number of pages
in the relation marked all-visible in the visibility map. This is used
primarily for planning.
relallfrozen, together with relallvisible, is useful for estimating the
outstanding number of all-visible but not all-frozen pages in the
relation for the purposes of scheduling manual VACUUMs and tuning vacuum
freeze parameters.
A future commit will use relallfrozen to trigger more frequent vacuums
on insert-focused workloads with significant volume of frozen data.
Bump catalog version
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
This commit adds a new "remote_backend_pid" output column to
the postgres_fdw_get_connections function. It returns the process ID of
the remote backend, on the foreign server, handling the connection.
This enhancement is useful for troubleshooting, monitoring, and reporting.
For example, if a connection is unexpectedly closed by the foreign server,
the remote backend's PID can help diagnose the cause.
No extension version bump is needed, as commit c297a47c5f already
handled it for v18~.
Author: Sagar Dilip Shedge <sagar.shedge92@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAPhYifF25q5xUQWXETfKwhc0YVa_6+tfG9Kw4bCvCjpCWxYs2A@mail.gmail.com
Commit ddb17e387a attempted to avoid
confusing users by displaying digits after the decimal point only when
nloops > 1, since it's impossible to have a fraction row count after a
single iteration. However, this made the regression tests unstable since
parallal queries will have nloops>1 for all nodes below the Gather or
Gather Merge in normal cases, but if the workers don't start in time and
the leader finishes all the work, they will suddenly have nloops==1,
making it unpredictable whether the digits after the decimal point would
be displayed or not. Although 44cbba9a7f
seemed to fix the immediate failures, it may still be the case that there
are lower-probability failures elsewhere in the regression tests.
Various fixes are possible here. For example, it has previously been
proposed that we should try to display the digits after the decimal
point only if rows/nloops is an integer, but currently rows is storead
as a float so it's not theoretically an exact quantity -- precision
could be lost in extreme cases. It has also been proposed that we
should try to display the digits after the decimal point only if we're
under some sort of construct that could potentially cause looping
regardless of whether it actually does. While such ideas are not
without merit, this patch adopts the much simpler solution of always
display two decimal digits. If that approach stands up to scrutiny
from the buildfarm and human users, it spares us the trouble of doing
anything more complex; if not, we can reassess.
This commit incidentally reverts 44cbba9a7f,
which should no longer be needed.
Author: Robert Haas <robertmhaas@gmail.com>
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Discussion: http://postgr.es/m/CA+TgmoazzVHn8sFOMFAEwoqBTDxKT45D7mvkyeHgqtoD2cn58Q@mail.gmail.com
Stop comparing access method OID values against HASH_AM_OID and
BTREE_AM_OID, and instead check the IndexAmRoutine for an index to see
if it advertises its ability to perform the necessary ordering,
hashing, or cross-type comparing functionality. A field amcanorder
already existed, this uses it more widely. Fields amcanhash and
amcancrosscompare are added for the other purposes.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
Previously we used attname for both table and index columns, but
that is problematic for indexes because their attnames are assigned
by internal rules that don't guarantee to preserve the names across
dump and reload. (This is what's causing the remaining buildfarm
failures in cross-version-upgrade tests.) Fortunately we can use
attnum instead, since there's no such thing as adding or dropping
columns in an existing index. We met this same problem previously
with ALTER INDEX ... SET STATISTICS, and solved it the same way,
cf commit 5b6d13eec.
In pg_restore_attribute_stats() itself, we accept either attnum or
attname, but the policy used by pg_dump is to always use attname
for tables and attnum for indexes.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/1457469.1740419458@sss.pgh.pa.us
This patch introduces the '--enable-two-phase' option to the
'pg_createsubscriber' utility, allowing users to enable two-phase commit
for all subscriptions during their creation.
Note that even without this option users can enable the two_phase option
for the subscriptions created by pg_createsubscriber. However, it requires
the subscription to be disabled first which could be inconvenient for
users.
When two-phase commit is enabled, prepared transactions are sent to the
subscriber at the time of 'PREPARE TRANSACTION', and they are processed as
two-phase transactions on the subscriber as well. If disabled, prepared
transactions are sent only when committed and are processed immediately by
the subscriber.
Author: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAHv8RjLPdFP=kA5LNSmWZ=+GMXmO+LczvV6p9HJjsXxZz10KGA@mail.gmail.com
This commit is a rework of 2421e9a51d, about which Andres Freund has
raised some concerns as it is valuable to have both track_io_timing and
track_wal_io_timing in some cases, as the WAL write and fsync paths can
be a major bottleneck for some workloads. Hence, it can be relevant to
not calculate the WAL timings in environments where pg_test_timing
performs poorly while capturing some IO data under track_io_timing for
the non-WAL IO paths. The opposite can be also true: it should be
possible to disable the non-WAL timings and enable the WAL timings (the
previous GUC setups allowed this possibility).
track_wal_io_timing is added back in this commit, controlling if WAL
timings should be calculated in pg_stat_io for the read, fsync and write
paths, as done previously with pg_stat_wal. pg_stat_wal previously
tracked only the sync and write parts (now removed), read stats is new
data tracked in pg_stat_io, all three are aggregated if
track_wal_io_timing is enabled. The read part matters during recovery
or if a XLogReader is used.
Extra note: more control over if the types of timings calculated in
pg_stat_io could be done with a GUC that lists pairs of (IOObject,IOOp).
Reported-by: Andres Freund <andres@anarazel.de>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/3opf2wh2oljco6ldyqf7ukabw3jijnnhno6fjb4mlu6civ5h24@fcwmhsgmlmzu
After commit f3dae2ae58, the primary purpose of separating the
pg_set_*_stats() from the pg_restore_*_stats() variants was
eliminated.
Leave pg_restore_relation_stats() and pg_restore_attribute_stats(),
which satisfy both purposes, and remove pg_set_relation_stats() and
pg_set_attribute_stats().
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/1457469.1740419458@sss.pgh.pa.us
This commit documents that the failover option is not copied when using
the pg_copy_logical_replication_slot function.
In passing, we modify the comments in the function clarifying the reason
for this behavior.
Reported-by: <duffieldzane@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/173976850802.682632.11315364077431550250@wrigleys.postgresql.org
This commit adds %P to psql prompts, able to report the status of a
pipeline depending on PQpipelineStatus(): on, off or abort.
The following variables are added to report the state of an ongoing
pipeline:
- PIPELINE_SYNC_COUNT: reports the number of piped syncs.
- PIPELINE_COMMAND_COUNT: reports the number of piped commands, a
command being either \bind, \bind_named, \close or \parse.
- PIPELINE_RESULT_COUNT: reports the results available to read with
\getresults.
These variables can be used with \echo or in a prompt, using "%:name:"
in PROMPT1, PROMPT2 or PROMPT3. Some basic regression tests are added
for these. The suggestion to use variables to show the details about
the status counters comes from me. The original patch proposed was less
extensible, hardcoding the output in the prompt.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/CAO6_XqroE7JuMEm1sWz55rp9fAYX2JwmcP_3m_v51vnOFdsLiQ@mail.gmail.com
Two members in PGoauthBearerRequest were incorrectly marked as const.
While in there, align the name of the struct with the typedef as per
project style.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/912516.1740329361@sss.pgh.pa.us
The four following attributes are removed from pg_stat_wal:
* wal_write
* wal_sync
* wal_write_time
* wal_sync_time
a051e71e28 has added an equivalent of this information in pg_stat_io
with more granularity as this now spreads across the backend types, IO
context and IO objects. So, keeping the same information in pg_stat_wal
has little benefits.
Another benefit of this commit is the removal of PendingWalStats,
simplifying an upcoming patch to add per-backend WAL statistics, which
already support IO statistics and which have access to the write/sync
stats data of WAL.
The GUC track_wal_io_timing, that was used to enable or disable the
aggregation of the write and sync timings for WAL, is also removed.
pgstat_prepare_io_time() is simplified.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the update of PgStat_WalStats.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
(Initially the proposal was to keep \conninfo alone and add this feature
as \conninfo+, but we decided against keeping the original.)
Also display more fields than before, though not as many as were
suggested during the discussion. In particular, we don't show 'role'
nor 'session authorization', for both which a case can probably be made.
These can be added as followup commits, if we agree to it.
Some (most?) reviewers actually reviewed rather different versions of
the patch and do not necessarily endorse the current one.
Co-authored-by: Maiquel Grassi <grassi@hotmail.com.br>
Co-authored-by: Hunaid Sohail <hunaidpgml@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Sami Imseih <simseih@amazon.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Luzanov <p.luzanov@postgrespro.ru>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Erik Wienhold <ewie@ewie.name>
Discussion: https://postgr.es/m/CP8P284MB24965CB63DAC00FC0EA4A475EC462@CP8P284MB2496.BRAP284.PROD.OUTLOOK.COM
Concurrently dropping either the granted role or the grantee
does not stop GRANT from completing, instead resulting in a
dangling role reference in pg_auth_members. That's relatively
harmless in the short run, but inconsistent catalog entries
are not a good thing.
This patch solves the problem by adding the granted and grantee
roles as explicit shared dependencies of the pg_auth_members entry.
That's a bit indirect, but it works because the pg_shdepend code
applies the necessary locking and rechecking.
Commit 6566133c5 previously established similar handling for
the grantor column of pg_auth_members; it's not clear why it
didn't cover the other two role OID columns.
A side-effect of this approach is that DROP OWNED BY will now drop
pg_auth_members entries that mention the target role as either the
granted or grantee role. That's clearly appropriate for the
grantee, since we'll drop its other privileges too. It doesn't
seem too far out of line for the granted role, since we're
presumably about to drop it and besides we're removing all reasons
why it'd matter to be a member of it. (One could argue that this
makes DropRole's code to auto-drop pg_auth_members entries
unnecessary, but I chose to leave it in place since perhaps some
people's workflows expect that to work without a DROP OWNED BY.)
Note to patch readers: CreateRole's first CommandCounterIncrement
call is now unconditional, because this change creates another
case in which it's needed, and it seemed to be more trouble than
it's worth to preserve that micro-optimization.
Arguably this is a bug fix, but the fact that it changes the
expected contents of pg_shdepend seems like not a great thing
to do in the stable branches, and perhaps we don't want the
change in DROP OWNED BY semantics there either. On the other
hand, I opted not to force a catversion bump in HEAD, because
the presence or absence of these entries doesn't matter for
most purposes.
Reported-by: Virender Singla <virender.cse@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/CAM6Zo8woa62ZFHtMKox6a4jb8qQ=w87R2L0K8347iE-juQL2EA@mail.gmail.com
This change adds a new option --set-char-signedness to pg_upgrade. It
enables user to set arbitrary signedness during pg_upgrade. This helps
cases where user who knew they copied the v17 source cluster from
x86 (signedness=true) to ARM (signedness=false) can pg_upgrade
properly without the prerequisite of acquiring an x86 VM.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
With the newly added option --char-signedness, pg_resetwal updates the
default char signedness flag in the controlfile. This option is
primarily intended for an upcoming patch that pg_upgrade supports
preserving the default char signedness during upgrades, and is not
meant for manual operation.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
The signedness of the 'char' type in C is
implementation-dependent. For instance, 'signed char' is used by
default on x86 CPUs, while 'unsigned char' is used on aarch
CPUs. Previously, we accidentally let C implementation signedness
affect persistent data. This led to inconsistent results when
comparing char data across different platforms.
This commit introduces a new 'default_char_signedness' field in
ControlFileData to store the signedness of the 'char' type. While this
change does not encourage the use of 'char' without explicitly
specifying its signedness, this field can be used as a hint to ensure
consistent behavior for pre-v18 data files that store data sorted by
the 'char' type on disk (e.g., GIN and GiST indexes), especially in
cross-platform replication scenarios.
Newly created database clusters unconditionally set the default char
signedness to true. pg_upgrade (with an upcoming commit) changes this
flag for clusters if the source database cluster has
signedness=false. As a result, signedness=false setting will become
rare over time. If we had known about the problem during the last
development cycle that forced initdb (v8.3), we would have made all
clusters signed or all clusters unsigned. Making pg_upgrade the only
source of signedness=false will cause the population of database
clusters to converge toward that retrospective ideal.
Bump catalog version (for the catalog changes) and PG_CONTROL_VERSION
(for the additions in ControlFileData).
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
The bibliography entries for olsen93 and ong90 lacked links to
online copies. While ong90 is available in digital form, the
olsen93 thesis is only available as a physical copy in the UCB
library. To save people from searching for it, we still link
to it via the UCB library page.
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxFcJYdRvzgt59N26XjFp2tFFUXu+VN+x8Uo0NbDUCMCbw@mail.gmail.com
Previously, a WARNING was issued at the time of defining a subscription
with origin=NONE only when the publisher subscribed to the same table from
other publishers, indicating potential data origination from different
origins. However, the publisher can subscribe to the partition ancestors
or partition children of the table from other publishers, which could also
result in mixed-origin data inclusion. So, give a WARNING in those cases
as well.
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/5eda6a9c-63cf-404d-8a49-8dcb116a29f3@postgrespro.ru
The type argument wasn't actually really necessary. It was a remnant
of converting the API of the gist strategy translation from using
opclass to using opfamily+opcintype (commits c09e5a6a01,
622f678c10). For looking up the gist translation function, we used
the convention "amproclefttype = amprocrighttype = opclass's
opcintype" (see pg_amproc.h). But each operator family should only
have one translation function, and getting the right type for the
lookup is sometimes cumbersome and fragile, so this is all
unnecessarily complicated.
To simplify this, change the gist stategy support procedure to take
"any", "any" as argument. (This is arbitrary but seems intuitive.
The alternative of using InvalidOid as argument(s) upsets various DDL
commands, so it's not practical.) Then we don't need opcintype for
the lookup, and we can remove it from all the API layers introduced by
commit c09e5a6a01.
This also adds some more documentation about the correct signature of
the gist support function and adds more checks in gistvalidate().
This was previously underspecified. (It relied implicitly on
convention mentioned above.)
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
With \bind, \parse, \bind_named and \close, it is possible to issue
queries from psql using the extended protocol. However, it was not
possible to send these queries using libpq's pipeline mode. This
feature has two advantages:
- Testing. Pipeline tests were only possible with pgbench, using TAP
tests. It now becomes possible to have more SQL tests that are able to
stress the backend with pipelines and extended queries. More tests will
be added in a follow-up commit that were discussed on some other
threads. Some external projects in the community had to implement their
own facility to work around this limitation.
- Emulation of custom workloads, with more control over the actions
taken by a client with libpq APIs. It is possible to emulate more
workload patterns to bottleneck the backend with the extended query
protocol.
This patch adds six new meta-commands to be able to control pipelines:
* \startpipeline starts a new pipeline. All extended queries are queued
until the end of the pipeline are reached or a sync request is sent and
processed.
* \endpipeline ends an existing pipeline. All queued commands are sent
to the server and all responses are processed by psql.
* \syncpipeline queues a synchronisation request, without flushing the
commands to the server, equivalent of PQsendPipelineSync().
* \flush, equivalent of PQflush().
* \flushrequest, equivalent of PQsendFlushRequest()
* \getresults reads the server's results for the queries in a pipeline.
Unsent data is automatically pushed when \getresults is called. It is
possible to control the number of results read in a single meta-command
execution with an optional parameter, 0 means that all the results
should be read.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAO6_XqroE7JuMEm1sWz55rp9fAYX2JwmcP_3m_v51vnOFdsLiQ@mail.gmail.com
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Add support to pg_dump for dumping stats, and use that during
pg_upgrade so that statistics are transferred during upgrade. In most
cases this removes the need for a costly re-analyze after upgrade.
Some statistics are not transferred, such as extended statistics or
statistics with a custom stakind.
Now pg_dump accepts the options --schema-only, --no-schema,
--data-only, --no-data, --statistics-only, and --no-statistics; which
allow all combinations of schema, data, and/or stats. The options are
named this way to preserve compatibility with the previous
--schema-only and --data-only options.
Statistics are in SECTION_DATA, unless the object itself is in
SECTION_POST_DATA.
The stats are represented as calls to pg_restore_relation_stats() and
pg_restore_attribute_stats().
Author: Corey Huinker, Jeff Davis
Reviewed-by: Jian He
Discussion: https://postgr.es/m/CADkLM=fzX7QX6r78fShWDjNN3Vcr4PVAnvXxQ4DiGy6V=0bCUA@mail.gmail.com
Discussion: https://postgr.es/m/CADkLM%3DcB0rF3p_FuWRTMSV0983ihTRpsH%2BOCpNyiqE7Wk0vUWA%40mail.gmail.com
This commit adds a short description of what kind of activity is tracked
in pg_stat_io for the object "wal", with a link pointing to the section
"WAL configuration" that has a lot of details on the matter.
This should perhaps have been added in a051e71e28, but things are what
they are.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
Since a051e71e28, pg_stat_io is able to track statistics for the WAL
activity, providing an equivalent of pg_stat_wal with more granularity
for the fsyncs/writes counts and timings, as the data is split across
backend types.
This commit now recommends pg_stat_io rather than pg_stat_wal in the
section "WAL configuration", some of the latter's attributes being
candidate for removal in a follow-up commit.
Extracted from a larger patch by the same author.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
LIKE enables the creation of foreign tables based on the column
definitions, constraints and objects of the defined source relation(s).
This feature mirrors the behavior of CREATE TABLE LIKE, but ignores
the INCLUDING sub-options that do not make sense for foreign tables:
INDEXES, COMPRESSION, IDENTITY and STORAGE. The supported sub-options
are COMMENTS, CONSTRAINTS, DEFAULTS, GENERATED and STATISTICS, mapping
with the clauses already supported by the command.
Note that the restriction with LIKE in CREATE FOREIGN TABLE was added in
a0c6dfeecf.
Author: Zhang Mingli
Reviewed-by: Álvaro Herrera, Sami Imseih, Michael Paquier
Discussion: https://postgr.es/m/42d3f855-2275-4361-a42a-826172ca2dc4@Spark
This commit introduces idle_replication_slot_timeout GUC that allows
inactive slots to be invalidated at the time of checkpoint. Because
checkpoints happen checkpoint_timeout intervals, there can be some lag
between when the idle_replication_slot_timeout was exceeded and when the
slot invalidation is triggered at the next checkpoint. To avoid such lags,
users can force a checkpoint to promptly invalidate inactive slots.
Note that the idle timeout invalidation mechanism is not applicable for
slots that do not reserve WAL or for slots on the standby server that are
synced from the primary server (i.e., standby slots having 'synced' field
'true'). Synced slots are always considered to be inactive because they
don't perform logical decoding to produce changes.
The slots can become inactive for a long period if a subscriber is down
due to a system error or inaccessible because of network issues. If such a
situation persists, it might be more practical to recreate the subscriber
rather than attempt to recover the node and wait for it to catch up which
could be time-consuming.
Then, external tools could create replication slots (e.g., for migrations
or upgrades) that may fail to remove them if an error occurs, leaving
behind unused slots that take up space and resources. Manually cleaning
them up can be tedious and error-prone, and without intervention, these
lingering slots can cause unnecessary WAL retention and system bloat.
As the duration of idle_replication_slot_timeout is in minutes, any test
using that would be time-consuming. We are planning to commit a follow up
patch for tests by using the injection point framework.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB5716C131A7D80DAE8CB9E88794FC2@OS0PR01MB5716.jpnprd01.prod.outlook.com
It's been some time since we did this, partly because the upstream
snowball project hasn't formally tagged a new release since 2021.
The main motivation for doing it now is to absorb a bug fix
(their commit e322673a841d9abd69994ae8cd20e191090b6ef4), which
prevents a null pointer dereference crash if SN_create_env() gets
a malloc failure at just the wrong point. We'll patch the back
branches with only that change, but we might as well do the full
sync dance on HEAD.
Aside from a bunch of mostly-minor tweaks to existing stemmers, this
update adds a new stemmer for Estonian. It also removes the existing
stemmer for Romanian using ISO-8859-2 encoding. Upstream apparently
concluded that ISO-8859-2 doesn't provide an adequate representation
of some Romanian characters, and the UTF-8 implementation should be
used instead.
While at it, update the README's instructions for doing a sync,
which have not been adjusted during the addition of meson tooling.
Thanks to Maksim Korotkov for discovering the null-pointer
bug and submitting the fix to upstream snowball.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/1d1a46-67ab1000-21-80c451@83151435
During the pg_createsubscriber execution, it is possible that the required
WAL is removed from the primary/publisher node due to
'max_slot_wal_keep_size'.
This patch raises a WARNING during the '--dry-run' mode if the
'max_slot_wal_keep_size' is set to a non-default value on the
primary/publisher node.
Author: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/CAHv8Rj+deqsQXOMa7Tck8CBQUbsua=+4AuMVQ2=MPM0f-ZHbjA@mail.gmail.com
The Self-Join Elimination (SJE) feature removes an inner join of a plain
table to itself in the query tree if it is proven that the join can be
replaced with a scan without impacting the query result. Self-join and
inner relation get replaced with the outer in query, equivalence classes,
and planner info structures. Also, the inner restrictlist moves to the
outer one with the removal of duplicated clauses. Thus, this optimization
reduces the length of the range table list (this especially makes sense for
partitioned relations), reduces the number of restriction clauses and,
in turn, selectivity estimations, and potentially improves total planner
prediction for the query.
This feature is dedicated to avoiding redundancy, which can appear after
pull-up transformations or the creation of an EquivalenceClass-derived clause
like the below.
SELECT * FROM t1 WHERE x IN (SELECT t3.x FROM t1 t3);
SELECT * FROM t1 WHERE EXISTS (SELECT t3.x FROM t1 t3 WHERE t3.x = t1.x);
SELECT * FROM t1,t2, t1 t3 WHERE t1.x = t2.x AND t2.x = t3.x;
In the future, we could also reduce redundancy caused by subquery pull-up
after unnecessary outer join removal in cases like the one below.
SELECT * FROM t1 WHERE x IN
(SELECT t3.x FROM t1 t3 LEFT JOIN t2 ON t2.x = t1.x);
Also, it can drastically help to join partitioned tables, removing entries
even before their expansion.
The SJE proof is based on innerrel_is_unique() machinery.
We can remove a self-join when for each outer row:
1. At most, one inner row matches the join clause;
2. Each matched inner row must be (physically) the same as the outer one;
3. Inner and outer rows have the same row mark.
In this patch, we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x;
2. Add to the list above the baseretrictinfo of the inner table;
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables;
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove the
possibility of self-join elimination, the inner and outer clauses must
match exactly.
The relation replacement procedure is not trivial and is partly combined
with the one used to remove useless left joins. Tests covering this feature
were added to join.sql. Some of the existing regression tests changed due
to self-join removal logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Author: Alexander Kuzmenkov <a.kuzmenkov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Co-authored-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Simon Riggs <simon@2ndquadrant.com>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Hywel Carver <hywel@skillerwhale.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Michał Kłeczek <michal@kleczek.org>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
wal_buffers_full tracks the number of times WAL buffers become full,
giving hints to be able to tune the GUC wal_buffers.
Up to now, this information was only available in pg_stat_wal. With
this field available in WalUsage since eaf502747b, exposing it in
pg_stat_statements is straight-forward, and it offers more granularity
at query level.
pg_stat_statements does not need a version bump as one has been done in
commit cf54a2c002 for this development cycle.
Author: Bertrand Drouvot
Reviewed-by: Ilia Evdokimov
Discussion: https://postgr.es/m/Z6SOha5YFFgvpwQY@ip-10-97-1-34.eu-west-3.compute.internal
Commit bb8dff9995 added this information to the
pg_stat_progress_vacuum and pg_stat_progress_analyze system views.
This commit adds the same information to the output of VACUUM and
ANALYZE with the VERBOSE option and to the autovacuum logs.
Suggested-by: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/ZmaXmWDL829fzAVX%40ip-10-97-1-34.eu-west-3.compute.internal
Cipher Feedback Mode, CFB, is a self-synchronizing stream cipher which
is very similar to CBC performed in reverse. Since OpenSSL supports it,
we can easily plug it into the existing cipher selection code without
any need for infrastructure changes.
This patch was simultaneously submitted by Umar Hayat and Vladyslav
Nebozhyn, the latter whom suggested the feauture. The committed patch
is Umar's version.
Author: Umar Hayat <postgresql.wizard@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAPBGcbxo9ASzq14VTpQp3mnUJ5omdgTWUJOvWV0L6nNigWE5jw@mail.gmail.com
Remove (char *) casts around string functions where the arguments or
result already have the right type and the cast is useless (or worse,
potentially casts away a qualifier, but this doesn't appear to be the
case here).
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
This commit adds the amount of time spent sleeping due to
cost-based delay to the pg_stat_progress_vacuum and
pg_stat_progress_analyze system views. A new configuration
parameter named track_cost_delay_timing, which is off by default,
controls whether this information is gathered. For vacuum, the
reported value includes the sleep time of any associated parallel
workers. However, parallel workers only report their sleep time
once per second to avoid overloading the leader process.
Bumps catversion.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://postgr.es/m/ZmaXmWDL829fzAVX%40ip-10-97-1-34.eu-west-3.compute.internal
pgbench client-side data generation uses COPY FREEZE to load data for most
tables. COPY FREEZE isn't supported for partitioned tables and since pgbench
only supports partitioning pgbench_accounts, pgbench used a hard-coded check to
skip COPY FREEZE and use plain COPY for a partitioned pgbench_accounts.
If the user has manually partitioned one of the other pgbench tables, this
causes client-side data generation to error out with:
ERROR: cannot perform COPY FREEZE on a partitioned table
Fix this by limiting COPY FREEZE to ordinary tables (RELKIND_RELATION).
Author: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/flat/97f55fca-8a7b-4da8-b413-7d1c57010676%40postgrespro.ru
Aggressive vacuums must scan every unfrozen tuple in order to advance
the relfrozenxid/relminmxid. Because data is often vacuumed before it is
old enough to require freezing, relations may build up a large backlog
of pages that are set all-visible but not all-frozen in the visibility
map. When an aggressive vacuum is triggered, all of these pages must be
scanned. These pages have often been evicted from shared buffers and
even from the kernel buffer cache. Thus, aggressive vacuums often incur
large amounts of extra I/O at the expense of foreground workloads.
To amortize the cost of aggressive vacuums, eagerly scan some
all-visible but not all-frozen pages during normal vacuums.
All-visible pages that are eagerly scanned and set all-frozen in the
visibility map are counted as successful eager freezes and those not
frozen are counted as failed eager freezes.
If too many eager scans fail in a row, eager scanning is temporarily
suspended until a later portion of the relation. The number of failures
tolerated is configurable globally and per table.
To effectively amortize aggressive vacuums, we cap the number of
successes as well. Capping eager freeze successes also limits the amount
of potentially wasted work if these pages are modified again before the
next aggressive vacuum. Once we reach the maximum number of blocks
successfully eager frozen, eager scanning is disabled for the remainder
of the vacuum of the relation.
Original design idea from Robert Haas, with enhancements from
Andres Freund, Tomas Vondra, and me
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZF_KCzZuOrPrOqjGVe8iRVWEAJSpzMgRQs%3D5-v84cXUg%40mail.gmail.com
"I/O" seems more descriptive than "Asynchronous Behavior", given that some of
the GUCs in the section don't relate to anything asynchronous.
Most other abbreviations in the config sections are un-abbreviated, but
"Input/Output" seems less likely to be helpful than just IO or I/O.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/x3tlw2jk5gm3r3mv47hwrshffyw7halpczkfbk3peksxds7bvc@lguk43z3bsyq
Improve on e4c886519 so that the string "warn" appears in
the output when there's a problem, and not when there isn't.
This should silence noise I've been seeing in my buildfarm
warning scraper.
Try to make it absolutely plain that we don't retain the
originally specified time zone, only the UTC timestamp.
While at it, make glossary entries for "UTC" and "GMT".
Author: Robert Treat <rob@xzilla.net>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/173796426022.1064.9135167366862649513@wrigleys.postgresql.org
Backpatch-through: 13
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This didn't actually work: the COPY succeeds, but the FREEZE
optimization isn't applied. There doesn't seem to be an easy way
to support FREEZE on foreign tables, so let's follow the precedent
established by commit 5c9a5513a3 by raising an error early. This
is arguably a bug fix, but due to the lack of reports, the minimal
discussion on the mailing list, and the potential to break existing
scripts, I am not back-patching it for now.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0ujeNgKpE3OrLtR%3DeJGa5LkGMekFzQTwjgw%3DrzaLufQLQ%40mail.gmail.com
One way autovacuum chooses tables to vacuum is by comparing the
number of updated or deleted tuples with a value calculated using
autovacuum_vacuum_threshold and autovacuum_vacuum_scale_factor.
The threshold specifies the base value for comparison, and the
scale factor specifies the fraction of the table size to add to it.
This strategy ensures that smaller tables are vacuumed after fewer
updates/deletes than larger tables, which is reasonable in many
cases but can result in infrequent vacuums on very large tables.
This is undesirable for a couple of reasons, such as very large
tables incurring a huge amount of bloat between vacuums.
This new parameter provides a way to set a limit on the value
calculated with autovacuum_vacuum_threshold and
autovacuum_vacuum_scale_factor so that very large tables are
vacuumed more frequently. By default, it is set to 100,000,000
tuples, but it can be disabled by setting it to -1. It can also be
adjusted for individual tables by changing storage parameters.
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Joe Conway <mail@joeconway.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Reviewed-by: Vinícius Abrahão <vinnix.bsd@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Alena Rybakina <a.rybakina@postgrespro.ru>
Discussion: https://postgr.es/m/956435f8-3b2f-47a6-8756-8c54ded61802%40dalibo.com
Two links in the isn module documentation were pointing to tools
which had been moved, resulting in 404 error responses. Update
to the new URLs for the tools. The link to the Sequoia 2000 page
in the history section was no longer working, and since the page
is no longer available online update our link to point at the
paper instead which is on a stable URL.
These links exist in all versions of the documentation so backpatch
to all supported branches.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: charukiewicz@protonmail.com
Discussion: https://postgr.es/m/173679670185.705.8565555804465055355@wrigleys.postgresql.org
Backpatch-through: 13
It is possible for the inactive_since value of an invalid replication slot
to be updated multiple times, which is unexpected behavior like during the
release of the slot or at the time of restart. This is harmless because
invalid slots are not allowed to be accessed but it is not prudent to
update invalid slots. We are planning to invalidate slots due to other
reasons like idle time and it will look odd that the slot's inactive_since
displays the recent time in this field after invalidated due to idle time.
So, this patch ensures that the inactive_since field of slots is not
updated for invalid slots.
In the passing, ensure to use the same inactive_since time for all the
slots at restart while restoring them from the disk.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CABdArM7QdifQ_MHmMA=Cc4v8+MeckkwKncm2Nn6tX9wSCQ-+iw@mail.gmail.com
This commit adds WAL IO stats to both pg_stat_io view and per-backend IO
statistics (pg_stat_get_backend_io()). This change is possible since
f92c854cf4, as WAL IO is not counted in blocks in some code paths
where its stats data is measured (like WAL read in xlogreader.c).
IOContext gains IOCONTEXT_INIT and IOObject IOOBJECT_WAL, with the
following combinations allowed:
- IOOBJECT_WAL/IOCONTEXT_NORMAL is used to track I/O operations done on
already-created WAL segments.
- IOOBJECT_WAL/IOCONTEXT_INIT is used for tracking I/O operations done
when initializing WAL segments.
The core changes are done in pg_stat_io.c, backend statistics inherit
them. Backend statistics and pg_stat_io are now available for the WAL
writer, the WAL receiver and the WAL summarizer processes.
I/O timing data is controlled by the GUC track_io_timing, like the
existing data of pg_stat_io for consistency. The timings related to
IOOBJECT_WAL show up if the GUC is enabled (disabled by default).
Bump pgstats file version, due to the additions in IOObject and
IOContext, impacting the amount of data written for the fixed-numbered
IO stats kind in the pgstats file.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Nitin Jadhav, Amit Kapila, Michael
Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
For each Index AM, provide a mapping between operator strategies and
the system-wide generic concept of a comparison type. For example,
for btree, BTLessStrategyNumber maps to and from COMPARE_LT. Numerous
places in the planner and executor think directly in terms of btree
strategy numbers (and a few in terms of hash strategy numbers.) These
should be converted over subsequent commits to think in terms of
CompareType instead. (This commit doesn't make any use of this API
yet.)
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
Use <function> rather than <structname> in the <title> to be consistent
with how other functions in this module are documented. Also suffix the
function name with () for consistency.
Backpatch to v17 where pg_buffercache_evict was introduced.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAExHW5uKWH8CuZc9NCb8XxSQc6uzvACV0cScebm54kF763ERAw@mail.gmail.com
Backpatch-through: 17
The column added in commit e65dbc9927, pubgencols_type, was inconsistent
with the naming conventions of other columns in the pg_publication
catalog.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CALDaNm1u-ufVOW-RUsXSooqzkpohxfZYy=z78fbcr_9Pq5hbCg@mail.gmail.com
This commit adds four fields to the statistics of relations, aggregating
the amount of time spent for each operation on a relation:
- total_vacuum_time, for manual vacuum.
- total_autovacuum_time, for vacuum done by the autovacuum daemon.
- total_analyze_time, for manual analyze.
- total_autoanalyze_time, for analyze done by the autovacuum daemon.
This gives users the option to derive the average time spent for these
operations with the help of the related "count" fields.
Bump catalog version (for the catalog changes) and PGSTAT_FILE_FORMAT_ID
(for the additions in PgStat_StatTabEntry).
Author: Sami Imseih
Reviewed-by: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/CAA5RZ0uVOGBYmPEeGF2d1B_67tgNjKx_bKDuL+oUftuoz+=Y1g@mail.gmail.com
The installation documentation stated that using Meson is
experimental. But since this is the only way to build using Visual
Studio on Windows, this would imply that that whole build procedure is
experimental, which isn't true. So qualify this statement a bit more.
We keep the statement that Meson is experimental on other platforms,
since it doesn't have full, confirmed feature parity with the make
build system.
Author: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/a3e76618-4cb5-4d54-a71c-da4fb8ba571b@eisentraut.org
This practice avoids possible problems caused by non-default psql
options, such as disabling AUTOCOMMIT.
Author: Shinya Kato <Shinya11.Kato@oss.nttdata.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/96ff23a5d858ff72ca8e823a014d16fe@oss.nttdata.com
Backpatch-through: 13
Useful for caseless matching. Similar to LOWER(), but avoids edge-case
problems with using LOWER() for caseless matching.
For collations that support it, CASEFOLD() handles characters with
more than two case variations or multi-character case variations. Some
characters may fold to uppercase. The results of case folding are also
more stable across Unicode versions than LOWER() or UPPER().
Discussion: https://postgr.es/m/a1886ddfcd8f60cb3e905c93009b646b4cfb74c5.camel%40j-davis.com
Reviewed-by: Ian Lawrence Barwick
When using OpenSSL and/or the underlying operating system in FIPS
mode no non-FIPS certified crypto implementations should be used.
While that is already possible by just not invoking the built-in
crypto in pgcrypto, this adds a GUC which prohibit the code from
being called. This doesn't change the FIPS status of PostgreSQL
but can make it easier for sites which target FIPS compliance to
ensure that violations cannot occur.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Joe Conway <mail@joeconway.com>
Reviewed-by: Joe Conway <mail@joeconway.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/16b4a157-9ea1-44d0-b7b3-4c85df5de97b@joeconway.com
This adds a SQL callable function for reading and returning the status
of FIPS configuration of OpenSSL. If OpenSSL is operating with FIPS
enabled it will return true, otherwise false. As this adds a function
to the SQL file, bump the extension version to 1.4.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Joe Conway <mail@joeconway.com>
Discussion: https://postgr.es/m/8f979145-e206-475a-a31b-73c977a4134c@joeconway.com
Add a TAP test for sepgsql. This automates the previously required
manual setup before the test. The actual tests are still run by
pg_regress, as before, but now called from within the TAP Perl script.
The previous manual test script (test_sepgsql) is left in place, since
its purpose is (also) to test whether a running instance was properly
initialized for sepgsql. But it has been changed to call pg_regress
directly and no longer require make.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/651a5baf-5c45-4a5a-a202-0c8453a4ebf8@eisentraut.org
With deferred triggers, it is possible that the current role changes
between the time when the trigger is queued and the time it is
executed (for example, the triggering data modification could have
been executed in a SECURITY DEFINER function).
Up to now, deferred trigger functions would run with the current role
set to whatever was active at commit time. That does not matter for
foreign-key constraints, whose correctness doesn't depend on the
current role. But for user-written triggers, the current role
certainly can matter.
Hence, fix things so that AFTER triggers are fired under the role
that was active when they were queued, matching the behavior of
BEFORE triggers which would have actually fired at that time.
(If the trigger function is marked SECURITY DEFINER, that of course
overrides this, as it always has.)
This does not create any new security exposure: if you do DML on a
table owned by a hostile user, that user has always had various ways
to exploit your permissions, such as the aforementioned BEFORE
triggers, default expressions, etc. It might remove some security
exposure, because the old behavior could potentially expose some
other role besides the one directly modifying the table.
There was discussion of making a larger change, such as running as
the trigger's owner. However, that would break the common idiom of
capturing the value of CURRENT_USER in a trigger for auditing/logging
purposes. This change will make no difference in the typical scenario
where the current role doesn't change before commit.
Arguably this is a bug fix, but it seems too big a semantic change
to consider for back-patching.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/77ee784cf248e842f74588418f55c2931e47bd78.camel@cybertec.at
This feature was intentionally omitted when FKs were first implemented
for partitioned tables, and had been requested a few times; the
usefulness is clear.
Validation can happen for each partition individually, which is useful
to contain the number of locks held and the duration; or it can be
executed for the partitioning hierarchy as a single command, which
validates all child constraints that haven't been validated already.
This is also useful to implement NOT ENFORCED constraints on top.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96Bp=-ZwihPPtuaNX=SrZ0U6ZsXD3+fgARO0JuKa8v2jQ@mail.gmail.com
The current boolean publish_generated_columns option only supports a
binary choice, which is insufficient for future enhancements where
generated columns can be of different types (e.g., stored or virtual). The
supported values for the publish_generated_columns option are 'none' and
'stored'.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d718d219-dd47-4a33-bb97-56e8fc4da994@eisentraut.org
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
We've long had roman-numeral output support in to_char(),
but lacked the reverse conversion. Here it is.
Author: Hunaid Sohail <hunaidpgml@gmail.com>
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAMWA6ybh4M1VQqpmnu2tfSwO+3gAPeA8YKnMHVADeB=XDEvT_A@mail.gmail.com
For the purposes of this discussion, row_number() is just as good
as rank(), and its behavior is easier to understand and describe.
So let's switch the examples to using row_number().
Along the way to checking the results given in the tutorial,
I found it helpful to extract the empsalary table we use in the
regression tests, which is evidently the same data that was used
to make these results. So I shoved that into advanced.source
to improve the coverage of that file a little. (There's still
several pages of the tutorial that are not included in it,
but at least now 3.5 Window Functions is covered.)
Suggested-by: "David G. Johnston" <david.g.johnston@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/173737973383.1070.1832752929070067441@wrigleys.postgresql.org
The PG_UNICODE_FAST locale uses code point sort order (fast,
memcmp-based) combined with Unicode character semantics. The character
semantics are based on Unicode full case mapping.
Full case mapping can map a single codepoint to multiple codepoints,
such as "ß" uppercasing to "SS". Additionally, it handles
context-sensitive mappings like the "final sigma", and it uses
titlecase mappings such as "Dž" when titlecasing (rather than plain
uppercase mappings).
Importantly, the uppercasing of "ß" as "SS" is specifically mentioned
by the SQL standard. In Postgres, UCS_BASIC uses plain ASCII semantics
for case mapping and pattern matching, so if we changed it to use the
PG_UNICODE_FAST locale, it would offer better compliance with the
standard. For now, though, do not change the behavior of UCS_BASIC.
Discussion: https://postgr.es/m/ddfd67928818f138f51635712529bc5e1d25e4e7.camel@j-davis.com
Discussion: https://postgr.es/m/27bb0e52-801d-4f73-a0a4-02cfdd4a9ada@eisentraut.org
Reviewed-by: Peter Eisentraut, Daniel Verite
This topic wasn't really covered before, so fill in some details.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/90853055-5BBD-493D-91E5-721677C7C59B@gmail.com
Remove the flex version checks from configure and meson. The cutoff
versions are all so ancient that this is no longer relevant, and what
the actual cutoff should be is a bit fuzzy.
This also removes the ancient behavior that configure would also
accept a "lex" program if it is actuall flex. This aligns the check
with meson in this respect.
For future reference, as of this commit, these are relevant flex
versions:
- The hard required minimum is flex 2.5.34 as of commit b1ef48980d,
but this has not actually been tested.
- Prior to this, the minimum enforced by configure/meson was flex
2.5.35, which is the oldest present in the buildfarm right now.
- As of commit 6fdd5d9563, the oldest version that will compile
without warnings due to flex-generated code is flex 2.5.36.
- The oldest version that probably still has some practical relevance
is flex 2.5.37, which ships with CentOS/RHEL 7.
Discussion: https://www.postgresql.org/message-id/1a204ccd-7ae6-478c-a431-407b5c48ccc6@eisentraut.org
If a time zone abbreviation used in datetime input is defined in
the currently active timezone, use that definition in preference
to looking in the timezone_abbreviations list. That allows us to
correctly handle abbreviations that have different meanings in
different timezones. Also, it eliminates an inconsistency between
datetime input and datetime output: the non-ISO datestyles for
timestamptz have always printed abbreviations taken from the IANA
data, not from timezone_abbreviations. Before this fix, it was
possible to demonstrate cases where casting a timestamp to text
and back fails or changes the value significantly because of that
inconsistency.
While this change removes the ability to override the IANA data about
an abbreviation known in the current zone, it's not clear that there's
any real use-case for doing so. But it is clear that this makes life
a lot easier for dealing with abbreviations that have conflicts across
different time zones.
Also update the pg_timezone_abbrevs view to report abbreviations
that are recognized via the IANA data, and *not* report any
timezone_abbreviations entries that are thereby overridden.
Under the hood, there are now two SRFs, one that pulls the IANA
data and one that pulls timezone_abbreviations entries. They're
combined by logic in the view. This approach was useful for
debugging (since the functions can be called on their own).
While I don't intend to document the functions explicitly,
they might be useful to call directly.
Also improve DecodeTimezoneAbbrev's caching logic so that it can
cache zone abbreviations found in the IANA data. Without that,
this patch would have caused a noticeable degradation of the
runtime of timestamptz_in.
Per report from Aleksander Alekseev and additional investigation.
Discussion: https://postgr.es/m/CAJ7c6TOATjJqvhnYsui0=CO5XFMF4dvTGH+skzB--jNhqSQu5g@mail.gmail.com
This allows the RETURNING list of INSERT/UPDATE/DELETE/MERGE queries
to explicitly return old and new values by using the special aliases
"old" and "new", which are automatically added to the query (if not
already defined) while parsing its RETURNING list, allowing things
like:
RETURNING old.colname, new.colname, ...
RETURNING old.*, new.*
Additionally, a new syntax is supported, allowing the names "old" and
"new" to be changed to user-supplied alias names, e.g.:
RETURNING WITH (OLD AS o, NEW AS n) o.colname, n.colname, ...
This is useful when the names "old" and "new" are already defined,
such as inside trigger functions, allowing backwards compatibility to
be maintained -- the interpretation of any existing queries that
happen to already refer to relations called "old" or "new", or use
those as aliases for other relations, is not changed.
For an INSERT, old values will generally be NULL, and for a DELETE,
new values will generally be NULL, but that may change for an INSERT
with an ON CONFLICT ... DO UPDATE clause, or if a query rewrite rule
changes the command type. Therefore, we put no restrictions on the use
of old and new in any DML queries.
Dean Rasheed, reviewed by Jian He and Jeff Davis.
Discussion: https://postgr.es/m/CAEZATCWx0J0-v=Qjc6gXzR=KtsdvAE7Ow=D=mu50AgOe+pvisQ@mail.gmail.com
This enables SCRAM authentication for postgres_fdw when connecting to
a foreign server without having to store a plain-text password on user
mapping options.
This is done by saving the SCRAM ClientKey and ServeryKey from the
client authentication and using those instead of the plain-text
password for the server-side SCRAM exchange. The new foreign-server
or user-mapping option "use_scram_passthrough" enables this.
Co-authored-by: Matheus Alcantara <mths.dev@pm.me>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac@gmail.com
This changes commit 7406ab623f in that the gist strategy number
mapping support function is changed to use the CompareType enum as
input, instead of the "well-known" RT*StrategyNumber strategy numbers.
This is a bit cleaner, since you are not dealing with two sets of
strategy numbers. Also, this will enable us to subsume this system
into a more general system of using CompareType to define operator
semantics across index methods.
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
This allows "x" to be appended to any psql list-like meta-command,
forcing its output to be displayed in expanded mode. This improves
readability in cases where the output is very wide. For example,
"\dfx+" (or equivalently "\df+x") will produce a list of functions,
with additional details, in expanded mode.
This works with all \d* meta-commands, plus \l, \z, and \lo_list, with
the one exception that the expanded mode option "x" cannot be appended
to "\d" by itself, since "\dx" already means something else.
Dean Rasheed, reviewed by Greg Sabino Mullane.
Discussion: https://postgr.es/m/CAEZATCVXJk3KsmCncf7PAVbxdDAUDm3QzDgGT7mBYySWikuOYw@mail.gmail.com
This allows users to determine whether particular functions are
leakproof, and whether the underlying functions used by operators and
casts are leakproof. This is useful to determine whether indexes can
be used in queries on security barrier views or tables with row-level
security policies.
Yugo Nagata, reviewed by Erik Wienhold and Dean Rasheed.
Discussion: https://postgr.es/m/20240701220817.483f9b645b95611f8b1f65da%40sranhm.sraoss.co.jp
Currently in pg_stat_io view, IOs are counted as blocks of size
BLCKSZ. There are two limitations with this design:
* The actual number of I/O requests sent to the kernel is lower because
I/O requests may be merged before being sent. Additionally, it gives
the impression that all I/Os are done in block size, which shadows the
benefits of merging I/O requests.
* Some patches are under work to extend pg_stat_io for the tracking of
operations that may not be linked to the block size. For example, WAL
read IOs are done in variable bytes and it is not possible to correctly
show these IOs in pg_stat_io view, and we want to keep all this data in
a single system view rather than spread it across multiple relations to
ease monitoring.
WaitReadBuffers() can now be tracked as a single read operation
worth N blocks. Same for ExtendBufferedRelShared() and
ExtendBufferedRelLocal() for extensions.
Three columns are added to pg_stat_io for reads, writes and extensions
for the byte calculations. op_bytes, which was always hardcoded to
BLCKSZ, is removed. IO backend statistics are updated to reflect these
changes.
Bump catalog version.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ0oqxBaaHAEsj=xFqkzE3n5P=3RA1V_igXwL-RV7QRzyw@mail.gmail.com
This adds support for the NOT ENFORCED/ENFORCED flag for constraints,
with support for check constraints.
The plan is to eventually support this for foreign key constraints,
where it is typically more useful.
Note that CHECK constraints do not currently support ALTER operations,
so changing the enforceability of an existing constraint isn't
possible without dropping and recreating it. This could be added
later.
Author: Amul Sul <amul.sul@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
GUCs related to vacuum's freezing behavior were documented in a
subsection of the Client Connection Defaults documentation. These GUCs
don't belong there, as they affect the freezing behavior of all vacuums
-- including autovacuums.
There wasn't a clear alternative location, so this commit makes a new
"Server Configuration" docs subsection, "Vacuuming", with a subsection
for "Freezing". It also moves the "Automatic Vacuuming" subsection and
the docs on GUCs controlling cost-based vacuum delay under the new
"Vacuuming" subsection.
The other vacuum-related GUCs under the "Resource Consumption"
subsection have been left in their current location, as they seem to fit
there.
The GUCs' documentation was largely lifted and shifted. The only
modification made was the addition of a few missing <literal> tags.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_aQUOaMYrcjNuXeSkJtaX9oRUzKP57bsYbC0gVVWS%2BcbA%40mail.gmail.com
Harden hstore_plperl, hstore_plpython, and ltree_plpython
against search-path-based attacks by using @extschema:name@
notation to refer to the underlying hstore or ltree data type.
This allows removal of the previous documentation warning
suggesting that they must be installed in the same schema as
the underlying data type. In passing, also improve a para in
extend.sgml to suggest using @extschema:name@ for such purposes.
Discussion: https://postgr.es/m/692480.1736021695@sss.pgh.pa.us
The synchronous_standby_names GUC allows specifying num_sync,
the number of synchronous standbys transactions must wait for
replies from. This value must be an integer greater than zero.
This commit updates the documentation to clarify this requirement.
Reported-by: Asphator <asphator@gmail.com>
Discussion: https://postgr.es/m/18663-b02f75cb919f1b60@postgresql.org
This new parameter can be used to change the minimum allowed
password length (in bytes). Note that it has no effect if a user
supplies a pre-encrypted password.
Author: Emanuele Musella, Maurizio Boriani
Reviewed-by: Tomas Vondra, Bertrand Drouvot, Japin Li
Discussion: https://postgr.es/m/CA%2BugDNyYtHOtWCqVD3YkSVYDWD_1fO8Jm_ahsDGA5dXhbDPwrQ%40mail.gmail.com
Commit c758119e5b increased the default number of semaphores
required for autovacuum workers from 3 to 16. Unfortunately, some
systems have very low default settings for SEMMNS, and this change
moved the minimum required for Postgres well beyond that limit (see
commit 38da053463 for more details).
With this commit, initdb will lower the default value for
autovacuum_worker_slots as needed, just like it already does for
parameters such as max_connections and shared_buffers. We test
for (max_connections / 6) slots, which conveniently has the
following properties:
* For the initial max_connections default of 100, the default of
autovacuum_worker_slots will be 16, which is its initial default
value specified in the documentation and in guc_tables.c.
* For the lowest possible max_connections default of 25, the
default of autovacuum_worker_slots will be 4, which means we only
need one additional semaphore for autovacuum workers (as compared
to before commit c758119e5b). This leaves some wiggle room for
new auxiliary workers, etc. on systems with low SEMMNS, and it
ensures that the default number of slots will be greater than or
equal to the default value of autovacuum_max_workers (3).
Reported-by: Tom Lane
Suggested-by: Andres Freund
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1346002.1736198977%40sss.pgh.pa.us
This commit introduces a new parameter named
autovacuum_worker_slots that controls how many autovacuum worker
slots to reserve during server startup. Modifying this new
parameter's value does require a server restart, but it should
typically be set to the upper bound of what you might realistically
need to set autovacuum_max_workers. With that new parameter in
place, autovacuum_max_workers can now be changed with a SIGHUP
(e.g., pg_ctl reload).
If autovacuum_max_workers is set higher than
autovacuum_worker_slots, a WARNING is emitted, and the server will
only start up to autovacuum_worker_slots workers at a given time.
If autovacuum_max_workers is set to a value less than the number of
currently-running autovacuum workers, the existing workers will
continue running, but no new workers will be started until the
number of running autovacuum workers drops below
autovacuum_max_workers.
Reviewed-by: Sami Imseih, Justin Pryzby, Robert Haas, Andres Freund, Yogesh Sharma
Discussion: https://postgr.es/m/20240410212344.GA1824549%40nathanxps13
VERBOSE messages from ANALYZE, CLUSTER, REINDEX, and VACUUM are logged
at the INFO level, but this detail was missing from the documentation.
This commit updates the docs to mention the log level for these messages.
Author: Masahiro Ikeda
Reviewed-by: Yugo Nagata
Discussion: https://postgr.es/m/b4a4b7916982dccd9607c8efb3ce5116@oss.nttdata.com
Slightly faulty logic in the original jsonb code (commit d9134d0a35)
results in an empty top level array sorting less than a json null. We
can't change the sort order now since it would affect btree indexes over
jsonb, so document the anomaly.
Backpatch to all live branches (13 .. 17)
In master, also add a code comment noting the anomaly.
Reported-by: Yan Chengpen
Reviewed-by: Jian He
Discussion: https://postgr.es/m/OSBPR01MB45199DD8DA2D1CECD50518188E272@OSBPR01MB4519.jpnprd01.prod.outlook.com
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
As of HEAD this will leave us with four free semaphores (using the
default values for other relevant parameters such as max_wal_senders).
So we won't need to consider this again until we've invented five
more background processes. Maybe by then we can switch both these
platforms to some other semaphore API.
For the moment, do this only in master; there've not been field
complaints that might justify a back-patch.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
This adds a new variable-numbered statistics kind in pgstats, where the
object ID key of the stats entries is based on the proc number of the
backends. This acts as an upper-bound for the number of stats entries
that can exist at once. The entries are created when a backend starts
after authentication succeeds, and are removed when the backend exits,
making the stats entry exist for as long as their backend is up and
running. These are not written to the pgstats file at shutdown (note
that write_to_file is disabled, as a safety measure).
Currently, these stats include only information about the I/O generated
by a backend, using the same layer as pg_stat_io, except that it is now
possible to know how much activity is happening in each backend rather
than an overall aggregate of all the activity. A function called
pg_stat_get_backend_io() is added to access this data depending on the
PID of a backend. The existing structure could be expanded in the
future to add more information about other statistics related to
backends, depending on requirements or ideas.
Auxiliary processes are not included in this set of statistics. These
are less interesting to have than normal backends as they have dedicated
entries in pg_stat_io, and stats kinds of their own.
This commit includes also pg_stat_reset_backend_stats(), function able
to reset all the stats associated to a single backend.
Bump catalog version and PGSTAT_FILE_FORMAT_ID.
Author: Bertrand Drouvot
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Michael Paquier, Nazir
Bilal Yavuz
Discussion: https://postgr.es/m/ZtXR+CtkEVVE/LHF@ip-10-97-1-34.eu-west-3.compute.internal
This commit adds support for the following items in psql, able to show a
service name, when available:
- Variable SERVICE.
- Substitution %s in PROMPT{1,2,3}.
This relies on 4b99fed754, that has made the service name available in
PGconn for libpq.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discussion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
This commit adds one field to PGconn for the database service name (if
any), with PQservice() as routine to retrieve it. Like the other
routines of this area, NULL is returned as result if the connection is
NULL.
A follow-up patch will make use of this feature to be able to display
the service name in the psql prompt.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discusion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
Two places in the documentation suggest B-tree is the only index access
method allowing parallel builds. Commit b4375717 added parallel builds
for BRIN too, but failed to update the docs. So fix that, and backpatch
to 17, where parallel BRIN builds were introduced.
Author: Egor Rogov
Backpatch-through: 17
Discussion: https://postgr.es/m/114e2d5d-125e-07d8-94aa-5ad175fb7443@postgrespro.ru
The documentation in wal.sgml explains that old WAL files cannot be
removed or recycled until they are archived (when WAL archiving is used)
or replicated (when using replication slots). However, it did not mention
that, similarly, old WAL files are also kept until they are summarized
if WAL summarization is enabled. This commit adds that clarification
to the documentation.
Back-patch to v17 where WAL summarization was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/fd0eb0a5-f43b-4e06-b450-cbca011b6cff@oss.nttdata.com
This commit introduces the uuidv7() SQL function, which generates UUID
version 7 as specified in RFC 9652. UUIDv7 combines a Unix timestamp
in milliseconds and random bits, offering both uniqueness and
sortability.
In our implementation, the 12-bit sub-millisecond timestamp fraction
is stored immediately after the timestamp, in the space referred to as
"rand_a" in the RFC. This ensures additional monotonicity within a
millisecond. The rand_a bits also function as a counter. We select a
sub-millisecond timestamp so that it monotonically increases for
generated UUIDs within the same backend, even when the system clock
goes backward or when generating UUIDs at very high
frequency. Therefore, the monotonicity of generated UUIDs is ensured
within the same backend.
This commit also expands the uuid_extract_timestamp() function to
support UUID version 7.
Additionally, an alias uuidv4() is added for the existing
gen_random_uuid() SQL function to maintain consistency.
Bump catalog version.
Author: Andrey Borodin
Reviewed-by: Sergey Prokhorenko, Przemysław Sztoch, Nikolay Samokhvalov
Reviewed-by: Peter Eisentraut, Jelte Fennema-Nio, Aleksander Alekseev
Reviewed-by: Masahiko Sawada, Lukas Fittl, Michael Paquier, Japin Li
Reviewed-by: Marcos Pegoraro, Junwang Zhao, Stepan Neretin
Reviewed-by: Daniel Vérité
Discussion: https://postgr.es/m/CAAhFRxitJv%3DyoGnXUgeLB_O%2BM7J2BJAmb5jqAT9gZ3bij3uLDA%40mail.gmail.com
The topic of turning EXPLAIN's BUFFERS option on with the ANALYZE option
has come up a few times over the past few years. In many ways, doing this
seems like a good idea as it may be more obvious to users why a given
query is running more slowly than they might expect. Also, from my own
(David's) personal experience, I've seen users posting to the mailing
lists with two identical plans, one slow and one fast asking why their
query is sometimes slow. In many cases, this is due to additional reads.
Having BUFFERS on by default may help reduce some of these questions, and
if not, make it more obvious to the user before they post, or save a
round-trip to the mailing list when additional I/O effort is the cause of
the slowness.
The general consensus is that we want BUFFERS on by default with
ANALYZE. However, there were more than zero concerns raised with doing
so. The primary reason against is the additional verbosity, making it
harder to read large plans. Another concern was that buffer information
isn't always useful so may not make sense to have it on by default.
It's currently December, so let's commit this to see if anyone comes
forward with a strong objection against making this change. We have over
half a year remaining in the v18 cycle where we could still easily consider
reverting this if someone were to come forward with a convincing enough
reason as to why doing this is a bad idea.
There were two patches independently submitted to achieve this goal, one
by me and the other by Guillaume. This commit is a mix of both of these
patches with some additional work done by me to adjust various
additional places in the documentation which include EXPLAIN ANALYZE
output.
Author: Guillaume Lelarge, David Rowley
Reviewed-by: Robert Haas, Greg Sabino Mullane, Michael Christofides
Discussion: https://postgr.es/m/CANNMO++W7MM8T0KyXN3ZheXXt-uLVM3aEtZd+WNfZ=obxffUiA@mail.gmail.com
It looks like the example case was once modified to increase the number
of rows but the EXPLAIN ANALYZE output wasn't updated to reflect that.
Also adjust the text which discusses the index sizes. With the example
table size, the bloom index isn't quite 8 times more space efficient
than the btree indexes.
Discussion: https://postgr.es/m/CAApHDvovx8kQ0=HTt85gFDAwmTJHpCgiSvRmQZ_6u_g-vQYM_w@mail.gmail.com
Backpatch-through: 13, all supported versions
Ensure stored generated columns that are part of REPLICA IDENTITY must be
published explicitly for UPDATE and DELETE operations to be published. We
can publish generated columns by listing them in the column list or by
enabling the publish_generated_columns option.
This commit changes the behavior of the test added in commit adedf54e65 by
giving an ERROR for the UPDATE operation in such cases. There is no way to
trigger the bug reported in commit adedf54e65 but we didn't remove the
corresponding code change because it is still relevant when replicating
changes from a publisher with version less than 18.
We decided not to backpatch this behavior change to avoid the risk of
breaking existing output plugins that may be sending generated columns by
default although we are not aware of any such plugin. Also, we didn't see
any reports related to this on STABLE branches which is another reason not
to backpatch this change.
Author: Shlok Kyal, Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CANhcyEVw4V2Awe2AB6i0E5AJLNdASShGfdBLbUd1XtWDboymCA@mail.gmail.com
The last section of pg_createsubscriber used the terms
"publication-name", "replication-slot-name", and "subscription-name".
These terms are not defined on the page, which was confusing, and the
intention is clearly to refer to the values one would give to the
options --publication, --subscription and --replication-slot. Let's
simplify the documentation by mentioning the option switches, instead of
these terms.
Reported-by: Christophe Courtois
Author: Shubham Khanna
Reviewed-by: Vignesh C, Peter Smith
Discussion: https://postgr.es/m/173288198026.714.15127074046508836738@wrigleys.postgresql.org
Backpatch-through: 17
MD5 has been considered to be unsuitable for use as a cryptographic
hash algorithm for some time. Furthermore, MD5 password hashes in
PostgreSQL are vulnerable to pass-the-hash attacks, i.e., knowing
the username and hashed password is sufficient to authenticate.
The SCRAM-SHA-256 method added in v10 is not subject to these
problems and is considered to be superior to MD5.
This commit marks MD5 password support in PostgreSQL as deprecated
and to be removed in a future release. The documentation now
contains several deprecation notices, and CREATE ROLE and ALTER
ROLE now emit deprecation warnings when setting MD5 passwords. The
warnings can be disabled by setting the md5_password_warnings
parameter to "off".
Reviewed-by: Greg Sabino Mullane, Jim Nasby
Discussion: https://postgr.es/m/ZwbfpJJol7lDWajL%40nathan
Historically we tolerated the absence of various C runtime library
features for the benefit of the MinGW tool chain, because it used
ancient msvcrt.dll for a long period of time. It now uses ucrt by
default (like Windows 10+, Visual Studio 2015+), and that's the only
configuration we're testing.
In practice, we effectively required ucrt already in PostgreSQL 17, when
commit 8d9a9f03 required _create_locale etc, first available in
msvcr120.dll (Visual Studio 2013, the last of the pre-ucrt series of
runtimes), and for MinGW users that practically meant ucrt because it
was difficult or impossible to use msvcr120.dll. That may even not have
been the first such case, but old MinGW configurations had already
dropped off our testing radar so we weren't paying much attention.
This commit formalizes the requirement. It also removes a couple of
obsolete comments that discussed msvcrt.dll limitations, and some tests
of !defined(_MSC_VER) to imply msvcrt.dll. There are many more
anachronisms, but it'll take some time to figure out how to remove them
all. APIs affected relate to locales, UTF-8, threads, large files and
more.
Thanks to Peter Eisentraut for the documentation change. It's not
really necessary to talk about ucrt explicitly in such a short section,
since it's the default for MinGW-w64 and MSYS2. It's enough to prune
references and broken links to much older tools.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/d9e7731c-ca1b-477c-9298-fa51e135574a%40eisentraut.org
This allows for example using LIKE with case-insensitive collations.
There was previously no internal implementation of this, so it was met
with a not-supported error. This adds the internal implementation and
removes the error. The implementation follows the specification of
the SQL standard for this.
Unlike with deterministic collations, the LIKE matching cannot go
character by character but has to go substring by substring. For
example, if we are matching against LIKE 'foo%bar', we can't start by
looking for an 'f', then an 'o', but instead with have to find
something that matches 'foo'. This is because the collation could
consider substrings of different lengths to be equal. This is all
internal to MatchText() in like_match.c.
The changes in GenericMatchText() in like.c just pass through the
locale information to MatchText(), which was previously not needed.
This matches exactly Generic_Text_IC_like() below.
ILIKE is not affected. (It's unclear whether ILIKE makes sense under
nondeterministic collations.)
This also updates match_pattern_prefix() in like_support.c to support
optimizing the case of an exact pattern with nondeterministic
collations. This was already alluded to in the previous code.
(includes documentation examples from Daniel Vérité and test cases
from Paul A Jungwirth)
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/700d2e86-bf75-4607-9cf2-f5b7802f6e88@eisentraut.org
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
In commit 641a5b7a14, I removed "nbsp" characters from SVG files, not
realizing the SVG files were generated from GV files and that the "nbsp"
characters were caused by trailing ASCII spaces in GV files. This
commit restores the "nbsp" SVG characters and adds a GV comment about
how the trailing spaces cause the "nbsp" output.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/2c5dd601-b245-4092-9c27-6d1ad51609df%40eisentraut.org
Backpatch-through: master
The ordering of DISTINCT items is semantically insignificant, so we
can reorder them as needed. In fact, in the parser, we absorb the
sorting semantics of the sortClause as much as possible into the
distinctClause, ensuring that one clause is a prefix of the other.
This can help avoid a possible need to re-sort.
In this commit, we attempt to adjust the DISTINCT keys to match the
input path's pathkeys. This can likewise help avoid re-sorting, or
allow us to use incremental-sort to save efforts.
For DISTINCT ON expressions, the parser already ensures that they
match the initial ORDER BY expressions. When reordering the DISTINCT
keys, we must ensure that the resulting pathkey list matches the
initial distinctClause pathkeys.
This introduces a new GUC, enable_distinct_reordering, which allows
the optimization to be disabled if needed.
Author: Richard Guo
Reviewed-by: Andrei Lepikhov
Discussion: https://postgr.es/m/CAMbWs48dR26cCcX0f=8bja2JKQPcU64136kHk=xekHT9xschiQ@mail.gmail.com
Per PEP 3114, iterator.next() has been renamed to iterator.__next__(),
and one example in the documentation still used next(). This caused the
example provided to fail the function creation since Python 2 is not
supported anymore since 19252e8ec9.
Author: Erik Wienhold
Discussion: https://postgr.es/m/173209043143.2092749.13692266486972491694@wrigleys.postgresql.org
Backpatch-through: 15
Commit 4ac2a9bece introduced the REJECT_LIMIT option for the COPY
command. This commit extends the support for this option to file_fdw.
As well as REJECT_LIMIT option for COPY, this option limits
the maximum number of erroneous rows that can be skipped.
If the number of data type conversion errors exceeds this limit,
accessing the file_fdw foreign table will fail with an error,
even when on_error = 'ignore' is specified.
Since the CREATE/ALTER FOREIGN TABLE commands require foreign
table options to be single-quoted, this commit updates
defGetCopyRejectLimitOption() to handle also string value for them,
in addition to int64 value for COPY command option.
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Yugo Nagata, Kirill Reshke
Discussion: https://postgr.es/m/bab68a9fc502b12693f0755b6f35f327@oss.nttdata.com
Previously, database object statistics manipulation functions like
pg_set_relation_stats() reported unclear error and hint messages
when executed during recovery. These messages were "internal",
making it difficult for users to understand the issue:
ERROR: cannot acquire lock mode ShareUpdateExclusiveLock on database objects while recovery is in progress
HINT: Only RowExclusiveLock or less can be acquired on database objects during recovery.
This commit updates the error handling so that, if these functions
are called during recovery, they produce clearer messages:
ERROR: recovery is in progress
HINT: Statistics cannot be modified during recovery.
The related documentation has also been updated to explicitly
clarify that these functions are not available during recovery.
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas, Maxim Orlov
Discussion: https://postgr.es/m/6d313829-5f56-4a28-ae4b-bd01bf1ae791@oss.nttdata.com
Allowing foreign keys where the referenced and the referencing columns
have collations with different notions of equality is problematic.
This can only happen when using nondeterministic collations, for
example, if the referencing column is case-insensitive and the
referenced column is not, or vice versa. It does not happen if both
collations are deterministic.
To show one example:
CREATE COLLATION case_insensitive (provider = icu, deterministic = false, locale = 'und-u-ks-level2');
CREATE TABLE pktable (x text COLLATE "C" PRIMARY KEY);
CREATE TABLE fktable (x text COLLATE case_insensitive REFERENCES pktable ON UPDATE CASCADE ON DELETE CASCADE);
INSERT INTO pktable VALUES ('A'), ('a');
INSERT INTO fktable VALUES ('A');
BEGIN; DELETE FROM pktable WHERE x = 'a'; TABLE fktable; ROLLBACK;
BEGIN; DELETE FROM pktable WHERE x = 'A'; TABLE fktable; ROLLBACK;
Both of these DELETE statements delete the one row from fktable. So
this means that one row from fktable references two rows in pktable,
which should not happen. (That's why a primary key or unique
constraint is required on pktable.)
When nondeterministic collations were implemented, the SQL standard
available to yours truly said that referential integrity checks should
be performed with the collation of the referenced column, and so
that's how we implemented it. But this turned out to be a mistake in
the SQL standard, for the same reasons as above, that was later
(SQL:2016) fixed to require both collations to be the same. So that's
what we are aiming for here.
We don't have to be quite so strict. We can allow different
collations if they are both deterministic. This is also good for
backward compatibility.
So the new rule is that the collations either have to be the same or
both deterministic. Or in other words, if one of them is
nondeterministic, then both have to be the same.
Users upgrading from before that have affected setups will need to
make changes to their schemas (i.e., change one or both collations in
affected foreign-key relationships) before the upgrade will succeed.
Some of the nice test cases for the previous situation in
collate.icu.utf8.sql are now obsolete. They are changed to just check
the error checking of the new rule. Note that collate.sql already
contained a test for foreign keys with different deterministic
collations.
A bunch of code in ri_triggers.c that added a COLLATE clause to
enforce the referenced column's collation can be removed, because both
columns now have to have the same notion of equality, so it doesn't
matter which one to use.
Reported-by: Paul Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/78d824e0-b21e-480d-a252-e4b84bc2c24b@illuminatedcomputing.com
Many process environment variables (e.g. PATH), bypass the containment
expected of a trusted PL. Hence, trusted PLs must not offer features
that achieve setenv(). Otherwise, an attacker having USAGE privilege on
the language often can achieve arbitrary code execution, even if the
attacker lacks a database server operating system user.
To fix PL/Perl, replace trusted PL/Perl %ENV with a tied hash that just
replaces each modification attempt with a warning. Sites that reach
these warnings should evaluate the application-specific implications of
proceeding without the environment modification:
Can the application reasonably proceed without the modification?
If no, switch to plperlu or another approach.
If yes, the application should change the code to stop attempting
environment modifications. If that's too difficult, add "untie
%main::ENV" in any code executed before the warning. For example,
one might add it to the start of the affected function or even to
the plperl.on_plperl_init setting.
In passing, link to Perl's guidance about the Perl features behind the
security posture of PL/Perl.
Back-patch to v12 (all supported versions).
Andrew Dunstan and Noah Misch
Security: CVE-2024-10979
The GUC max_replication_slots has a different meaning for sending servers
and subscribers. Add cross-links in each section for easy reference.
Author: Tristan Partin
Discussion: https://postgr.es/m/D5FNEPMMFHFX.1OQBCML0TU5AH@partin.io
Two attributes are added to pg_stat_database:
* parallel_workers_to_launch, counting the total number of parallel
workers that were planned to be launched.
* parallel_workers_launched, counting the total number of parallel
workers actually launched.
The ratio of both fields can provide hints that there are not enough
slots available when launching parallel workers, also useful when
pg_stat_statements is not deployed on an instance (i.e. cf54a2c002).
This commit relies on de3a2ea3b2, that has added two fields to EState,
that get incremented when executing Gather or GatherMerge nodes.
A test is added in select_parallel, where parallel workers are spawned.
Bump catalog version.
Author: Benoit Lobréau
Discussion: https://postgr.es/m/783bc7f7-659a-42fa-99dd-ee0565644e25@dalibo.com
This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
We now create contype='n' pg_constraint rows for not-null constraints on
user tables. Only one such constraint is allowed for a column.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. These related constraints mostly
follow the well-known rules of conislocal and coninhcount that we have
for CHECK constraints, with some adaptations: for example, as opposed to
CHECK constraints, we don't match not-null ones by name when descending
a hierarchy to alter or remove it, instead matching by the name of the
column that they apply to. This means we don't require the constraint
names to be identical across a hierarchy.
The inheritance status of these constraints can be controlled: now we
can be sure that if a parent table has one, then all children will have
it as well. They can optionally be marked NO INHERIT, and then children
are free not to have one. (There's currently no support for altering a
NO INHERIT constraint into inheriting down the hierarchy, but that's a
desirable future feature.)
This also opens the door for having these constraints be marked NOT
VALID, as well as allowing UNIQUE+NOT NULL to be used for functional
dependency determination, as envisioned by commit e49ae8d3bc. It's
likely possible to allow DEFERRABLE constraints as followup work, as
well.
psql shows these constraints in \d+, though we may want to reconsider if
this turns out to be too noisy. Earlier versions of this patch hid
constraints that were on the same columns of the primary key, but I'm
not sure that that's very useful. If clutter is a problem, we might be
better off inventing a new \d++ command and not showing the constraints
in \d+.
For now, we omit these constraints on system catalog columns, because
they're unlikely to achieve anything.
The main difference to the previous attempt at this (b0e96f3119) is
that we now require that such a constraint always exists when a primary
key is in the column; we didn't require this previously which had a
number of unpalatable consequences. With this requirement, the code is
easier to reason about. For example:
- We no longer have "throwaway constraints" during pg_dump. We needed
those for the case where a table had a PK without a not-null
underneath, to prevent a slow scan of the data during restore of the
PK creation, which was particularly problematic for pg_upgrade.
- We no longer have to cope with attnotnull being set spuriously in
case a primary key is dropped indirectly (e.g., via DROP COLUMN).
Some bits of code in this patch were authored by Jian He.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: 何建 (jian he) <jian.universality@gmail.com>
Reviewed-by: 王刚 (Tender Wang) <tndrwang@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/202408310358.sdhumtyuy2ht@alvherre.pgsql
The previous wording is easy to read incorrectly; this change makes it
simpler, less ambiguous, and less prominent.
Backpatch to all live branches.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202411051201.zody6mld7vkw@alvherre.pgsql
This patch builds on the work done in commit 745217a051 by enabling the
replication of generated columns alongside regular column changes through
a new publication parameter: publish_generated_columns.
Example usage:
CREATE PUBLICATION pub1 FOR TABLE tab_gencol WITH (publish_generated_columns = true);
The column list takes precedence. If the generated columns are specified
in the column list, they will be replicated even if
'publish_generated_columns' is set to false. Conversely, if generated
columns are not included in the column list (assuming the user specifies a
column list), they will not be replicated even if
'publish_generated_columns' is true.
Author: Vignesh C, Shubham Khanna
Reviewed-by: Peter Smith, Amit Kapila, Hayato Kuroda, Shlok Kyal, Ajin Cherian, Hou Zhijie, Masahiko Sawada
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
This is difficult to maintain accurately, and it was probably already
somewhat incorrect, especially in the sql_drop and table_rewrite
categories.
The prior section already documented which DDL commands are *not*
supported (which was also slightly outdated), so let's expand that a
bit and just rely on that instead of listing out each command in full
detail.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxE_UAuxcM08BW5oVsg34v0cFWoEt8yBa5xSAoKLmL6LTQ%40mail.gmail.com
Sloppy refactoring in commit cca97ce6a caused these programs
to pass dbname = NULL to libpq if there was no "--dbname" switch
on the command line, where before "replication" would be passed.
This didn't break things completely, because the source server doesn't
care about the dbname specified for a physical replication connection.
However, it did cause libpq to fail to match a ~/.pgpass entry that
has "replication" in the dbname field. Restore the previous behavior
of passing "replication".
Also, closer inspection shows that if you do specify a dbname
in the connection string, that is what will be matched to ~/.pgpass,
not "replication". This was the pre-existing behavior so we should
not change it, but the SGML docs were pretty misleading about it.
Improve that.
Per bug #18685 from Toshi Harada. Back-patch to v17 where the
error crept in.
Discussion: https://postgr.es/m/18685-fee2dd142b9688f1@postgresql.org
Discussion: https://postgr.es/m/2702546.1730740456@sss.pgh.pa.us
"meson test" used to ignore the PG_TEST_EXTRA environment variable,
which meant that in order to run additional tests, you had to run
"meson setup -DPG_TEST_EXTRA=...". That's somewhat expensive, and not
consistent with autoconf builds. Allow PG_TEST_EXTRA environment
variable to override the setup-time option at run time, so that you
can do "PG_TEST_EXTRA=... meson test".
To implement this, the configuration time value is passed as an extra
"--pg-test-extra" argument to testwrap instead of adding it to the
test environment. If the environment variable is set at the time of
running test, testwrap uses the value from the environment variable
and ignores the --pg-test-extra option.
Now that "meson test" obeys the environment variable, we can remove it
from the "meson setup" steps in the CI script. It will now be picked
up from the environment variable like with "make check".
Author: Nazir Bilal Yavuzk, Ashutosh Bapat
Reviewed-by: Ashutosh Bapat with inputs from Tom Lane and Andrew Dunstan
Add README.non-ASCII to explain non-ASCII doc behavior; some text moved
from release.sgml.
Change UTF8 SGML characters to use HTML entities.
Remove unnecessary UTF8 spaces.
Add SVG file check for check-nbsp target.
Add dummy 'pdf' Makefile target.
Reported-by: Yugo Nagata
Discussion: https://postgr.es/m/20241011114122.c90f8a871462da36f2e2afeb@sraoss.co.jp
Backpatch-through: master
This function takes in input an array, and reverses the position of all
its elements. This operation only affects the first dimension of the
array, like array_shuffle().
The implementation structure is inspired by array_shuffle(), with a
subroutine called array_reverse_n() that may come in handy in the
future, should more functions able to reverse portions of arrays be
introduced.
Bump catalog version.
Author: Aleksander Alekseev
Reviewed-by: Ashutosh Bapat, Tom Lane, Vladlen Popolitov
Discussion: https://postgr.es/m/CAJ7c6TMpeO_ke+QGOaAx9xdJuxa7r=49-anMh3G5476e3CX1CA@mail.gmail.com
This commit allows logical replication to publish and replicate generated
columns when explicitly listed in the column list. We also ensured that
the generated columns were copied during the initial tablesync when they
were published.
We will allow to replicate generated columns even when they are not
specified in the column list (via a new publication option) in a separate
commit.
The motivation of this work is to allow replication for cases where the
client doesn't have generated columns. For example, the case where one is
trying to replicate data from Postgres to the non-Postgres database.
Author: Shubham Khanna, Vignesh C, Hou Zhijie
Reviewed-by: Peter Smith, Hayato Kuroda, Shlok Kyal, Amit Kapila
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
c01743aa4 and later 161320b4b adjusted the EXPLAIN output to show which
plan nodes were chosen despite being disabled by the various enable*
GUCs. Prior to e22253467, the disabledness of a node was only evident by
a large startup cost penalty. Since we now explicitly tag disabled nodes
with a boolean property in EXPLAIN, let's add some documentation to
provide some details about why and when disabled nodes can appear in the
plan.
Author: Laurenz Albe, David Rowley
Discussion: https://postgr.es/m/883729e429267214753d5e438c82c73a58c3db5d.camel@cybertec.at
There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f3, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
Disabling enable_indexscan has always also disabled Index Only Scans.
Here we make that more clear in the documentation in an attempt to
prevent future complaints complaining about this expected behavior.
Reported-by: Melanie Plageman
Author: David G. Johnston, David Rowley
Backpatch-through: 12, oldest supported version
Discussion: https://postgr.es/m/CAAKRu_atV=kovgpaLREyG68PB5+ncKvJ2UNoeRetEgyC3Yb5Sw@mail.gmail.com
Previously the default value of streaming option for a subscription was
'off'. The parallel option indicates that the changes in large
transactions (greater than logical_decoding_work_mem) are to be applied
directly via one of the parallel apply workers, if available.
The parallel mode was introduced in 16, but we refrain from enabling it by
default to avoid seeing any unpleasant behavior in the existing
applications. However we haven't found any such report yet, so this is a
good time to enable it by default.
Reported-by: Vignesh C
Author: Hayato Kuroda, Masahiko Sawada, Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm1=MedhW23NuoePJTmonwsMSp80ddsw+sEJs0GUMC_kqQ@mail.gmail.com
Clarify that altering the 'publish_via_partition_root' option can lead to
data loss or duplication when a partition root table is specified as the
replication target.
Reported-by: Maxim Boguk
Author: Hayato Kuroda
Reviewed-by: Amit Kapila, Peter Smith, Vignesh C
Discussion: https://postgr.es/m/18644-6866bbd22178ee16@postgresql.org
Similar to the pg_set_*_stats() functions, except with a variadic
signature that's designed to be more future-proof. Additionally, most
problems are reported as WARNINGs rather than ERRORs, allowing most
stats to be restored even if some cannot.
These functions are intended to be called from pg_dump to avoid the
need to run ANALYZE after an upgrade.
Author: Corey Huinker
Discussion: https://postgr.es/m/CADkLM=eErgzn7ECDpwFcptJKOk9SxZEk5Pot4d94eVTZsvj3gw@mail.gmail.com
The ssl_ciphers GUC can only set cipher suites for TLSv1.2, and lower,
connections. For TLSv1.3 connections a different OpenSSL API must be
used. This adds a new GUC, ssl_tls13_ciphers, which can be used to
configure a colon separated list of cipher suites to support when
performing a TLSv1.3 handshake.
Original patch by Erica Zhang with additional hacking by me.
Author: Erica Zhang <ericazhangy2021@qq.com>
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/tencent_063F89FA72CCF2E48A0DF5338841988E9809@qq.com
The ssl_ecdh_curve GUC only accepts a single value, but the TLS
handshake can list multiple curves in the groups extension (the
extension has been renamed to contain more than elliptic curves).
This changes the GUC to accept a colon-separated list of curves.
This commit also renames the GUC to ssl_groups to match the new
nomenclature for the TLS extension.
Original patch by Erica Zhang with additional hacking by me.
Author: Erica Zhang <ericazhangy2021@qq.com>
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/tencent_063F89FA72CCF2E48A0DF5338841988E9809@qq.com
Commit a70e01d430 retired support for OpenSSL 1.0.2 in order to get
rid of the need for manual initialization of the library. This left our
API usage compatible with 1.1.0 which was defined as the minimum required
version. Also mention that 3.4 is the minimum version required when using
LibreSSL.
An upcoming commit will introduce support for configuring TLSv1.3 cipher
suites which require an API call in OpenSSL 1.1.1 and onwards. In order
to support this setting this commit will set v1.1.1 as the new minimum
required version. The version-specific call for randomness init added
in commit c3333dbc0c is removed as it's no longer needed.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/909A668B-06AD-47D1-B8EB-A164211AAD16@yesql.se
Discussion: https://postgr.es/m/tencent_063F89FA72CCF2E48A0DF5338841988E9809@qq.com
This argument allow skipping throwing an error. Instead, the result status
can be obtained using pg_wal_replay_wait_status() function.
Catversion is bumped.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZtUF17gF0pNpwZDI%40paquier.xyz
Reviewed-by: Pavel Borisov
Enable manipulation of attribute statistics. Only superficial
validation is performed, so it's possible to add nonsense, and it's up
to the planner (or other users of statistics) to behave reasonably in
that case.
Bump catalog version.
Author: Corey Huinker
Discussion: https://postgr.es/m/CADkLM=eErgzn7ECDpwFcptJKOk9SxZEk5Pot4d94eVTZsvj3gw@mail.gmail.com
The present wording about viewing shared_memory_size_in_huge_pages
seems to suggest that the parameter cannot be viewed after startup
at all, whereas the intent is to make it clear that you can't use
"postgres -C" to view this parameter while the server is running.
This commit rephrases this section to remove the ambiguity.
Author: Seino Yuki
Reviewed-by: Michael Paquier, David G. Johnston, Fujii Masao
Discussion: https://postgr.es/m/420584fd274f9ec4f337da55ffb3b790%40oss.nttdata.com
Backpatch-through: 15
Generally, we don't want any overriding xreflabels in the options
list, so that we can link to options and the link renders as the
option name. The -g option did this differently and config.sgml made
use of that for a link. The new --no-data-checksums option (commit
983a588e0b) apparently copied this pattern, but that seems like the
wrong direction, as a future patch revealed.
To fix, remove the two xreflabels and rewrite the link in config.sgml
with an explicit link text.
This module provides SQL functions that allow to inspect logical
decoding components.
It currently allows to inspect the contents of serialized logical
snapshots of a running database cluster, which is useful for debugging
or educational purposes.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila, Shveta Malik, Peter Smith, Peter Eisentraut
Reviewed-by: David G. Johnston
Discussion: https://postgr.es/m/ZscuZ92uGh3wm4tW%40ip-10-97-1-34.eu-west-3.compute.internal
When answering support questions online it's helpful to be able to
refer to the specific format by using an anchored link.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87edatit3t.fsf@wibble.ilmari.org
This function returns the name, size, and last modification time of
each regular file in pg_wal/summaries. This allows administrators
to grant privileges to view the contents of this directory without
granting privileges on pg_ls_dir(), which allows listing the
contents of many other directories. This commit also gives the
pg_monitor predefined role EXECUTE privileges on the new
pg_ls_summariesdir() function.
Bumps catversion.
Author: Yushi Ogiwara
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/a0a3af15a9b9daa107739eb45aa9a9bc%40oss.nttdata.com
The view pg_stat_statements gains two columns:
- parallel_workers_to_launch, the number of parallel workers planned to
be launched.
- parallel_workers_launched, the number of parallel workers actually
launched.
The ratio of both columns offers hints that parallel workers are lacking
on a per-statement basis, requiring some tuning, in coordination with
"calls", the number of times a query is executed.
As of now, these numbers are tracked within Gather and GatherMerge
nodes. They could be extended to utilities that make use of parallel
workers (parallel btree and brin, VACUUM).
The module is bumped to 1.12.
Author: Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeWtTGOK0UgKXdDGpfTVSa5bd_VbUt6K6xn8P7X+_dZqKw@mail.gmail.com
There were multiple instances where accidentally adding non-breaking
space (nbsp, U+00A0, 0xc2a0 in UTF-8) to sgml files. This commit adds
additional checking to detect nbsp. You can check the nbsp by:
make -C doc/src/sgml check
or
make -C doc/src/sgml check-nbsp
Authors: Yugo Nagata, Daniel Gustafsson
Reviewed-by: Tatsuo Ishii, Daniel Gustafsson
Discussion: https://postgr.es/m/20240930.153404.202479334310259810.ishii%40postgresql.org
Previously, when ON_ERROR was set to 'ignore', the COPY command
would skip all rows with data type conversion errors, with no way to
limit the number of skipped rows before failing.
This commit introduces the REJECT_LIMIT option, allowing users to
specify the maximum number of erroneous rows that can be skipped.
If more rows encounter data type conversion errors than allowed by
REJECT_LIMIT, the COPY command will fail with an error, even when
ON_ERROR = 'ignore'.
Author: Atsushi Torikoshi
Reviewed-by: Junwang Zhao, Kirill Reshke, jian he, Fujii Masao
Discussion: https://postgr.es/m/63f99327aa6b404cc951217fa3e61fe4@oss.nttdata.com
The documentation was rather sparse on this matter and there is no
extension in-core that shows how to do it. Adding a small example will
hopefully help newcomers. An advantage of writing things this way is
that the contents are not going to rot because of backend changes.
Author: Phil Eaton
Reviewed-by: Robert Haas, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAByiw+r+CS-ojBDP7Dm=9YeOLkZTXVnBmOe_ajK=en8C_zB3_g@mail.gmail.com
In v17, the on_error and log_verbosity options were introduced for
the COPY command. This commit extends support for these options
to file_fdw.
Setting on_error = 'ignore' for a file_fdw foreign table allows users
to query it without errors, even when the input file contains
malformed rows, by skipping the problematic rows.
Both on_error and log_verbosity options apply to SELECT and ANALYZE
operations on file_fdw foreign tables.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/ab59dad10490ea3734cf022b16c24cfd@oss.nttdata.com
Previously, when the on_error option was set to ignore, the COPY command
would always log NOTICE messages for input rows discarded due to
data type incompatibility. Users had no way to suppress these messages.
This commit introduces a new log_verbosity setting, 'silent',
which prevents the COPY command from emitting NOTICE messages
when on_error = 'ignore' is used, even if rows are discarded.
This feature is particularly useful when processing malformed files
frequently, where a flood of NOTICE messages can be undesirable.
For example, when frequently loading malformed files via the COPY command
or querying foreign tables using file_fdw (with an upcoming patch to
add on_error support for file_fdw), users may prefer to suppress
these messages to reduce log noise and improve clarity.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/ab59dad10490ea3734cf022b16c24cfd@oss.nttdata.com
The following commands were allowed on partitioned tables, with
different effects:
1) ALTER TABLE SET [UN]LOGGED did not issue an error, and did not update
pg_class.relpersistence.
2) CREATE UNLOGGED TABLE was working with pg_class.relpersistence marked
as initially defined, but partitions did not inherit the UNLOGGED
property, which was confusing.
This commit causes the commands mentioned above to fail for partitioned
tables, instead.
pg_dump is tweaked so as partitioned tables marked as UNLOGGED ignore
the option when dumped from older server versions. pgbench needs a
tweak for --unlogged and --partitions=N to ignore the UNLOGGED option on
the partitioned tables created, its partitions still being unlogged.
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/ZiiyGFTBNkqcMQi_@paquier.xyz
Various improvements to the documentation like adding missing
markup, improving punctuation, ensuring consistent spelling of
words and minor wordsmithing.
Author: Oleg Sibiryakov <o.sibiryakov@postgrespro.ru>
Discussion: https://postgr.es/m/b7d0a03c-107e-48c7-a5c9-2c6f73cdf78f@postgrespro.ru
The login event trigger is not listed on the trigger firing matrix
since it's not fired by a command. Add a link to the example code
page similar to how the other event triggers link to the matrix.
Reported-by: Marcos Pegoraro <marcos@f10.com.br>
Discussion: https://postgr.es/m/CAB-JLwYS+78rX02BZ3wJ9ykVrd2i3O1K+7jzvZKQ0evquyQiLQ@mail.gmail.com
Previously, the pg_stat_checkpointer view and the checkpoint completion
log message could show different numbers for buffers written
during checkpoints. The view only counted shared buffers,
while the log message included both shared and SLRU buffers,
causing inconsistencies.
This commit resolves the issue by updating both the view and the log message
to separately report shared and SLRU buffers written during checkpoints.
A new slru_written column is added to the pg_stat_checkpointer view
to track SLRU buffers, while the existing buffers_written column now
tracks only shared buffers. This change would help users distinguish
between the two types of buffers, in the pg_stat_checkpointer view and
the checkpoint complete log message, respectively.
Bump catalog version.
Author: Nitin Jadhav
Reviewed-by: Bharath Rupireddy, Michael Paquier, Kyotaro Horiguchi, Robert Haas
Reviewed-by: Andres Freund, vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CAMm1aWb18EpT0whJrjG+-nyhNouXET6ZUw0pNYYAe+NezpvsAA@mail.gmail.com
The fork name is always separated with the block number by an underscore
in the names of the files generated, but the docs stuck them together
without a separator, which was confusing.
Author: Christoph Berg
Discussion: https://postgr.es/m/ZvxtSLiix9eceMRM@msg.df7cb.de
Backpatch-through: 16
The documentation for the connection service file was mentioning
the environment variable early but not the connection string key
word until the last sentence and only then in an example. This
adds the keyword in the first paragraph to make it clearer
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87r09ibpke.fsf@wibble.ilmari.org
There were unnecessary non-breaking spaces (nbsp, U+00A0, 0xc2a0 in
UTF-8) in the docs. This commit replaces them with ASCII spaces
(0x20).
config.sgml is backpatched through 17.
ref/drop_extension.sgml is backpatched through 13.
Discussion: https://postgr.es/m/20240930.153404.202479334310259810.ishii%40postgresql.org
Reviewed-by: Yugo Nagata, Daniel Gustafsson
Backpatch-through: 17, 13
Since backslash is (typically) not special in CSV data, we should
not be treating \. as special either. The server historically did
this to keep CSV and TEXT modes more alike and to support V2 protocol;
but V2 protocol is long dead, and the inconsistency with CSV standards
is annoying. Remove that behavior in CopyReadLineText, and make some
minor consequent code simplifications.
On the client side, we need to fix psql so that it does not check
for \. except when reading data from STDIN (that is, the script
source). We must do that regardless of TEXT/CSV mode or there is
no way to end the COPY short of script EOF. Also, be careful
not to send the \. to the server in that case.
This is a small compatibility break in that other applications
beside psql may need similar adjustment. Also, using an older
version of psql with a v18 server may result in misbehavior
during CSV-mode COPY IN.
Daniel Vérité, reviewed by vignesh C, Robert Haas, and myself
Discussion: https://postgr.es/m/ed659f37-a9dd-42a7-82b9-0da562cc4006@manitou-mail.org
This commit updates the documentation for the pg_stat_checkpointer view
to clarify what kind of checkpoints or restartpoints each counter tracks.
This makes it easier to understand the meaning of each counter.
Previously, the num_requested description included "backend,"
which could be misleading since requests come from other sources as well.
This commit also removes "backend" from the description of num_requested,
to avoid confusion.
Author: Fujii Masao
Reviewed-by: Anton A. Melnikov
Discussion: https://postgr.es/m/4640258e-d959-4cf0-903c-cd02389c3e05@oss.nttdata.com
This restriction seems to have come about due to some fuzzy thinking: in
commit 9139aa1942 we were adding a restriction against ADD constraint
ONLY on partitioned tables (which is sensible) and apparently we thought
the DROP case had to be symmetrical. However, it isn't, and the
comments about it are mistaken about the effect it would have. Remove
this limitation.
There have been no reports of users bothered by this limitation, so I'm
not backpatching it just yet. We can revisit this decision later, as needed.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202409261752.nbvlawkxsttf@alvherre.pgsql
Discussion: https://postgr.es/m/7682253a-6f79-6a92-00aa-267c4c412870@lab.ntt.co.jp
(about commit 9139aa1942, previously not registered)
Checkpoints can be skipped when the server is idle. The existing num_timed and
num_requested counters in pg_stat_checkpointer track both completed and
skipped checkpoints, but there was no way to count only the completed ones.
This commit introduces the num_done counter, which tracks only completed
checkpoints, making it easier to see how many were actually performed.
Bump catalog version.
Author: Anton A. Melnikov
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/9ea77f40-818d-4841-9dee-158ac8f6e690@oss.nttdata.com
Since v17, CREATE MATERIALIZED VIEW has set search_path to
"pg_catalog, pg_temp" while running the query. The docs for the
other commands that restrict search_path mention it, but the page
for CREATE MATERIALIZED VIEW does not. Fix that.
Oversight in commit 4b74ebf726.
Author: Yugo Nagata
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240805160502.d2a4975802a832b1e04afb80%40sraoss.co.jp
Backpatch-through: 17
This also works for compressed tar-format backups. However, -n must be
used, because we use pg_waldump to verify WAL, and it doesn't yet know
how to verify WAL that is stored inside of a tarfile.
Amul Sul, reviewed by Sravan Kumar and by me, and revised by me.
int_to_roman() only accepts plain "int" input, which is fine since
we're going to produce '###############' for any value above 3999
anyway. However, the numeric and int8 variants of to_char() would
throw an error if the given input exceeded the integer range, while
the float-input variants invoked undefined-per-C-standard behavior.
Fix things so that you uniformly get '###############' for out of
range input.
Also add test cases covering this code, plus the equally-untested
EEEE, V, and PL format codes.
Discussion: https://postgr.es/m/2956175.1725831136@sss.pgh.pa.us
Since autovacuum does not trigger an ANALYZE for partitioned tables,
users must perform these manually. However, performing a manual ANALYZE
on a partitioned table would always result in recursively analyzing each
partition and that could be undesirable as autovacuum takes care of that.
For partitioned tables that contain a large number of partitions, having
to analyze each partition could take an unreasonably long time, especially
so for tables with a large number of columns.
Here we allow the ONLY keyword to prefix the name of the table to allow
users to have ANALYZE skip processing partitions. This option can also
be used with VACUUM, but there is no work to do if VACUUM ONLY is used on
a partitioned table.
This commit also changes the behavior of VACUUM and ANALYZE for
inheritance parents. Previously inheritance child tables would not be
processed when operating on the parent. Now, by default we *do* operate
on the child tables. ONLY can be used to obtain the old behavior.
The release notes should note this as an incompatibility. The default
behavior has not changed for partitioned tables as these always
recursively processed the partitions.
Author: Michael Harris <harmic@gmail.com>
Discussion: https://postgr.es/m/CADofcAWATx_haD=QkSxHbnTsAe6+e0Aw8Eh4H8cXyogGvn_kOg@mail.gmail.com
Discussion: https://postgr.es/m/CADofcAXVbD0yGp_EaC9chmzsOoSai3jcfBCnyva3j0RRdRvMVA@mail.gmail.com
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
FYI, during PDF builds, this link type generates a "Unresolved ID
reference found" warning because it is suppressed from the PDF output.
Backpatch-through: 12
The previous documentation stated that num_timed reflects the number of
scheduled checkpoints performed. However, checkpoints may be skipped
if the server has been idle, and num_timed counts both skipped and completed
checkpoints. This commit clarifies the description to make it clear that
the counter includes both skipped and completed checkpoints.
Back-patch to v17 where pg_stat_checkpointer was added.
Author: Fujii Masao
Reviewed-by: Alexander Korotkov
Discussion: https://postgr.es/m/9ea77f40-818d-4841-9dee-158ac8f6e690@oss.nttdata.com
This commit adds a "user_name" output column to
the postgres_fdw_get_connections function, returning the name
of the local user mapped to the foreign server for each connection.
If a public mapping is used, it returns "public."
This helps identify postgres_fdw connections more easily,
such as determining which connections are invalid, closed,
or used within the current transaction.
No extension version bump is needed, as commit c297a47c5f
already handled it for v18~.
Author: Hayato Kuroda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/b492a935-6c7e-8c08-e485-3c1d64d7d10f@oss.nttdata.com
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
* Rename $node_standby1 to $node_standby in 043_wal_replay_wait.pl as there
is only one standby.
* Remove useless debug printing in 043_wal_replay_wait.pl.
* Fix typo in one check description in 043_wal_replay_wait.pl.
* Fix some wording in comments and documentation.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/1d7b08f2-64a2-77fb-c666-c9a74c68eeda%40gmail.com
Reviewed-by: Alexander Lakhin
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
(previously committed as 34768ee361, reverted by 8aee330af55; this is
essentially unchanged from those)
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
(previously committed as 46a0cd4cef, reverted by 46a0cd4cefb; the new
part is this:)
Because 'empty' && 'empty' is false, the temporal PK/UQ constraint
allowed duplicates, which is confusing to users and breaks internal
expectations. For instance, when GROUP BY checks functional
dependencies on the PK, it allows selecting other columns from the
table, but in the presence of duplicate keys you could get the value
from any of their rows. So we need to forbid empties.
This all means that at the moment we can only support ranges and
multiranges for temporal PK/UQs, unlike the original patch (above).
Documentation and tests for this are added. But this could
conceivably be extended by introducing some more general support for
the notion of "empty" for other types.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
(previously committed as 6db4598fcb, reverted by 8aee330af55; this is
essentially unchanged from those)
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
A number of pg_upgrade steps require connecting to every database
in the cluster and running the same query in each one. When there
are many databases, these steps are particularly time-consuming,
especially since they are performed sequentially, i.e., we connect
to a database, run the query, and process the results before moving
on to the next database.
This commit introduces a new framework that makes it easy to
parallelize most of these once-in-each-database tasks by processing
multiple databases concurrently. This framework manages a set of
slots that follow a simple state machine, and it uses libpq's
asynchronous APIs to establish the connections and run the queries.
The --jobs option is used to determine the number of slots to use.
To use this new task framework, callers simply need to provide the
query and a callback function to process its results, and the
framework takes care of the rest. A more complete description is
provided at the top of the new task.c file.
None of the eligible once-in-each-database tasks are converted to
use this new framework in this commit. That will be done via
several follow-up commits.
Reviewed-by: Jeff Davis, Robert Haas, Daniel Gustafsson, Ilya Gladyshev, Corey Huinker
Discussion: https://postgr.es/m/20240516211638.GA1688936%40nathanxps13
Historically we've used timezone "PST8PDT", but the recent release
2024b of tzdb changes the definition of that zone in a way that
breaks many test cases concerned with dates before 1970. Although
we've not yet adopted 2024b into our own tree, this is already
problematic for people using --with-system-tzdata if their platform
has already adopted 2024b. To work with both older and newer
versions of tzdb, switch to using "America/Los_Angeles", accepting
the ensuing changes in regression test results.
Back-patch to all supported branches.
Per report and patch from Wolfgang Walther.
Discussion: https://postgr.es/m/0a997455-5aba-4cf2-a354-d26d8bcbfae6@technowledgy.de
Commit e6c45d85dc fixed the behavior of JSON_QUERY() when WITH
CONDITIONAL WRAPPER is used, but the documentation example wasn't
updated to reflect this change. This commit updates the example to
show the correct result.
Per off-list report from Andreas Ulbrich.
Backpatch-through: 17
Discussion of commit ed055d249 revealed that we don't actually
want jsonpath's .string() method to depend on DateStyle, nor
TimeZone either, because the non-"_tz" jsonpath functions are
supposed to be immutable. Potentially we could allow a TimeZone
dependency in the "_tz" variants, but it seems better to just
uniformly define this method as returning the same string that
jsonb text output would do. That's easier to implement too,
saving a couple dozen lines.
Patch by me, per complaint from Peter Eisentraut. Back-patch
to v17 where this feature came in (in 66ea94e8e). Also
back-patch ed055d249 to provide test cases.
Discussion: https://postgr.es/m/5e8879d0-a3c8-4be2-950f-d83aa2af953a@eisentraut.org
This function checks whether a user has specific privileges on a large object,
identified by OID. The user can be provided by name, OID,
or default to the current user. If the specified large object doesn't exist,
the function returns NULL. It raises an error for a non-existent user name.
This behavior is basically consistent with other privilege inquiry functions
like has_table_privilege.
Bump catalog version.
Author: Yugo Nagata
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20240702163444.ab586f6075e502eb84f11b1a@sranhm.sraoss.co.jp
A few recent JSON aggregates have been added without much consideration
to the existing order. Put these back in alphabetical order (with the
exception of the JSONB variant of each JSON aggregate).
Author: Wolfgang Walther <walther@technowledgy.de>
Reviewed-by: Marlene Reiterer <marlene.reiterer.03@gmail.com>
Discussion: https://postgr.es/m/6a7b910c-3feb-4006-b817-9b4759cb6bb6%40technowledgy.de
Backpatch-through: 16, where these aggregates were added
Point out that the output format depends on DateStyle, and test that,
along with testing some cases previously not covered.
In passing, adjust the horology test to verify that the prevailing
DateStyle is 'Postgres, MDY', much as it has long verified the
prevailing TimeZone. We expect pg_regress to have set these up,
and there are multiple regression tests relying on these settings.
Also make the formatting of entries in table 9.50 more consistent.
David Wheeler (marginal additional hacking by me); review by jian he
Discussion: https://postgr.es/m/56955B33-6959-4FDA-A459-F00363ECDFEE@justatheory.com
The only current implementation is for btree where it calls
_bt_getrootheight(). Other index types can now also use this to pass
information to their amcostestimate routine. Previously, btree was
hardcoded and other index types could not hook into the optimizer at
this point.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
SPI_connect/SPI_connect_ext have not returned any value other than
SPI_OK_CONNECT since commit 1833f1a1c in v10; any errors are thrown
via ereport. (The most likely failure is out-of-memory, which has
always been thrown that way, so callers had better be prepared for
such errors.) This makes it somewhat pointless to check these
functions' result, and some callers within our code haven't been
bothering; indeed, the only usage example within spi.sgml doesn't
bother. So it's likely that the omission has propagated into
extensions too.
Hence, let's standardize on not checking, and document the return
value as historical, while not actually changing these functions'
behavior. (The original proposal was to change their return type
to "void", but that would needlessly break extensions that are
conforming to the old practice.) This saves a small amount of
boilerplate code in a lot of places.
Stepan Neretin
Discussion: https://postgr.es/m/CAMaYL5Z9Uk8cD9qGz9QaZ2UBJFOu7jFx5Mwbznz-1tBbPDQZow@mail.gmail.com
The existing function PQprotocolVersion() does not include the minor
version of the protocol. In preparation for pending work that will
bump that number for the first time, add a new function to provide it
to clients that may care, using the (major * 10000 + minor)
convention already used by PQserverVersion().
Jacob Champion based on earlier work by Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAOYmi+mM8+6Swt1k7XsLcichJv8xdhPnuNv7-02zJWsezuDL+g@mail.gmail.com
This commit adds columns in view pg_stat_subscription_stats to show the
number of times a particular conflict type has occurred during the
application of logical replication changes. The following columns are
added:
confl_insert_exists:
Number of times a row insertion violated a NOT DEFERRABLE unique
constraint.
confl_update_origin_differs:
Number of times an update was performed on a row that was
previously modified by another origin.
confl_update_exists:
Number of times that the updated value of a row violates a
NOT DEFERRABLE unique constraint.
confl_update_missing:
Number of times that the tuple to be updated is missing.
confl_delete_origin_differs:
Number of times a delete was performed on a row that was
previously modified by another origin.
confl_delete_missing:
Number of times that the tuple to be deleted is missing.
The update_origin_differs and delete_origin_differs conflicts can be
detected only when track_commit_timestamp is enabled.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Peter Smith, Anit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57160A07BD575773045FC214948F2@OS0PR01MB5716.jpnprd01.prod.outlook.com
OpenSSL 1.0.2 has been EOL from the upstream OpenSSL project for
some time, and is no longer the default OpenSSL version with any
vendor which package PostgreSQL. By retiring support for OpenSSL
1.0.2 we can remove a lot of no longer required complexity for
managing state within libcrypto which is now handled by OpenSSL.
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
Discussion: https://postgr.es/m/CA+hUKGKh7QrYzu=8yWEUJvXtMVm_CNWH1L_TLWCbZMwbi1XP2Q@mail.gmail.com
This change improves the description of the
restrict_nonsystem_relation_kind parameter in guc_table.c and the
documentation for better clarity.
Backpatch to 12, where this GUC parameter was introduced.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/6a96f1af-22b4-4a80-8161-1f26606b9ee2%40eisentraut.org
Backpatch-through: 12
The conflict types 'update_differ' and 'delete_differ' indicate that a row
to be modified was previously altered by another origin. Rename those to
'update_origin_differs' and 'delete_origin_differs' to clarify their
meaning.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Peter Smith
Discussion: https://postgr.es/m/CAA4eK1+HEKwG_UYt4Zvwh5o_HoCKCjEGesRjJX38xAH3OxuuYA@mail.gmail.com
Currently, only unnamed prepared statement are supported by psql with
the meta-command \bind. With only this command, it is not possible to
test named statement creation, execution or close through the extended
protocol.
This commit introduces three additional commands:
* \parse creates a prepared statement using the extended protocol,
acting as a wrapper of libpq's PQsendPrepare().
* \bind_named binds and executes an existing prepared statement using
the extended protocol, for PQsendQueryPrepared().
* \close closes an existing prepared statement using the extended
protocol, for PQsendClosePrepared().
This is going to be useful to add regression tests for the extended
query protocol, and I have some plans for that on separate threads.
Note that \bind relies on PQsendQueryParams().
The code of psql is refactored so as bind_flag is replaced by an enum in
_psqlSettings that tracks the type of libpq routine to execute, based on
the meta-command involved, with the default being PQsendQuery(). This
refactoring piece has been written by me, while Anthonin has implemented
the rest.
Author: Anthonin Bonnefoy, Michael Paquier
Reviewed-by: Aleksander Alekseev, Jelte Fennema-Nio
Discussion: https://postgr.es/m/CAO6_XqpSq0Q0kQcVLCbtagY94V2GxNP3zCnR6WnOM8WqXPK4nw@mail.gmail.com
This patch provides the additional logging information in the following
conflict scenarios while applying changes:
insert_exists: Inserting a row that violates a NOT DEFERRABLE unique constraint.
update_differ: Updating a row that was previously modified by another origin.
update_exists: The updated row value violates a NOT DEFERRABLE unique constraint.
update_missing: The tuple to be updated is missing.
delete_differ: Deleting a row that was previously modified by another origin.
delete_missing: The tuple to be deleted is missing.
For insert_exists and update_exists conflicts, the log can include the origin
and commit timestamp details of the conflicting key with track_commit_timestamp
enabled.
update_differ and delete_differ conflicts can only be detected when
track_commit_timestamp is enabled on the subscriber.
We do not offer additional logging for exclusion constraint violations because
these constraints can specify rules that are more complex than simple equality
checks. Resolving such conflicts won't be straightforward. This area can be
further enhanced if required.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Amit Kapila, Nisha Moond, Hayato Kuroda, Dilip Kumar
Discussion: https://postgr.es/m/OS0PR01MB5716352552DFADB8E9AD1D8994C92@OS0PR01MB5716.jpnprd01.prod.outlook.com
"EXTRACT(WEEK FROM interval_value)" formerly threw an error.
Define it as "tm->tm_mday / 7". (With C99 division semantics,
this gives consistent results for negative intervals.)
"EXTRACT(QUARTER FROM interval_value)" has been implemented
all along, but it formerly gave extremely strange results for
negative intervals. Fix it so that the output for -N months
is the negative of the output for N months.
Per bug #18348 from Michael Bondarenko and subsequent discussion.
Discussion: https://postgr.es/m/18348-b097a3587dfde8a4@postgresql.org
The TRACE_SORT macro guarded the availability of the trace_sort GUC
setting. But it has been enabled by default ever since it was
introduced in PostgreSQL 8.1, and there have been no reports that
someone wanted to disable it. So just remove the macro to simplify
things. (For the avoidance of doubt: The trace_sort GUC is still
there. This only removes the rarely-used macro guarding it.)
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/be5f7162-7c1d-44e3-9a78-74dcaa6529f2%40eisentraut.org
We've had code for CRC-32 and CRC-32C for some time (for WAL
records, etc.), but there was no way for users to call it, despite
apparent popular demand. The new crc32() and crc32c() functions
accept bytea input and return bigint (to avoid returning negative
values).
Bumps catversion.
Author: Aleksander Alekseev
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/CAJ7c6TNMTGnqnG%3DyXXUQh9E88JDckmR45H2Q%2B%3DucaCLMOW1QQw%40mail.gmail.com
32d3ed816 added the "path" column to pg_backend_memory_contexts to allow
a stable method of obtaining the parent MemoryContext of a given row in
the view. Using the "path" column is now the preferred method of
obtaining the parent row.
Previously, any queries which were self-joining to this view using the
"name" and "parent" columns could get incorrect results due to the fact
that names are not unique. Here we aim to explicitly break such queries
so that they can be corrected and use the "path" column instead.
It is possible that there are more innocent users of the parent column
that just need an indication of the parent and having to write out a
self-joining CTE may be an unnecessary hassle for those cases. Let's
remove the column for now and see if anyone comes back with any
complaints. This does seem like a good time to attempt to get rid of
the column as we still have around 1 year to revert this if someone comes
back with a valid complaint. Plus this view is new to v14 and is quite
niche, so perhaps not many people will be affected.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCT7NOe4fZXRL8XaoxHpSXYTu6GTpULT_3E-HT9hzjoFRA@mail.gmail.com
pg_wal_replay_wait() is intended to be called on standby. However, standby
can be promoted to primary at any moment, even concurrently with the
pg_wal_replay_wait() call. If recovery is not currently in progress
that doesn't mean the wait was unsuccessful. Thus, we always need to recheck
if the target LSN is replayed.
Reported-by: Kevin Hale Boyes
Discussion: https://postgr.es/m/CAPpHfdu5QN%2BZGACS%2B7foxmr8_nekgA2PA%2B-G3BuOUrdBLBFb6Q%40mail.gmail.com
Author: Alexander Korotkov
Presently, we inconsistently use dashes in references to these
algorithms (e.g., CRC32C versus CRC-32C). Some popular web sources
appear to prefer dashes, and with this commit, we will, too.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/ZrUFpLP-w2zTAHqq%40nathan
This section claims we use CRC-32 for WAL records and two-phase
state files, but we've actually used CRC-32C since v9.5 (commit
5028f22f6e). Fix that.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/ZrUFpLP-w2zTAHqq%40nathan
Backpatch-through: 12
This used to be part of CREATE OPERATOR CLASS and ALTER OPERATOR
FAMILY, but it has done nothing (except issue a NOTICE) since
PostgreSQL 8.4. Commit 30e7c175b8 removed support for dumping from
pre-9.2 servers, so this no longer serves any need.
This now removes it completely, and you'd get a normal parse error if
you used it.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/113ef2d2-3657-4353-be97-f28fceddbca1%40eisentraut.org
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
This acts as a template of what can be achieved with the pluggable
cumulative stats APIs introduced in 7949d95945 for the
variable-numbered case where stats entries are stored in the pgstats
dshash, while being potentially useful on its own for injection points,
say to add starting and/or stopping conditions based on the statistics
(want to trigger a callback after N calls, for example?).
Currently, the only data gathered is the number of times an injection
point is run. More fields can always be added as required. All the
routines related to the stats are located in their own file, called
injection_stats.c in the test module injection_points, for clarity.
The stats can be used only if the test module is loaded through
shared_preload_libraries. The key of the dshash uses InvalidOid for the
database, and an int4 hash of the injection point name as object ID.
A TAP test is added to provide coverage for the new custom cumulative
stats APIs, showing the persistency of the data across restarts, for
example.
Author: Michael Paquier
Reviewed-by: Dmitry Dolgov, Bertrand Drouvot
Discussion: https://postgr.es/m/Zmqm9j5EO0I4W8dx@paquier.xyz
This commit adds support in the backend for $subject, allowing
out-of-core extensions to plug their own custom kinds of cumulative
statistics. This feature has come up a few times into the lists, and
the first, original, suggestion came from Andres Freund, about
pg_stat_statements to use the cumulative statistics APIs in shared
memory rather than its own less efficient internals. The advantage of
this implementation is that this can be extended to any kind of
statistics.
The stats kinds are divided into two parts:
- The in-core "builtin" stats kinds, with designated initializers, able
to use IDs up to 128.
- The "custom" stats kinds, able to use a range of IDs from 128 to 256
(128 slots available as of this patch), with information saved in
TopMemoryContext. This can be made larger, if necessary.
There are two types of cumulative statistics in the backend:
- For fixed-numbered objects (like WAL, archiver, etc.). These are
attached to the snapshot and pgstats shmem control structures for
efficiency, and built-in stats kinds still do that to avoid any
redirection penalty. The data of custom kinds is stored in a first
array in snapshot structure and a second array in the shmem control
structure, both indexed by their ID, acting as an equivalent of the
builtin stats.
- For variable-numbered objects (like tables, functions, etc.). These
are stored in a dshash using the stats kind ID in the hash lookup key.
Internally, the handling of the builtin stats is unchanged, and both
fixed and variabled-numbered objects are supported. Structure
definitions for builtin stats kinds are renamed to reflect better the
differences with custom kinds.
Like custom RMGRs, custom cumulative statistics can only be loaded with
shared_preload_libraries at startup, and must allocate a unique ID
shared across all the PostgreSQL extension ecosystem with the following
wiki page to avoid conflicts:
https://wiki.postgresql.org/wiki/CustomCumulativeStats
This makes the detection of the stats kinds and their handling when
reading and writing stats much easier than, say, allocating IDs for
stats kinds from a shared memory counter, that may change the ID used by
a stats kind across restarts. When under development, extensions can
use PGSTAT_KIND_EXPERIMENTAL.
Two examples that can be used as templates for fixed-numbered and
variable-numbered stats kinds will be added in some follow-up commits,
with tests to provide coverage.
Some documentation is added to explain how to use this plugin facility.
Author: Michael Paquier
Reviewed-by: Dmitry Dolgov, Bertrand Drouvot
Discussion: https://postgr.es/m/Zmqm9j5EO0I4W8dx@paquier.xyz
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
The queue of waiters is stored in the shared memory as an LSN-ordered pairing
heap, where the waiter with the nearest LSN stays on the top. During
the replay of WAL, waiters whose LSNs have already been replayed are deleted
from the shared memory pairing heap and woken up by setting their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records, implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working without an active snapshot,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
Reviewed-by: Heikki Linnakangas, Kyotaro Horiguchi
This converts
COPY_PARSE_PLAN_TREES
WRITE_READ_PARSE_PLAN_TREES
RAW_EXPRESSION_COVERAGE_TEST
into run-time parameters
debug_copy_parse_plan_trees
debug_write_read_parse_plan_trees
debug_raw_expression_coverage_test
They can be activated for tests using PG_TEST_INITDB_EXTRA_OPTS.
The compile-time symbols are kept for build farm compatibility, but
they now just determine the default value of the run-time settings.
Furthermore, support for these settings is not compiled in at all
unless assertions are enabled, or the new symbol
DEBUG_NODE_TESTS_ENABLED is defined at compile time, or any of the
legacy compile-time setting symbols are defined. So there is no
run-time overhead in production builds. (This is similar to the
handling of DISCARD_CACHES_ENABLED.)
Discussion: https://www.postgresql.org/message-id/flat/30747bd8-f51e-4e0c-a310-a6e2c37ec8aa%40eisentraut.org
Prior to this commit, the docs for enable_partitionwise_aggregate and
enable_partitionwise_join mentioned the additional overheads enabling
these causes for the query planner, but they mentioned nothing about the
possible surge in work_mem-consuming executor nodes that could end up in
the final plan. Dimitrios reported the OOM killer intervened on his
query as a result of using enable_partitionwise_aggregate=on.
Here we adjust the docs to mention the possible increase in the number of
work_mem-consuming executor nodes that can appear in the final plan as a
result of enabling these GUCs.
Reported-by: Dimitrios Apostolou
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/3603c380-d094-136e-e333-610914fb3e80%40gmx.net
Discussion: https://postgr.es/m/CAApHDvoZ0_yqwPFEpb6h261L76BUpmh5GxBQq0LeRzQ5Jh3zzg@mail.gmail.com
Backpatch-through: 12, oldest supported version
Some users inadvertently rely on pg_dump as their primary backup tool,
when better solutions exist. The pg_dump man page is arguably
misleading in that it starts with
"pg_dump is a utility for backing up a PostgreSQL database."
This tones this down a little bit, by replacing most uses of "backup"
with "export" and adding a short note that pg_dump is not a
general-purpose backup tool.
Discussion: https://www.postgresql.org/message-id/flat/70b48475-7706-4268-990d-fd522b038d96%40eisentraut.org
Modern versions of all relevant architectures and tool chains have
atomics support. Since edadeb07, there is no remaining reason to carry
code that simulates atomic flags and uint32 imperfectly with spinlocks.
64 bit atomics are still emulated with spinlocks, if needed, for now.
Any modern compiler capable of implementing C11 <stdatomic.h> must have
the underlying operations we need, though we don't require C11 yet. We
detect certain compilers and architectures, so hypothetical new systems
might need adjustments here.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (concept, not the patch)
Reviewed-by: Andres Freund <andres@anarazel.de> (concept, not the patch)
Discussion: https://postgr.es/m/3351991.1697728588%40sss.pgh.pa.us
A later change will require atomic support, so it wouldn't make sense
for a hypothetical new system not to be able to implement spinlocks.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (concept, not the patch)
Reviewed-by: Andres Freund <andres@anarazel.de> (concept, not the patch)
Discussion: https://postgr.es/m/3351991.1697728588%40sss.pgh.pa.us
The documentation for System V IPC parameters provides complicated
formulas to determine the appropriate values for SEMMNI and SEMMNS.
Furthermore, these formulas have often been wrong because folks
forget to update them (e.g., when adding a new auxiliary process).
This commit introduces a new runtime-computed GUC named
num_os_semaphores that reports the number of semaphores needed for
the configured number of allowed connections, worker processes,
etc. This new GUC allows us to simplify the formulas in the
documentation, and it should help prevent future inaccuracies.
Like the other runtime-computed GUCs, users can view it with
"postgres -C" before starting the server, which is useful for
preconfiguring the necessary operating system resources.
Reviewed-by: Tom Lane, Sami Imseih, Andres Freund, Robert Haas
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
We restrict typed tables (those declared as "OF composite_type")
to be based on stand-alone composite types, not composite types
that are the implicitly-created rowtypes of other tables.
But if you tried to do that, you got the very confusing error
message "type foo is not a composite type". Provide a more specific
message for that case. Also clarify related documentation in the
CREATE TABLE man page.
Erik Wienhold and David G. Johnston, per complaint from Hannu Krosing.
Discussion: https://postgr.es/m/CAMT0RQRysCb_Amy5CTENSc5GfsvXL1a4qX3mv_hx31_v74P==g@mail.gmail.com
This commit extends the postgres_fdw_get_connections() function
to check if connections are closed. This is useful for detecting closed
postgres_fdw connections that could prevent successful transaction
commits. Users can roll back transactions immediately upon detecting
closed connections, avoiding unnecessary processing of failed
transactions.
This feature is available only on systems supporting the non-standard
POLLRDHUP extension to the poll system call, including Linux.
Author: Hayato Kuroda
Reviewed-by: Shinya Kato, Zhihong Yu, Kyotaro Horiguchi, Andres Freund
Reviewed-by: Onder Kalaci, Takamichi Osumi, Vignesh C, Tom Lane, Ted Yu
Reviewed-by: Katsuragi Yuta, Peter Smith, Shubham Khanna, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB58662809E678253B90E82CE5F5889@TYAPR01MB5866.jpnprd01.prod.outlook.com
This commit extends the postgres_fdw_get_connections() function to
include a new used_in_xact column, indicating whether each connection
is used in the current transaction.
This addition is particularly useful for the upcoming feature that
will check if connections are closed. By using those information,
users can verify if postgres_fdw connections used in a transaction
remain open. If any connection is closed, the transaction cannot
be committed successfully. In this case users can roll back it
immediately without waiting for transaction end.
The SQL API for postgres_fdw_get_connections() is updated by
this commit and may change in the future. To handle compatibility
with older SQL declarations, an API versioning system is introduced,
allowing the function to behave differently based on the API version.
Author: Hayato Kuroda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/be9382f7-5072-4760-8b3f-31d6dffa8d62@oss.nttdata.com
The new test tests the libpq fallback behavior on an early error,
which was fixed in the previous commit.
This adds an IS_INJECTION_POINT_ATTACHED() macro, to allow writing
injected test code alongside the normal source code. In principle, the
new test could've been implemented by an extra test module with a
callback that sets the FrontendProtocol global variable, but I think
it's more clear to have the test code right where the injection point
is, because it has pretty intimate knowledge of the surrounding
context it runs in.
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAOYmi%2Bnwvu21mJ4DYKUa98HdfM_KZJi7B1MhyXtnsyOO-PB6Ww%40mail.gmail.com
The documentation previously described the output columns of
postgres_fdw_get_connections() in text format, which was manageable
for the original two columns. However, upcoming patches will add
new columns, making text descriptions less readable.
This commit updates the documentation to use a table format,
making it easier for users to understand each output column.
Author: Fujii Masao, Hayato Kuroda
Reviewed-by: Hayato Kuroda
Discussion: https://postgr.es/m/d04aae8d-05f5-42f4-a263-b962334d9f75@oss.nttdata.com
If you try to take an incremental backup on a standby and there hasn't
been much system activity, it might fail. Document why this happens.
Also add a hint to the error message you get, to make it more likely
that users will understand what has gone wrong.
Laurenz Albe and Robert Haas
Discussion: https://postgr.es/m/5468641ad821dad7aa3b2d65bf843146443a1b68.camel@cybertec.at
This change allows these functions to be called using named-argument
notation, which can be helpful for readability, particularly for
the ones with many arguments.
There was considerable debate about exactly which names to use,
but in the end we settled on the names already shown in our
documentation table 9.10.
The citext extension provides citext-aware versions of some of
these functions, so add argument names to those too.
In passing, fix table 9.10's syntax synopses for regexp_match,
which were slightly wrong about which combinations of arguments
are allowed.
Jian He, reviewed by Dian Fay and others
Discussion: https://postgr.es/m/CACJufxG3NFKKsh6x4fRLv8h3V-HvN4W5dA=zNKMxsNcDwOKang@mail.gmail.com
"path" provides a reliable method of determining the parent/child
relationships between memory contexts. Previously this could be done in
a non-reliable way by writing a recursive query and joining the "parent"
and "name" columns. This wasn't reliable as the names were not unique,
which could result in joining to the wrong parent.
To make this reliable, "path" stores an array of numerical identifiers
starting with the identifier for TopLevelMemoryContext. It contains an
element for each intermediate parent between that and the current context.
Incompatibility: Here we also adjust the "level" column to make it
1-based rather than 0-based. A 1-based level provides a convenient way
to access elements in the "path" array. e.g. path[level] gives the
identifier for the current context.
Identifiers are not stable across multiple evaluations of the view. In
an attempt to make these more stable for ad-hoc queries, the identifiers
are assigned breadth-first. Contexts closer to TopLevelMemoryContext
are less likely to change between queries and during queries.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCThLyOsj3e_gYEvLoHkr5w=tadDiN_=z2OwsK3VJppeBA@mail.gmail.com
Reviewed-by: Andres Freund, Stephen Frost, Atsushi Torikoshi,
Reviewed-by: Michael Paquier, Robert Haas, David Rowley
The two_phase option is controlled by both the publisher (as a slot
option) and the subscriber (as a subscription option), so the slot option
must also be modified.
Changing the 'two_phase' option for a subscription from 'true' to 'false'
is permitted only when there are no pending prepared transactions
corresponding to that subscription. Otherwise, the changes of already
prepared transactions can be replicated again along with their corresponding
commit leading to duplicate data or errors.
To avoid data loss, the 'two_phase' option for a subscription can only be
changed from 'false' to 'true' once the initial data synchronization is
completed. Therefore this is performed later by the logical replication worker.
Author: Hayato Kuroda, Ajin Cherian, Amit Kapila
Reviewed-by: Peter Smith, Hou Zhijie, Amit Kapila, Vitaly Davydov, Vignesh C
Discussion: https://postgr.es/m/8fab8-65d74c80-1-2f28e880@39088166
The docs currently imply that ldapurl is for search+bind only, but
that's not true. Rearrange the docs to cover this better.
Add a test ldapurl with simple bind. This was previously allowed but
unexercised, and now that it's documented it'd be good to pin the
behavior.
Improve error when mixing LDAP bind modes. The option names had gone
stale; replace them with a more general statement.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAOYmi+nyg9gE0LeP=xQ3AgyQGR=5ZZMkVVbWd0uR8XQmg_dd5Q@mail.gmail.com
We were not being clear about which variants of the "direction"
clause are permitted in MOVE. Also, the text seemed to be
written with only the FETCH/MOVE NEXT case in mind, so it
didn't apply very well to other variants.
Also, document that "MOVE count IN cursor" only works if count
is a constant. This is not the whole truth, because some other
cases such as a parenthesized expression will also work, but
we want to push people to use "MOVE FORWARD count" instead.
The constant case is enough to cover what we allow in plain SQL,
and that seems sufficient to claim support for.
Update a comment in pl_gram.y claiming that we don't document
that point.
Per gripe from Philipp Salvisberg.
Discussion: https://postgr.es/m/172155553388.702.7932496598218792085@wrigleys.postgresql.org
RAISE accepts either = or := in the USING clause, so fix the
syntax synopsis to show that.
Rearrange and wordsmith the descriptions of the different syntax
variants, in hopes of improving clarity.
Igor Gnatyuk, reviewed by Jian He and Laurenz Albe; minor additional
wordsmithing by me
Discussion: https://postgr.es/m/CAEu6iLvhF5sdGeat2x4_L0FvWW_SiN--ma8ya7CZd-oJoV+yqQ@mail.gmail.com
To do this, we must include the wal_level in the first WAL record
covered by each summary file; so add wal_level to struct Checkpoint
and the payload of XLOG_CHECKPOINT_REDO and XLOG_END_OF_RECOVERY.
This, in turn, requires bumping XLOG_PAGE_MAGIC and, since the
Checkpoint is also stored in the control file, also
PG_CONTROL_VERSION. It's not great to do that so late in the release
cycle, but the alternative seems to ship v17 without robust
protections against this scenario, which could result in corrupted
incremental backups.
A side effect of this patch is that, when a server with
wal_level=replica is started with summarize_wal=on for the first time,
summarization will no longer begin with the oldest WAL that still
exists in pg_wal, but rather from the first checkpoint after that.
This change should be harmless, because a WAL summary for a partial
checkpoint cycle can never make an incremental backup possible when
it would otherwise not have been.
Report by Fujii Masao. Patch by me. Review and/or testing by Jakub
Wartak and Fujii Masao.
Discussion: http://postgr.es/m/6e30082e-041b-4e31-9633-95a66de76f5d@oss.nttdata.com
This new macro is able to perform a direct lookup from the local cache
of injection points (refreshed each time a point is loaded or run),
without touching the shared memory state of injection points at all.
This works in combination with INJECTION_POINT_LOAD(), and it is better
than INJECTION_POINT() in a critical section due to the fact that it
would avoid all memory allocations should a concurrent detach happen
since a LOAD(), as it retrieves a callback from the backend-private
memory.
The documentation is updated to describe in more details how to use this
new macro with a load. Some tests are added to the module
injection_points based on a new SQL function that acts as a wrapper of
INJECTION_POINT_CACHED().
Based on a suggestion from Heikki Linnakangas.
Author: Heikki Linnakangas, Michael Paquier
Discussion: https://postgr.es/m/58d588d0-e63f-432f-9181-bed29313dece@iki.fi
Using <replaceable>text</replaceable> inside parantheses is not a
common or good style, so rephrase a sentence to avoid that style.
Also rephrase the text in that paragraph a bit while at it.
Reported-by: Marcos Pegoraro <marcos@f10.com.br>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAB-JLwZqH3Yec6Kz-4-+pa0ZG9QJBsxjJZwYcMZYzEDR_fXnKw@mail.gmail.com
Point out that savepoint commands cannot be issued in PL/pgSQL,
and suggest that exception blocks can usually be used instead.
Add a caveat to the discussion of cursor loops vs. transactions,
pointing out that any locks taken by the cursor query will be lost
at COMMIT. This is implicit in what's already said, but the existing
text leaves the distinct impression that the auto-hold behavior is
transparent, which it's not really.
Per a couple of recent complaints (one unsigned, and one in bug #18531
from Dzmitry Jachnik). Back-patch to v17, just so this makes it into
current docs in less than a year-and-a-half.
Discussion: https://postgr.es/m/172076354433.736586.14347210271966220018@wrigleys.postgresql.org
Discussion: https://postgr.es/m/18531-c6dddd33b8555fd2@postgresql.org
As commit ca4103025d stated, new partitions without a specified tablespace
should inherit the parent relation's tablespace. However, previously,
ALTER TABLE MERGE PARTITIONS and ALTER TABLE SPLIT PARTITION commands
always created new partitions in the default tablespace, ignoring
the parent's tablespace. This commit ensures new partitions inherit
the parent's tablespace.
Backpatch to v17 where these commands were introduced.
Author: Fujii Masao
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/abaf390b-3320-40a5-8815-ef476db5cfe7@oss.nttdata.com
Presently, the page for predefined roles contains a table with
brief descriptions of what each role allows. Below the table,
there is a separate section with more detailed information about
some of the roles. As the set of predefined roles has grown over
the years, this page has (IMHO) become less readable.
This commit attempts to improve the predefined roles documentation
by abandoning the table in favor of listing each role with its own
complete description, similar to how we document GUCs. Besides
merging the information that was split between the table and the
section below it, this commit also alphabetizes the roles. The
alphabetization is imperfect because some of the roles are grouped
(e.g., pg_read_all_data and pg_write_all_data), and we order such
groups by the first role mentioned, but that seemed like a better
choice than breaking the groups apart. Finally, this commit makes
some stylistic adjustments to the text.
Reviewed-by: David G. Johnston, Robert Haas
Discussion: https://postgr.es/m/ZmtM-4-eRtq8DRf6%40nathan
The I/O timing information collected when track_io_timing is
enabled is now documented to appear in the pg_stat_io view,
which was previously not mentioned.
This commit also enhances the description of track_io_timing
to clarify that it monitors not only block read and write
but also block extend and fsync operations. Additionally,
the description of track_wal_io_timing has been improved
to mention both WAL write and WAL fsync monitoring.
Backpatch to v16 where pg_stat_io was added.
Author: Hajime Matsunaga
Reviewed-by: Melanie Plageman, Nazir Bilal Yavuz, Fujii Masao
Discussion: https://postgr.es/m/TYWPR01MB10742EE4A6F34C33061429D38A4D52@TYWPR01MB10742.jpnprd01.prod.outlook.com
This patch modifies the pg_get_acl() function to accept a third argument
called "objsubid", bringing it on par with similar functions in this
area like pg_describe_object(). This enables the retrieval of ACLs for
relation attributes when scanning dependencies.
Bump catalog version.
Author: Joel Jacobson
Discussion: https://postgr.es/m/f2539bff-64be-47f0-9f0b-df85d3cc0432@app.fastmail.com
Since commit 3a9b18b309, roles with privileges of pg_signal_backend
cannot signal autovacuum workers. Many users treated the ability
to signal autovacuum workers as a feature instead of a bug, so we
are reintroducing it via a new predefined role. Having privileges
of this new role, named pg_signal_autovacuum_worker, only permits
signaling autovacuum workers. It does not permit signaling other
types of superuser backends.
Bumps catversion.
Author: Kirill Reshke
Reviewed-by: Anthony Leung, Michael Paquier, Andrey Borodin
Discussion: https://postgr.es/m/CALdSSPhC4GGmbnugHfB9G0%3DfAxjCSug_-rmL9oUh0LTxsyBfsg%40mail.gmail.com
1. Remove the keyword SELECT from the examples to be consistent
with the examples of other JSON-related functions listed on the
same page.
2. Add <synopsis> tags around the functions' syntax definition
3. Capitalize function names in the syntax synopsis and the examples
4. Use <itemizedlist> lists for dividing the descriptions of
individual functions into bullet points
5. Significantly rewrite the description of wrapper clauses of
JSON_QUERY
6. Significantly rewrite the descriptions of ON ERROR / EMPTY
clauses of JSON_QUERY() and JSON_VALUE() functions
7. Add a note about how JSON_VALUE() and JSON_QUERY() differ when
returning a JSON null result
8. Move the description of the PASSING clause from the descriptions
of individual functions into the top paragraph
And other miscellaneous text improvements, typo fixes.
Suggested-by: Thom Brown <thom@linux.com>
Suggested-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/CAA-aLv7Dfy9BMrhUZ1skcg=OdqysWKzObS7XiDXdotJNF0E44Q@mail.gmail.com
Discussion: https://postgr.es/m/CAKFQuwZNxNHuPk44zDF7z8qZec1Aof10aA9tWvBU5CMhEKEd8A@mail.gmail.com
Previously, the internal name of a PL/Tcl function was just
"__PLTcl_proc_NNNN", where NNNN is the function OID. That's pretty
unhelpful when reading an error report. Plus it prevents us from
testing the CONTEXT output for PL/Tcl errors, since the OIDs shown
in the regression tests wouldn't be stable.
Instead, base the internal name on the result of format_procedure(),
which will be unique in most cases. For the edge cases where it's
not, we can append the function OID to make it unique.
Sadly, the pltcl_trigger.sql test script still has to suppress the
context reports, because they'd include trigger arguments which
contain relation OIDs per PL/Tcl's longstanding API for triggers.
I had to modify one existing test case to throw a different error
than before, because I found that Tcl 8.5 and Tcl 8.6 spell the
context message for the original error slightly differently.
We might have to make more adjustments in that vein once this
gets wider testing.
Patch by me; thanks to Pavel Stehule for the idea to use
format_procedure() rather than just the proname.
Discussion: https://postgr.es/m/890581.1717609350@sss.pgh.pa.us
Add a link to Joe Hellerstein's paper "Looking Back at Postgres",
which is quite an interesting take on the history of Postgres.
The reference to Appendix E was written when we were still keeping
the entire release-note history there, which we stopped doing some
years ago when the O(N^2) cost of that started to become apparent.
Instead, point to the release note archives on the website.
(This per suggestion from Daniel Gustafsson.)
In passing, move the "ports12" biblioentry to be in alphabetical
order within that section.
Discussion: https://postgr.es/m/3345678.1720071633@sss.pgh.pa.us
This can be used to load an injection point and prewarm the
backend-level cache before running it, to avoid issues if the point
cannot be loaded due to restrictions in the code path where it would be
run, like a critical section where no memory allocation can happen
(load_external_function() can do allocations when expanding a library
name).
Tests can use a macro called INJECTION_POINT_LOAD() to load an injection
point. The test module injection_points gains some tests, and a SQL
function able to load an injection point.
Based on a request from Andrey Borodin, who has implemented a test for
multixacts requiring this facility.
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/ZkrBE1e2q2wGvsoN@paquier.xyz
State explicitly that the coordinates in our geometric data types are
float8. Also explain that polygons store their bounding box.
While here, fix the table of geometric data types to show type
"line"'s size correctly: it's 24 bytes not 32. This has somehow
escaped notice since that table was made in 1998.
Per suggestion from Sebastian Skałacki. The size error seems
important enough to justify back-patching.
Discussion: https://postgr.es/m/172000045661.706.1822177575291548794@wrigleys.postgresql.org
The ssl_prefer_server_ciphers setting is quite important from a
security point of view, so simply stating that older versions
doesn't have it isn't very helpful. This adds the version when
the GUC was added to help readers.
Backpatch to all supported versions since this setting has been
around since 9.4.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/5D7E0F5E-E620-4D54-8788-66D421AC76F0@yesql.se
Backpatch-through: v12
This function returns the ACL for a database object, specified by
catalog OID and object OID. This is useful to be able to
retrieve the ACL associated to an object specified with a
(class_id,objid) couple, similarly to the other functions for object
identification, when joined with pg_depend or pg_shdepend.
Original idea by Álvaro Herrera.
Bump catalog version.
Author: Joel Jacobson
Reviewed-by: Isaac Morland, Michael Paquier, Ranier Vilela
Discussion: https://postgr.es/m/80b16434-b9b1-4c3d-8f28-569f21c2c102@app.fastmail.com
This old CPU architecture hasn't been produced in decades, and
whatever instances might still survive are surely too underpowered
for anyone to consider running Postgres on in production. We'd
nonetheless continued to carry code support for it (largely at my
insistence), because its unique implementation of spinlocks seemed
like a good edge case for our spinlock infrastructure. However,
our last buildfarm animal of this type was retired last year, and
it seems quite unlikely that another will emerge. Without the ability
to run tests, the argument that this is useful test code fails to
hold water. Furthermore, carrying code support for an untestable
architecture has costs not to be ignored. So, remove HPPA-specific
code, in the same vein as commits 718aa43a4 and 92d70b77e.
Discussion: https://postgr.es/m/3351991.1697728588@sss.pgh.pa.us
The standby_slot_names GUC allows the specification of physical standby
slots that must be synchronized before the logical walsenders associated
with logical failover slots. However, for this purpose, the GUC name is
too generic.
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Masahiko Sawada
Backpatch-through: 17
Discussion: https://postgr.es/m/ZnWeUgdHong93fQN@momjian.us
Introduces --copy as an alternative to --clone and --copy-file-range.
This option simply picks the default mode to copy files, as if none of
the options was specified. This makes pg_combinebackup options more
consistent with pg_upgrade, and it makes testing simpler.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/48da4a1f-ccd9-4988-9622-24f37b1de2b4%40eisentraut.org
pg_createsubscriber currently always sets up logical replication
with two-phase commit disabled. Improving that is not going to
happen for v17. In the meantime, document the deficiency, and
adjust pg_createsubscriber so that it will emit a warning if
the source installation has max_prepared_transactions > 0.
Hayato Kuroda (some mods by Amit Kapila and me), per complaint from
Noah Misch
Discussion: https://postgr.es/m/20240623062157.97.nmisch@google.com
Currently, the grammar allows any supported values in the ON ERROR
and ON EMPTY clauses for SQL/JSON functions, regardless of whether
the values are appropriate for the function. This commit ensures
that during parse analysis, the provided value is checked for
validity for the given function and throws a syntax error if it is
not.
While at it, this fixes some omissions in the documentation of the
ON ERROR/EMPTY clauses for JSON_TABLE().
Reported-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxFgWGqpESSYzyJ6tSurr3vFYBSNEmCfkGyB_dMdptFnZQ%40mail.gmail.com
The input document to functions JSON_EXISTS(), JSON_QUERY(),
JSON_VALUE(), and JSON_TABLE() can be specified as character or
UTF8-encoded bytea strings. These are automatically converted to
jsonb with an implicit cast before being passed to the jsonpath
machinery.
In the current implementation, errors that occur when parsing the
specified string into a valid JSON document are thrown
unconditionally. This means they are not subject to the explicit or
implicit ON ERROR clause of those functions, which is a standard-
conforming behavior. Add a note to the documentation to mention
that.
Reported-by: Markus Winand
Discussion: https://postgr.es/m/F7DD1442-265C-4220-A603-CB0DEB77E91D%40winand.at
0452b461bc adds alternative orderings of group-by keys during the query
optimization. This new feature is controlled by the new GUC parameter
enable_group_by_reordering, which accidentally came without the documentation.
This commit adds the missing documentation for that GUC.
Reported-by: Bruce Momjian
Discussion: https://postgr.es/m/ZnDx2FYlba_OafQd%40momjian.us
Author: Andrei Lepikhov
Reviewed-by: Pavel Borisov, Alexander Korotkov
Commit 534287403 invented SHARED_DEPENDENCY_INITACL entries in
pg_shdepend, but installed them only for non-owner roles mentioned
in a pg_init_privs entry. This turns out to be the wrong thing,
because there is nothing to cue REASSIGN OWNED to go and update
pg_init_privs entries when the object's ownership is reassigned.
That leads to leaving dangling entries in pg_init_privs, as
reported by Hannu Krosing. Instead, install INITACL entries for
all roles mentioned in pg_init_privs entries (except pinned roles),
and change ALTER OWNER to not touch them, just as it doesn't
touch pg_init_privs entries.
REASSIGN OWNED will now substitute the new owner OID for the old
in pg_init_privs entries. This feels like perhaps not quite the
right thing, since pg_init_privs ought to be a historical record
of the state of affairs just after CREATE EXTENSION. However,
it's hard to see what else to do, if we don't want to disallow
dropping the object's original owner. In any case this is
better than the previous do-nothing behavior, and we're unlikely
to come up with a superior solution in time for v17.
While here, tighten up some coding rules about how ACLs in
pg_init_privs should never be null or empty. There's not any
obvious reason to allow that, and perhaps asserting that it's
not so will catch some bugs. (We were previously inconsistent
on the point, with some code paths taking care not to store
empty ACLs and others not.)
This leaves recordExtensionInitPrivWorker not doing anything
with its ownerId argument, but we'll deal with that separately.
catversion bump forced because of change of expected contents
of pg_shdepend when pg_init_privs entries exist.
Discussion: https://postgr.es/m/CAMT0RQSVgv48G5GArUvOVhottWqZLrvC5wBzBa4HrUdXe9VRXw@mail.gmail.com
It used to check if the target server is connected to the primary
server (send required WAL) to rapidly react when the process won't
succeed. This code is not enough to guarantee that the recovery
process will complete. There is a window between the walreceiver
shutdown and the pg_is_in_recovery() returns false that can reach
NUM_CONN_ATTEMPTS attempts and fails.
Instead, rely only on the --recovery-timeout option to give up the
process after the specified number of seconds.
This should help with buildfarm failures on slow machines.
Author: Euler Taveira <euler.taveira@enterprisedb.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://www.postgresql.org/message-id/776c5cac-5ef5-4001-b1bc-5b698bc0c62a%40app.fastmail.com
Commit 667e65aac3 changed both num_dead_tuples and max_dead_tuples
columns to dead_tuple_bytes and max_dead_tuple_bytes columns,
respectively. But as per discussion, the number of dead tuples
collected still provides meaningful insights for users.
This commit reintroduces the column for the count of dead tuples,
renamed as num_dead_item_ids. It avoids confusion with the number of
dead tuples removed by VACUUM, which includes dead heap-only tuples
but excludes any pre-existing LP_DEAD items left behind by
opportunistic pruning.
Bump catalog version.
Reviewed-by: Peter Geoghegan, Álvaro Herrera, Andrey Borodin
Discussion: https://postgr.es/m/CAD21AoBL5sJE9TRWPyv%2Bw7k5Ee5QAJqDJEDJBUdAaCzGWAdvZw%40mail.gmail.com
Commit f5e4dedfa exposed libpq's internal function PQsocketPoll
without a lot of thought about whether that was an API we really
wanted to chisel in stone. The main problem with it is the use of
time_t to specify the timeout. While we do want an absolute time
so that a loop around PQsocketPoll doesn't have problems with
timeout slippage, time_t has only 1-second resolution. That's
already problematic for libpq's own internal usage --- for example,
pqConnectDBComplete has long had a kluge to treat "connect_timeout=1"
as 2 seconds so that it doesn't accidentally round to nearly zero.
And it's even less likely to be satisfactory for external callers.
Hence, let's change this while we still can.
The best idea seems to be to use an int64 count of microseconds since
the epoch --- basically the same thing as the backend's TimestampTz,
but let's use the standard Unix epoch (1970-01-01) since that's more
likely for clients to be easy to calculate. Millisecond resolution
would be plenty for foreseeable uses, but maybe the day will come that
we're glad we used microseconds.
Also, since time(2) isn't especially helpful for computing timeouts
defined this way, introduce a new function PQgetCurrentTimeUSec
to get the current time in this form.
Remove the hack in pqConnectDBComplete, so that "connect_timeout=1"
now means what you'd expect.
We can also remove the "#include <time.h>" that f5e4dedfa added to
libpq-fe.h, since there's no longer a need for time_t in that header.
It seems better for v17 not to enlarge libpq-fe.h's include footprint
from what it's historically been, anyway.
I also failed to resist the temptation to do some wordsmithing
on PQsocketPoll's documentation.
Patch by me, per complaint from Dominique Devienne.
Discussion: https://postgr.es/m/913559.1718055575@sss.pgh.pa.us
It wasn't in the documentation at all (even though we document all the
other debugging-like options). Also, change the --help output to show
that it exits after showing, similar to other options.
If the CALL is within an atomic context (e.g. there's an outer
transaction block), _SPI_execute_plan should acquire a fresh snapshot
to execute any such functions with. We failed to do that and instead
passed them the Portal snapshot, which had been acquired at the start
of the current SQL command. This'd lead to seeing stale values of
rows modified since the start of the command.
This is arguably a bug in 84f5c2908: I failed to see that "are we in
non-atomic mode" needs to be defined the same way as it is further
down in _SPI_execute_plan, i.e. check !_SPI_current->atomic not just
options->allow_nonatomic. Alternatively the blame could be laid on
plpgsql, which is unconditionally passing allow_nonatomic = true
for CALL/DO even when it knows it's in an atomic context. However,
fixing it in spi.c seems like a better idea since that will also fix
the problem for any extensions that may have copied plpgsql's coding
pattern.
While here, update an obsolete comment about _SPI_execute_plan's
snapshot management.
Per report from Victor Yegorov. Back-patch to all supported versions.
Discussion: https://postgr.es/m/CAGnEboiRe+fG2QxuBO2390F7P8e2MQ6UyBjZSL_w1Cej+E4=Vw@mail.gmail.com
The documentation for POSIX semaphores is missing a reference to
max_wal_senders. This commit fixes that in the same way that
commit 4ebe51a5fb fixed the same issue in the documentation for
System V semaphores.
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
This HBA entry was using "local" while specifying an address, which was
incorrect. While in it, this adjusts the format of the entry to be
aligned with the surroundings.
Oversight in 8fea86830e.
Reported-by: Stéphane Schildknecht
Reviewed-by: David G. Johnston
Discussion: https://postgr.es/m/44662001-54c4-4bfd-be93-35e01ca25fa1@gmail.com
Backpatch-through: 16
The formulas for SEMMNI and SEMMNS do not include the archiver
process, which was converted to an auxiliary process in v14, and
the WAL summarizer process, which was introduced in v17. This
commit corrects these formulas and adds a missing reference to
max_wal_senders nearby. Since this section of the documentation
tends to be incorrect quite often, we should likely give up on
documenting the exact formulas in favor of something less fragile,
but that is left as a future exercise.
Reported-by: Sami Imseih
Reviewed-by: Sami Imseih
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
Parameter column_name must be an existing column because ALTER
MATERIALIZED VIEW cannot add new columns. The old description was
likely copied from ALTER TABLE.
Author: Erik Wienhold
Discussion: https://postgr.es/m/6880ca53-7961-4eeb-86d5-6bd05fc2027e@ewie.name
Backpatch-through: 12
When MERGE/SPLIT created new partitions, it was cloning the extended
statistics of the parent table.
However, extended stats on partitioned tables don't behave like
indexes on partitioned tables (which exist only to create physical
indexes on child tables). Rather, extended stats on a parent 1) cause
extended stats to be collected and computed across the whole partition
hierarchy, and 2) do not cause extended stats to be computed for the
individual partitions.
"CREATE TABLE ... PARTITION OF" command doesn't copy extended
statistics. This commit makes createPartitionTable() behave
consistently.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/ZiJW1g2nbQs9ekwK%40pryzbyj2023
Author: Alexander Korotkov, Justin Pryzby
This reverts commit e1e83a7171.
Per further discussion on pgsql-release, we wish to ship beta1 with
that feature, and patch the bug, rather than shipping beta1 with
that feature reverted.
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
Specifically, it terminates a background worker even if the caller
couldn't terminate the background worker with pg_terminate_backend().
Commit 3a9b18b309 neglected to update
this. Back-patch to v13, which introduced DROP DATABASE FORCE.
Reviewed by Amit Kapila. Reported by Kirill Reshke.
Discussion: https://postgr.es/m/20240429212756.60.nmisch@google.com
There were three problems with the sslnegotiation options:
1. The sslmode=prefer and sslnegotiation=requiredirect combination was
somewhat dangerous, as you might unintentionally fall back to
plaintext authentication when connecting to a pre-v17 server.
2. There was an asymmetry between 'postgres' and 'direct'
options. 'postgres' meant "try only traditional negotiation", while
'direct' meant "try direct first, and fall back to traditional
negotiation if it fails". That was apparent only if you knew that the
'requiredirect' mode also exists.
3. The "require" word in 'requiredirect' suggests that it's somehow
more strict or more secure, similar to sslmode. However, I don't
consider direct SSL connections to be a security feature.
To address these problems:
- Only allow sslnegotiation='direct' if sslmode='require' or
stronger. And for the record, Jacob and Robert felt that we should do
that (or have sslnegotiation='direct' imply sslmode='require') anyway,
regardless of the first issue.
- Remove the 'direct' mode that falls back to traditional negotiation,
and rename what was called 'requiredirect' to 'direct' instead. In
other words, there is no "try both methods" option anymore, 'postgres'
now means the traditional negotiation and 'direct' means a direct SSL
connection.
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Jacob Champion
Discussion: https://www.postgresql.org/message-id/d3b1608a-a1b6-4eda-9ec5-ddb3e4375808%40iki.fi
The CREATE SUBSCRIPTION documentation mentions "false" is the default
option, so let's use true|false rather than on|off in the text which
talks about this option in the ALTER SUBSCRIPTION page.
The other boolean options mentioned in create_subscription.sgml use true
and false so it makes sense to be consistent with these. The "failover"
option is new to v17.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Ps-RqrggaJU5w85BbeQzw9CLmmLgADVJoJ=xx_4D5CWvw@mail.gmail.com
This feature set did not handle empty ranges correctly, and it's now
too late for PostgreSQL 17 to fix it.
The following commits are reverted:
6db4598fcb Add stratnum GiST support function
46a0cd4cef Add temporal PRIMARY KEY and UNIQUE constraints
86232a49a4 Fix comment on gist_stratnum_btree
030e10ff1a Rename pg_constraint.conwithoutoverlaps to conperiod
a88c800deb Use daterange and YMD in without_overlaps tests instead of tsrange.
5577a71fb0 Use half-open interval notation in without_overlaps tests
34768ee361 Add temporal FOREIGN KEY contraints
482e108cd3 Add test for REPLICA IDENTITY with a temporal key
c3db1f30cb doc: clarify PERIOD and WITHOUT OVERLAPS in CREATE TABLE
144c2ce0cc Fix ON CONFLICT DO NOTHING/UPDATE for temporal indexes
Discussion: https://www.postgresql.org/message-id/d0b64a7a-dfe4-4b84-a906-c7dedfa40a3e@eisentraut.org
postgres --name=value and -c name=value are equivalents. This commit
expands the documentation of libpq's "option" connection parameter and
the server startup sequence for shell interactions to mention both
rather than only -c.
Extracted from a larger patch by the same authors.
Reported-by: Alexey Palazhchenko
Author: David Johnston, Aleksander Alekseev
Reviewed-by: Nathan Bossart, Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m/CAJ7c6TMkuLiLfrA+EFCPYfhXoMKRxxssB5c86+ibxfaz6+=Sdg@mail.gmail.com
One is about subqueries becoming joins and the other is about optimizing
LIMIT by improving startup cost.
Reported-by: Andy Fan
Discussion: https://postgr.es/m/87h6f4ncc6.fsf@163.com
Reviewed-by: David Rowley
Backpatch-through: master
Presently, when this function is called for an unlogged sequence on
a standby server, it will error out with a message like
ERROR: could not open file "base/5/16388": No such file or directory
Since the pg_sequences system view uses pg_sequence_last_value(),
it can error similarly. To fix, modify the function to return NULL
for unlogged sequences on standby servers. Since this bug is
present on all versions since v15, this approach is preferable to
making the ERROR nicer because we need to repair the pg_sequences
view without modifying its definition on released versions. For
consistency, this commit also modifies the function to return NULL
for other sessions' temporary sequences. The pg_sequences view
already appropriately filters out such sequences, so there's no bug
there, but we might as well offer some defense in case someone
invokes this function directly.
Unlogged sequences were first introduced in v15, but temporary
sequences are much older, so while the fix for unlogged sequences
is only back-patched to v15, the temporary sequence portion is
back-patched to all supported versions.
We could also remove the privilege check in the pg_sequences view
definition in v18 if we modify this function to return NULL for
sequences for which the current user lacks privileges, but that is
left as a future exercise for when v18 development begins.
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20240501005730.GA594666%40nathanxps13
Backpatch-through: 12
There are some problems with the new way to handle these constraints
that were detected at the last minute, and require fixes that appear too
invasive to be doing this late in the cycle. Revert this (again) for
now, we'll try again with these problems fixed.
The following commits are reverted:
b0e96f3119 Catalog not-null constraints
9b581c5341 Disallow changing NO INHERIT status of a not-null constraint
d0ec2ddbe0 Fix not-null constraint test
ac22a9545c Move privilege check to the right place
b0f7dd915b Check stack depth in new recursive functions
3af7217942 Update information_schema definition for not-null constraints
c3709100be Fix propagating attnotnull in multiple inheritance
d9f686a72e Fix restore of not-null constraints with inheritance
d72d32f52d Don't try to assign smart names to constraints
0cd711271d Better handle indirect constraint drops
13daa33fa5 Disallow NO INHERIT not-null constraints on partitioned tables
d45597f72f Disallow direct change of NO INHERIT of not-null constraints
21ac38f498 Fix inconsistencies in error messages
Discussion: https://postgr.es/m/202405110940.joxlqcx4dogd@alvherre.pgsql
This commit extends the backend-side infrastructure of injection points
so as it becomes possible to register some input data when attaching a
point. This private data can be registered with the function name and
the library name of the callback when attaching a point, then it is
given as input argument to the callback. This gives the possibility for
modules to pass down custom data at runtime when attaching a point
without managing that internally, in a manner consistent with the
callback entry retrieved from the hash shmem table storing the injection
point data.
InjectionPointAttach() gains two arguments, to be able to define the
private data contents and its size.
A follow-up commit will rely on this infrastructure to close a race
condition with the injection point detach in the module
injection_points.
While on it, this changes InjectionPointDetach() to return a boolean,
returning false if a point cannot be detached. This has been mentioned
by Noah as useful when it comes to implement more complex tests with
concurrent point detach, solid with the automatic detach done for local
points in the test module.
Documentation is adjusted in consequence.
Per discussion with Noah Misch.
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20240509031553.47@rfd.leadboat.com
A lot of the examples in this section are quite ancient and no
longer match the system's current behavior. I ran through them
and updated the sample output to match what I get today.
Notably, it seems that the tenk1 table got a few pages smaller back
around v12, so that a lot of the cost estimates for queries on that
table are a little different now. (This also caused some examples
to surprisingly not match others, depending on when they were made.)
One mergejoin-based example no longer produces the same plan at all,
so I had to work around that, including switching to a different
example of using an enable_xxx setting.
I also changed a couple of examples that were relying on nonexistent
tables or indexes. IMO the premise of this section is that the
examples should be more-or-less reproducible against the regression
database, so that these examples were unhelpful as given. It's not
that hard to find a corresponding example with the tables we do have.
Some of the EXPLAIN ANALYZE examples were out of date in that we show
more numbers than we did at the time.
Possibly chapter 68 could use similar review, but I'm out of
energy for today.
User-written triggers can modify or block the effects of SQL update
and delete operations. That includes operations that are executed
to implement foreign keys' referential integrity actions (such as
ON UPDATE SET NULL or ON DELETE CASCADE). Therefore it's possible
for a misdesigned trigger to result in a database state that violates
the foreign key constraint.
While this isn't great, the alternatives seem worse: in particular,
refusing to fire triggers for such updates would break many valuable
use-cases. We could also try to recheck the constraint after the
action, but that'd roughly double the already-high cost of FK
constraint enforcement, for no benefit in normal cases. So we've
always considered that it's on the trigger programmer's head to
avoid breaking RI actions. This was never documented anywhere,
though. Add a para to the Triggers chapter to explain it.
Laurenz Albe, David Johnston, Tom Lane
Discussion: https://postgr.es/m/b81fe38fcc25a81be6e2e5b3fc1ff624130762fa.camel@cybertec.at
Both the pgbench --help output and the reference page have sections
for initialization options, benchmarking options, and common options.
But the --debug option ended up in the wrong place on the reference
page. Fix that by making the documentation match the --help output.
The catalog view pg_stats_ext fails to consider privileges for
expression statistics. The catalog view pg_stats_ext_exprs fails
to consider privileges and row-level security policies. To fix,
restrict the data in these views to table owners or roles that
inherit privileges of the table owner. It may be possible to apply
less restrictive privilege checks in some cases, but that is left
as a future exercise. Furthermore, for pg_stats_ext_exprs, do not
return data for tables with row-level security enabled, as is
already done for pg_stats_ext.
On the back-branches, a fix-CVE-2024-4317.sql script is provided
that will install into the "share" directory. This file can be
used to apply the fix to existing clusters.
Bumps catversion on 'master' branch only.
Reported-by: Lukas Fittl
Reviewed-by: Noah Misch, Tomas Vondra, Tom Lane
Security: CVE-2024-4317
Backpatch-through: 14
Both the initdb --help output and the reference page have a section
for options and a section for less commonly used options. But some
recently added options were sprinkled around inconsistently. Fix that
by making the documentation match the --help output.
We support changing NO INHERIT constraint to INHERIT for constraints in
child relations when adding a constraint to some ancestor relation, and
also during pg_upgrade's schema restore; but other than those special
cases, command ALTER TABLE ADD CONSTRAINT should not be allowed to
change an existing constraint from NO INHERIT to INHERIT, as that would
require to process child relations so that they also acquire an
appropriate constraint, which we may not be in a position to do. (It'd
also be surprising behavior.)
It is conceivable that we want to allow ALTER TABLE SET NOT NULL to make
such a change; but in that case some more code is needed to implement it
correctly, so for now I've made that throw the same error message.
Also, during the prep phase of ALTER TABLE ADD CONSTRAINT, acquire locks
on all descendant tables; otherwise we might operate on child tables on
which no locks are held, particularly in the mode where a primary key
causes not-null constraints to be created on children.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/7d923a66-55f0-3395-cd40-81c142b5448b@gmail.com
Commit 61461a300c accidentally misspelled the PGcancelConn struct
using the PQ prefix (which admittedly is a very easy typo to make).
Reported off-list.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
The documentation said that you need to pick a suitable LC_COLLATE
setting in addition to setting the DETERMINISTIC flag. This would
have been correct if the libc provider supported nondeterministic
collations, but since it doesn't, you actually need to set the LOCALE
option.
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a71023c2-0ae0-45ad-9688-cf3b93d0d65b%40eisentraut.org
This commit makes new partitions created by ALTER TABLE ... SPLIT PARTITION
and ALTER TABLE ... MERGE PARTITIONS commands inherit the paret table access
method.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/84ada05b-be5c-473e-6d1c-ebe5dd21b190%40gmail.com
Reviewed-by: Pavel Borisov
The createPartitionTable() function is responsible for creating new partitions
for ALTER TABLE ... MERGE PARTITIONS, and ALTER TABLE ... SPLIT PARTITION
commands. It emulates the behaviour of CREATE TABLE ... (LIKE ...), where
new table persistence should be specified by the user. In the table
partitioning persistent of the partition and its parent must match. So, this
commit makes createPartitionTable() copy the persistence of the parent
partition.
Also, this commit makes createPartitionTable() recheck the persistence after
the new table creation. This is needed because persistence might be affected
by pg_temp in search_path.
This commit also changes the signature of createPartitionTable() making it
take the parent's Relation itself instead of the name of the parent relation,
and return the Relation of new partition. That doesn't lead to
complications, because both callers have the parent table open and need to
open the new partition.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/dbc8b96c-3cf0-d1ee-860d-0e491da20485%40gmail.com
Author: Dmitry Koval
Reviewed-by: Alexander Korotkov, Robert Haas, Justin Pryzby, Pavel Borisov
If an ACL recorded in pg_init_privs mentions a non-pinned role,
that reference must also be noted in pg_shdepend so that we know
that the role can't go away without removing the ACL reference.
Otherwise, DROP ROLE could succeed and leave dangling entries
behind, which is what's causing the recent upgrade-check failures
on buildfarm member copperhead.
This has been wrong since pg_init_privs was introduced, but it's
escaped notice because typical pg_init_privs entries would only
mention the bootstrap superuser (pinned) or at worst the owner
of the extension (who can't go away before the extension does).
We lack even a representation of such a role reference for
pg_shdepend. My first thought for a solution was entries listing
pg_init_privs in classid, but that doesn't work because then there's
noplace to put the granted-on object's classid. Rather than adding
a new column to pg_shdepend, let's add a new deptype code
SHARED_DEPENDENCY_INITACL. Much of the associated boilerplate
code can be cribbed from code for SHARED_DEPENDENCY_ACL.
A lot of the bulk of this patch just stems from the new need to pass
the object's owner ID to recordExtensionInitPriv, so that we can
consult it while updating pg_shdepend. While many callers have that
at hand already, a few places now need to fetch the owner ID of an
arbitrary privilege-bearing object. For that, we assume that there
is a catcache on the relevant catalog's OID column, which is an
assumption already made in ExecGrant_common so it seems okay here.
We do need an entirely new routine RemoveRoleFromInitPriv to perform
cleanup of pg_init_privs ACLs during DROP OWNED BY. It's analogous
to RemoveRoleFromObjectACL, but we can't share logic because that
function operates by building a command parsetree and invoking
existing GRANT/REVOKE infrastructure. There is of course no SQL
command that would update pg_init_privs entries when we're not in
process of creating their extension, so we need a routine that can
do the updates directly.
catversion bump because this changes the expected contents of
pg_shdepend. For the same reason, there's no hope of back-patching
this, even though it fixes a longstanding bug. Fortunately, the
case where it's a problem seems to be near nonexistent in the field.
If it weren't for the buildfarm breakage, I'd have been content to
leave this for v18.
Patch by me; thanks to Daniel Gustafsson for review and discussion.
Discussion: https://postgr.es/m/1745535.1712358659@sss.pgh.pa.us
The paragraph in the docs and the comment applied to
sslnegotiaton=direct, but not sslnegotiation=requiredirect. In
'requiredirect' mode, negotiated SSL is never used. Move the paragraph
in the docs under the description of 'direct' mode, and rephrase it.
Also the comment's reference to reusing a plaintext connection was
bogus. Authentication failure in plaintext mode only happens after
sending the startup packet, so the connection cannot be reused.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/CAOYmi+=sj+1uydS0NR4nYzw-LRWp3Q-s5speBug5UCLSPMbvGA@mail.gmail.com
The --tablespace-mapping option was specified with required_argument
rather than no_argument, which is wrong. Since the actual argument
string passed to getopt_long() included "T:", the single-character
form of the option still worked, but the long form did not. Repair.
The call to getopt_long() erroneously included "P", which doesn't
correspond to any supported option. Remove.
The help message used "do not" in one place and "don't" in another.
Standardize on "do not".
The documentation erroneously stated that the tablespace mappings
would be applied relative to the pathnames in the first backup
specified on the command line, rather than the final one. Fix.
Thanks to Tomas Vondra and Daniel Gustafsson for alerting me to
these mistakes.
Discussion: http://postgr.es/m/CA+TgmoYFznwwaZhHSF1Ze7JeyBv-1yOoSrucKMw37WpF=7RP8g@mail.gmail.com
If not all backups have the same checksum status, but the final backup
has checksums enabled, then the output directory may include pages
with invalid checksums. Document this limitation and explain how to
work around it.
In a future release, we may want to teach pg_combinebackup to
recompute page checksums when required, but as feature freeze has come
and gone, it seems a bit too late to do that for this release.
Patch by me, reviewed by Daniel Gustafsson
Discussion: http://postgr.es/m/CA+TgmoZugzOSmgkx97u3pc0M7U8LycWvugqoyWBv6j15a4hE5g@mail.gmail.com
Allow pg_sync_replication_slots() to error out during promotion of standby.
This makes the behavior of the SQL function consistent with the slot sync
worker. We also ensured that pg_sync_replication_slots() cannot be
executed if sync_replication_slots is enabled and the slotsync worker is
already running to perform the synchronization of slots. Previously, it
would have succeeded in cases when the worker is idle and failed when it
is performing sync which could confuse users.
This patch fixes another issue in the slot sync worker where
SignalHandlerForShutdownRequest() needs to be registered *before* setting
SlotSyncCtx->pid, otherwise, the slotsync worker could miss handling
SIGINT sent by the startup process(ShutDownSlotSync) if it is sent before
worker could register SignalHandlerForShutdownRequest(). To be consistent,
all signal handlers' registration is moved to a prior location before we
set the worker's pid.
Ensure that we clean up synced temp slots at the end of
pg_sync_replication_slots() to avoid such slots being left over after
promotion.
Ensure that ShutDownSlotSync() captures SlotSyncCtx->pid under spinlock to
avoid accessing invalid value as it can be reset by concurrent slot sync
exit due to an error.
Author: Shveta Malik
Reviewed-by: Hou Zhijie, Bertrand Drouvot, Amit Kapila, Masahiko Sawada
Discussion: https://postgr.es/m/CAJpy0uBefXUS_TSz=oxmYKHdg-fhxUT0qfjASW3nmqnzVC3p6A@mail.gmail.com
The paragraph describing the JavaScript string literals allowed in
jsonpath expressions unnecessarily mentions JSON by erroneously
listing \v as allowed by JSON and mentioning the \xNN and \u{N...}
backslash escapes as deviations from JSON when in fact both are
accepted by ECMAScript/JavaScript. Fix this by only referring to
JavaScript.
Author: Erik Wienhold <ewie@ewie.name>
Discussion: https://www.postgresql.org/message-id/flat/1EB17DF9-2636-484B-9DD0-3CAB19C4F5C4@justatheory.com
The paragraph on SSL compression is largely describing events which
took place many years ago, so reword with past tense.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/eac70d46-e61c-4d71-a1e1-78e2bfa19485@eisentraut.org
Do not allow ALTER SUBSCRIPTION ... SET (failover = on|off) in a
transaction block as the changed failover option of the slot can't be
rolled back. For the same reason, we refrain from altering the replication
slot's failover property if the subscription is created with a valid
slot_name and create_slot=false.
Reprted-by: Kuroda Hayato
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Bertrand Drouvot, Kuroda Hayato
Discussion: https://postgr.es/m/OS0PR01MB57165542B09DFA4943830BF294082@OS0PR01MB5716.jpnprd01.prod.outlook.com
The documents were clear that queryid should not be assumed to be stable
between major versions but said nothing about minor versions and left
the reader to guess if that was implied by the mention of the
instability of queryid between major versions.
Here we give minor versions an explicit mention to indicate queryid can
generally be assumed stable between minor versions.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAApHDvpYGE6h0cD9UO-eHySPynPj1L3J%3DHxT%2BA7Ud8_Yo6AuzA%40mail.gmail.com
Backpatch-through: 12
The optimization for inserts into BRIN indexes added by c1ec02be1d
relies on a cache that needs to be explicitly released after calling
index_insert(). The commit however failed to invoke the cleanup in
validate_index(), which calls index_insert() indirectly through
table_index_validate_scan().
After inspecting index_insert() callers, it seems unique_key_recheck()
is missing the call too.
Fixed by adding the two missing index_insert_cleanup() calls.
The commit does two additional improvements. The aminsertcleanup()
signature is modified to have the index as the first argument, to make
it more like the other AM callbacks. And the aminsertcleanup() callback
is invoked even if the ii_AmCache is NULL, so that it can decide if the
cleanup is necessary.
Author: Alvaro Herrera, Tomas Vondra
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/202401091043.e3nrqiad6gb7@alvherre.pgsql
These operators were removed by 2f70fdb064 in the v14 cycle but they were
accidentally left in the table of build-in operator classes. Backpatch down
to v14 where the operators where removed.
Author: Aleksander Alekseev <aleksander@timescale.com>
Reported-by: Colin Caine <cmcaine@gmail.com>
Discussion: https://postgr.es/m/CADwQTQbbr2UQ_fpbyc+8ay=RwEYgYk=TZxH3+RHDqAQfoG+EWA@mail.gmail.com
Backpatch-through: v14
This updates the link from pg_createsubscriber to initial data sync
to actually link to the subsection in question as opposed to the
main logical replication section.
Author: Pavel Luzanov <p.luzanov@postgrespro.ru>
Discussion: https://postgr.es/m/a4af555a-ac60-4416-877d-0440d29b8763@postgrespro.ru
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
We don't want users to think that pg_combinebackup is trying to check
the validity of individual backups, because it isn't. Adjust the wording
about sanity checks to make it clear that verification of individual
backups is the job of pg_verifybackup, and that the checks performed
by pg_combinebackup are around the relationships between the backups.
Per discussion with David Steele.
Discussion: http://postgr.es/m/e6f930c3-590c-47b9-b094-217bb2a3e22e@pgmasters.net
This addresses some post-commit review comments for commits 6185c973,
de3600452, and 9425c596a0, with the following changes:
* Fix JSON_TABLE() syntax documentation to use the term
"path_expression" for JSON path expressions instead of
"json_path_specification" to be consistent with the other SQL/JSON
functions.
* Fix a typo in the example code in JSON_TABLE() documentation.
* Rewrite some newly added comments in jsonpath.h.
* In JsonPathQuery(), add missing cast to int before printing an enum
value.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
The code associated with EXEC SQL DEFINE was unreadable and full of
bugs, notably:
* It'd attempt to free a non-malloced string if the ecpg program
tries to redefine a macro that was defined on the command line.
* Possible memory stomp if user writes "-D=foo".
* Undef'ing or redefining a macro defined on the command line would
change the state visible to the next file, when multiple files are
specified on the command line. (While possibly that could have been
an intentional choice, the code clearly intends to revert to the
original macro state; it's just failing to consider this interaction.)
* Missing "break" in defining a new macro meant that redefinition
of an existing name would cause an extra entry to be added to the
definition list. While not immediately harmful, a subsequent undef
would result in the prior entry becoming visible again.
* The interactions with input buffering are subtle and were entirely
undocumented.
It's not that surprising that we hadn't noticed these bugs,
because there was no test coverage at all of either the -D
command line switch or multiple input files. This patch adds
such coverage (in a rather hacky way I guess).
In addition to the code bugs, the user documentation was confused
about whether the -D switch defines a C macro or an ecpg one, and
it failed to mention that you can write "-Dsymbol=value".
These problems are old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/998011.1713217712@sss.pgh.pa.us
Previously, we had consecutive, very short chapters called "Generic
WAL" and "Custom WAL Resource Managers," explaining different approaches
to the same problem. Merge them into a single chapter. Explain most
of the differences between the approaches in the chapter's
introductory text, rather than in the individual sections.
Discussion: http://postgr.es/m/46ac50c1-6b2a-404f-a683-b67af6ab56e9@eisentraut.org
The documentation for SET ROLE states that superusers who switch to
a non-superuser role lose their superuser privileges. While this
is true for most commands, there are exceptions such as SET ROLE
and SET SESSION AUTHORIZATION, which continue to use the current
session user and the authenticated user, respectively.
Furthermore, the description of this command already describes its
effect, so it is arguably unnecessary to include this special case.
This commit removes the note about the superuser case and adds a
sentence about the aforementioned exceptions to the description.
Co-authored-by: Yurii Rashkovskii
Reviewed-by: Shubham Khanna, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CA%2BRLCQysHtME0znk2KUMJN343ksboSRQSU-hCnOjesX6VK300Q%40mail.gmail.com
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
In the libpq encryption negotiation tests, don't run the GSSAPI tests
unless PG_TEST_EXTRA='kerberos' is also set. That makes it possible to
still run most of the tests when GSSAPI support is compiled in, but
there's no MIT Kerberos installation.
The tools.ietf.org site has been decommissioned and replaced by a
number of sites serving various purposes. Links to RFCs and BCPs
are now 301 redirected to their new respective IETF sites. Since
this serves no purpose and only adds network overhead, update our
links to the new locations.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3C1CEA99-FCED-447D-9858-5A579B4C6687@yesql.se
Backpatch-through: v12
A NESTED path allows to extract data from nested levels of JSON
objects given by the parent path expression, which are projected as
columns specified using a nested COLUMNS clause, just like the parent
COLUMNS clause. Rows comprised from a NESTED columns are "joined"
to the row comprised from the parent columns. If a particular NESTED
path evaluates to 0 rows, then the nested COLUMNS will emit NULLs,
making it an OUTER join.
NESTED columns themselves may include NESTED paths to allow
extracting data from arbitrary nesting levels, which are likewise
joined against the rows at the parent level.
Multiple NESTED paths at a given level are called "sibling" paths
and their rows are combined by UNIONing them, that is, after being
joined against the parent row as described above.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
When testing buffer pool logic, it is useful to be able to evict
arbitrary blocks. This function can be used in SQL queries over the
pg_buffercache view to set up a wide range of buffer pool states. Of
course, buffer mappings might change concurrently so you might evict a
block other than the one you had in mind, and another session might
bring it back in at any time. That's OK for the intended purpose of
setting up developer testing scenarios, and more complicated interlocking
schemes to give stronger guararantees about that would likely be less
flexible for actual testing work anyway. Superuser-only.
Author: Palak Chaturvedi <chaturvedipalak1911@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com> (docs, small tweaks)
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Cédric Villemain <cedric.villemain+pgsql@abcsql.com>
Reviewed-by: Jim Nasby <jim.nasby@gmail.com>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CALfch19pW48ZwWzUoRSpsaV9hqt0UPyaBPC4bOZ4W+c7FF566A@mail.gmail.com
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
Replace (expr op C1) OR (expr op C2) ... with expr op ANY(ARRAY[C1, C2, ...])
on the preliminary stage of optimization when we are still working with the
expression tree.
Here Cn is a n-th constant expression, 'expr' is non-constant expression, 'op'
is an operator which returns boolean result and has a commuter (for the case
of reverse order of constant and non-constant parts of the expression,
like 'Cn op expr').
Sometimes it can lead to not optimal plan. This is why there is a
or_to_any_transform_limit GUC. It specifies a threshold value of length of
arguments in an OR expression that triggers the OR-to-ANY transformation.
Generally, more groupable OR arguments mean that transformation will be more
likely to win than to lose.
Discussion: https://postgr.es/m/567ED6CA.2040504%40sigaev.ru
Author: Alena Rybakina <lena.ribackina@yandex.ru>
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
What the documentation calls an exclude_element is an index_elem
according to gram.y, and it allows all the same options that
a CREATE INDEX column specification does. The COLLATE patch
neglected to update the CREATE/ALTER TABLE docs about that,
and later the opclass-parameters patch made the same oversight.
Add those options to the syntax synopses, and polish the
associated text a bit.
Back-patch to v13 where opclass parameters came in. We could
update v12 with just the COLLATE omission, but it doesn't quite
seem worth the trouble at this point.
Shihao Zhong, reviewed by Daniel Vérité, Shubham Khanna and myself
Discussion: https://postgr.es/m/CAGRkXqShbVyB8E3gapfdtuwiWTiK=Q67Qb9qwxu=+-w0w46EBA@mail.gmail.com
This patch generalizes libpq's existing single-row mode to allow
individual partial-result PGresults to contain up to N rows, rather
than always one row. This reduces malloc overhead compared to plain
single-row mode, and it is very useful for psql's FETCH_COUNT feature,
since otherwise we'd have to add code (and cycles) to either merge
single-row PGresults into a bigger one or teach psql's
results-printing logic to accept arrays of PGresults.
To avoid API breakage, PQsetSingleRowMode() remains the same, and we
add a new function PQsetChunkedRowsMode() to invoke the more general
case. Also, PGresults obtained the old way continue to carry the
PGRES_SINGLE_TUPLE status code, while if PQsetChunkedRowsMode() is
used then their status code is PGRES_TUPLES_CHUNK. The underlying
logic is the same either way, though.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
This new DDL command merges several partitions into the one partition of the
target table. The target partition is created using new
createPartitionTable() function with parent partition as the template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
The BAS_VACUUM ring size has been 256kB since commit d526575f introduced
the mechanism 17 years ago. Commit 1cbbee03 recently made it
configurable but retained the traditional default. The correct default
size has been debated for years, but 256kB is certainly very small.
VACUUM soon needs to write back data it dirtied only 32 blocks ago,
which usually requires flushing the WAL. New experiments in prefetching
pages for VACUUM exacerbated the problem by crashing into dirty data
even sooner. Let's make the default 2MB. That's 1.6% of the default
toy buffer pool size, and 0.2% of 1GB, which would be a considered a
small shared_buffers setting for a real system these days. Users are
still free to set the GUC to a different value.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240403221257.md4gfki3z75cdyf6%40awork3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGLY4Q4ZY4f1rvnFtv6%2BPkjNf8MejdPkcju3Qii9DYqqcQ%40mail.gmail.com
Adds --clone/--copy-file-range options to pg_combinebackup, to allow
copying files using file cloning or copy_file_range(). These methods may
be faster than the standard block-by-block copy, but the main advantage
is that they enable various features provided by CoW filesystems.
This commit only uses these copy methods for files that did not change
and can be copied as a whole from a single backup.
These new copy methods may not be available on all platforms, in which
case the command throws an error (immediately, even if no files would be
copied as a whole). This early failure seems better than failing later
when trying to copy the first file, after performing a lot of work on
earlier files.
If the requested copy method is available, but a checksum needs to be
recalculated (e.g. because of a different checksum type), the file is
still copied using the requested method, but it is also read for the
checksum calculation. Depending on the filesystem this may be more
expensive than just performing the simple copy, but it does enable the
CoW benefits.
Initial patch by Jakub Wartak, various reworks and improvements by me.
Author: Tomas Vondra, Jakub Wartak
Reviewed-by: Thomas Munro, Jakub Wartak, Robert Haas
Discussion: https://postgr.es/m/3024283a-7491-4240-80d0-421575f6bb23%40enterprisedb.com
The documentation index is getting very long, which makes it hard
to find things. Since these chapters are all very similar in structure
and content, merging them is a natural way of reducing the size of
the toplevel index.
Rather than actually combining all of the SGML into a single file,
keep one file per <sect1>, and add a glue file that includes all
of them.
Discussion: http://postgr.es/m/CA+Tgmob7_uoYuS2=rVwpVXaRwP-UXz+++saYTC-BCZ42QzSNKQ@mail.gmail.com
This commit does two things:
1) Maintains inactive_since for sync slots whenever the slot is released
just like any other regular slot.
2) Ensures the value is set to the current timestamp during the promotion
of standby to help correctly interpret the time after promotion. We don't
want the slots to appear inactive for a long time after promotion if they
haven't been synchronized recently. This would also avoid the invalidation
of such slots immediately after promotion if tomorrow we have a feature
that invalidates slots based on their inactivity time. Whoever acquires
the slot i.e. makes the slot active will reset it to NULL.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik, Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1KrPGwfZV9LYGidjxHeW+rxJ=E2ThjXvwRGLO=iLNuo=Q@mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmob_Ta-t2ty8QrKHBGnNLrf4ZYcwhGHGFsuUoFrAEDw4sA@mail.gmail.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
EXPLAIN (ANALYZE, SERIALIZE) allows collection of statistics about
the volume of data emitted by a query, as well as the time taken
to convert the data to the on-the-wire format. Previously there
was no way to investigate this without actually sending the data
to the client, in which case network transmission costs might
swamp what you wanted to see. In particular this feature allows
investigating the costs of de-TOASTing compressed or out-of-line
data during formatting.
Stepan Rutz and Matthias van de Meent,
reviewed by Tomas Vondra and myself
Discussion: https://postgr.es/m/ca0adb0e-fa4e-c37e-1cd7-91170b18cae1@gmx.de
Presently, the archiver process restarts when an archive callback
ERRORs. To avoid this, archive module authors can use sigsetjmp(),
manage a memory context, etc., but that requires a lot of extra
code that will likely look roughly the same between modules. This
commit adds basic archive callback ERROR handling to pgarch.c so
that module authors won't ordinarily need to worry about this.
While this built-in handler attempts to clean up anything that an
archive module could conceivably have left behind, it is possible
that some modules are doing unexpected things that require
additional cleanup. Module authors should be sure to do any extra
required cleanup in a PG_CATCH block within the archiving callback.
The archiving callback is now called in a short-lived memory
context that the archiver process resets between invocations. If a
module requires longer-lived storage, it must maintain its own
memory context.
Thanks to these changes, the basic_archive module can be greatly
simplified.
Suggested-by: Andres Freund
Reviewed-by: Andres Freund, Yong Li
Discussion: https://postgr.es/m/20230217215624.GA3131134%40nathanxps13
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
