columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
proposal for OUT parameter support. The columns don't actually *do*
anything yet, they are just left NULLs. But I thought I'd commit this
part separately as a fairly pure example of the tasks needed when adding
a column to pg_proc or one of the other core system tables.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
of the entries used to be zero, which I think I had deliberately done in
the name of saving cycles during ANALYZE, but it was really a rather
foolish decision. Some of the more complex views in information_schema
were getting really bad plans for lack of statistics on the columns they
were joining over.
I'm not forcing an initdb for this, but I think there will be one soon
anyway to repair some bugs in the information_schema views.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
