parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
to note:
1) arttype is numeric. I thought this was the best way of allowing
arbitarily large factorials, even though factorial(2^63) is a large
number. Happy to change to integers if this is overkill.
2) since we're accepting numeric arguments, the patch tests for floats.
If a numeric is passed with non-zero decimal portion, an error is raised
since (from memory) they are undefined.
Gavin Sherry
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
of the entries used to be zero, which I think I had deliberately done in
the name of saving cycles during ANALYZE, but it was really a rather
foolish decision. Some of the more complex views in information_schema
were getting really bad plans for lack of statistics on the columns they
were joining over.
I'm not forcing an initdb for this, but I think there will be one soon
anyway to repair some bugs in the information_schema views.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
Per recent discussion, this does not work because other backends can't
reliably see tuples in a temp table and so cannot run the RI checks
correctly. Seems better to disallow this case than go back to accessing
temp tables through shared buffers. Also, disallow FK references to
ON COMMIT DELETE ROWS tables. We already caught this problem for normal
TRUNCATE, but the path used by ON COMMIT didn't check.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
CREATE TABLE (or ALTER TABLE SET DEFAULT), rather than postponing it to
the time that the default is inserted into an INSERT command by the
rewriter. This reverses an old decision that was intended to make the
world safe for writing
f1 timestamp default 'now'
but in fact merely made the failure modes subtle rather than obvious.
Per recent trouble report and followup discussion.
initdb forced since there is a chance that stored default expressions
will change.
ANYELEMENT. The effect is to postpone typechecking of the function
body until runtime. Documentation is still lacking.
Original patch by Joe Conway, modified to postpone type checking
by Tom Lane.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
single-byte encodings, and a direct C implementation of the single-argument
forms (where spaces are always what gets trimmed). This is in preparation
for using rtrim1() as the bpchar-to-text cast operator, but is a useful
performance improvement even if we decide not to do that.
This makes no difference for existing uses, but allows SelectSortFunction()
and pred_test_simple_clause() to use indexscans instead of seqscans to
locate entries for a particular operator in pg_amop. Better yet, they can
use the SearchSysCacheList() API to cache the search results.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
