Commit 054325c5ee created a memory leak in PQsendQueryInternal in case
an error occurs while sending the message. Repair.
Backpatch to 14, like that commit. Reported by Coverity.
We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).
Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery. Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.
The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline". This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received. (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)
This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.
A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure. This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.
To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized. It's harmless
(and hopefully inexpensive) to do that more than once.
Per bug #17514 from Okano Naoki. The problem's ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
ecpg_raise_backend() blithely assumed that PG_DIAG_MESSAGE_PRIMARY
would always be present, and would end up passing a NULL string
pointer to snprintf when it isn't. That would typically crash
before 3779ac62d, and it would fail to provide a useful error report
in any case. Best practice is to substitute PQerrorMessage(conn)
in such cases, so do that.
Per bug #17421 from Masayuki Hirose. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17421-790ff887e3188874@postgresql.org
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db6 missed
this. Back-patch to v10 (all supported versions).
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
Back-patch of a59c79564 and 50f03473e into all supported branches.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
This reverts commits ab27df2, af8d530 and 3a0cced, that introduced
pg_cryptohash_error(). In order to make the core code able to pass down
the new error types that this introduced, some of the MD5-related
routines had to be reworked, causing an ABI breakage, but we found that
some external extensions rely on them. Maintaining compatibility
outweights the error report benefits, so just revert the change in v14.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/9f0c0a96d28cf14fc87296bbe67061c14eb53ae8.camel@cybertec.at
Experimenting with FIPS mode enabled, I saw
regression=# \password joe
Enter new password for user "joe":
Enter it again:
could not encrypt password: disabled for FIPS
out of memory
because PQencryptPasswordConn was still of the opinion that "out of
memory" is always appropriate to print.
Minor oversight in b69aba745. Like that one, back-patch to v14.
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
Commits ffa2e4670 and 52a10224e caused libpq's connection-establishment
functions to usually leave a nonempty string in the connection's
errorMessage buffer, even after a successful connection. While that
was intentional on my part, more sober reflection says that it wasn't
a great idea: the string would be a bit confusing. Also this broke at
least one application that checked for connection success by examining
the errorMessage, instead of using PQstatus() as documented. Let's
clear the buffer at success exit, restoring the pre-v14 behavior.
Discussion: https://postgr.es/m/4170264.1620321747@sss.pgh.pa.us
An out-of-memory failure happening when allocating the structures to
store the connection parameter keywords and values would mess up with
the set of connections saved, as on failure the pthread mutex would
still be hold with the new connection object listed but free()'d.
Rather than just unlocking the mutex, which would leave the static list
of connections into an inconsistent state, move the allocation for the
structures of the connection parameters before beginning the test
manipulation. This ensures that the list of connections and the
connection mutex remain consistent all the time in this code path.
This error is unlikely going to happen, but this could mess up badly
with ECPG clients in surprising ways, so backpatch all the way down.
Reported-by: ryancaicse
Discussion: https://postgr.es/m/17186-b4cfd8f0eb4d1dee@postgresql.org
Backpatch-through: 9.6
This commit improves the ecpg's error message that commit f576de1db1 updated,
so that it gets rid of trailing period and uppercases the command name
in the error message.
Back-patch to v14 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
Commit ffa2e4670 changed libpq so that multiple error reports
occurring during one operation (a connection attempt or query)
are accumulated in conn->errorMessage, where before new ones
usually replaced any prior error. At least in theory, that makes
us more vulnerable to running out of memory for the errorMessage
buffer. If it did happen, the user would be left with just an
empty-string error report, which is pretty unhelpful.
We can improve this by relying on pqexpbuffer.c's existing "broken
buffer" convention to track whether we've hit OOM for the current
operation's error string, and then substituting a constant "out of
memory" string in the small number of places where the errorMessage
is read out.
While at it, apply the same method to similar OOM cases in
pqInternalNotice and pqGetErrorNotice3.
Back-patch to v14 where ffa2e4670 came in. In principle this could
go back further; but in view of the lack of field reports, the
hazard seems negligible in older branches.
Discussion: https://postgr.es/m/530153.1627425648@sss.pgh.pa.us
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
The original coding required that PQpipelineSync had been called before
the first call to PQgetResult, and failure to do that would result in an
unexpected NULL result being returned. Fix by setting the right state
when a query is sent, rather than leaving it unchanged and having
PQpipelineSync apply the necessary state change.
A new test case to verify the behavior is added, which relies on the new
PQsendFlushRequest() function added by commit a7192326c7.
Backpatch to 14, where pipeline mode was added.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/boris.20210616110321@codesynthesis.com
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
Commit c0cb87fbb unwisely introduced a dependency on the StringInfo
machinery in fe-connect.c. We must not use that in libpq, because
it will do a summary exit(1) if it hits OOM, and that is not
appropriate behavior for a general-purpose library. The goal of
allowing arbitrary line lengths in service files doesn't seem like
it's worth a lot of effort, so revert back to the previous method
of using a stack-allocated buffer and failing on buffer overflow.
This isn't an exact revert though. I kept that patch's refactoring
to have a single exit path, as that seems cleaner than having each
error path know what to do to clean up. Also, I made the fixed-size
buffer 1024 bytes not 256, just to push off the need for an expandable
buffer some more.
There is more to do here; in particular the lack of any mechanical
check for this type of mistake now seems pretty hazardous. But this
fix gets us back to the level of robustness we had in v13, anyway.
Discussion: https://postgr.es/m/daeb22ec6ca8ef61e94d766a9b35fb03cabed38e.camel@vmware.com
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
We had a request to provide a way to test at compile time for the
availability of the new pipeline features. More generally, it
seems like a good idea to provide a way to test via #ifdef for
all new libpq API features. People have been using the version
from pg_config.h for that; but that's more likely to represent the
server version than the libpq version, in the increasingly-common
scenario where they're different. It's safer if libpq-fe.h itself
is the source of truth about what features it offers.
Hence, establish a policy that starting in v14 we'll add a suitable
feature-is-present macro to libpq-fe.h when we add new API there.
(There doesn't seem to be much point in applying this policy
retroactively, but it's not too late for v14.)
Tom Lane and Alvaro Herrera, per suggestion from Boris Kolpackov.
Discussion: https://postgr.es/m/boris.20210617102439@codesynthesis.com
Commit acb7e4eb6b added a new implementation for PQsendQuery so that
it works in pipeline mode (by using extended query protocol), but it
behaves differently from the 'Q' message (in simple query protocol) used
by regular implementation: the new one doesn't close the unnamed portal.
Change the new code to have identical behavior to the old.
Reported-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106072107.d4i55hdscxqj@alvherre.pgsql
We have a dozen PQset*() functions. PQresultSetInstanceData() and this
were the libpq setter functions having a different word order. Adopt
the majority word order.
Reviewed by Alvaro Herrera and Robert Haas, though this choice of name
was not unanimous.
Discussion: https://postgr.es/m/20210605060555.GA216695@rfd.leadboat.com
Buildfarm member hamerkop has been reporting that two cases in
connect/test5.pgc show different error messages than the test expects,
because since commit ffa2e4670 libpq's connection failure messages
are exposing the fact that a GSS-encrypted connection was attempted
and failed. That's pretty interesting information in itself, and
I certainly don't wish to shoot the messenger, but we need to do
something to stabilize the ECPG results.
For the second of these two failure cases, we can add the
gssencmode=disable option to prevent the discrepancy. However,
that solution is problematic for the first failure, because the only
unique thing about that case is that it's testing a completely-omitted
connection target; there's noplace to add the option without defeating
the point of the test case. After some thrashing around with
alternative fixes that turned out to have undesirable side-effects,
the most workable answer is just to give up and remove that test case.
Perhaps we can revert this later, if we figure out why the GSS code
is misbehaving in hamerkop's environment.
Thanks to Michael Paquier for exploration of alternatives.
Discussion: https://postgr.es/m/YLRZH6CWs9N6Pusy@paquier.xyz
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
Fix handling of NULL host name (possibly by using hostaddr). It
previously crashed. Also, we should look at connhost, not pghost, to
handle multi-host specifications.
Also remove an unnecessary SSL_CTX_free().
Reported-by: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/504c276ab6eee000bb23d571ea9b0ced4250774e.camel@vmware.com
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
