Using the full width of the CPU's native word size shouldn't cost
anything in typical cases. When working with large bitmapsets,
this halves the number of operations needed for many common BMS
operations. On the right sort of test case, a measurable improvement
is obtained.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f9EGBd2h-VkXvb=51tf+X46zMX5T8h-KYgXEV_u2zmLUw@mail.gmail.com
This works very much like the existing bms_last_member function, only it
traverses through the Bitmapset in the opposite direction from the most
significant bit down to the least significant bit. A special prevbit value of
-1 may be used to have the function determine the most significant bit. This
is useful for starting a loop. When there are no members less than prevbit,
the function returns -2 to indicate there are no more members.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-K=3d5MDASNYFJpUpc20xcBnAwNC1-AOeunhn0OtkWbQ@mail.gmail.com
Commit ab7271677 introduced code that attempts to order the child
scans of a Parallel Append node in a way that will minimize execution
time, based on total cost and startup cost. However, it failed to
think hard about what to do when estimated costs are exactly equal;
a case that's particularly likely to occur when comparing on startup
cost. In such a case the ordering of the child paths would be left
to the whims of qsort, an algorithm that isn't even stable.
We can improve matters by applying the rule used elsewhere in the
planner: if total costs are equal, sort on startup cost, and
vice versa. When both cost estimates are exactly equal, rather
than letting qsort do something unpredictable, sort based on the
child paths' relids, which should typically result in sorting in
inheritance order. (The latter provision requires inventing a
qsort-style comparator for bitmapsets, but maybe we'll have use
for that for other reasons in future.)
This results in a few plan changes in the select_parallel test,
but those all look more reasonable than before, when the actual
underlying cost numbers are taken into account.
Discussion: https://postgr.es/m/4944.1515446989@sss.pgh.pa.us
This will be used by pending patches to improve partition pruning.
Amit Langote and Kyotaro Horiguchi, per a suggestion from David
Rowley. Review and testing of the larger patch set of which this is a
part by Ashutosh Bapat, David Rowley, Dilip Kumar, Jesper Pedersen,
Rajkumar Raghuwanshi, Beena Emerson, Amul Sul, and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
This patch adds a function that replaces a bms_membership() test followed
by a bms_singleton_member() call, performing both the test and the
extraction of a singleton set's member in one scan of the bitmapset.
The performance advantage over the old way is probably minimal in current
usage, but it seems worthwhile on notational grounds anyway.
David Rowley
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
