and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
in favor of looking at the flat file copy of pg_database during backend
startup. This should finally eliminate the various corner cases in which
backend startup fails unexpectedly because it isn't able to distinguish
live and dead tuples in pg_database. Simplify locking on pg_database
to be similar to the rules used with pg_shadow and pg_group, and eliminate
FlushRelationBuffers operations that were used only to reduce the odds
of failure of GetRawDatabaseInfo.
initdb forced due to addition of a trigger to pg_database.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
It works on the principle of turning sockets into non-blocking, and then
emulate blocking behaviour on top of that, while allowing signals to
run. Signals are now implemented using an event instead of APCs, thus
getting rid of the issue of APCs not being compatible with "old style"
sockets functions.
It also moves the win32 specific code away from pqsignal.h/c into
port/win32, and also removes the "thread style workaround" of the APC
issue previously in place.
In order to make things work, a few things are also changed in pgstat.c:
1) There is now a separate pipe to the collector and the bufferer. This
is required because the pipe will otherwise only be signalled in one of
the processes when the postmaster goes down. The MS winsock code for
select() must have some kind of workaround for this behaviour, but I
have found no stable way of doing that. You really are not supposed to
use the same socket from more than one process (unless you use
WSADuplicateSocket(), in which case the docs specifically say that only
one will be flagged).
2) The check for "postmaster death" is moved into a separate select()
call after the main loop. The previous behaviour select():ed on the
postmaster pipe, while later explicitly saying "we do NOT check for
postmaster exit inside the loop".
The issue was that the code relies on the same select() call seeing both
the postmaster pipe *and* the pgstat pipe go away. This does not always
happen, and it appears that useing WSAEventSelect() makes it even more
common that it does not.
Since it's only called when the process exits, I don't think using a
separate select() call will have any significant impact on how the stats
collector works.
Magnus Hagander
of fighting it, avoid hard-wired (and wrong) assumption about max length
of prefix, cause %l to actually work as documented, don't compute data
we may not need.
#log_line_prefix = '' # e.g. '<%u%%%d> '
# %u=user name %d=database name
# %r=remote host and port
# %p=PID %t=timestamp %i=command tag
# %c=session id %l=session line number
# %s=session start timestamp
# %x=stop here in non-session processes
# %%='%'
Andrew Dunstan
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
valgrind: a buffer passed to strncmp() had to be NUL-terminated. Original
report and patch from Dennis Bjorkland, some cleanup by Andrew Dunstan,
and finally some editorializing from Neil Conway.
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
---------------------------------------------------------------------------
here is a patch that allows CIDR netmasks in pg_hba.conf. It allows two
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
Andrew Dunstan
protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
