more completely. The motivation for having it understand IS NULL at all was
to allow use of "foo IS NULL" as one of the subsets of a partitioning on
"foo", but as reported by Aleksander Kmetec, it wasn't really getting the job
done. Backpatch to 8.2 since this is arguably a performance bug.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
competing alternatives for indexes to use in a bitmap scan. The former
coding took estimated selectivity as an overriding factor, causing it to
sometimes choose indexes that were much slower to scan than ones with a
slightly worse selectivity. It was also too narrow-minded about which
combinations of indexes to consider ANDing. The rewrite makes it pay more
attention to index scan cost than selectivity; this seems sane since it's
impossible to have very bad selectivity with low cost, whereas the reverse
isn't true. Also, we now consider each index alone, as well as adding
each index to an AND-group led by each prior index, for a total of about
O(N^2) rather than O(N) combinations considered. This makes the results
much less dependent on the exact order in which the indexes are
considered. It's still a lot cheaper than an O(2^N) exhaustive search.
A prefilter step eliminates all but the cheapest of those indexes using
the same set of WHERE conditions, to keep the effective value of N down in
scenarios where the DBA has created lots of partially-redundant indexes.
fast flow of new fsync requests can prevent mdsync() from ever completing.
This was an unforeseen consequence of a patch added in Mar 2006 to prevent
the fsync request queue from overflowing. Problem identified by Heikki
Linnakangas and independently by ITAGAKI Takahiro; fix based on ideas from
Takahiro-san, Heikki, and Tom.
Back-patch as far as 8.1 because a previous back-patch introduced the problem
into 8.1 ...
return void ends with a SELECT, if that SELECT has a single result that is
also of type void. Without this, it's hard to write a void function that
calls another void function. Per gripe from Peter.
Back-patch as far as 8.0.
will be released by transaction abort before _bt_end_vacuum gets called.
If either of these "can't happen" errors actually happened, we'd freeze up
trying to acquire an already-held lock. Latest word is that this does
not explain Martin Pitt's trouble report, but it still looks like a bug.
executed in read_only mode. This could lead to various relatively-subtle
failures, such as an allegedly stable function returning non-stable results.
Bug goes all the way back to the introduction of read-only mode in 8.0.
Per report from Gaetano Mendola.
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
even if none of the fields in the pg_class row change. This behavior is
necessary to ensure other backends flush rd_targblock values that might
point to truncated-away pages. We got this right pre-8.2 but it was broken
by overoptimistic change to not write out the pg_class row if unchanged.
Per report from Pavan Deolasee.
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
JOIN quals, just like WHERE quals, even if they reference every one of the
join's relations. Now that we can reorder outer and inner joins, it's
possible for such a qual to end up being assigned to an outer join plan node,
and we mustn't have it treated as a join qual rather than a filter qual for
the node. (If it were, the join could produce null-extended rows that it
shouldn't.) Per bug report from Pelle Johansson.
be checked at plan levels below the top; namely, we have to allow for Result
nodes inserted just above a nestloop inner indexscan. Should think about
using the general Param mechanism to pass down outer-relation variables, but
for the moment we need a back-patchable solution. Per report from Phil Frost.
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
WHERE clauses. createplan.c is now willing to stick a gating Result node
almost anywhere in the plan tree, and in particular one can wind up directly
underneath a MergeJoin node. This means it had better be willing to handle
Mark/Restore. Fortunately, that's trivial in such cases, since we can just
pass off the call to the input node (which the planner has previously ensured
can handle Mark/Restore). Per report from Phil Frost.
that overlap an outer join's min_righthand but aren't fully contained in it,
to support joining within the RHS after having performed an outer join that
can commute with this one. Aside from the direct fix in make_join_rel(),
fix has_join_restriction() and GEQO's desirable_join() to consider this
possibility. Per report from Ian Harding.
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
out that ExecEvalVar and friends don't necessarily have access to a tuple
descriptor with correct typmod: it definitely can contain -1, and possibly
might contain other values that are different from the Var's value.
Arguably this should be cleaned up someday, but it's not a simple change,
and in any case typmod discrepancies don't pose a security hazard.
Per reports from numerous people :-(
I'm not entirely sure whether the failure can occur in 8.0 --- the simple
test cases reported so far don't trigger it there. But back-patch the
change all the way anyway.
had stopped working for tables buried inside views or sub-selects. This is
because I had gotten rid of the simplify_jointree() preprocessing step, and
optimize_minmax_aggregates() wasn't smart enough to deal with a non-canonical
FromExpr. Per gripe from Bill Howe.
threshold for tuple length. On 4-byte-MAXALIGN machines, the toast code
creates tuples that have t_len exactly TOAST_TUPLE_THRESHOLD ... but this
number is not itself maxaligned, so if heap_insert maxaligns t_len before
comparing to TOAST_TUPLE_THRESHOLD, it'll uselessly recurse back to
tuptoaster.c, wasting cycles. (It turns out that this does not happen on
8-byte-MAXALIGN machines, because for them the outer MAXALIGN in the
TOAST_MAX_CHUNK_SIZE macro reduces TOAST_MAX_CHUNK_SIZE so that toast tuples
will be less than TOAST_TUPLE_THRESHOLD in size. That MAXALIGN is really
incorrect, but we can't remove it now, see below.) There isn't any particular
value in maxaligning before comparing to the thresholds, so just don't do
that, which saves a small number of cycles in itself.
These numbers should be rejiggered to minimize wasted space on toast-relation
pages, but we can't do that in the back branches because changing
TOAST_MAX_CHUNK_SIZE would force an initdb (by changing the contents of toast
tables). We can move the toast decision thresholds a bit, though, which is
what this patch effectively does.
Thanks to Pavan Deolasee for discovering the unintended recursion.
Back-patch into 8.2, but not further, pending more testing. (HEAD is about
to get a further patch modifying the thresholds, so it won't help much
for testing this form of the patch.)
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
versus varchar[]. This oversight probably explains Ryan Holmes' recent
complaint --- he was getting a generic selectivity estimate instead of
anything intelligent.
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
DROP TABLE and DROP DATABASE. Should prevent unexpected "permission denied"
failures on Windows, and is cleaner on other platforms too since we no longer
have to take it on faith that ENOENT is okay during an fsync attempt.
Patched as far back as 8.1; per recent discussion I think we are not going
to worry about Windows-specific issues in 8.0 anymore.
input in the stats collector. Our select() emulation is apparently buggy
for UDP sockets :-(. This should resolve problems with stats collection
(and hence autovacuum) failing under more than minimal load. Diagnosis
and patch by Magnus Hagander.
Patch probably needs to be back-ported to 8.1 and 8.0, but first let's
see if it makes the buildfarm happy...
page about the maximum UTF8 sequence length we support (4 bytes since 8.1,
3 before that). pg_utf2wchar_with_len never got updated to support 4-byte
characters at all, and in any case had a buffer-overrun risk in that it
could produce multiple pg_wchars from what mblen claims to be just one UTF8
character. The only reason we don't have a major security hole is that most
callers allocate worst-case output buffers; the sole exception in released
versions appears to be pre-8.2 iwchareq() (ie, ILIKE), which can be crashed
due to zeroing out its return address --- but AFAICS that can't be exploited
for anything more than a crash, due to inability to control what gets written
there. Per report from James Russell and Michael Fuhr.
Pre-8.1 the risk is much less, but I still think pg_utf2wchar_with_len's
behavior given an incomplete final character risks buffer overrun, so
back-patch that logic change anyway.
This patch also makes sure that UTF8 sequences exceeding the supported
length (whichever it is) are consistently treated as error cases, rather
than being treated like a valid shorter sequence in some places.
