Observed that the sanitizer reported memory leak as clean up is not done
before the process termination in negative/following cases:
**- when we passed '--invalid' as option to redis-server.**
```
-vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
=================================================================
==865778==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f0985f65867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x558ec86686ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x558ec86686ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x558ec86686ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x558ec86686ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x558ec865dd7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x558ec87a1be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x558ec87a13b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x558ec85e6f15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7f09856e5d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
```
**- when we pass '--port' as option and missed to add port number to redis-server.**
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
=================================================================
==865846==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1f867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x557e8b04f6ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x557e8b04f6ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x557e8b04f6ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x557e8b04f6ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x557e8b044d7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Indirect leak of 10 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1fc18 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x557e8b04f9aa in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:287
#2 0x557e8b04f9aa in ztryrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:317
#3 0x557e8b04f9aa in zrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:342
#4 0x557e8b033f90 in _sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:271
#5 0x557e8b033f90 in sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:295
#6 0x557e8b033f90 in sdscatlen /home/ubuntu/mem-leak-issue/redis/src/sds.c:486
#7 0x557e8b044e1f in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1165
#8 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#9 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#10 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#11 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 18 byte(s) leaked in 2 allocation(s).
```
As part analysis found that the sdsfreesplitres is not called when this condition checks are being hit.
Output after the fix:
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
vm:~/mem-leak-issue/redis$
===========================================
vm:~/mem-leak-issue/redis$ ./src/redis-server --jdhg
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'jdhg'
Bad directive or wrong number of arguments
---------------------------------------------------------------------------
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
```
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds API
- RedisModule_CommandFilterGetClientId()
Includes addition to commandfilter test module to validate that it works
by performing the same command from 2 different clients
auxHumanNodenameGetter limited to %.40s, since we did not limit the
length of config cluster-announce-human-nodename, %.40s will cause
nodename data loss (we will persist it in nodes.conf).
Additional modified auxHumanNodenamePresent to use sdslen.
In the original implementation, the time complexity of the commands
is actually O(N*M), where N is the number of patterns the client is
already subscribed and M is the number of patterns to subscribe to.
The docs are all wrong about this.
Specifically, because the original client->pubsub_patterns is a list,
so we need to do listSearchKey which is O(N). In this PR, we change it
to a dict, so the search becomes O(1).
At the same time, both pubsub_channels and pubsubshard_channels are dicts.
Changing pubsub_patterns to a dictionary improves the readability and
maintainability of the code.
This PR adds a human readable name to a node in clusters that are visible as part of error logs. This is useful so that admins and operators of Redis cluster have better visibility into failures without having to cross-reference the generated ID with some logical identifier (such as pod-ID or EC2 instance ID). This is mentioned in #8948. Specific nodenames can be set by using the variable cluster-announce-human-nodename. The nodename is gossiped using the clusterbus extension in #9530.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
## Issue:
When a dict has a long chain or the length of the chain is longer than
the number of samples, we will never be able to sample the elements
at the end of the chain using dictGetSomeKeys().
This could mean that SRANDMEMBER can be hang in and endless loop.
The most severe case, is the pathological case of when someone uses SCAN+DEL
or SSCAN+SREM creating an unevenly distributed dict.
This was amplified by the recent change in #11692 which prevented a
down-sizing rehashing while there is a fork.
## Solution
1. Before, we will stop sampling when we reach the maximum number
of samples, even if there is more data after the current chain.
Now when we reach the maximum we use the Reservoir Sampling
algorithm to fairly sample the end of the chain that cannot be sampled
2. Fix the rehashing code, so that the same as it allows rehashing for up-sizing
during fork when the ratio is extreme, it will allow it for down-sizing as well.
Issue was introduced (or became more severe) by #11692
Co-authored-by: Oran Agra <oran@redislabs.com>
In SPOP, when COUNT is greater than or equal to set's size,
we will remove the set. In dbDelete, we will do DEL or UNLINK
according to the lazy flag. This is also required for propagate.
In RESTORE, we won't store expired keys into the db, see #7472.
When used together with REPLACE, it should emit a DEL or UNLINK
according to the lazy flag.
This PR also adds tests to cover the propagation. The RESTORE
test will also cover #7472.
* Add command being unblocked cause another command to get unblocked execution order test
In #12301, we observed that if the
`while(listLength(server.ready_keys) != 0)`
in handleClientsBlockedOnKeys is changed to
`if(listLength(server.ready_keys) != 0)`,
the order of command execution will change.
It is wrong to change that. It means that if a command
being unblocked causes another command to get unblocked
(like a BLMOVE would do), then the new unblocked command
will wait for later to get processed rather than right away.
It'll not have any real implication if we change that since
we do call handleClientsBlockedOnKeys in beforeSleep again,
and redis will still behave correctly, but we don't change that.
An example:
1. $rd1 blmove src{t} dst{t} left right 0
2. $rd2 blmove dst{t} src{t} right left 0
3. $rd3 set key1{t}, $rd3 lpush src{t}, $rd3 set key2{t} in a pipeline
The correct order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. lmove dst{t} src{t} right left
5. set key2{t}
The wrong order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. set key2{t}
5. lmove dst{t} src{t} right left
This PR adds corresponding test to cover it.
* Add comment near while(listLength(server.ready_keys) != 0)
While Redis loading data from disk (AOF or RDB), modules will get
key space notifications. In such stage the module should not register
any PEJ, the main reason this is forbidden is that PEJ purpose is to
perform a write operation as a reaction to the key space notification.
Write operations should not be performed while loading data and so
there is no reason to register a PEJ.
Same argument also apply to readonly replica. module should not
perform any writes as a reaction to key space notifications and so it
should not register a PEJ.
If a module need to perform some other task which is not involve
writing, he can do it on the key space notification callback itself.
This change only affects keys with expiry time.
For SETEX, the average improvement is 5%, and for GET with
expiation key, we gain a improvement of 13%.
When keys have expiration time, Redis has an assertion to look
up the main dict every time when it touches the expires.
This comes with a performance const, especially during rehash.
the damage will be double.
It looks like that assert was added some ten years old, maybe out
of paranoia, and there's probably no reason to keep it at that cost.
For the XREADGROUP BLOCK > scenario, there is an endless loop.
Due to #11012, it keep going, reprocess command -> blockForKeys -> reprocess command
The right fix is to avoid an endless loop in handleClientsBlockedOnKey and handleClientsBlockedOnKeys,
looks like there was some attempt in handleClientsBlockedOnKeys but maybe not sufficiently good,
and it looks like using a similar trick in handleClientsBlockedOnKey is complicated.
i.e. stashing the list on the stack and iterating on it after creating a fresh one for future use,
is problematic since the code keeps accessing the global list.
Co-authored-by: Oran Agra <oran@redislabs.com>
This will increase the size of an already large COB (one already passed
the threshold for disconnection)
This could also mean that we'll attempt to write that data to the socket
and the replica will manage to read it, which will result in an
undesired partial sync (undesired for the test)
In 7.2, After 971b177fa we make sure (assert) that
the duration has been recorded when resetting the client.
This is not true for rejected commands.
The use case I found is a blocking command that an ACL rule changed before
it was unblocked, and while reprocessing it, the command rejected and triggered the assert.
The PR reset the command duration inside rejectCommand / rejectCommandSds.
Co-authored-by: Oran Agra <oran@redislabs.com>
This leak will only happen in loadServerConfigFromString,
that is, when we are loading a redis.conf, and the user is wrong.
Because it happens in loadServerConfigFromString, redis will
exit if there is an error, so this is actually just a cleanup.
We check lazyfree_lazy_server_del in sunionDiffGenericCommand
to see if we need to lazyfree the temp set. Now do the same in
zunionInterDiffGenericCommand to lazyfree the temp zset.
This is a minor change, follow #5903. Also improved the comments.
Additionally, avoid creating unused zset object in ZINTERCARD,
results in some 10% performance improvement.
So far clients being blocked and unblocked by a module command would
update the c->woff variable and so WAIT was ineffective and got released
without waiting for the command actions to propagate.
This seems to have existed since forever, but not for RM_BlockClientOnKeys.
It is problematic though to know if the module did or didn't propagate
anything in that command, so for now, instead of adding an API, we'll
just update the woff to the latest offset when unblocking, this will
cause the client to possibly wait excessively, but that's not that bad.
XREAD only supports a special ID of $ and XREADGROUP only supports ^.
make sure not to suggest the wrong one when rerunning an error about unbalanced ID arguments
Co-authored-by: Oran Agra <oran@redislabs.com>
Rather than a fixed iovcnt for connWritev, support maxiov per connection type instead.
A minor change to reduce memory for struct connection.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
It was missing in #12223, and the reply-schemas daily
was failing:
```
jsonschema.exceptions.ValidationError: 'nothing' is not valid under any of the given schemas
Failed validating 'oneOf' in schema[0]['properties']['loglevel']:
{'oneOf': [{'const': 'debug'},
{'const': 'verbose'},
{'const': 'notice'},
{'const': 'warning'},
{'const': 'unknown'}]}
On instance['loglevel']:
'nothing'
```
The light version only shows the table sizes, while the pre-existing
version that shows chain length stats is reachable with the `full` argument.
This should allow looking into rehashing state, even on huge dicts, on
which we're afraid to run the command for fear of causing a server freeze.
Also, fix a possible overflow in dictGetStats.
This pr can get two performance benefits:
1. Stop redundant initialization when most robj objects are created
2. LRU_CLOCK will no longer be called in io threads, so we can avoid the `atomicGet`
Another code optimization:
deleted the redundant judgment in dbSetValue, no matter in LFU or LRU, the lru field inold
robj is always the freshest (it is always updated in lookupkey), so we don't need to judge if in LFU
We add a new loglevel 'nothing' to disable logging in #12133.
This PR syncs that config change to sentinel. Because in #11214
we support modifying loglevel in runtime.
Although I think sentinel doesn't need this nothing config,
it's better to be consistent.
This commit excludes aux fields from the output of the `cluster nodes` and `cluster replicas` command.
We may decide to re-introduce them in some form or another in the future, but not in v7.2.
Users can record logs of different levels by setting the `loglevel`.
However, sometimes there are many logs even at the warning level,
which can affect the performance of Redis.
For example, when a user accesses the tls-port using a non-encrypted link,
Redis will log lots of "# Error accepting a client connection: ...".
We can provide the ability to disable logging so that users can temporarily turn
off logging and turn it back on after the problem is resolved.
previously the argv wasn't freed so would leak. not a common case, but should be handled.
Solution: move RUN_AS_USER setup and error exit to the right place.
this way, when we do `goto cleanup` (instead of return) it'll automatically do the right thing (including autoMemoryAdd)
Removed the user argument from moduleAllocTempClient (reverted to the state before 6e993a5)
Co-authored-by: Oran Agra <oran@redislabs.com>
Optimized HRANDFIELD and ZRANDMEMBER commands as in #8444,
CASE 3 under listpack encoding. Boost optimization to CASE 2.5.
CASE 2.5 listpack only. Sampling unique elements, in non-random order.
Listpack encoded hashes / zsets are meant to be relatively small, so
HRANDFIELD_SUB_STRATEGY_MUL / ZRANDMEMBER_SUB_STRATEGY_MUL
isn't necessary and we rather not make copies of the entries. Instead, we
emit them directly to the output buffer.
Simple benchmarks shows it provides some 400% improvement in HRANDFIELD
and ZRANGESTORE both in CASE 3.
Unrelated changes: remove useless setTypeRandomElements and fix a typo.
A single SPOP with command with count argument resulted in many SPOP
commands being propagated to the replica.
This is inefficient because the key name is repeated many times, and is also
being looked-up many times.
also it results in high QPS metrics on the replica.
To solve that, we flush batches of 1024 fields per SPOP command.
Co-authored-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
For zsets that will eventually be stored as the skiplist encoding (has a dict),
we can convert it to skiplist ahead of time. This change checks the number
of arguments in the ZADD command, and converts the data-structure
if the number of new entries exceeds the listpack-max-entries configuration.
This can cause us to over-allocate memory if there are duplicate entries in the
input, which is unexpected.
For ZRANGESTORE, we know the size of the zset, so we can expand
the dict in advance, to avoid the temporary dict from being rehashed
while it grows.
Simple benchmarks shows it provides some 4% improvement in ZADD and 20% in ZRANGESTORE
When `replicationFeedSlaves()` serializes a command, it repeatedly calls
`feedReplicationBuffer()` to feed it to the replication backlog piece by piece.
It is unnecessary to call `incrementalTrimReplicationBacklog()` for every small
amount of data added with `feedReplicationBuffer()` as the chance of the conditions
being met for trimming are very low and these frequent calls add up to a notable
performance cost. Instead, we will only attempt trimming when a new block is added
to the replication backlog.
Using redis-benchmark to saturate a local redis server indicated a performance
improvement of around 3-3.5% for 100 byte SET commands with this change.
Extend SENTINEL CONFIG SET and SENTINEL CONFIG GET to be
compatible with variadic CONFIG SET and CONFIG GET and allow multiple
parameters to be modified in a single call atomically.
Co-authored-by: Oran Agra <oran@redislabs.com>
The measured latency(duration) includes the list below, which can be shown by `INFO STATS`.
```
eventloop_cycles // ever increasing counter
eventloop_duration_sum // cumulative duration of eventloop in microseconds
eventloop_duration_cmd_sum // cumulative duration of executing commands in microseconds
instantaneous_eventloop_cycles_per_sec // average eventloop count per second in recent 1.6s
instantaneous_eventloop_duration_usec // average single eventloop duration in recent 1.6s
```
Also added some experimental metrics, which are shown only when `INFO DEBUG` is called.
This section isn't included in the default INFO, or even in `INFO ALL` and the fields in this section
can change in the future without considering backwards compatibility.
```
eventloop_duration_aof_sum // cumulative duration of writing AOF
eventloop_duration_cron_sum // cumulative duration cron jobs (serverCron, beforeSleep excluding IO and AOF)
eventloop_cmd_per_cycle_max // max number of commands executed in one eventloop
eventloop_duration_max // max duration of one eventloop
```
All of these are being reset by CONFIG RESETSTAT
When using scan in redis-cli, the SCAN COUNT is fixed, which means the
full scan can take a long time if there are a lot of keys, this will let users specify
a bigger COUNT option.
This pattern is from COMMAND INFO:
Returns information about one, multiple or all commands.
Also re-generate commands.def, the GEO change was missing in #12151.
