This commit ensures that vagrant attaches a new disk to the _next
available_ port, rather than the last one "used". This can occur if a
disk has been removed in a previous run, leaving a port open
Prior to this commit, Vagrant wouldn't validate the `type` option for
any synced_folder configs defined. This commit updates that behavior to
look at the current list of installed synced_folder plugins, and ensure
if a type is defined, it's a valid plugin in that list.
Output from recent Docker has changed:
Stderr: Error response from daemon: conflict: unable to delete 0ba49dd235e5 (cannot be forced) - image is being used by running container 250bbe980448
Fixes#7245
config
Prior to this commit, if a user had configured a provisioner that had a
config with a `name` option, it would not properly set the top level
provisioner classes name config option which would lead to some
understanibly confusing results when trying to `--provision-with`. This
commit fixes that by checking to see if the top level name isn't set,
look to see if that provisioners config defines a name, and use that
instead.
Since the root file system is marked as read-only, attempting to
link the shared directory to `/vagrant` will fail. If the guest
path is on the root file system and APFS is used, create the
link as a firmlink instead.
The Ansible package in FreeBSD is now `py36-ansible`.
If `pkg` itself needs updating, passing only one 'yes' is not enough to
confirm the installation of the package. Use the `-y` option,
specifically made for this purpose. Also add `-q` to force a quiet
output, inline with other guests.
References:
- [`pkg-install(8)`](https://www.freebsd.org/cgi/man.cgi?query=pkg-install&sektion=8)
- freebsd/freebsd-ports@cbf5576945
- By the way: Trim the generate 'pip install' command in Ansible::Cap::Guest::Pip::pip_install
- GH-11048: Fix same regression for FreeBSD and SuSE guests.
- GH-6633: Add RSpec examples to cover ansible_local 'cap' code.
Note: RedHat/Fedora guests are not covered yet by unit tests.
This commit catches the Errno::EPERM raised by the operating system if
the machine folder is inaccessible and displays it as a more friendly
error message.
This can be an issue on macOS Catalina if virtual machine files are kept
in a special directory (Documents/Downloads/Desktop) that Vagrant's
embedded Ruby is not allowed to access.
This ensures that rsync can be installed on an Alpine Linux machine where the
apk cache may not be current.
Display a warning if the vagrant-alpine plugin is installed, since Alpine guest
support has been merged into Vagrant core.
Prior to this commit, if a user had recently checked for updates, there
was no way to force Vagrant to re-check without manually deleting a
state file in the local `.vagrant` data dir. This commit fixes that by
giving users the ability to force check for updates for a given box with
a flag to the `vagrant box outdated` command.
This commit introduces a Darwin-specific template for NFS exports. This is almost identical to the standard BSD template except it puts each NFS export on its own line.
This resolves NFS issues discovered in macOS Catalina.
CentOS 8+ and Fedora 30+ no longer have the alias "nfs" for "nfs-server"
systemd service.
This shouldn't break backward compatibility, since "nfs-server" service
is available on all supported redhat systems that have systemctl binary.
Fixes#10838
Prior to this commit, docker would look for a container ID based on
"Successfully built" string. This output does not exist if a user has
enabled the experimental feature buildkit. This commit updates the build
behavior to match against both kinds of outputs, and instead of using
`scan`, it uses MatchData and groups the container id with match group
name `:id` instead of making hard assumptions with the matches being
contained inside arrays from scan.
At least on macOS combo Catalina + Docker engine 19.03.4 + Docker desktop 2.1.0.4 + vagrant 2.2.6 the original `matches = result.scan(/Successfully built (.+)$/i)` -line fails to generate a match. With this change I can `vagrant up --provider=docker` successfully.
StringBlockEditor already adds the necessary newlines. That extra
newline was making /etc/exports longer and longer, full of empty lines,
because StringBlockEditor doesn't know about it and does not remove it.
This commit fixes an issue where Gem::Version.new could recieve a nil
value if no addtional box updates are available. For some versions of
ruby, this is actually an error case. This commit fixes that by
converting it to an integer to prevent an exception.
Issue reference: https://github.com/rubygems/rubygems/issues/2359
This commit changes the behavior of `vagrant box outdated --global` so
it gets the latest version for the current machine's provider, rather
than the latest version for any provider.
Prior to this commit, if a user didn't supply a box file on disk or a
box url, Vagrant would crash and display a stacktrace with an invalid
file. This commit fixes that by adding some extra handling around the
arguments supplied to the publish command.
Check for modinfo in /sbin if it doesn't appear on the PATH.
If it's not found on the PATH or in /sbin, the command will default back to modinfo so the user sees the error message about adding it to their PATH.
This commit adds the machine guest name in the hostname validation error
message so that it's easier to see which guest in a Vagrantfile has the
validation error.
Sets `DEBIAN_FRONTEND=noninteractive` and tells `dpkg` to take the old
version of config files when installing Ansible, to prevent hangs
waiting for user input.
Fixes#10914
getent queries the system resolver for the hostname - but it's not
the resolver we're interested in. In fact, the hostname-to-be-set
may already exist in DNS (becuase DNS really is a nifty thing and
can do a lot of things which are not that possible with /etc/hosts
alone), in which case getent will "not fail" and vagrant will believe
the hostname had already been set.
Instead, query hostnamectl for the "static" hostname - that's the
one we will be setting, so we're ok IFF hostnamectl returns exactly
what we would be setting.
This commit fixes the original #11027 fix, which assumed that the
hyper-v provider just wasn't properly getting a VM id when it listed
snapshots. In reality, it was just that if you invoke the
`with_target_vm` method with no arguments, it runs on the entire environment.
This meant that the capability snapshot_list attempted to be invoked on
machines that didn't exist yet, which is the original cause for why the
list_snapshot method did not recieve a vm ID. This commit fixes that by
simply skipping the machine if it does not yet exist.
Prior to this commit, the docker action was using the method `prefix` on
an IPv4 and IPv6 address. This works fine for ruby versions 2.5 and
newer, however the ruby shipped with Vagrant is before 2.5, and
therefore the IPv4 and IPv6 classes do not have the prefix method,
resulting in an error. This commit fixes that by using a different
method of determining the prefix.
For bsd the resolve_host_path capability is a no-op. For darwin
hosts, if firmlinks are defined on the system, paths will be properly
resolved to real path.
Using the resolve_host_path capability allows hosts to modify the
shared folder directory while keeping the logic contained within
the specific host implementation.
On OS X 10.15, / is read-only and paths inside of /Users (and elsewhere)
are mounted via a "firmlink" (which is a new invention in APFS). These
must be resolved to their full path to be shareable via NFS.
/Users/johnsmith/mycode => /System/Volumes/Data/Users/johnsmith/mycode
We check to see if a path is mounted here with `df`, and prepend it.
Firmlinks are only createable by the OS and this wasn't supposed to be
visible to applications anyway:
https://developer.apple.com/videos/play/wwdc2019/710/?time=481
Prior to this commit, the docker compose build method would not properly
set build_args if given in a Vagrantfile. This commit fixes that by
using the passed in key `extra_args` from the docker build action.
If VirtualBox is installed but the kernel module is missing or the
service is stopped, the usability test should fail without crashing so
we can fall back to other providers.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Prior to this commit, if you ran Vagrant in a different current working
directory other than where a current guest machines location is, the
file provisioner would not take into account the machines local dir, and
would instead use the path where Vagrant was invoked to expand the
`source` path option for a file provisioner. This commit fixes that by
passing the root path `machine.env.cwd` when expanding the source dir.
Prior to this commit, the `pip_install_cmd` option for ansible guest
config was not properly finalized. This commit ensures that if that
value is still UNSET_VALUE, it gets set to empty string in the finalize!
method.
Prior to this commit, if you tried to save a snapshot without giving it
a name, the hyper-v driver would not properly obtain a vm id to save a
snapshot on, resulting in an error. This commit updates the command
snapshot save to hold onto the machines ID in argv rather than `pop` it
off, so that the hyperv driver can obtain the guests id when saving a
snapshot.
Prior to this commit, due to a fix that ignored `.vagrant` with rsync
helper, it broke the ability to watch for changes in subdirectories when
running the rsync-auto command. This commit puts back some of the helper
methods that were there previously for a given watcher path to ensure
that all files and subdirectories are properly watched and synced.
- nfs.service got recently removed in openSUSE Tumbleweed and calling service
restart nfs errors out on Tumbleweed. nfs.service has been an alias to
nfs-client.target for a very long time and can thus be safely substituted.
- all actively supported versions of openSUSE & SLE are using systemd now
=> no reason not to use systemctl
In commit 7980178d19 (#10879) I added a
`usable?` class method to `VagrantPlugins::DockerProvider::Provider`.
However, commit 34e53a5a4b (#10890)
incorrectly changed it to an instance method. This rendered it
ineffective because it’s called on the class, not an instance. Change
it back to a class method.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Prior to this commit, if there was a config error inside a provider
block, Vagrant wouldn't grab the right backtrace token on windows since
the api is different for ruby on Windows compared to all other
platforms. This commit ensures that the proper line number is chosen so
the error message is correct.
Prior to this commit, the docker login action assumed that if there was
a password to authenticate with, Vagrant was using a host vm to run
docker. This is likely due to some legacy decisions with how Vagrant
used to manage running docker. This commit fixes that by only grabbing a
host_vm lock if the host_vm is actually in use, otherwise login
normally.
Prior to this commit, `vagrant box prune --force` would not prompt a
user to prune Vagrant boxes, even if that box was in use. There was no
way to prune boxes, ignore the prompt, but keep in-use boxes. This
commit adds a new flag that can be combined with `--force`, that will
keep in-use boxes but prune older boxes without prompting the user.
The workaround for the broken repository should be safe to be removed,
since the last affected Alpine version (<=3.3) EOL'd in November of 2017.
The remaining important commands can be split out into seperate calls
of sudo(), which removes the need for manual exit-code checking
(since it aborts by itself when a command fails) and makes the code
easier to handle in general.
Prior to this commit, the chef_installed capability was looking for a
string that has recently changed in newer versions of chef. This commit
fixes that by instead just looking for the right version that was
configured for the chef client, rather than the specific string that
could change again in the future.
Prior to this commit, the BSD options for the /etc/exports file was not
properly set up in the correct order for a given entry. It was however
fixed for FreeBSD, but never for the original exports template. This
commit fixes that by unifying the BSD and FreeBSD templates.
Prior to this commit, the rsync helper expanded all exclude paths that
should be ignored to be full qualified and regexp escaped. However the
Listen gem expects these ignore paths to be relative to the path passed
into the listener, not a full path. This commit fixes that by using the
path given by the user for the `rsync__exclude` option
Prior to this commit, if a user specified that their `rsync__excludes`
option was an empty array, Vagrant would treat that as if it included
options inside the array rather than ignoring it. This commit fixes that
by only adding the excludes option when it exists and is not empty.
Prior to this commit, if a user ran a `vagrant box update` on their
entire environment and one of the boxes did not have a metadata file,
the rest of the boxes in the update would be skipped. This commit fixes
that by ignoring those boxes and showng a warning, so that the rest of
the boxes could check for updates.
Prior to this commit, Vagrant would list all machine snapshots in a flat
list, without showing which snapshots were associated with which guests.
This commit fixes that by placing some separation to make it clear which
snapshots belong to which guests.
Prior to this commit, the docker compose driver would _always_ path
expand a host volume no matter what. This is not always the correct
option, for example if that host volume is actually a reference to a key
inside a `volumes` hash instead of a path on disk. This commit changes
that by looking to see if the requested host volume is actually a
defined key inside the compose config, and if not, it will path expand
it like before. Otherwise it will leave the key "as is".
This prevents credential information from being persisted into the
local data directory which is used during subsequent runs to determine
folder definition changes.
Prior to this commit, if a snapshot restore was run on an entire
environment with some non-existent guests, Vagrant would attempt to list
their snapshots with a nil id. This commit fixes that by returning an
empty list of snapshots if the machine has not been created yet.
According to ifconfig(8), to list only Ethernet interfaces, excluding
all other interface types, including the loopback interface, the command
to use should be:
ifconfig -l ether
Related to: #8760
This is a follow-up of #10717 to use the same naming convention as on
Linux guests, in order to reduce the diffs.
Also adds the missing capability to `unmount_virtualbox_shared_folder`
on FreeBSD guests.
Use `mask` option for defining subnet on network configuration. Allow
options to be passed through using hash scoping and docker_network and
docker_connect prefixes. Enable public networks. Allow configuration
to define pre-existing networks by name.
Container inspection is caching data on first lookup. This will
result in incorrect data being returned on subsequent lookups if
a different `cid` value is provided. Also removed rescue of
the `Exception` class as this generally should never happen; rescue
of StandardError will be enough.
This commit updates the behavior of how the docker provider creates new
docker networks. It looks at each existing network to see if the
requested subnet has already been configured in the docker engine. If
so, Vagrant will use that network rather than creating a new one. This
includes networks not created by Vagrant. Vagrant will not clean up
these networks if created outside of Vagrant.
Since the virtualbox guest additions seem to only be available for
freeBSD, move the shared folder functionality over to freebsd guests
rather than all BSD guests.
This update was prompted by updates in openssh to the scp behavior
making source directory paths suffixed with `.` no longer valid
resulting in errors on upload. The upload implementation within
the ssh communicator has been updated to retain the existing
behavior.
Included in this update is modifications to the winrm communicator
so the upload functionality matches that of the ssh communicator
respecting the trailing `.` behavior on source paths. With the
communicators updated to properly handle the paths, the file
provisioner was also updated to simply apply previously defined
path update rules only.
Fixes#10675
Prior to this commit, the AddAuthentication hooks still existed in a
deprecated class LoginCommand. This commit fixes that by moving it over
to the vagrant cloud cli namespace instead.
Prior to this commit, the docker action would attempt to compare and
validate synced folders based on their string value, rather than their
actual path value. This commit updates that by path expanding the mounts
when comparing a containers synced folders.
This commit introduces some basic functionality for typed triggers:
- command
- action
Command triggers are triggers that will run before or after a given
sub-command.
Action triggers are for running triggers before or after internal
actions for Vagrant. This could be before or after a provision step,
before or after synced folders, or networking, etc.
On Windows the File::SEPARATOR ends up being `/` which causes
issues with the new way the path is being extracted from the
vbox information. When on Windows (even with WSL), automatically
convert the path to use common forward slash separator. This
fixes path modifications used for storing guest disks.
This fixes issues with box add/update when self hosting with client
certs. The --cert option was not being added to the curl subprocess
in these cases.
Prior to this commit, if a debian system requested an DHCP address using
systemd-network, Vagrant would ignore it and instead use the configured
IP from the virtualbox network action. This commit fixes that by instead
looking if DHCP was requested, and if so, use that option for an IP.
Prior to this commit, Vagrants output would only show that a file
provisioner was running, but had no detail as to what file was being
copied to where. This is especially confusing if a Vagrantfile has
multiple file provisioners. This commit updates that by showing the
source and destination of the file so that it's clearer what is being
copied and to where.
Adds a `reboot` option which allows the guest to be rebooted after
the completion of a shell provisioning task. The guest must support
the `:reboot` capability. Like the `reset` option, the `reboot`
option may be provided without defining `inline` or `file` options
when a reboot may be required between other provisioners.
Fixes#8639
Adds a new `rsync__rsync_ownership` option to rsync based synced folders
which will allow rsync to use the `--chown` flag if it is available. The
`rsync` and `rsync-auto` commands have a new `--rsync-chown` flag which
can be used to force the option on folders when running the commands.
Fixes#7329#7332
This PR adds support for running command passed via the --command
flag as elevated tasks. The option is only valid for commands and
not when setting up a remote session. Logic has also been adjusted
for when communicator restrictions are applied and test coverage
has been added.
Extra options are extracted from the machine configuration for the
network being configured to allow for customized network manager
behavior. The network entries must be filtered to remove non-network
entries (like port forwards) before accessing by index.
Fixes#9546
Rescue and re-wrap any errors encountered when running the post
rsync capability. Rescue this exception type and notify of error
when encountered by rsync auto. Include test coverage.
This commit adds a new rescue to the `publish` command for when the
client detects an invalid version prior to making the API request to
create that version.
Include config option within ssh_config command output template. Default
remote_user value to set username value. Include existence check on
provided config value to ensure file is available. Update tests to
include coverage on all changes. Add new options to the docs.
Also noticed whilst testing that if the `ProxyCommand` uses `%r`, then
it fails with `unable to find remote user`, so added support for
`config.ssh.remote_user` aswell
Both of these commands failed to default the options disabling
the provisioning from ignoring the sentinel file. This resulted
in different behavior than what was seen with the `up` and
`resume` commands which would only provision items with run set
to "always". This defaults the options to proper match the behavior
of `up` and `resume` to be consistent.
This also adds an extra `--no-start` flag to allow users to restore
a snapshot but not start the restored guest immediately.
Fixes#6752
When a large number of shares are defined it may cause the generated
command to exceed the maximum allowed length. To prevent this, only
allow 10 shares to be processed at a time.
Fixes#10483
Elevated commands can fail via winrm under certain conditions like
the machine name being changed. Detect this by checking for a known
exit code combined with known output included within stderr. If found,
attempt to re-execute the command using a machine prefixed username
if possible.
Prior to this commit, the package actions would create a temp dir in
the process of packaging and compressing a Vagrant box. This commit
ensures that the temp dir is removed once the command has completed so
that it doesn't leave around lots of temp directories.
Prior to this commit, if you specified a `version` for the salt provider
but no `install_type` Vagrant would fail to pass the proper parameters
to the bootstrap install script. This commit fixes that by adding some
validation to the salt provider if `version` is specified but not
`install_type`. It also adds some extra context for certain config
validation error messages so that the user knows what option was
incorrect, rather than the message just referring to the option as
*this*.
Prior to this commit, Vagrant would attempt to path expand a file that
didn't exist if it was left out of the passed in arguments and no
`--url` was used for external box uploading. This commit fixes that by
adding some additional validation for the passed in box file.
Prior to this commit, if you went to validate your Vagrantfile and
wanted to ignore the provider, Vagrant would still fail as it checks if
there are any registered providers that are installed and usable. This
commit mocks out all registered providers to bypass that for the
validate command so that Vagrant can just validate the config and ignore
any provider config blocks.
In some cases the E1000 NIC type is the only acceptable value. Since
defaulting causes breakages to existing boxes, leave the default value
as `nil` but check the VirtualBox version in use and print warning to
user if VirtualBox version is vulnerable and E1000 NIC types are
configured for use within defined network adapters.
The dry run import with VirtualBox 6 no longer provides full paths
for disks. Extract base path from suggested settings file location
and use that to generate full path name using provided disk base
name.
Be more restrictive when matching the port forward used for
SSH. Allow matching simply on the guest port, but also include
extra matching criteria for cases where multiple results may
be returned.
The default error action is to stop. When generating the initial
VM configuration during import, if the Compare-VM command fails
it results in a generic error message. Instead the error should
be ignored so the source VM can be inspected and a useful error
message can be returned to the user.
When running a shell provisioner elevated with winrm a scheduled
task is created to bypass permissions issues. If the name of the
computer has changed this may no longer work. To prevent errors
this PR updates the implementation to fetch the computer name
and prepends it to the username before creating the task.
This commit introduces a proper reboot cap for Windows guests. Once it
initiates a reboot on the guest, it calls out to the wait_for_reboot cap
to block on until the guest is finished rebooting.
Prior to this commit, if Windows was slow to reboot, Vagrant would fail
to find the right IP address to upload the wait_for_reboot script to.
This commit fixes this race condition by adding a timeout to ensure that
Vagrant can retry. It also properly catches an exception in the winrm
ready? method for checking if a guest is properly ready for
communications.
This commit adds a new flag to the `vagrant validate` command which
allows users to completely ignore the provider block of a config file.
This is useful for when you are running `vagrant validate` in CI and
don't want to install a valid provider to check the syntax of your
Vagratnfile. When the flag is invoked, a warning will be displayed
saying that the provider block will be ignored and not validated.
This commit is a workaround due to how older debian and ubuntu systems
fail to properly restart networking. Instead of relying on the init
scripts or ifup/down tools to restart each interface, this commit
instead restarts each interface individually
This commit adds some additional logic that falls back to using the
ifdown/ifup tools to restart networking. On Ubuntu 14.04, the init
script was designed to always fail to restart newtorking, so it needs
to use the ifdown/up tools instead. This commit will use the networking
init script as a last resort to restart networking, assuming other
commands haven't broken networking already.
https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/1301015
If the type of error changes on retry the messages will effectively
spam the user display with alternating messages. Log each message
sent and only re-display each message once within 10 seconds.
Prior to this commit, Vagrant would prompt for smb username and password
every time, even if only smb_username was defined. This commit changes
that by allowing a "default" username from the Vagrantfile, with the
option of overriding it.
Prior to this commit, the hostname was set with one big bash script and
attempted to determine what tools are available. This commit changes
that by splitting out that tool check on the Vagrant side of things with
the GuestInspection class, and adds back restarting networking to get a
DHCP lease with the change rather than using `dhclient`. This pattern
matches how hostnames are set in the redhat capability.
This commit introduces a new uploader class for uploading files and
splits up some commonly used functionality between it and the downloader
class into a curl helper library.
Prior to this commit, when creating the ControlPath tmp dir for
socket path, Vagrant would simply rely on `rand(1000)` for making unique
dirs for rsyncing files which could result in collisions. This commit
updates that be properly using `Dir.mktmpdir` with a `vagrant-rsync-`
prefix.
This commit introduces a new option to the core trigger feature: `ruby`.
It can be defined to run ruby code when the trigger is configured to
fire. If you give the ruby block an env and machine argument, the
defined ruby code can use those variables internally.
Dynamically generate RDP information when applicable via provider
if supported. When no RDP port is provided ignore RDP in config
and omit from output.
This commit adds a new option `abort`, which when configured, will exit
the Vagrant process completely. If set to `true`, it will exit cleanly
with exit code 0. Otherwise, the exit code can be configured.
Update capability to use guest inspection module for determining
correct actions to execute. When systemd is in use restart the
correct active service, either NetworkManager or networkd. Default
to using the original service restart when systemd service is not
found.
Prior to this commit, the puppet provisioner would not properly set its
environment variables, if any were configured in the Vagrantfile. This
commit separates those properly with semicolons when calling out to
puppet apply.
The AutomaticCheckpointsEnabled option may not always be available
depending on the version in use. Check for support before applying
the configured value. If automatic checkpoints are to be enabled
and support is not available, force an error.
Since we are no longer extracting information based on key value due
to localization issues, use start and end locations to extract data.
This prevents errors when extra information is included like Scope.
Prior to this commit, providers like docker would fail to be brought up
because they do not store box objects like virtualbox or vmware
provider guests. This commit fixes that by making sure the box object
exists before writing the metadata file to disk.
This commit introduces the `--force` flag to the reload command. This
change means that if the flag is included, the halt step of the reload
will forcefully shutdown the virtual machine rather than a graceful
halt.
When performing a box update and the box version has been updated
to be different than the installed version, perform a lookup for
the latest available installed box to allow the update command to
continue successfully
Only move new exports file to destination without sudo when the
file has write access and the directory has write access. Always
use sudo when changing file ownership.
When a guest is created, the box metadata information is stored in the
machine data directory. This allows modifications to happen to the
Vagrantfile definition of the box in use (box name change, box version
change, etc) while still allowing the Machine instance of an active
guest successfully load the box currently backing it.
This occurs with a Linux host when a link-local address is configured
for vboxnet0 (which is the default for VirtualBox 5.2.6).
`connect': Invalid argument - connect(2) for "fe80::ffff:ffff:ffff:ffff" port 80 (Errno::EINVAL)
Adds the `docker_consistency` option, which sets the Docker volume
consistency level. This can be used to greatly improved synced folder
performance, especially on macOS.
See for details: moby/moby#31047
Service status check was failing because it was not being run as root. This resulted in vagrant thinking the service was not running, hence it would always try to start nfs rather than updating exports.
Prior to this commit, the run trigger option wouldn't catch for failures
outside of the #Subprocess.execute raising exceptions. This commit fixes
that by inspecting the exit code result of the subprocess and using the
new `exit_codes` option to determine how to move forward with the
trigger.
After installing msys2, there is another `cmd` on the path which prevents shared folders from being mounted. Explicitly calling `cmd.exe` fixes the issue
When the configured directory for FTP push has too many files, it will
generate an exception and fail due to a stack overflow. When this happens
just rescue out the exception and re-raise a custom error to provide
some context to the user on the actual problem.
Adds the final line of output to tests and properly simulates
failure. Fix with type casting to prevent calling methods on
nil and drop the final entry as it's not valid.
Fixes#9806
The base chef provisioner class will set the node name automatically
if not provided in the configuration. Since the chef apply provisioner
does not provide a node_name option, setting it will invalidate the
configuration. This checks for the node name before attempting to
use it.
Fixes#9901
- Fix#9796: Failing installation on bionic (18.04 LTS)
- Remove support for precise (12.04 LTS), which is out of public support
(On this version, the package python-software-properties contained
the add-apt-repository tool)
- Reduce the number of SSH calls, and avoid unnecessary apt-get calls.
Prior to this commit, when setting up private networks on Ubuntu using
netplan, it assumed that the guest was using systemd, the suggested
default tool to manage networking, and did not take into account devices
that could be managed with NetworkManager. This commit fixes that by
looking at the devices managed on the guest to see if its managed by
NetworkManager, and if so, use that renderer for netplan instead of
networkd.
This commit uses the internal helper SafeExec rather than using the
Kernel class directly. It also adds a test to ensure that if the `-t`
option is used, it will call SafeExec.
Keep track of selected Hyper-V switch using the ID instead of name
to prevent any encoding issues that may occur switching between
PowerShell and Ruby. With the IDs staying consistent, the switch
name can be fetched from the provided ID.
Fixes#9679#8794#9451
To allow users to continue to use the community plugin, this commit adds
a switch that will not load the core trigger feature if it detects the
community plugin is installed. It also allows the user to disable the
warning so they can continue to use the plugin without extra output.
If the guest address is unavailable via Hyper-V inspection, extract
MAC address of network adapters and check neighbor information for
any currently matching known address.
Due to the behavior of URI.parse on Ruby < 2.5 returning the string
value of the parsed URI object may modify the original URL. Specifically
it will remove the `//` prefix characters from SMB paths. When no
host modifications are being made, always return the original value.
Fixes#9636
This commit sets the structured_facts option to nil if its still
UNSET_VALUE at the finalize step. This was causing a bug when the facter
config was set but was not using structured facts.
This updates the permissions on the automatically generated private
key file to only be readable by the user. Includes support for file
permission modification on Windows platform.
This uses shellwords to split the command in the command filter
inside the winrm communicator. Using shellwords properly handles
things like quoted paths. Path arguments are also quoted to
prevent issues with paths that include spaces.
Fixes#9390
The pull request #6561 added the support for arrays for data_bags_path
in chef-solo and chef-zero, but missed a `.first` in chef-zero (which
only keeps the first data bag path). The documentation and the template
for chef-zero are already good (since #6561).
Fixes#9668.
Prior to this commit, the incorrect path was used when determining where
to export an ovf file during the `vagrant package` step. This commit
updates that by checking if vagrant is within WSL, and if so, convert
the path to a proper windows path to be used during the export.
Fixes#9059
Prior to this commit, the hyper-v and virtualbox system crash check
existed within the initialize function of the virtualbox provider. That
caused an issue when running with other providers, because the
virtualbox provider still gets initialized even if not used. This commit
changes that by placing the check inside of one of the virtualbox
provider actions that checks if virtualbox is installed and ready to
use. This action is action is used by the main vbox provider actions,
and should not be called when other providers are being used with
Vagrant.
Always remap old hosts to target host when encountered. When custom
vagrant server is defined, warn when tokens may be attached and allow
time for user to cancel.
Fixes#9442
This commit adds a function on windows for the VirtualBox provider to
check if Hyper-V is enabled. If so, exit and display a warning to the
user that going forward will result in a system crash.
This makes it silent (no progress information), which would otherwise
result in output like the following (when the output from the bootstrap
script is displayed in verbose mode):
% Total % Recei
ved % Xferd Avera
ge Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0
0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 244k 100
244k 0 0
458k 0 --:--:-- --:--:-- --:--:-- 458k
* INFO: Running version: 2017.12.13
…
`uname -sr` return also 5.11 on OmniOS, SmartOS which is not the same as Oracle Solaris 11.x. SmartOS and OmniOS are inherit from Solaris and not from Solaris 11. For that reason we need a more explicit check that a solaris11 guest is a real Solaris version 11, for that reason the /etc/release file is checked.
Display warning to user about the VirtualBox SharedFoldersEnableSymlinksCreate
option with link to VirtualBox documentation and instructions on how the
setting can be disabled.
Prior to this commit, the virtualbox synced folder option
`SharedFoldersEnableSymlinksCreate` was always enabled. This commit
introduces a config option and an environment variable which allows
users to configure the option globally or per synced_folder in their
Vagrantfile.
Prior to this commit, when the `--global` flag was used with the
`vagrant box outdated` command, it would ignore box providers and not
inform the user of all outdated boxes. This commit fixes that by
displaying each box within the users environment, and includes the
provider of the box in the message.
As of `net-ssh` version 4.2.0, the key :paranoid has been deprecated in
favor of using :verify_host_key. This commit updates Vagrants ssh config
to use the new key, and deprecates the use of :paranoid.
+ This disambuguates calls to the Hyper-V functions for the Hyper-V provider.
The ambiguity of some commands - such as `Get-VM` - causes the Hyper-V provider
to fail on systems where VMware PowerCLI is installed. This change ensures that
all calls to Hyper-V specific cmdlets or functions are prepended by `Hyper-V\`.
This ensures the correct cmdlet calls are being made.
+ Resolves #8862.
Provides simple nfs service name detection via systemd or sys-v. Defaults
are provided if no match is found. Service name is defined via method
allowing derivative guests to only need to provide an updated name.
This fixes an issue when the interface being configured is the
interface through which ssh traffic is forwarded.
In a complex scenario, one needs to disable the default interface for
NAT, and use other interface for ssh. In this case, when vagrant run
`ifconfig #{ifname} inet delete`, the second ifconfig that is supposed
to restore interface settings will never be called. This might be a rare
need, but it is also strongly recommended to use `netstart` when
reconfiguring interfaces after updating `hostname.if(5)`.
The issue can be triggered when ssh connection has issues between two
`ifconfig` commands.
This bug (invalid method call) hasn't been caught by unit tests because
Vagrant::Plugin::V2::Config catches all invalid/bad configuration calls
and save them for generating error messages during the "validate" stage.
This way, the `ask_sudo_pass=(value)` method was not interrupted and the
`@ask_become_pass` attribute was (surprisingly) correctly set (allowing
the related unit tests to pass).
In order to avoid similar problem to happen again, the deprecation
message output is now fully verified.
This commit ensures that we actually break when the download was
successful. Before it tried to download again for every iteration of the
loop. In addition the number of iterations have been increased. I've
experienced timeouts on third retry. Increasing to 5.
This commit adds better messaging to the user if the parallel flag is
used without the force flag. It also makes the state checking based on
the delta between the initial and final states of the guests due to the
fact that there is no guarantee what the "destroyed" state id will be
between providers.
On Debian installations, wget is installed even into the most minimal
environment. Even Python support on Debian cannot be guaranteed if
Standard System Utilities was not selected at installation time (or if
debootstrap was used), which is why the retrieved bootstrap-salt.sh
script takes care of installing it prior to installing Salt.
This commit requires the winssh communicator class wihtin the public_key
capability for Windows. Prior to this commit users could run into a
situation where Vagrant would check if the machine could speak in WinSSH
and fail on an uninitialized constant.
This commit removes some duplicated code within the Solaris11 guest
implemnentation and instead relies on the Solaris guest for the majority
of its guest capabilities.
It should be valid to allow paths with spaces for the synced folder
guest path but since the guest path is used to generate the ID (if one
isn't provided), this will err out in VirtualBox because it doesn't
allow spaces for the --name argument. We should simply convert ' ' to
'_' as we do with other special characters.
Fixes#8991.
1. When remote executing scripts one should always call powershell with
1a. "-NonInteractive", in order to prevent interactive prompts from leading to an endless waiting time for the script to return
1b. "-NoProfile", in order to prevent the loading of unknown custom profiles before execution of the script which could have unintended side effects
2. During my tests I constantly ran into 408 timeouts when downloading the salt binaries. I've prevented that by adding a simple retry mechanism and an error exit in case of multiple failures. Without this change the bootstrap script never returned (and neither did vagrant up)
Output format of ui.info method (bold text) makes reading long script outputs really heavy on the eyes. ui.detail is a better match for this type of output.
Reverting the changes done in 7d2f7dab97
because they don't work and or update vagrant to invoke running the
vbox cli tool for every single forwarded port instead of forwarding them
all in one command.
Issue: https://github.com/mitchellh/vagrant/issues/8468
A lot of vboxmanage commands are flakey and frequently cause
bringing multiple machines up at once to fail, especially when
the host system is under heavy load. Most commands are also safe
to retry and just result in a no-op, so we can simply add
'retryable' to a lot of existing calls. For the others we need to
do a little bit of cleanup or reevaluate the parameters before
trying again.
- Keep the Programming Errors with corresponding Exception class and
en.yml message template. Fix the alphabetical order in errors.rb by
the way.
- Fix English wording in the documentation and en.yml messages
- Use StandardError for unknown error rescuing.
Thanks @chrisroberts!
Vagrant will verify that the current Ansible version does support the
requested compatibility mode (only applicable if not "auto", of course).
As mentioned in the documentation, there is no sanity checks between
`version` option and `compatibility_mode` option.
With this change, the host-based provisioner is also improved to
execute only once the "ansible" command (and store the gathered
information for multiple usages like version requirement and
compatibility checks). On the other hand, the guest-based provisioner
can still potentially execute "ansible" twice (once in the
AnsibleInstalled cap, and via "gather_ansible_version" function via
Base::set_compatibility_mode).
Before this change, only the ansible_local provisioner supported this
option (for ansible version requirement, and pip installation). Now, the
ansible host-based provisioner can also require a exact ansible version.
Resolve#8914
Note: this has been added as part of #6570 resolution, since the
introduction of the `compatibility_mode` auto-detection made both
provisioners made capable to detect ansible version.
Pending: optimize the code to avoid duplicated executions of "ansible
--version" command.
With this change, it is now possible to get rid of many deprecation
messages successively introduced in Ansible 1.9, and 2.0. More
interesting, the generated inventory will contain the recommended
variable names (e.g. `ansible_host` instead of `ansible_ssh_host`)
when the compatibility mode is set to '2.0'.
Details:
- Add `compatibility_mode` option to control the Ansible parameters
format to be used. The value corresponds to the minimal version
supported. For the moment, possible values are '1.8' (corresponding to
Vagrant's former behaviour) or '2.0'.
Note that a dynamic inventory generated in compatibility mode '2.0'
is not supported by Ansible 1.x. On the other hand, Ansible 2.x so far
supports inventory format generated by the compatibility mode '1.8'.
- Add compatibility mode auto-detection, based on the available Ansible
version. This is the default behaviour in order to bring a maximum of
user friendliness. The drawback of this approach is to let potential
compatibility breaking risks, for `ansible` provisioner setups that
already integrate Ansible 2.x **AND** rely on the existence of
the generated `_ssh` variable names. Thanks to the vagrant warnings
(and its release notes), I argue that it is worth to offer
auto-detection by default, which offers a sweet transition to most
users.
- Add `become`, `become_user` and `ask_become_pass` options and their
backwards compatible aliases. The legacy options are now deprecated.
Note that we intentionally didn't provide a '1.9' compatibility mode,
as it would add extra-complexity for practically no added-value.
To my knowledge, the Ansible 2.x series haven't introduced yet any major
changes or deprecations that would motivate to introduce a higher
version compatibility mode (to be confirmed/verified).
Resolve GH-6570
Still Pending:
- Optimization: Reduce the number of `ansible` command executions.
Currently two exec calls will be performed when the compatibility
mode auto-detection is enabled (i.e. by default). We could make the
provisioner a little bit smarter to only execute `ansible` only once
in any situation (by combining "presence" and "version" checks).
- User-friendliness: Add better validator on `compatibility_mode`
option, and shows a warning or an error instead of the silent
fallback on the auto-detection modus.
- Test coverage: All the added behaviours are not fully covered yet.
Prior to this commit, if you set up multiple folders to export with NFS
on linux with the exact same hostpath, the template used to write
/etc/exports would end up placing the same path with the same IP in
/etc/exports and cause an error preventing the folders from being
properly mounted. This commit fixes that by first looking at which
folders are being exported and if there are any duplicates. If so,
remove the duplicates and only export 1 hostpath folder. If these
duplicate folders have differing nfs linux options, an exception must be
thrown because we cannot assume which options the user intended to
export with.
The patterns "all" is a special keyword that target all hosts in the
inventory. Therefore it makes sense to accept "all:vars" as a group
variable name. Note that "*:vars" pattern is not valid in an Ansible
inventory.
See http://docs.ansible.com/ansible/latest/intro_patterns.html#patternsFix#7730
This commit aligns how the file provisioner should work on all host
machines. It ensures that a `/.` is only applied if the user intended
to upload a folder to a destination under a different name. It ensures
that if uploading to a windows guest with a different destination folder
name, it does not nest the source folder under that name so that it
works the same as it does on linux platforms. It also updates the
behavior of the winrm upload communicator by allowing an array of paths
to be uploaded instead of a single file or folder to allow for this new
functionality for windows guests.
This commit introduces the salt_arg option that allows a user to pass
additional command line flags to the `salt` tool when provisioning with
a master setup.
It also adds additional config validation to ensure that both
`salt_args` and `salt_call_args` is an array.
Prior to this commit, if the ssh-config command was invoked within
cygwin or msys2, it would show a regular windows style path for private
keys rather than a path that could be used within msys2 or cygwin. This
commit updates that behavior by converting all of the private key paths
to the proper msys2 or cygwin path if the platform is windows and the
command was invoked from one of those two shells.
Prior to this commit, when the guest capability attempted to expand a
path with spaces it would quote the path passed in. However if the path
also had a relative path those quotes would end up making `printf`
ignore it and not properly expand the path fully. This commit updates
that to first escape the quotes of a path and then pass in the new path
to be expanded.
Prior to this commit, when using a global id to bring up a vagrant vm,
vagrant would fail during the "install provider" step due to the fact
that the global vagrant machine was not configured for the local vagrant
environment. Since this global vm exists elsewhere, we disable the
install provider step so that vagrant can just bring up the global
vagrant machine.
Prior to this commit, there was no way to add additional ssh arguments
within a Vagrantfile for a given vagrant machine. This commit introduces
a new option extra_args that allows users to pass in a single argument
or an array of flags that will be added onto the ssh command.
Prior to this commit, the `vagrant validate` command would only validate
the first machine in a vagrant file. This commit improves that by
validating all known machines in the environment. If one is not found,
it will properly throw an exception instead of a stacktrace.
Prior to this commit, if a user passed in a script that was frozen,
the shell provisioner would fail to modify the script to replace line
endings for windows because the string was immutable. This commit fixes
that by dup'ing the string so that it can have its line endings replaced
Prior to this commit, if a user set the `destination` path to include a
space, the `shell_expand_guest_path` function would remove that space
and return a partial path. This commit updates that to quote the path to
be expanded to preserve the entire path.
Prior to this commit, if a file provisioner block was ran twice with a
folder on a remote host, due to how scp works, it would first copy over
that folder, and then on the second action it would copy an identical
folder nested within the first one. While this is 'intended' behavior
with scp, it is unexpected behavior for the file provisioner. This
commit updates the file provisioner to first ensure that the directory
to be copied exists on the remote host prior to copying, and then the
destination dir has been changed to the directory that the destination
will be copied to, rather than the exact directly that includes the
folder from the host to prevent the nested folder behavior.
This adds a prompt for a token description, which is now supported in
Vagrant Cloud. Pressing enter on the prompt uses the default description
of `"Vagrant login"`.
$ vagrant login
In a moment we will ask for your username and password to HashiCorp's
Vagrant Cloud. After authenticating, we will store an access token locally on
disk. Your login details will be transmitted over a secure connection, and
are never stored on disk locally.
If you do not have an Vagrant Cloud account, sign up at
https://www.vagrantcloud.com
Vagrant Cloud Username: justincampbell
Password (will be hidden):
Token description (Defaults to "Vagrant login"):
You are now logged in.
$
Which created a token with the default description of "Vagrant login":
Entering a description:
Token description (Defaults to "Vagrant login"): Justin's MacBook Pro
Prior to this commit, if a state was reached where the action_box_add
command needed a force flag, it would fail requesting the user to
provide that flag to override adding a new box. However that flag did
not exist on the box update command, and could not be passed onto the
action_box_add action. This commit updates that to include a force flag,
and if used, pass that value onto the action_box_add action.
Prior to this commit, because of how the bootstrap salt shell file
worked, if github could not be resolved, the installer script would fail
silently with an exit code 0 because `sh` would evalute without any
errors and the curl exit code would be ignored. This commit splits out
the installer to first attempt to save the bash installer, and if it
exists, execute it.
Powershell helper script now returns error when guest IP address
cannot be discovered. When reading addresses from a network
device both IPv4 and IPv6 are stored and the IPv4 address has
precedence on returned address.
When preparing the NFS settings on VirtualBox the guest IP addresses
are pulled from VirtualBox directly and any static addresses are
pulled as well. This can lead to aquiring a host IP and machine IP
but results in a failure of NFS mount because the IPs are not on
the same network. This filters the machine IP result to validate
it is within the host adapter IP range.
Prior to this commit, the puppet provisioner would use the manifest dir
flag when running `puppet apply`. Not only is this flag redundant due to
how puppet apply works, but it is also deprecated in Puppet 4 and
removed in Puppet 5. This commit simply removes the flag when invoking
`puppet apply`.
Prior to this commit, rsync-auto would not properly rsync realtive dirs
outside the cwd if defined in the Vagrantfile. This commit updates that
to ensure that the command looks at the Vagrant config to ensure that
folder was intended to be rsync'd to the machine even if outside the
current working dir.
Prior to this commit, when users invoked the `rsync-auto` command using
the docker provider with boot2docker, vagrant would rsync all known
containers using the boot2docker vm rather than the current working dir.
This commit updates that behavior to ensure that only the current
working dirs vagrant machines will be rsynced.
* ALT Linux platforms is an original rpm based distribution
forked as Mandrake Russian Edition Spring at 2001 year
* Distributions of ALT Linux use etcnet (https://www.altlinux.org/Etcnet) as
internal network configuration system needs for configure_networks support
Prior to this commit, if a user attempted to configure
`/etc/default/docker` through vagrant prior to installation, the package
manager would not override an existing configuration and installing
docker would then fail. This commit fixes this by introducing a
`post_install_provisioner` that allows users to define a provisioner
block that will run after docker has been installed, allowing users to
configure `/etc/default/docker` how they want.
This commit adds a variety of fixes for SmartOS guest support:
- Host name setting now works in the global zone and in non-global zones
- NFS now works in the global zone and the non-global zone.
- Tests are updated and moved to the (apparently) more modern style
This commit allows the user to configure two additional options that
were previously not configurable: Compression and DSAAuthentication.
Each config option is set as a boolean, and if left out of the config
will default to its previous behavior which is included and set to
"yes". If the user explicitly sets it to false, it will not be included
as an ssh option.
While neither the FreeBSD provisioner nor the SUSE provisioner support
installing Ansible using pip their ansible_install methods still get
called with that fourth argument. The result being these errors when
Vagrant tries to install Ansible.
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/freebsd/ansible_install.rb:10:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/suse/ansible_install.rb:9:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
The Arch provider, it too without pip support, already catches the
pip_args argument this way.
Prior to this commit, Vagrant had no way internally to determine if a
provisioner object was unique if the `name` property was not set.
Because of this, when vagrant went to merge configs it would duplicate
an existing unnamed provisioner since it had no way of determining if a
user actually had added the same provisioner twice. This commit fixes
that by introducing an id which will default to `name` if its set, but
if not will be set by `SecureRandom.uuid`.
Prior to this commit, the ssh communicator would use the default cipher
list in Net::SSH to negociate which ciphers it should use between hosts.
Due to a bug in Net::SSH and the position of the `none` cipher in its
default cipher list, if a host supported the none cipher, but also
only supported other ciphers that came after none in the default list,
it would accept none and attempt to use that cipher instead of the other
supported ciphers. This commit fixes that behavior by copying the
default cipher list from Net::SSH and placing none last in the list so
that other ciphers can be used in the negotiation before attempting to
use the unsecure none cipher.
This commit adds some better handling around the snapshot restore and
delete commands for the virtualbox provider. If a user attempts to restore from
a vm that does not exist, instead of exiting 0 it will raise an
exception saying the virtual machine has not been created yet.
Addtionally, if a user attempts to restore from a snapshot id that does
not exist, instead of printing a complicated exception from the
virtualbox cli tool, it prints a more useful error message telling the
user that the snapshot does not exist.
Prior to this commit, if a user ran the `vagrant ssh -c CMD` command, it
would not allow the user to configure pseudo-terminal allocation. This
commit introduces a -t flag for the `vagrant ssh` command which defaults
to true if not specified.
This commit adds/changes the following for SmartOS guests:
- modifies the "Halt" capability to use /usr/sbin/poweroff in preference
to /usr/sbin/shutdown with parameters, and modifies the associated
test.
- adds an "InsertPublicKey" capability and tests.
- adds a "RemovePublicKey" capability and tests.
With this commit applied, the vast majority of typical Vagrant workflow
is available to SmartOS global zone guests (provided NFS mounts are used
rather than VMWare shared folders).
Prior to this commit, if a user attempted to use the `vagrant snapshot
save` or `vagrant snapshot list` commands on a vm whose provider did not
support snapshots, it would simply print a warning. This commit changes
that behavior by instead raising an error.
Prior to this commit, the vagrant snapshot plugin would save snapshots
with existing names which lead to duplicate snapshot names being saved.
This commit fixes that by checking to see if the given snapshot name
already exists and if so, fails telling the user the given snapshot name
already exists. If a user passes a --force flag, vagrant will first
delete the existing snapshot, and take a new one with the given name.
Before the patch this error will happen if the original directory already exists
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
The following SSH command responded with a non-zero exit status.
Vagrant assumes that this means the command failed!
mkdir '/cygdrive/c/inetpub/wwwroot'
Stdout from the command:
Stderr from the command:
mkdir: cannot create directory ‘/cygdrive/c/inetpub/wwwroot’: File exists
-------------------------------------------------------------------------------------------------
After the patch, this is result
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
==> windows: rsync[stdout] -> sending incremental file list
==> windows: rsync[stdout] ->
==> windows: rsync[stdout] -> sent 500855 bytes received 6635 bytes 78075.38 bytes/sec
==> windows: rsync[stdout] -> total size is 175357552 speedup is 345.54
-------------------------------------------------------------------------------------------------
Enables proper setup of VMs started from within WSL rootfs paths. Updates
setup for Windows access when working within the WSL to auto-detect settings
instead of relying on user defined environment variables.
This makes the behavior of the docker and hyperv provider consistent with the
virtualbox provider by raising an error on ssh actions if the machine is not
created or not running.
Fixes#8508
Reduce the total number of commands run to configure interfaces. If
a service reload/restart is required, only execute it once instead
of once per device. When nm is managing a device, the explicit up
is not required.
Properly detects NetworkManager on guest as well as devices controlled
by NetworkManager. Provides configuration option to enable/disbale
NetworkManager control on devices.
Fix the error
```homestead-7: Creating and registering the VM...
An error occurred while executing a PowerShell script. This error
is shown below. Please read the error message and see if this is
a configuration error with your system. If it is not, then please
report a bug.
Script: import_vm_vmcx.ps1
Error:
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:18 char:37
+ [string]$differencing_disk=$null
+ ~
Missing ')' in function parameter list.
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:20 char:1
+ )
+ ~
Unexpected token ')' in expression or statement.
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : MissingEndParenthesisInFunctionParameterList
```
In some cases the SSH connection may be aborted while waiting
for setup. This includes aborted connections in the list of
applicable exceptions to retry on while waiting for the connection
to become available.
Fixes#8520
Prevent sending empty data strings to defined blocks handling
stderr and stdout output. These can occur when the garbage
marker is identified and collected data pruned, but no remaining
data is left to send.
Fixes#8259
With the introduction of `pip_args` option, you can easily extend the
`:pip` installation mode behaviour. But some interesting/advanced usages
are still not possible because of the auto-generated parts ("ansible"
package, version selection, and the `--upgrade` flag).
By adding this "pip_args_only" install mode, it will be for instance
possible to:
- install unofficial releases, like release candidates published at
https://releases.ansible.com/
- install more pip packages (e.g. via a `requirements.txt` file), with
hash validation, etc.
Note that there is no config validation that requires `pip_args` option
to be defined when the :pip_args_only mode is selected. This would be
more elegant, and user friendly to raise a configuration error, but this
can wait. At least, running with an empty `pip_args` won't lead to any
command crash, since the rather dummy "pip install" shows an helper
notice and terminates with a zero (0) exit code.
This change is thought as a complement to the changes originally
proposed in pull request GH-8170.
With this new option, it is now possible to pass additional arguments to
pip command when the `install_mode` is "pip".
(@gildegoma reworded the original commit message of pull request GH-8170)
Issue #8159
while using:
$ vagrant package --base ${VIRTUALBOXNAME}
this error occurs:
/usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:59:in `package_base': uninitialized constant VagrantPlugins::CommandPackage::Command::SecureRandom (NameError)
Did you mean? SecureRandom
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/cli.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/environment.rb:274:in `cli'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/bin/vagrant:118:in `<top (required)>'
from /usr/bin/vagrant:22:in `load'
from /usr/bin/vagrant:22:in `<main>'
`/etc/init.d/network restart` already restart NM and shutdown interfaces.
In start() :
```
if [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]; then
nmcli connection reload
fi
```
In stop() :
```
for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do
unset DEVICE TYPE
(. ./ifcfg-$i
if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
if ! check_device_down $DEVICE; then
action $"Shutting down interface $i: " ./ifdown $i boot
[ $? -ne 0 ] && rc=1
fi
)
done
```
Where $remaining include all "others" interfaces including eth*
This reverts commit 166d10d4e1.
RHEL-7 / Current Fedora versions tend to use NetworkManager for
configuring the networks, and `service network restart` might fail.
If the `NetworkManager` service is running, we should restart it,
otherwise we try restarting `network`.
Allows checksum validation on downloaded files via Util::Downloader
using MD5 and/or SHA1 checksums. This also integrates checksum validation
support with the shell provisioner for downloaded remote files.
Usage: vagrant box prune [options]
Options:
-p, --provider PROVIDER The specific provider type for the boxes to destroy.
-n, --dry-run Only print the boxes that would be removed.
--name NAME The specific box name to check for outdated versions.
-f, --force Destroy without confirmation even when box is in use.
-h, --help Print this help
If a `name` is specified as an option, it will be used as the id instead
of inferring it from the `guestpath`. If `guestpath` is nil, the `name`
needs to be specified so the folder can be mounted with a name.
This also fixes the synced folder code to allow `guestpath` to be nil.
It was allowed in a previous version for the purpose of preventing a
directory from being auto mounted (#936), but seems to have become an
error at some point after that.
An example of modifying the default /vagrant folder so it doesn't
auto-mount anymore:
config.vm.synced_folder ".", nil, name: "/vagrant"
An example of sharing another folder, but not auto-mounting it:
config.vm.synced_folder ".", nil, name: "foobar"
Fixes#6835.
The `pkg_add` command will return `0` when a package requested for
installation is not found. This adds a validation check to ensure
the rsync package is actually installed on the guest.
When configuring network devices force NetworkManager to reload new
configuration files as they appear. This prevents NetworkManager from
attempting to continue managing devices on initial start up.
With this new option defined, the `ansible-galaxy` and
`ansible-playbook` commands generated by the Ansible provisioners will
be executed with the ANSIBLE_CONFIG environment variable set
accordingly.
Resolve GH-7195
This commit also fix the following open issues:
- Implement the pending RSpec examples about path existence checks
performed by the ansible (remote) provisioner.
- In verbose mode, the ansible remote provisioner now correctly displays
the Ansible Galaxy parameters ("role_file" and "roles_path") with
single quotes (which is safer for potential copy-paste usage).
Additional Notes:
- Test coverage for `ansible_local` provisioner is still not
implemented. See GH-6633.
- Test coverage for galaxy from host is not implemented yet (due to
general issue with mocking both command executions, see
https://github.com/mitchellh/vagrant/pull/6529#r45278451
It was failing to create files below the machines\default\hyperv folder, rather it was creating folders named 'hypervSnapshots', 'hypervVirtual Hard Disks', and 'hypervVirtual Machines'. This was causing the files to not be removed when destroying the vm, and an error when subsequently bringing it up again.
/etc/issue is far from being a reliable source for OS detection as it
can be changed by a user without affecting any OS functionality. As
newer Debian systems run systemd by default, check for /etc/os-release
and fallback to lsb_release for older Debian versions. Check #7625 for
a similar issue. Even lsb_release is not manatory, therefore keep the
current code of parsing /etc/issue to avoid regressions.
- Remove `ansible-galaxy` detection, since this command was introduced
in Ansible 1.4.2 (December 2013). Checking for `ansible-playbook`
presence should therefore be enough for any "modern" Ansible setup.
- Look for the command defined by the new `playbook_command` option.
Related to GH-7881 and GH-7536
Note that error messages were not adapted, and only mention
a generic "Ansible Software" when executed commands are failing.
We assume that people using the `playbook_command` option are
advanced users that will know all the components to be considered.
Add failing networking interface list sorting test with example
provided by #7883. Update sorting logic to properly handle different
types and differing array lengths.
Fixes#7883
The ansible-playbook command is currently hardcoded for the ansible and
ansible_local provisioners. This patch adds the config option
playbook_command to allow the user to change the command.
Implemented the differencing disk for vmcx.
This means the disk is now copied by Hyper-V (Powershell) instead of Ruby for new machines.
This does mean EFI Firmware now does work for machines since it is quite a feep copy. Compare-VM will report incompatibilities should they be found.
Changes introduced in #7207 removed the logic to handle the
`minion_id` configuration. This commit addresses that regression
by including the `--id #{@config.minion_id}` flag everywhere that
`--local` is used (as it had done before).
I'm not totally in love with the `get_masterless` abstraction here,
so if someone has a better suggestion I'll happily change it.
Fixes#7454
- Honour `ssh.proxy_command` setting (even when the Docker provider is
used via a proxy host). Silly configurations may lead to silly
behaviors, but let's apply the settings...
- Remove condition on `provider_config.connect_via_ssh`, which is
a provider specific parameter (from vagrant-libvirt provider).
- Add a simple unit test
Changes introduced in 982af05 caused the RDP configuration file to be written
with all settings on one line instead of one setting per line. The Microsoft
Remote Desktop client for OS X rejects these configuration files as being
malformed. This patch restores the configuration to one line per setting and
adds tests to guard against regression.
Fixes#7629.
nfs-server.service seems to load kernel modules it needs itself, while nfsd appears in `/proc/filesystems` only after the kernel module has been loaded, so vagrant fails to detect NFS server until it's started first time after the system has booted. This checks if the NFS service actually exists and hopes that it'll figure the stuff out itself.
`list-unit-files` is utilized rather than `list-units` because systemd seems to not list units that are disabled: https://lists.fedoraproject.org/pipermail/devel/2011-November/159117.html
BSD-based guests do not support VirtualBox shared folders. This is a
common source of confusion in Vagrant. This new error clearly explains
that this is not a bug in Vagrant and provides instructions on how to
disable them.
lsb_release command is included in lsb-release package. Sometimes this is
not installed; ex: Docker official Ubuntu image.
/etc/os-release is included in base-files package,
so this is more reliable than lsb_release.
Use the version of Hyper-V instead of Powershell to determine which
exception is thrown by Get-VM. Also fixing an invalid catch statement,
since Powershell can not use variables to match thrown exceptions in
catch.
This adds a new environmental variable `VAGRANT_BOX_UPDATE_CHECK_DISABLE`,
which instructs Vagrant to not check for box updates when running
regular Vagrant commands. This behaves the same as the existing
`config.vm.box_update_check` configuration option, but can be set
globally. Vagrantfile-supplied options will take precedence.
Fixes GH-7479
The change to this file 10 days ago removed a newline character at the end of each key added to it. This mean that when another key was added, it continued on the same line as the one before and thus wasn't being detected when an ssh connection came in with a key file.
With regards to https://github.com/mitchellh/vagrant/issues/7455 this is an (ugly) fix.
I'm sure someone knows a better command to concat a file and a string and append it to the `authorized_keys` file. But this does fix the problem.
This commit include the following changes:
- systematically set ANSIBLE_ROLES_PATH environment variable when
galaxy_roles_path is defined.
- slightly refactor to introduce the concept of "provisioning working
directory" (possible usage in the future for resolving GH-7195)
- fix a bug in ansible-galaxy execution by the ansible_local provisioner
if the paths contains blank characters.
Fix#7269
These changes have been validated against the following guest systems:
- Debian 7 and 8
- Ubuntu 12.04, 14.04 and 16.04
- Fedora 21 and 23
- CentOS 7
- OracleLinux 7
- Scientific Linux 7
At the moment, the pip setup (via get-pip.py script) is not working for
RHEL6-like systems (CentOS 6.6, OracleLinux 6.5, Scientific Linux 6),
because Python 2.6 has been deprecated and is no longer supported by
Python core team. I consider this limitation with low priority in
Vagrant context.
The `:pip` install_mode is currently not implemented for the following
platforms:
- OpenSUSE
- ArchLinux
- FreeBSD
Known Issue: By using get-pip.py script, any previous pip installation
will be most probably overrided. This could be an issue for Python
developers who would prefer to keep their base box setup untouched. In
future iteration, it could be possible to choose to reinstall/upgrade
pip or not. issue for Python developers who would prefer to keep their
base box setup untouched. In future iteration, it could be possible to
choose to reinstall/upgrade pip or not.
Resolve GH-6654
Resolve GH-7167 as the `version` option is now considered to select the
version of Ansible to be installed.
Currently the code tries to detect if Arch uses systemd via checking
comm= of PID 1. As access to proc filesystem might be restricted due to
hideproc set and systemd is default for all Arch Linux installations
since October 2012, let's just ditch that check.
Previously this was very complicated trying to flip between Ruby and
bash. This commit uses a single bash command that decides between yum
and dnf in the script itself.
This commit refactors the freebsd networking to:
1. Use predictable network naming
2. Properly handle DHCP vs static networks on up and reload [GH-5852]
3. Perform all networking configuration in a single command to prevent
partial configuration.
This updates the guest capabilities to run in as few communicator
commands as possible. Additionally, it fixes a number of issues around
hostname and idempotency.
This patch was tested against:
- puphpet/debian75-x64
- debian/jessie64
- debian/wheezy64
with custom networking, custom hostname, and rsync shared folders.
