Unify libcrypto initialization and explicit digest fetching in a single
place and move relevant code to the isc__crypto namespace instead of
isc__tls.
It will remove the remaining implicit fetching and deduplicate explicit
fetching inside the codebase.
This commit ensures that the port is set before attempting a UDP
query. Before that a situation could appear when previous query have
completed over a different transport (that uses a dedicated port) and
then a UDP query will be attempted over the port of the previous
transport.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
The question section should be present in the first AXFR/IXFR
response and in other QUERY responses unless no question was sent.
Issue a warning if the question section is not present.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
If bufsize overflows we will have an infinite loop. In practice
this will not happen unless we have made a coding error. Add an
INSIST to detect this condition.
181retry:
182 isc_buffer_allocate(mctx, &b, bufsize);
183 result = dns_rdata_totext(rdata, NULL, b);
184 if (result == ISC_R_NOSPACE) {
185 isc_buffer_free(&b);
CID 498031: (#1 of 1): Overflowed constant (INTEGER_OVERFLOW)
overflow_const: Expression bufsize, which is equal to 0, overflows
the type that receives it, an unsigned integer 32 bits wide.
186 bufsize *= 2;
187 goto retry;
188 }
If size overflows we will have an infinite loop. In practice
this will not happen unless we have made a coding error. Add
an INSIST to detect this condition.
181 while (!done) {
182 isc_buffer_allocate(mctx, &b, size);
183 result = dns_rdata_totext(rdata, NULL, b);
184 if (result == ISC_R_SUCCESS) {
185 printf("%.*s\n", (int)isc_buffer_usedlength(b),
186 (char *)isc_buffer_base(b));
187 done = true;
188 } else if (result != ISC_R_NOSPACE) {
189 check_result(result, "dns_rdata_totext");
190 }
191 isc_buffer_free(&b);
CID 498025: (#1 of 1): Overflowed constant (INTEGER_OVERFLOW)
overflow_const: Expression size, which is equal to 0, overflows the type that
receives it, an unsigned integer 32 bits wide.
192 size *= 2;
193 }
With _exit() instead of exit() in place, we don't need
isc__tls_setfatalmode() mechanism as the atexit() calls will not be
executed including OpenSSL atexit hooks.
Since the fatal() isn't a correct but rather abrupt termination of the
program, we want to skip the various atexit() calls because not all
memory might be freed during fatal() call, etc. Using _exit() instead
of exit() has this effect - the program will end, but no destructors or
atexit routines will be called.
Dig failed to print a comment about the reason of the unacceptable
query reply got from a server when there was no other query to
start in the lookup's chain.
Add an "else" block to print out the comment even when not starting
up the next query.
When getting a SERVFAIL reply from a query, 'host' tries to start
the next query in the lookup's list (also true for 'dig +nofail').
However, when running with the '-C' switch (or +nssearch for 'dig'),
all the queries in the lookup start from the beginning, so that logic
brings to a crash because of the attempted start of the query which
was already started.
Don't start the next query in the affected code path when in +nssearch
mode.
certain dig options which were deprecated and became nonoperational
several releases ago still had documentation in the dig man page and
warnings printed when they were used: these included +mapped,
+sigchase, +topdown, +unexpected, +trusted-key, and the -i and -n
options. these are now all fatal errors.
another option was described as deprecated in the man page, but
the code to print a warning was never added. it has been added now.
This commit adds PROXYv2 support into dig by the means of adding
+[no]proxy and +[no]proxy-plain options. Since this commit dig
supports sending PROXYv2 headers on all supported DNS-transports.
The support for PROXYv2 is modelled after that one in kdig.
When all the servers are exhausted for UDP setup emit "no servers
could be reached" in udp_ready(). This message can also be emitted
for a recv_done() error and for TCP connection failure similarly.
Instead of creating new memory pools for each new dns_message, change
dns_message_create() method to optionally accept externally created
dns_fixedname_t and dns_rdataset_t memory pools. This allows us to
preallocate the memory pools in ns_client and dns_resolver units for the
lifetime of dns_resolver_t and ns_clientmgr_t.
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
- remove the 'ring' parameter from dns_tsigkey_createfromkey(),
and use dns_tsigkeyring_add() to add key objects to a keyring instead.
- add a magic number to dns_tsigkeyring_t
- change dns_tsigkeyring_dumpanddetach() to dns_tsigkeyring_dump();
we now call dns_tsigkeyring_detach() separately.
- remove 'maxgenerated' from dns_tsigkeyring_t since it never changes.
- style cleanups.
- simplify the function parameters to dns_tsigkey_create():
+ remove 'restored' and 'generated', they're only ever set to false.
+ remove 'creator' because it's only ever set to NULL.
+ remove 'inception' and 'expiry' because they're only ever set to
(0, 0) or (now, now), and either way, this means "never expire".
+ remove 'ring' because we can just use dns_tsigkeyring_add() instead.
- rename dns_keyring_restore() to dns_tsigkeyring_restore() to match the
rest of the functions operating on dns_tsigkeyring objects.
The check_if_done() function can pass control back out to
dighost_shutdown() (which is part of dig.c, host.c, or nslookup.c),
and calling that twice can cause unexpected problems, if it is not
designed to be idempotent.
Since cancel_lookup() calls check_if_done() implicitly, don't call
check_if_done() again when 'next' is NULL.
When fatal is called we may be holding memory allocated by OpenSSL.
This may result in the reference count for the FIPS provider not
going to zero and the shared library not being unloaded during
OPENSSL_cleanup. When the shared library is ultimately unloaded,
when all remaining dynamically loaded libraries are freed, we have
already destroyed the memory context we where using to track memory
leaks / late frees resulting in INSIST being called.
Disable triggering the INSIST when fatal has being called.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
When the loopmanager is shutting down following a signal,
`dig` and `host` should stop cleanly. Before this commit
they were oblivious to ISC_R_SHUTTINGDOWN.
The `isc_signal` callbacks now report this kind of mistake
with a stack backtrace.
Instead of marking the unused entities with UNUSED(x) macro in the
function body, use a `ISC_ATTR_UNUSED` attribute macro that expans to
C23 [[maybe_unused]] or __attribute__((__unused__)) as fallback.
Change the isc_job_run() to not-make any allocations. The caller must
make sure that it allocates isc_job_t - usually as part of the argument
passed to the callback.
For simple jobs, using isc_async_run() is advised as it allocates its
own separate isc_job_t.
stop and restart the server in the 'tsiggss' test, in order
to confirm that GSS negotiated TSIG keys are saved and restored
when named loads.
added logging to dns_tsigkey_createfromkey() to indicate whether
a key has been statically configured, generated via GSS negotiation,
or restored from a file.
`libirs` used to be a reference implementation of `getaddrinfo` and
related modern resolver APIs. It was stripped down in BIND 9.18
leaving only the `irs_resconf` module, which parses
`/etc/resolv.conf`. I have kept its include path and namespace prefix,
so it remains a little fragment of libirs now embedded in libdns.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
Free/detach tsigkey and sig0key when exiting and then call
dst_lib_destroy if we have previously called dst_lib_init. This will,
in theory, allow OPENSSL_cleanup to free all memory.
removed some functions that are no longer used and unlikely to
be resurrected, and also some that were only used to support Windows
and can now be replaced with generic versions.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
Remove the trailing '\0' so that the length field of the dns_name_t
structure is correct. The old data just happens to work with
dns_name_issubdomain but would fail with dns_name_equal.
All we need for compression is a very small hash set of compression
offsets, because most of the information we need (the previously added
names) can be found in the message using the compression offsets.
This change combines dns_compress_find() and dns_compress_add() into
one function dns_compress_name() that both finds any existing suffix,
and adds any new prefix to the table. The old split led to performance
problems caused by duplicate names in the compression context.
Compression contexts are now either small or large, which the caller
chooses depending on the expected size of the message. There is no
dynamic resizing.
There is a behaviour change: compression now acts on all the labels in
each name, instead of just the last few.
A small benchmark suggests this is about 2x faster.
In several places, the structures were cleaned with memset(...)) and
thus the semantic patch converted the isc_mem_get(...) to
isc_mem_getx(..., ISC_MEM_ZERO). Use the designated initializer to
initialized the structures instead of zeroing the memory with
ISC_MEM_ZERO flag as this better matches the intended purpose.
Add new semantic patch to replace the straightfoward uses of:
ptr = isc_mem_{get,allocate}(..., size);
memset(ptr, 0, size);
with the new API call:
ptr = isc_mem_{get,allocate}x(..., size, ISC_MEM_ZERO);
There's a known memory leak in the engine_pkcs11 at the time of writing
this and it interferes with the named ability to check for memory leaks
in the OpenSSL memory context by default.
Add an autoconf option to explicitly enable the memory leak detection,
and use it in the CI except for pkcs11 enabled builds. When this gets
fixed in the engine_pkc11, the option can be enabled by default.
As we can't check the deallocations done in the library memory contexts
by default because it would always fail on non-clean exit (that happens
on error or by calling exit() early), we just want to enable the checks
to be done on normal exit.
If there are any problems with IDN processing, DiG will now quietly
handle the name as if IDN were disabled. This means that international
query names are rendered verbatim on the wire, and ACE names are
printed raw without conversion to UTF8.
If you want to check the syntax of international domain names,
use the `idn2` utility.
In several cases where IDNA2008 mappings do not exist whereas IDNA2003
mappings do, dig was failing to process the suplied domain name. Take a
backwards compatible approach, and convert the domain to IDNA2008 form,
and if that fails try the IDNA2003 conversion.
YAML strings should be quoted if they contain colon characters.
Since IPv6 addresses do, we now quote the query_address and
response_address strings in all YAML output.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
Clean up dns_rdatalist_tordataset() and dns_rdatalist_fromrdataset()
functions by making them return void, because they cannot fail.
Clean up other functions that subsequently cannot fail.
When DiG finishes its work with a lookup (due to success or error), it
calls the clear_current_lookup() function, which decreases the lookup's
reference count. That decrease action is the counterpart of the initial
creation of the reference counter, so this function was designed in such
a way that it should decrease the reference count only once, when there
are no more active queries in the lookup.
The way it checks whether there are any active queries is by looking
at the queries list of the lookup object - if it's NULL then there are
no active queries. But that is not always true - the cancel_lookup()
function, when canceling the queries one by one, also removes them
from the lookup's list, but in NSSEARCH mode, when the queries are
working in parallel, some of those queries can be still active. And
when their recv_done() callback gets called, it sees that the lookup
has been canceled, calls clear_current_lookup(), which decreases the
reference count every time for each query that was still active
(because ISC_LIST_HEAD(lookup->q) is NULL) and results in a reference
counting error.
Fix the issue by introducing a new "cleared" property for the lookup,
which will ensure that the clear_current_lookup() function does its
job only once per lookup.
In the NSSEARCH followup lookup, when one of the queries fails to be
set up (UDP) or connected (TCP), DiG doesn't start the next query.
This is a mistake, because in NSSEARCH mode the queries are independent
and DiG shouldn't stop the lookup process just because setting up (or
connecting to) one of the name servers returns an error code in the
`udp_ready()` or `tcp_connected()` callbacks.
Write a new `nssearch_next()` function which takes care of starting the
next query in NSSEARCH mode, so it can be used in several places without
code repetition.
Make sure that the `udp_ready()` and `tcp_connected()` functions call
`nssearch_next()` in case they won't be calling `send_udp()` and
`send_tcp()` respectively, because in that case the `send_done()`
callback, which usually does the job, won't be called.
Refactor `send_done()` to use the newly written `nssearch_next()`
function.
In the NSSEARCH followup lookup, when one of the queries fails to be
sent, DiG doesn't start the next query. This is a mistake, because in
NSSEARCH mode the queries are independent and DiG shouldn't stop the
lookup process just because sending a query to one of the name servers
returns an error code.
Restructure the `send_done()` function to unconditionally send the next
query in NSSEARCH mode, if it exists.
DiG implements different logic in the `recv_done()` callback function
when processing a failure:
1. For a timed-out query it applies the "retries" logic first, then,
when it fails, fail-overs to the next server.
2. For an EOF (end-of-file, or unexpected disconnect) error it tries to
make a single retry attempt (even if the user has requested more
retries), then, when it fails, fail-overs to the next server.
3. For other types of failures, DiG does not apply the "retries" logic,
and tries to fail-over to the next servers (again, even if the user
has requested to make retries).
Simplify the logic and apply the same logic (1) of first retries, and
then fail-over, for different types of failures in `recv_done()`.
When the `send_done()` callback function gets called with a failure
result code, DiG erroneously cancels the lookup.
Stop canceling the lookup and give DiG a chance to retry the failed
query, or fail-over to another server, using the logic implemented in
the `recv_done()` callback function.
When the `udp_ready()` callback function gets called with a failure
result code, DiG erroneously cancels the lookup.
Copy the logic behind `tcp_connected()` callback function into
`udp_ready()` so that DiG will now retry the failed query (if retries
are enabled) and then, if it fails again, it will fail-over to the next
server in the list, which synchronizes the behavior between TCP and UDP
modes.
Also, `udp_ready()` was calling `lookup_detach()` without calling
`lookup_attach()` first, but the issue was masked behind the fact
that `clear_current_lookup()` wasn't being called when needed, and
`lookup_detach()` was compensating for that. This also has been fixed.
Instead of returning error values from isc_rwlock_*(), isc_mutex_*(),
and isc_condition_*() macros/functions and subsequently carrying out
runtime assertion checks on the return values in the calling code,
trigger assertion failures directly in those macros/functions whenever
any pthread function returns an error, as there is no point in
continuing execution in such a case anyway.
In special NS search mode, after the initial lookup, dig starts the
followup lookup with discovered NS servers in the queries list. If one
of those queries then fail, dig, as usual, tries to start the next query
in the list, which results in a crash, because the NS search mode is
special in a way that the queries are running in parallel, so the next
query is usually already started.
Apply some special logic in `recv_done()` function to deal with the
described situation when handling the query result for the NS search
mode. Particularly, print a warning message for the failed query,
and do not try to start the next query in the list. Also, set a non-zero
exit code if all the queries in the followup lookup fail.
Fix an issue reported by Coverity by removing the unneded check.
*** CID 352554: Null pointer dereferences (REVERSE_INULL)
/bin/dig/dighost.c: 3056 in start_tcp()
3050
3051 if (ISC_LINK_LINKED(query, link)) {
3052 next = ISC_LIST_NEXT(query, link);
3053 } else {
3054 next = NULL;
3055 }
>>> CID 352554: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "connectquery" suggests that it may be null, but it
has already been dereferenced on all paths leading to the check.
3056 if (connectquery != NULL) {
3057 query_detach(&connectquery);
3058 }
3059 query_detach(&query);
3060 if (next == NULL) {
3061 clear_current_lookup();
There was a proposal in the late 1990s that it might, but it turned
out to be unworkable. See RFC 6891, Extension Mechanisms for
DNS (EDNS(0)), section 5, Extended Label Types.
The remnants of the code that supported this in BIND are redundant.
Previously, tasks could be created either unbound or bound to a specific
thread (worker loop). The unbound tasks would be assigned to a random
thread every time isc_task_send() was called. Because there's no logic
that would assign the task to the least busy worker, this just creates
unpredictability. Instead of random assignment, bind all the previously
unbound tasks to worker 0, which is guaranteed to exist.
This commit removes dead code from cleanup handling part of the
get_create_tls_context().
In particular, currently:
* there is no way 'found_ctx' might equal 'ctx';
* there is no way 'session_cache' might equal a non-NULL value while
cleaning up after a TLS initialisation error.
This commit ensures that isc_nm_cancelread() is not called from within
dig code for HTTP sockets, as these lack its implementation.
It does not have much sense to have it due to transactional nature of
HTTP.
Every HTTP request-response pair is represented by a virtual socket,
where read callback is called only when full DNS message is received
or when an error code is being passed there. That is, there is nothing
to cancel at the time of the call.
