because dig now uses the netmgr, printing of response messages
happens in a different thread than setup. the IDN output filtering
procedure, which set using dns_name_settotextfilter(), is stored as
thread-local data, and so if it's set during setup, it won't be
accessible when printing. we now set it immediately before printing,
in the same thread, and clear it immedately afterward.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
The dns_message_create() function cannot soft fail (as all memory
allocations either succeed or cause abort), so we change the function to
return void and cleanup the calls.
This commit updates and simplifies the checks for the readline support
in nslookup and nsupdate:
* Change the autoconf checks to pkg-config only, all supported
libraries have accompanying .pc files now.
* Add editline support in addition to libedit and GNU readline
* Add isc/readline.h shim header that defines dummy readline()
function when no readline library is available
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
On Windows, C11 localtime_r() and gmtime_r() functions are not
available. While localtime() and gmtime() functions are already thread
safe because they use Thread Local Storage, it's quite ugly to #ifdef
around every localtime_r() and gmtime_r() usage to make the usage also
thread-safe on POSIX platforms.
The commit adds wrappers around Windows localtime_s() and gmtime_s()
functions.
NOTE: The implementation of localtime_s and gmtime_s in Microsoft CRT
are incompatible with the C standard since it has reversed parameter
order and errno_t return type.
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
this corrects some style glitches such as:
```
long_function_call(arg, arg2, arg3, arg4, arg5, "str"
"ing");
```
...by adjusting the penalties for breaking strings and call
parameter lists.
The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
The isc_mempool_create() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_mempool_create() now returns void.
Previously, the dns_name API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables.
The indentation for dumping the master zone was driven by two
global variables dns_master_indent and dns_master_indentstr. In
threaded mode, this becomes prone to data access races, so this commit
converts the global variables into a local per-context tuple that
consist of count and string.
When a task manager is created, we can now specify an `isc_nm`
object to associate with it; thereafter when the task manager is
placed into exclusive mode, the network manager will be paused.
The coccinellery repository provides many little semantic patches to fix common
problems in the code. The number of semantic patches in the coccinellery
repository is high and most of the semantic patches apply only for Linux, so it
doesn't make sense to run them on regular basis as the processing takes a lot of
time.
The list of issue found in BIND 9, by no means complete, includes:
- double assignment to a variable
- `continue` at the end of the loop
- double checks for `NULL`
- useless checks for `NULL` (cannot be `NULL`, because of earlier return)
- using `0` instead of `NULL`
- useless extra condition (`if (foo) return; if (!foo) { ...; }`)
- removing & in front of static functions passed as arguments
This commit was done by hand to add the RUNTIME_CHECK() around stray
dns_name_copy() calls with NULL as third argument. This covers the edge cases
that doesn't make sense to write a semantic patch since the usage pattern was
unique or almost unique.
This commit add RUNTIME_CHECK() around all simple dns_name_copy() calls where
the third argument is NULL using the semantic patch from the previous commit.
It is possible dig used ACE encoded name in locale, which does not
support converting it to unicode. Instead of fatal error, fallback to
ACE name on output.
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
isc_event_allocate() calls isc_mem_get() to allocate the event structure. As
isc_mem_get() cannot fail softly (e.g. it never returns NULL), the
isc_event_allocate() cannot return NULL, hence we remove the (ret == NULL)
handling blocks using the semantic patch from the previous commit.
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
The ax_check_openssl m4 macro used OPENSSL_INCLUDES. Rename the
subst variable to OPENSSL_CFLAGS and wrap AX_CHECK_OPENSSL() in
action-if-not-found part of PKG_CHECK_MODULE check for libcrypto.
The json-c have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
The libxml2 have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
dig retries a TCP query when a server closes the connection prematurely.
However, dig's exit code remains unaffected even if the second attempt
to get a response also fails with the same error for the same lookup,
which should not be the case. Ensure the exit code is updated
appropriately when a retry triggered by a TCP EOF condition fails.
When a query times out after a socket is created and associated with a
given dig_query_t structure, calling isc_socket_cancel() causes
connect_done() to be run, which in turn takes care of all necessary
cleanups. However, certain errors (e.g. get_address() returning
ISC_R_FAMILYNOSUPPORT) may prevent a TCP socket from being created in
the first place. Since force_timeout() may be used in code handling
such errors, connect_timeout() needs to properly clean up a TCP query
which is not associated with any socket. Call clear_query() from
connect_timeout() after attempting to send a TCP query to the next
available server if the timed out query does not have a socket
associated with it, in order to prevent dig from hanging indefinitely
due to the dig_query_t structure not being detached from its parent
dig_lookup_t structure.
When a query times out and another server is available for querying
within the same lookup, the timeout handler - connect_timeout() - is
responsible for sending the query to the next server. Extract the
relevant part of connect_timeout() to a separate function in order to
improve code readability.
Before commit c2ec022f57, using the "-b"
command line switch for dig did not disable use of the other address
family than the one to which the address supplied to that option
belonged to. Thus, bind9_getaddresses() could e.g. prepare an
isc_sockaddr_t structure for an IPv6 address when an IPv4 address has
been passed to the "-b" command line option. To avoid attempting the
impossible (e.g. querying an IPv6 address from a socket bound to an IPv4
address), a certain code block in send_tcp_connect() checked whether the
address family of the server to be queried was the same as the address
family of the socket set up for sending that query; if there was a
mismatch, that particular server address was skipped.
Commit c2ec022f57 made
bind9_getaddresses() fail upon an address family mismatch between the
address the hostname passed to it resolved to and the address supplied
to the "-b" command line option. Such failures were fatal to dig back
then.
Commit 7f65860391 made
bind9_getaddresses() failures non-fatal, but also ensured that a
get_address() failure in send_tcp_connect() still causes the given query
address to be skipped (and also made such failures trigger an early
return from send_tcp_connect()).
Summing up, the code block handling address family mismatches in
send_tcp_connect() has been redundant since commit
c2ec022f57. Remove it.
In BIND 9.11 and earlier, dig and similar tools used liblwres for
parsing /etc/resolv.conf. After getting a list of servers from
liblwres, a tool would check the address family of each server found and
reject those unusable. When the resulting list of usable servers was
empty, localhost addresses were queried as a fallback.
When liblwres was removed in BIND 9.12, dig and similar tools were
updated to parse /etc/resolv.conf using libirs instead. As part of that
process, the localhost fallback was removed from bin/dig/dighost.c since
the localhost fallback built into libirs was deemed to be sufficient.
However, libirs only falls back to localhost if it does not find any
name servers at all; if it does find any valid nameserver entry in
/etc/resolv.conf, it just returns it to the caller because it is
oblivious to whether the caller supports IPv4 and/or IPv6 or not. The
code in bin/dig/dighost.c subsequently filters the returned list of
servers in get_server_list() according to the requested address family
restrictions. This may result in none of the addresses returned by
libirs being usable, in which case a tool will attempt to work with an
empty server list, causing a hang and subsequently a crash upon user
interruption.
Restore the localhost fallback in bin/dig/dighost.c to prevent the
aforementioned hangs and crashes and ensure recent BIND versions behave
identically to the older ones in the circumstances described above.
If a tool using the routines defined in bin/dig/dighost.c is sent an
interruption signal around the time a connection timeout is scheduled to
fire, connect_timeout() may be executed after destroy_libs() detaches
from the global task (setting 'global_task' to NULL), which results in a
crash upon a UDP retry due to bringup_timer() attempting to create a
timer with 'task' set to NULL. Fix by preventing connect_timeout() from
attempting a retry when shutdown is in progress.
While implementing the new unit testing framework cmocka, it was found that the
BIND 9 code doesn't compile when assertions are disabled or replaced with any
function (such as mock_assert() from cmocka unit testing framework) that's not
directly recognized as assertion by the compiler.
This made the compiler to complain about blocks of code that was recognized as
unreachable before, but now it isn't.
The changes in this commit include:
* assigns default values to couple of local variables,
* moves some return statements around INSIST assertions,
* adds __builtin_unreachable(); annotations after some INSIST assertions,
* fixes one broken assertion (= instead of ==)
Refactor diagnostic tools code to no longer use:
- isc_socket_recvv()
- isc_socket_sendtov2()
- isc_socket_sendv()
as these functions will be removed shortly.
Manual page of host contained instructions to disable IDN processing
when it was built with libidn2. When refactoring IDN support however,
support for disabling IDN in host and nslookup was lost. Use also
environment variable and document it for nslookup, host and dig.
The "exitcode" variable is set to 9 if a TCP connection fails, but is
not reset to 0 if a subsequent TCP connection succeeds. This causes dig
to return a non-zero exit code if it succeeds in getting a TCP response
after a retry. Fix by resetting "exitcode" to 0 if connect_done()
receives an event with the "result" field set to ISC_R_SUCCESS.
Make will choose modified manual from build directory or original from source
directory automagically. Take advantage of install tool feature.
Install all files in single command instead of iterating on each of them.
While idn2_to_unicode_8zlz() takes a 'flags' argument, it is ignored and
thus cannot be used to perform IDN checks on the output string.
The bug in libidn2 versions before 2.0.5 was not that a call to
idn2_to_unicode_8zlz() with certain flags set did not cause IDN checks
to be performed. The bug was that idn2_to_unicode_8zlz() did not check
whether a conversion can be performed between UTF-8 and the current
locale's character encoding. In other words, with libidn2 version
2.0.5+, if the current locale's character encoding is ASCII, then
idn2_to_unicode_8zlz() will fail when it is passed any Punycode string
which decodes to a non-ASCII string, even if it is a valid IDNA2008
name.
Rework idn_ace_to_locale() so that invalid IDNA2008 names are properly
and consistently detected for all libidn2 versions and locales.
Update the "idna" system test accordingly. Add checks for processing a
server response containing Punycode which decodes to an invalid IDNA2008
name. Fix invalid subtest description.
Since idn_output_filter() no longer uses its 'absolute' argument and no
other callback is used with dns_name_settotextfilter(), remove the
'absolute' argument from the dns_name_totextfilter_t prototype.
output_filter() does not need to dot-terminate its input name because
libidn2 properly handles both dot-terminated and non-dot-terminated
names. libidn2 also does not implicitly dot-terminate names passed to
it, so parts of output_filter() handling dot termination can simply be
removed.
Fix a logical condition to make sure 'src' can fit the terminating NULL
byte. Replace the MAXDLEN macro with the MXNAME macro used in the rest
of dig source code. Tweak comments and variable names.
Rename output_filter() to idn_output_filter() so that it can be easily
associated with IDN and other idn_*() functions.
idn_ace_to_locale() may return a string longer than MAXDLEN because it
is using the current locale's character encoding. Rather then imposing
an arbitrary limit on the length of the string that function can return,
make it pass the string prepared by libidn2 back to the caller verbatim,
making the latter responsible for freeing that string. In conjunction
with the fact that libidn2 errors are considered fatal, this makes
returning an isc_result_t from idn_ace_to_locale() unnecessary.
Do not process success cases in conditional branches for improved
consistency with the rest of BIND source code. Add a comment explaining
the purpose of idn_ace_to_locale(). Rename that function's parameters
to match common BIND naming pattern.
idn_locale_to_ace() is a static function which is always used with a
buffer of size MXNAME, i.e. one that can fit any valid domain name.
Since libidn2 detects invalid domain names and libidn2 errors are
considered fatal, remove size checks from idn_locale_to_ace(). This
makes returning an isc_result_t from it unnecessary.
Do not process success cases in conditional branches for improved
consistency with the rest of BIND source code. Add a comment explaining
the purpose of idn_locale_to_ace(). Rename that function's parameters
to match common BIND naming pattern.
Certain characters, like symbols, are allowed by IDNA2003, but not by
IDNA2008. Make dig reject such symbols when IDN input processing is
enabled to ensure BIND only supports IDNA2008. Update the "idna" system
test so that it uses one of such symbols rather than one which is
disallowed by both IDNA2003 and IDNA2008.
There is no need to call dns_name_settotextfilter() in setup_system()
because setup_lookup() determines whether IDN output processing should
be enabled for a specific lookup (taking the global setting into
consideration) and calls dns_name_settotextfilter() anyway if it is.
Remove the dns_name_settotextfilter() call from setup_system().
Clean up the parts of configure.in responsible for handling libidn2
detection and adjust other pieces of the build system to match these
cleanups:
- use pkg-config when --with-libidn2 is used without an explicit path,
- look for idn2_to_ascii_lz() rather than idn2_to_ascii_8z() as the
former is used in BIND while the latter is not,
- do not look for idn2_to_unicode_8zlz() as it is present in all
libidn2 versions which have idn2_to_ascii_lz(),
- check whether the <idn2.h> header is usable,
- set LDFLAGS in the Makefile for dig so that, if specified, the
requested libidn2 path is used when linking with libidn2,
- override CPPFLAGS when looking for libidn2 components so that the
configure script does not produce warnings when libidn2 is not
installed system-wide,
- merge the AS_CASE() call into the AS_IF() call below it to simplify
code,
- indicate the default value of --with-libidn2 in "./configure --help"
output,
- use $with_libidn2 rather than $use_libidn2 to better match the name
of the configure script argument,
- stop differentiating between IDN "in" and "out" support, i.e. make
dig either support libidn2 or not; remove WITH_* Autoconf macros and
use a new one, HAVE_LIBIDN2, to determine whether libidn2 support
should be enabled.
This commit reverts the previous change to use system provided
entropy, as (SYS_)getrandom is very slow on Linux because it is
a syscall.
The change introduced in this commit adds a new call isc_nonce_buf
that uses CSPRNG from cryptographic library provider to generate
secure data that can be and must be used for generating nonces.
Example usage would be DNS cookies.
The isc_random() API has been changed to use fast PRNG that is not
cryptographically secure, but runs entirely in user space. Two
contestants have been considered xoroshiro family of the functions
by Villa&Blackman and PCG by O'Neill. After a consideration the
xoshiro128starstar function has been used as uint32_t random number
provider because it is very fast and has good enough properties
for our usage pattern.
The other change introduced in the commit is the more extensive usage
of isc_random_uniform in places where the usage pattern was
isc_random() % n to prevent modulo bias. For usage patterns where
only 16 or 8 bits are needed (DNS Message ID), the isc_random()
functions has been renamed to isc_random32(), and isc_random16() and
isc_random8() functions have been introduced by &-ing the
isc_random32() output with 0xffff and 0xff. Please note that the
functions that uses stripped down bit count doesn't pass our
NIST SP 800-22 based random test.
- Replace external -DOPENSSL/-DPKCS11CRYPTO with properly AC_DEFINEd
HAVE_OPENSSL/HAVE_PKCS11
- Don't enforce the crypto provider from platform.h, just from dst_api.c
and configure scripts
The three functions has been modeled after the arc4random family of
functions, and they will always return random bytes.
The isc_random family of functions internally use these CSPRNG (if available):
1. getrandom() libc call (might be available on Linux and Solaris)
2. SYS_getrandom syscall (might be available on Linux, detected at runtime)
3. arc4random(), arc4random_buf() and arc4random_uniform() (available on BSDs and Mac OS X)
4. crypto library function:
4a. RAND_bytes in case OpenSSL
4b. pkcs_C_GenerateRandom() in case PKCS#11 library
Replace dns_fixedname_init() calls followed by dns_fixedname_name()
calls with calls to dns_fixedname_initname() where it is possible
without affecting current behavior and/or performance.
This patch was mostly prepared using Coccinelle and the following
semantic patch:
@@
expression fixedname, name;
@@
- dns_fixedname_init(&fixedname);
...
- name = dns_fixedname_name(&fixedname);
+ name = dns_fixedname_initname(&fixedname);
The resulting set of changes was then manually reviewed to exclude false
positives and apply minor tweaks.
It is likely that more occurrences of this pattern can be refactored in
an identical way. This commit only takes care of the low-hanging fruit.
Emit fatal failures on locale to ACE encoding
Separate idnout support, disable it for libidn2 < 2.0
Add custom path to libidn. Leave default path for multilib support.
Allow turning off IDN input processing by dig option
Improve documentation, fix support in host
Fix configure changes to adjust help text
Use strlcpy with size guard
Improve IDN variants choosing. Fix idn2 function name.
Remove immediate idn_locale_to_ace and idn_ace_to_locale.
Signed-off-by: Petr Menšík <pemensik@redhat.com>
Added two new configure options:
--with-libidn2 - to enable IDN using GNU libidn2
idnkit, libidn and libidn2 support can not be used at the same time.
NOTE: libidn2 does not support punycode back to Unicode
characters, so support for this is missing.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Removed iconv, convert directly from locale to ACE
Fix libidn2 and idnkit origin appending
Make IDN options in help less different
Signed-off-by: Petr Menšík <pemensik@redhat.com>
Added new configure option:
--with-libidn - to enable IDN using GNU libidn
Renamed configure option:
--with-idn to --with-idnkit to make the option usage more clear
idnkit and libidn support can not be used at the same time.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
4756. [bug] Interrupting dig could lead to an INSIST failure after
certain errors were encountered while querying a host
whose name resolved to more than one address. Change
4537 increased the odds of triggering this issue by
causing dig to hang indefinitely when certain error
paths were evaluated. dig now also retries TCP queries
(once) if the server gracefully closes the connection
before sending a response. [RT #42832, #45159]
4708. [cleanup] Legacy Windows builds (i.e. for XP and earlier)
are no longer supported. [RT #45186]
4707. [func] The lightweight resolver daemon and library (lwresd
and liblwres) have been removed. [RT #45186]
4706. [func] Code implementing name server query processing has
been moved from bin/named to a new library "libns".
Functions remaining in bin/named are now prefixed
with "named_" rather than "ns_". This will make it
easier to write unit tests for name server code, or
link name server functionality into new tools.
[RT #45186]
4674. [func] "dig +sigchase", and related options "+topdown" and
"+trusted-keys", have been removed. Use "delv" for
queries with DNSSEC validation. [RT #42793]
4549. [func] Added support for the EDNS TCP Keepalive option
(RFC 7828). [RT #42126]
4548. [func] Added support for the EDNS Padding option (RFC 7830).
[RT #42094]
4503. [cleanup] "make uninstall" now removes file installed by
BIND. (This currently excludes Python files
due to lack of support in setup.py.) [RT #42912]
4307. [bug] "dig +subnet" and "mdig +subnet" could send
incorrectly-formatted Client Subnet options
if the prefix length was not divisble by 8.
Also fixed a memory leak in "mdig". [RT #45178]
4303. [bug] "dig +subnet" was unable to send a prefix length of
zero, as it was incorrectly changed to 32 for v4
prefixes or 128 for v6 prefixes. In addition to
fixing this, "dig +subnet=0" has been added as a
short form for 0.0.0.0/0. The same changes have
also been made in "mdig". [RT #41553]
