the target buffer passed to dns_name_concatenate() was never
used (except for one place in dig, where it wasn't actually
needed, and has already been removed in a prior commit).
we can safely remove the parameter.
this parameter was added as a (minor) optimization for
cases where dns_name_towire() is run repeatedly with the
same compression context, as when rendering all of the rdatas
in an rdataset. it is currently only used in one place.
we now simplify the interface by removing the extra parameter.
the compression offset value is now part of the compression
context, and can be activated when needed by calling
dns_compress_setmultiuse(). multiuse mode is automatically
deactivated by any subsequent call to dns_compress_permitted().
the dns_rdataslab_fromrdataset() function creates a slab
from an rdataset. if the source rdataset already uses a slab,
then no processing is necessary; we can just copy the existing
slab to a new location.
Previously, the hashmap iterator for fetches-per-zone was destroy
outside the rwlock. This could lead to an assertion failure due to a
timing race with the internal rehashing of the hashmap table as the
rehashing process requires no iterators to be running when rehashing the
hashmap table. This has been fixed by moving the destruction of the
iterator inside the read locked section.
The third argument to set_offsets() was only used in
dns_name_fromregion() and not really needed. We can remove the third
argument and then manually check whether the last label is root label.
There was just a single use of passing an extra buffer to
dns_name_downcase() which have been replaced by simple call to
isc_ascii_lowercase() and the 'target' argument from dns_name_downcase()
function has been removed.
The MAKE_EMPTY() macro was clearing up the output variable in case of
the failure. However, this was breaking the usual design pattern that
the output variables are left in indeterminate state or we don't touch
them at all when a failure occurs. Remove the macro and change the
dns_name_downcase() to not touch the name contents until success.
There was a back-and-forth between static arrays and the pointers to the
offsets. Since we are now only using the static arrays, we can cleanup
the usage of the pointers that would previously point either to the
static array or name->offsets if available.
The offsets were meant to speed-up the repeated dns_name operations, but
it was experimentally proven that there's actually no real-world
benefit. Remove the offsets and labels fields from the dns_name and the
static offsets fields to save 128 bytes from the fixedname in favor of
calculating labels and offsets only when needed.
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY.
To further add further robustness, we include an additional check for
unknown opcodes, and also drop those messages early.
Add early_sanity_check() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
- Unknown opcodes.
A change in 6aba56ae8 (checking whether a rejected RRset was identical
to the data it would have replaced, so that we could still cache a
signature) inadvertently introduced cases where processing of a
response would continue when previously it would have been skipped.
Acquire the database refernce in the detachnode() to prevent the last
reference to be release while the NODE_LOCK being locked. The NODE_LOCK
is locked/unlocked inside the RCU critical section, thus it is most
probably this should not pose a problem as the database uses call_rcu
memory reclamation, but this it is still safer to acquire the reference
before releasing the node.
As the default_call_rcu_thread can't be forced to flush all the work
during the executable shutdown, create one call_rcu_thread explicitly
and assign it to the all created threads.
This allows this explicit call_rcu_thread to be unassociated from the
main thread and freed before the executable destructor exits.
Instead of relying on unreliable order of execution of the library
constructors and destructors, move them to individual binaries. The
advantage is that the execution time and order will remain constant and
will not depend on the dynamic load dependency solver.
This requires more work, but that was mitigated by a simple requirement,
any executable using libisc and libdns, must include <isc/lib.h> and
<dns/lib.h> respectively (in this particular order). In turn, these two
headers must not be included from within any library as they contain
inlined functions marked with constructor/destructor attributes.
Previously, the dns_resolver_dumpfetches() would go over the fetch
counters. Alas, because of the earlier optimization, the fetch counters
would be increased only when fetches-per-zone was not 0, otherwise the
whole counting was skipped for performance reasons.
Instead of using the auxiliary fetch counters hash table, use the real
hash table that stores the fetch contexts to dump the ongoing fetches to
the recursing file.
Additionally print more information about the fetch context like start
and expiry times, number of fetch responses, number of queries and count
of allowed and dropped fetches.
The order of the fetch context hash table rwlock and the individual
fetch context was reversed when calling the release_fctx() function.
This was causing a problem when iterating the hash table, and thus the
ordering has been corrected in a way that the hash table rwlock is now
always locked on the outside and the fctx lock is the interior lock.
In the next commit, we need to know whether the timer has been started
or stopped. Add isc_timer_running() function that returns true if the
timer has been started.
After a reconfiguration the old view can be left without a valid
'rpzs' member, because when the RPZ is not changed during the named
reconfiguration 'rpzs' "migrate" from the old view into the new
view, so when a query resumes it can find that 'qctx->view->rpzs'
is NULL which query_resume() currently doesn't expect to happen if
it's recursing and 'qctx->rpz_st' is not NULL.
Fix the issue by adding a NULL-check. In order to not split the log
message to two different log messages depending on whether
'qctx->view->rpzs' is NULL or not, change the message to not log
the RPZ policy's "version" which is just a runtime counter and is
most likely not very useful for the users.
The isc_counter_create() doesn't need the return value (it was always
ISC_R_SUCCESS), use the macros to implement the reference counting,
little style cleanup, and expand the unit test.
Checking whether the authority section is properly signed should
be left to the validator. Checking in getsection (dns_message_parse)
was way too early and resulted in resolution failures of lookups
that should have otherwise succeeded.
Previously a hard-coded limitation of maximum two key or message
verification checks were introduced when checking the message's
SIG(0) signature. It was done in order to protect against possible
DoS attacks. The logic behind choosing the number two was that more
than one key should only be required only during key rotations, and
in that case two keys are enough. But later it became apparent that
there are other use cases too where even more keys are required, see
issue number #5050 in GitLab.
This change introduces two new configuration options for the views,
sig0key-checks-limit and sig0message-checks-limit, which define how
many keys are allowed to be checked to find a matching key, and how
many message verifications are allowed to take place once a matching
key has been found. The latter protects against expensive cryptographic
operations when there are keys with colliding tags and algorithm
numbers, with default being 2, and the former protects against a bit
less expensive key parsing operations and defaults to 16.
Running jobs which were entered into the isc_quota queue is the
responsibility of the isc_quota_release() function, which, when
releasing a previously acquired quota, checks whether the queue
is empty, and if it's not, it runs a job from the queue without touching
the 'quota->used' counter. This mechanism is susceptible to a possible
hangup of a newly queued job in case when between the time a decision
has been made to queue it (because used >= max) and the time it was
actually queued, the last quota was released. Since there is no more
quotas to be released (unless arriving in the future), the newly
entered job will be stuck in the queue.
Fix the wrong memory ordering for 'quota->used', as the relaxed
ordering doesn't ensure that data modifications made by one thread
are visible in other threads.
Add checks in both isc_quota_release() and isc_quota_acquire_cb()
to make sure that the described hangup does not happen. Also see
code comments.
Expose the average transfer rate (in bytes-per-second) during the
last full 'min-transfer-rate-in <bytes> <minutes>' minutes interval.
If no such interval has passed yet, then the overall average rate is
reported instead.
This new option sets a minimum amount of transfer rate for
an incoming zone transfer that will abort a transfer, which
for some network related reasons run very slowly.
Add a new dns_rdataset_equals() function to check whether two
rdatasets are equal in DNSSEC terms.
When an rdataset being cached is rejected because its trust
level is lower than the existing rdataset, we now check to see
whether the rejected data was identical to the existing data.
This allows us to cache a potentially useful RRSIG when handling
CD=1 queries, while still rejecting RRSIGs that would definitely
have resulted in a validation failure.
The "raw" version of the header was used for the noqname and the closest
proofs to save around 152 bytes of the dns_slabheader_t while bringing
an additional complexity. Remove the raw version of the dns_slabheader
API at the slight expense of having unused dns_slabheader_t data sitting
in front of the proofs.
reduce the number of rdata comparisons needed by walking
through the original slab once to determine whether the rdata
in it is duplicated in the slab to be subtracted, and then
write out the rdatas that aren't. previously, this was
done twice: once when determining the size of the target buffer
and then again when copying data into it.
when merging two rdata slabs, we now check once to see
whether an item in the new slab has a duplicate in the
old. previously this was done twice; once to determine the
size of the target buffer required, and then again when
copying the data into it.
we also minimize the number of rdata comparisons necessary,
by remembering which items in the old slab have already been
found to be duplicates.
The function name dns_slabheader_fromrdataset() was too similar
to dns_rdataslab_fromrdataset(). Instead, we now have an rdataset
method 'getheader' which is implemented for slab-type rdatasets.
A new NOHEADER rdataset attribute is set for rdatasets using
raw slabs (i.e., noqname and closest encloser proofs); when
called on rdatasets with that flag set, dns_rdataset_getheader()
returns NULL.
when dns_rdataslab_fromrdataset() is run, in addition to
allocating space for a slab header, it also partially
initializes it, setting the type match rdataset->type and
rdataset->covers, the trust to rdataset->trust, and the TTL to
rdataset->ttl.
there are now two functions for creating an rdataslab from an
rdataset: dns_rdataslab_fromrdataset() creates a full slab (including
space for a slab header), and dns_rdataslab_raw_fromrdataset() creates
a raw slab.
- there are now two functions for getting rdataslab size:
dns_rdataslab_size() is for full slabs and dns_rdataslab_sizeraw()
for raw slabs. there is no longer a need for a reservelen parameter.
- dns_rdataslab_count() also no longer takes a reservelen parameter.
(currently it's never used for raw slabs, so there is no _countraw()
function.)
- dns_rdataslab_rdatasize() has been removed, because
dns_rdataslab_sizeraw() can do the same thing.
- dns_rdataslab_merge() and dns_rdataslab_subtract() both take
slabheader parameters instead of character buffers, and the
reservelen parameter has been removed.
if both rdataslabs being compared have zero length, return true.
also, since these functions are only ever called on slabheaders
with sizeof(dns_slabheader_t) as the reserve length, we can
simplify the API: remove the reservelen argument, and pass the
slabs as type dns_slabheader_t * instead of unsigned char *.
The dns_slabheader object uses the 'next' pointer for two purposes.
In the first header for any given type, 'next' points to the first
header for the next type. But 'down' points to the next header of
the same type, and in that record, 'next' points back up.
This design made the code confusing to read. We now use a union
so that the 'next' pointer can also be called 'up'.
The value returned by http_send_outgoing() is not used anywhere, so we
make it not return anything (void). Probably it is an omission from
older times.
When handling outgoing data, there were a couple of rarely executed
code paths that would not take into account that the callback MUST be
called.
It could lead to potential memory leaks and consequent shutdown hangs.
This commit changes the way how the number of active HTTP streams is
calculated and allows it to scale with the values of the maximum
amount of streams per connection, instead of effectively capping at
STREAM_CLIENTS_PER_CONN.
The original limit, which is intended to define the pipelining limit
for TCP/DoT. However, it appeared to be too restrictive for DoH, as it
works quite differently and implements pipelining at protocol level by
the means of multiplexing multiple streams. That renders each stream
to be effectively a separate connection from the point of view of the
rest of the codebase.
Previously we would limit the amount of incoming data to process based
solely on the presence of not completed send requests. That worked,
however, it was found to severely degrade performance in certain
cases, as was revealed during extended testing.
Now we switch to keeping track of how much data is in flight (or ready
to be in flight) and limit the amount of processed incoming data when
the amount of in flight data surpasses the given threshold, similarly
to like we do in other transports.
Database versions are not used in cache databases. Some places in
qpcache.c required the version argument to be NULL; others marked it
as UNUSED. Unify all cases to require version to be NULL.
Add new related_headers() function that simplifies the code
flow in qpcache_findrdataset(). Also use check_stale_header() function
to remove code duplication.
Add a helper function both_headers() that unifies the slabheader
matching for simple type: it returns true when both the type and
the matching RRSIG have been found.
The new maybe_update_headers() function unifies the LRU updates to the
slabheaders that was scattered all over the place. More calls to update
headers after bindrdatasets() were also added for completeness.
This removes code duplication between the dual bindrdataset() calls. It
also unifies the handling as there were small differences between the
calls: one variant was checking for !NEGATIVE(found) condition and one
wasn't, and it is technically ok to do the check for all variants.
The check_stale_header() function now updates header_prev directly
so it doesn't have to be handled in the outer loop; it's always
set to the correct value of the previous header in the chain.
some code was left in the cache database implementation after
it was separated from the zone database, and can be cleaned up
and refactored now:
- the DNS_SLABHEADERATTR_IGNORE flag is never set in the cache
- support for loading the cache from was removed, but the add()
function still had a 'loading' flag that's always false
- two different macros were used for checking the
DNS_SLABHEADERATTR_NONEXISTENT flag - EXISTS() and NONEXISTENT().
it's clearer to just use EXISTS().
- the cache doesn't support versions, so it isn't necessary to
walk down the 'down' pointer chain when iterating through the
cache or looking for a header to update. 'down' now only points
to records that are deleted from the cache but have not yet been
purged from memory. this allows us to simplify both the iterator
and the add() function.
in some places there were checks for failures of dns_qp_insert()
after dns_qp_getname(). such failures could only happen if another
thread inserted a node between the two calls, and that can't happen
because the calls are serialized with dns_qpmulti_write(). we can
simplify the code and just add an INSIST.
When converting SVCB records to text representation use named
SvcParamKeys values unless backward-compatible mode is activated,
in which case the values which were not defined initially in
RFC9460 and were added later (see [1]) are converted to opaque
"keyN" syntax, like, for example, "key7" instead of "dohpath".
[1] https://www.iana.org/assignments/dns-svcb/dns-svcb.xhtml
Co-authored-by: sdomi <ja@sdomi.pl>
This commit does several changes to isc_symtab:
1. Rewrite the isc_symtab to internally use isc_hashmap instead of
hand-stiched hashtable.
2. Create a new isc_symtab_define_and_return() api, which returns
the already defined symvalue on ISC_R_EXISTS; this allows users
of the API to skip the isc_symtab_lookup()+isc_symtab_define()
calls and directly call isc_symtab_define_and_return().
3. Merge isccc_symtab into isc_symtab - the only missing function
was isccc_symtab_foreach() that was merged into isc_symtab API.
4. Add full set of unit tests for the isc_symtab API.
If a deferred validation on data that was originally queried with
CD=1 fails, we now repeat the query, since the zone data may have
changed in the meantime.
When a query is made with CD=1, we store the result in the
cache marked pending so that it can be validated later, at
which time it will either be accepted as an answer or removed
from the cache as invalid. Deferred validation was not
attempted when there were no cached RRSIGs for DNSKEY and
DS. We now complete the deferred validation in this scenario.
prio_type was being used in the wrong place to optimize cname_and_other.
We have to first exclude and accepted types and we also have to
determine that the record exists before we can check if we are at
a point where a later CNAME cannot appear.
Instead of using on hash of the name modulo number of the buckets,
assign the locknum randomly with isc_random_uniform(). This makes
the locknum assignment aligned with qpcache and allows the bucket
number to be non-prime in the future.
Reduce the number of qpzone_ref() and qpzone_unref() calls in
qpzone_detachnode() by relying on the call_rcu to delay
the destruction of the lock buckets.
Instead of having many node_lock_count * sizeof(<member>) arrays, pack
all the members into a qpzone_bucket_t that is cacheline aligned and have
a single array of those.
Instead of having many node_lock_count * sizeof(<member>) arrays, pack
all the members into a qpcache_bucket_t struct that is cacheline aligned
and have a single array of those.
Additionaly, make both the head and the tail of isc_queue_t padded, not
just the head, to prevent false sharing of the lock-free structure with
the lock that follows it.
When query logging is enabled, named will now include the destination
address port in the logged message.
Example messages for before and after this change:
before: client @0x7608b2026000 10.53.0.1#52136 (example.test): query: example.test IN A +E(0)K (10.53.0.1)
after: client @0x729bf5c26000 10.53.0.1#35976 (example.test): query: example.test IN A +E(0)K (10.53.0.1#53)
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
The original .ttl field was actually used as TTL in the dns_qpzone unit.
Restore the field by adding it to union with the .expire struct member
and cleanup all the code that added or subtracted 'now' from the ttl
field as that was misleading as 'now' would be always 0 for qpzone
database.
The find_coveringnsec() was getting the 'now' from two sources -
search->now and separate now argument. Things like this are ticking
bombs, remove the extra 'now' argument and use single source of 'now'.
When the mark_ancient() helper function was introduced, couple of places
with duplicate (or almost duplicate) code was missed. Move the
mark_ancient() function closer to the top of the file, and correctly use
it in places that mark the header as ANCIENT.
If we know that the header has ZEROTTL set, the server should never send
stale records for it and the TTL should never be anything else than 0.
The comment was already there, but the code was not matching the
comment.
The old name was misleading as it never meant time-to-live, e.g. number
of seconds from now when the header should expire. The true meaning was
an expiration time e.g. now + ttl. This was the original design bug
that caused the slip when we assigned header->ttl to rdataset->ttl.
Because the name was matching, nobody has questioned the correctness of
the code both during the MR review and during the numerous re-reviews
when we were searching for the cause of the 54 year TTL.
When the header has been marked as ANCIENT, but the ttl hasn't been
reset (this happens in couple of places), the rdataset TTL would be
set to the header timestamp instead to a reasonable TTL value.
Since this header has been already expired (ANCIENT is set), set the
rdataset TTL to 0 and don't reuse this field to print the expiration
time when dumping the cache. Instead of printing the time, we now
just print 'expired (awaiting cleanup'.
When there are parent and child zones on the same server, the DNSKEY
lookup was failing as the pending record we are validating is needed
to fetch the DNSKEY records. This change allows that to happen.
The caller is already setting STARTATZONE when the name being looked
up is a subdomain of the current domain.
The address lookups from ADB were not being validated, allowing
spoofed responses to be accepted and used for other lookups.
Validate the answers except when CD=1 is set in the triggering
request. Separate ADB names looked up with CD=1 from those without
CD=1, to prevent the use of unvalidated answers in the normal lookup
case (CD=0). Set the TTL on unvalidated (pending) responses to
ADB_CACHE_MINIMUM when adding them to the ADB.
the search for the deepest known zone cut in the cache could
improperly reject a node containing stale data, even if the
NS rdataset wasn't the data that was stale.
this change also improves the efficiency of the search by
stopping it when both NS and RRSIG(NS) have been found.
Change the names of the node reference counting functions
and add comments to make the mechanism easier to understand:
- newref() and decref() are now called qpcnode_acquire()/
qpznode_acquire() and qpcnode_release()/qpznode_release()
respectively; this reflects the fact that they modify both
the internal and external reference counters for a node.
- qpcnode_newref() and qpznode_newref() are now called
qpcnode_erefs_increment() and qpznode_erefs_increment(), and
qpcnode_decref() and qpznode_decref() are now called
qpcnode_erefs_decrement() and qpznode_erefs_decrement(),
to reflect that they only increase and decrease the node's
external reference counters, not internal.
This removes the db_nodelock_t structure and changes the node_locks
array to be composed only of isc_rwlock_t pointers. The .reference
member has been moved to qpdb->references in addition to
common.references that's external to dns_db API users. The .exiting
members has been completely removed as it has no use when the reference
counting is used correctly.
The origin_node in qpcache was always NULL, so we can remove the
getoriginode() function and origin_node pointer as the
dns_db_getoriginnode() correctly returns ISC_R_NOTFOUND when the
function is not implemented.
Cleanup the pattern in the decref() functions in both qpcache.c and
qpzone.c, so it follows the similar patter as we already have in
newref() function.
In order to avoid to loop to find the next position to store an EDE in
a dns_edectx_t, add a "nextede" state which holds the next available
position.
Also, in order ot avoid to loop to find if an EDE is already existing in
a dns_edectx_t, and avoid a duplicate, use a bitmap to immediately know
if the EDE is there or not.
Those both changes applies for adding or copying EDE.
Also make the direction of dns_ede_copy more explicit/avoid errors by
making "edectx_from" a const pointer.
Migrate tests cases in client_test code which were exclusively testing
code which is now all wrapped inside ede compilation unit. Those are
testing maximum number of EDE, duplicate EDE as well as truncation of
text of an EDE.
Also add coverage for the copy of EDE from an edectx to another one, as
well as checking the assertion of the maximum EDE info code which can be
used.
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
When an EDE code is added to a message, the code is converted early in a
big-endian order so it can be memcpy-ed directly in the EDE buffer that
will go on the wire.
This previous change forget to update debug logs which still assume the
EDE code was in host byte order. Add a separate variable to
differentiate both and avoid ambiguities
Extended DNS error 22 (No reachable authority) was previously detected
when `fctx_expired` fired. It turns out this function is used as a
"safety net" and the timeout detection should be caught earlier.
It was working though, because of another issue fixed by !9927. Since
this change, the recursive request timed out detection occurs before
`fctx_expired` so EDE 22 is not added to the response message anymore.
The fix of the problem is to add the EDE 22 code in two situations:
- When the dispatch code timed out (rctx_timedout) the resolver code
checks various properties to figure out if it needs to make another
fetch attempt. One of the paramters if the fetch expiration time. If
it expires, the whole recursion is canceled, so it now adds the EDE 22
code.
- If the fetch expiration time doesn't expires in the case above (and
other parameters allows it) a new fetch attempt is made (fctx_query).
But before the new request is actually made, the fetch expiration time
is re-checked. It might then has elapsed, and the whole recursion is
canceled. So it now also adds the EDE 22 code here as well.
Add support for EDE codes 1 (Unsupported DNSKEY Algorithm) and 2
(Unsupported DS Digest Type) which might occurs during DNSSEC
validation in case of unsupported DNSKEY algorithm or DS digest type.
Because DNSSEC internally kicks off various fetches, we need to copy
all encountered extended errors from fetch responses to the fetch
context. Upon an event, the errors from the fetch context are copied
to the client response.
ISCCC_R_SYNTAX, ISCCC_R_EXPIRED, and ISCCC_R_CLOCKSKEW have the
same usage and text formats as DNS_R_SYNTAX, DNS_R_EXPIRED and
DNS_R_CLOCKSCREW respectively. this was originally done because
result codes were defined in separate libraries, and some tool
might be linked with libisccc but not libdns. as the result codes
are now defined in only one place, there's no need to retain the
duplicates.
the isc_mem allocation functions can no longer fail; as a result,
ISC_R_NOMEMORY is now rarely used: only when an external library
such as libjson-c or libfstrm could return NULL. (even in
these cases, arguably we should assert rather than returning
ISC_R_NOMEMORY.)
code and comments that mentioned ISC_R_NOMEMORY have been
cleaned up, and the following functions have been changed to
type void, since (in most cases) the only value they could
return was ISC_R_SUCCESS:
- dns_dns64_create()
- dns_dyndb_create()
- dns_ipkeylist_resize()
- dns_kasp_create()
- dns_kasp_key_create()
- dns_keystore_create()
- dns_order_create()
- dns_order_add()
- dns_peerlist_new()
- dns_tkeyctx_create()
- dns_view_create()
- dns_zone_setorigin()
- dns_zone_setfile()
- dns_zone_setstream()
- dns_zone_getdbtype()
- dns_zone_setjournal()
- dns_zone_setkeydirectory()
- isc_lex_openstream()
- isc_portset_create()
- isc_symtab_create()
(the exception is dns_view_create(), which could have returned
other error codes in the event of a crypto library failure when
calling isc_file_sanitize(), but that should be a RUNTIME_CHECK
anyway.)
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
Extended DNS error mechanism (EDE) enables to have several EDE raised
during a DNS resolution (typically, a DNSSEC query will do multiple
fetches which each of them can have an error). Add support to up to 3
EDE errors in an DNS response. If duplicates occur (two EDEs with the
same code, the extra text is not compared), only the first one will be
part of the DNS answer.
Because the maximum number of EDE is statically fixed, `ns_client_t`
object own a static vector of `DNS_DE_MAX_ERRORS` (instead of a linked
list, for instance). The array can be fully filled (all slots point to
an allocated `dns_ednsopt_t` object) or partially filled (or
empty). In such case, the first NULL slot means there is no more EDE
objects.
When TCP is used, 'fctx_query()' adds one second to the rtt
(round-trip time) value, but there's a bug when the decision
about using TCP is made already after the calculation. Move the
block of the code which looks up the peers list to decide
whether to use TCP into a place that's before the rtt calculation
is performed. This commit doesn't add or remove any code, it just
moves the code and adds a comment block.
When 'ISC_R_TIMEDOUT' is received in 'tcp_recv()', it times out the
oldest response in the active responses queue, and only after that it
checks whether other active responses have also timed out. So when
setting a timeout value for a read operation after a successful
connection, it makes sense to take the timeout value from the oldest
response in the active queue too, because, theoretically, the responses
can have different timeout values, e.g. when the TCP dispatch is shared.
Currently 'resp' is always NULL. Previously when connect and read
timeouts were not separated in dispatch this affected only logging, but
now since we are setting a new timeout after a successful connection,
we need to choose a suitable response from the active queue.
Previously, this function always acquires a node write lock if it
might need node cleanup in case the reference decrements to 0. In
fact, the lock is unnecessary if the reference is larger than 1 and it
can be optimized as an "easy" case. This optimization could even be
"necessary". In some extreme cases, many worker threads could repeat
acquring and releasing the reference on the same node, resulting in
severe lock contention for nothing (as the ref wouldn't decrement to 0
in most cases). This change would prevent noticeable performance
drop like query timeout for such cases.
Co-authored-by: JINMEI Tatuya <jtatuya@infoblox.com>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Currently, the fetch context will continue running even when the last
fetch (response) has been removed from the context, so named can process
and cache the answer. This can lead to a situation where the number of
outgoing recursing clients exceeds the the configured number for
recursive-clients.
Be more stringent about the recursive-clients limit and shutdown the
fetch context immediately after the last fetch has been canceled from
that particular fetch context.
Address Database (ADB) shares the memory for the short lived ADB
objects (finds, fetches, addrinfo) and the long lived ADB
objects (names, entries, namehooks). This could lead to a situation
where the resolver-heavy load would force evict ADB objects from the
database to point where ADB is completely empty, leading to even more
resolver-heavy load.
Make the short lived ADB objects use the other memory context that we
already created for the hashmaps. This makes the ADB overmem condition
to not be triggered by the ongoing resolver fetches.
In some places there was a limitation of the maximum timeout
value of INT16_MAX, which is only about 32 seconds. Refactor
the code to remove the limitation.
The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
struct fetchctx does have a list of pending validators as well as a
pointer to the HEAD validator. Remove the validator pointer to avoid
confusion, as there is no perticular reasons to have it directly
accessible outside of the list.
We started using isc_nm_bad_request() more actively throughout
codebase. In the case of HTTP/2 it can lead to a large count of
useless "Bad Request" messages in the BIND log, as often we attempt to
send such request over effectively finished HTTP/2 sessions.
This commit fixes that.
A call to isc_nm_read_stop() would always stop reading timer even in
manual timer control mode which was added with StreamDNS in mind. That
looks like an omission that happened due to how timers are controlled
in StreamDNS where we always stop the timer before pausing reading
anyway (see streamdns_on_complete_dnsmessage()). That would not work
well for HTTP, though, where we might want pause reading without
stopping the timer in the case we want to split incoming data into
multiple chunks to be processed independently.
I suppose that it happened due to NM refactoring in the middle of
StreamDNS development (at the time isc_nm_cancelread() and
isc_nm_pauseread() were removed), as the StreamDNS code seems to be
written as if timers are not stoping during a call to
isc_nm_read_stop().
This commit introduces manual read timer control as used by StreamDNS
and its underlying transports. Before that, DoH code would rely on the
timer control provided by TCP, which would reset the timer any time
some data arrived. Now, the timer is restarted only when a full DNS
message is processed in line with other DNS transports.
That change is required because we should not stop the timer when
reading from the network is paused due to throttling. We need a way to
drop timed-out clients, particularly those who refuse to read the data
we send.
This commit adds logic to make code better protected against clients
that send valid HTTP/2 data that is useless from a DNS server
perspective.
Firstly, it adds logic that protects against clients who send too
little useful (=DNS) data. We achieve that by adding a check that
eventually detects such clients with a nonfavorable useful to
processed data ratio after the initial grace period. The grace period
is limited to processing 128 KiB of data, which should be enough for
sending the largest possible DNS message in a GET request and then
some. This is the main safety belt that would detect even flooding
clients that initially behave well in order to fool the checks server.
Secondly, in addition to the above, we introduce additional checks to
detect outright misbehaving clients earlier:
The code will treat clients that open too many streams (50) without
sending any data for processing as flooding ones; The clients that
managed to send 1.5 KiB of data without opening a single stream or
submitting at least some DNS data will be treated as flooding ones.
Of course, the behaviour described above is nothing else but
heuristical checks, so they can never be perfect. At the same time,
they should be reasonable enough not to drop any valid clients,
realatively easy to implement, and have negligible computational
overhead.
Initially, our DNS-over-HTTP(S) implementation would try to process as
much incoming data from the network as possible. However, that might
be undesirable as we might create too many streams (each effectively
backed by a ns_client_t object). That is too forgiving as it might
overwhelm the server and trash its memory allocator, causing high CPU
and memory usage.
Instead of doing that, we resort to processing incoming data using a
chunk-by-chunk processing strategy. That is, we split data into small
chunks (currently 256 bytes) and process each of them
asynchronously. However, we can process more than one chunk at
once (up to 4 currently), given that the number of HTTP/2 streams has
not increased while processing a chunk.
That alone is not enough, though. In addition to the above, we should
limit the number of active streams: these streams for which we have
received a request and started processing it (the ones for which a
read callback was called), as it is perfectly fine to have more opened
streams than active ones. In the case we have reached or surpassed the
limit of active streams, we stop reading AND processing the data from
the remote peer. The number of active streams is effectively decreased
only when responses associated with the active streams are sent to the
remote peer.
Overall, this strategy is very similar to the one used for other
stream-based DNS transports like TCP and TLS.
Limit the number of records appended to ADDITIONAL section to the names
that have less than 14 records in the RDATA. This limits the number
of the lookups into the database(s) during single client query.
Also don't append any additional data to ANY queries. The answer to ANY
is already big enough.
All the database implementations share the same names for the methods
implementing the database. That has some advantages like knowing what
to expect, but it turns out that any time such method shows up in any
kind of tracing - be it perf record, backtrace or anything else that
uses symbol names, it is very hard to distinguish whether the find()
belongs to qpcache, qpzone, builtin or sdlz implementation.
Make at least the names for qpzone and qpcache unique.
there was a database bug in which dns_db_find() could get a partial
match for the query name, but still set foundname to match the full
query name. this triggered an assertion when query_addwildcardproof()
assumed that foundname would be shorter.
the database bug has been fixed, but in case it happens again, we
can just copy the name instead of splitting it. we will also log a
warning that the closest-encloser name was invalid.
when adding a new NSEC3 record, dns_nsec3_addnsec3() uses a
dbiterator to seek to the newly created node and then find its
predecessor. dbiterators in the qpzone use snapshots, so changes
to the database are not reflected in an already-existing iterator.
consequently, when we add a new node, we have to create a new iterator
before we can seek to it.
when a requested name is found in the QP trie during a lookup, but its
records have been marked as nonexistent by a previous deletion, then
it's treated as a partial match, but the foundname could be left
pointing to the original qname rather than the parent. this could
lead to an assertion failure in query_findclosestnsec3().
The code in zone_startload() disables RPZ and CATZ for a zone if
dns_master_loadfile() returns anything other than ISC_R_SUCCESS,
which makes sense, but it's an error because zone_startload() can
also return DNS_R_SEENINCLUDE upon success when the zone had an
$INCLUDE statement.
Ensure the log prefixes passed to the dns_message_logpacketfrom()
function by its callers do not include the word "from" as the latter is
now emitted by the logfmtpacket() helper function.
Ensure the log prefixes passed to the dns_message_logpacketfromto()
function by its callers do not include the words "from" or "to" as those
are now emitted by the logfmtpacket() helper function.
Move dns_dispentry_getlocaladdress() calls around so that they are not
only invoked when dnstap support is compiled in. This function calls
isc_nmhandle_localaddr(), which may issue a system call, but only if the
ISC_SOCKET_DETAILS preprocessor macro is set at compile time.
Pass the value extracted by dns_dispentry_getlocaladdress() to
dns_message_logpacketfromto() so that it gets logged, adding useful
information to the relevant debug messages.
Since dns_message_logpacket() only takes a single socket address as a
parameter (and it is always the sending socket's address), rename it to
dns_message_logpacketfrom() so that its name better conveys its purpose
and so that the difference in purpose between this function and
dns_message_logpacketfromto() becomes more apparent.
Since dns_message_logfmtpacket() needs to be provided with both "from"
and "to" socket addresses, rename it to dns_message_logpacketfromto() so
that its name better conveys its purpose. Clean up the code comments
for that function.
Change the function prototype for dns_message_logfmtpacket() so that it
takes two isc_sockaddr_t parameters: one for the sending side and
another one for the receiving side. This enables debug messages to be
more precise.
Also adjust the function prototype for logfmtpacket() accordingly.
Unlike dns_message_logfmtpacket(), this function must not require both
'from' and 'to' parameters to be non-NULL as it is still going to be
used by dns_message_logpacket(), which only provides a single socket
address. Adjust its log format to handle both of these cases properly.
Adjust both dns_message_logfmtpacket() call sites accordingly, without
actually providing the second socket address yet. (This causes the
revised REQUIRE() assertion in dns_message_logfmtpacket() to fail; the
issue will be addressed in a separate commit.)
Both existing callers of the dns_message_logfmtpacket() function set the
argument passed as 'style' to &dns_master_style_comment. To simplify
these call sites, drop the 'style' parameter from the prototype for
dns_message_logfmtpacket() and use a fixed value of
&dns_master_style_comment in the function's body instead.
All callers of the logfmtpacket() helper function require the argument
passed as 'address' to be non-NULL. Meanwhile, the 'newline' and
'space' local variables in logfmtpacket() are only set to values
different than their initial values if the 'address' parameter is NULL.
Replace the 'newline' and 'space' local variables in logfmtpacket() with
fixed strings to improve code readability.
Extracting the exact address that each wildcard/TCP socket is bound to
locally requires issuing the getsockname() system call, which libuv
exposes via its uv_*_getsockname() functions. This is only required for
detailed logging and comes at a noticeable performance cost, so it
should not happen by default. However, it is useful for debugging
certain problems (e.g. cryptic system test failures), so a convenient
way of enabling that behavior should exist.
Update isc_nmhandle_localaddr() so that it calls uv_*_getsockname() when
the ISC_SOCKET_DETAILS preprocessor macro is set at compile time.
Ensure proper handling of sockets that wrap other sockets.
Set the new ISC_SOCKET_DETAILS macro by default when --enable-developer
is passed to ./configure. This enables detailed logging in the system
tests run in GitLab CI without affecting performance in non-development
BIND 9 builds.
Note that setting the ISC_SOCKET_DETAILS preprocessor macro at compile
time enables all callers of isc_nmhandle_localaddr() to extract the
exact address of a given local socket, which results e.g. in dnstap
captures containing more accurate information.
Mention the new preprocessor macro in the section of the ARM that
discusses why exact socket addresses may not be logged by default.
The dns_dispatch_gettcp() function is used for finding an existing TCP
connection that can be reused for sending a query from a specified local
address to a specified remote address. The logic for matching the
provided <local address, remote address> tuple to one of the existing
TCP connections is implemented in the dispatch_match() function:
- if the examined TCP connection already has a libuv handle assigned,
it means the connection has already been established; therefore,
compare the provided <local address, remote address> tuple against
the corresponding address tuple for the libuv handle associated with
the connection,
- if the examined TCP connection does not yet have a libuv handle
assigned, it means the connection has not yet been established;
therefore, compare the provided <local address, remote address>
tuple against the corresponding address tuple that the TCP
connection was originally created for.
This logic limits TCP connection reuse potential as the libuv handle
assigned to an existing dispatch object may have a more specific local
<address, port> tuple associated with it than the local <address, port>
tuple that the dispatch object was originally created for. That's
because the local address for outgoing connections can be set to a
wildcard <address, port> tuple (indicating that the caller does not care
what source <address, port> tuple will be used for establishing the
connection, thereby delegating the task of picking it to the operating
system) and then get "upgraded" to a specific <address, port> tuple when
the socket is bound (and a libuv handle gets associated with it). When
another dns_dispatch_gettcp() caller then tries to look for an existing
TCP connection to the same peer and passes a wildcard address in the
local part of the tuple, the function will not match that request to a
previously-established TCP connection (unless isc_nmhandle_localaddr()
returns a wildcard address as well).
Simplify dispatch_match() so that the libuv handle associated with an
existing dispatch object is not examined for the purpose of matching it
to the provided <local address, remote address> tuple; instead, always
examine the <local address, remote address> tuple that the dispatch
object was originally created for. This enables reuse of TCP
connections created without providing a specific local socket address
while still preventing other connections (created for a specific local
socket address) from being inadvertently shared.
This commit ensures that BIND enables TLS SNI support for outgoing DoT
connections (when possible) in order to improve compatibility with
other DNS server software.
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
Previously, we had an ISC_CONSTEXPR macro that was expanded to either
`constexpr` or `static const`, depending on compiler support. To make
the code cleaner, move `constexpr` support detection to Autoconf; if
`constexpr` support is missing from the compiler, define `constexpr` as
`static const` in config.h.
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
This is a second attempt to rewrite the GLUE cache to not use per
database version hash table. Instead of keeping a hash table indexed by
the node, use a directly linked list of GLUE records for each
slabheader. This was attempted before, but there was a data race caused
by the fact that the thread cleaning the GLUE records could be slower
than accessing the slab headers again and reinitializing the wait-free
stack.
The improved design builds on the previous design, but adds a new
dns_gluelist structure that has a pointer to the database version.
If a dns_gluelist belonging to a different (old) version is detected, it
is just detached from the slabheader and left for the closeversion() to
clean it up later.
The 'remote-servers' named.conf reference conflicts with the standard
term from the glossary. Rename the standard term to server-list to
make the docs build.
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
this commit removes the deprecated "sortlist" option. the option
is now marked as ancient; it is a fatal error to use it in
named.conf.
the sortlist system test has been removed, and other tests that
referenced the option have been modified.
the enabling functions, dns_message_setsortorder() and
dns_rdataset_towiresorted(), have also been removed.
named-checkzone will now, as part of the zone's integrity checks,
look to see if there are A or AAAA records being served and if so
check that the nameservers have A or AAAA records respectively.
These are a sometimes overlooked checks that, if not met, can mean
that a service that is supposed to reachable over IPv6 will not be
resolvable when the recursive resolver is IPv6 only. Similarly for
IPv4 servers when there are IPv4 only resolvers.
- remove obsolete DNS_LOGMODULE_RBT and DNS_LOGMODULE_RBTDB
- correct the misuse of the wrong log modules in dns/rpz.c and
dns/catz.c, and add DNS_LOGMODULE_RPZ and DNS_LOGMODULE_CATZ
to support them.
`shutdown_trigger_close_cb` is not called in the main loop since
queued events in the `loop->async_trigger`, including loop teardown
(shutdown_server) are processed first, before the `uv_close` callback
is executed..
In order to pass the information to the queued events, it is necessary
to set the flag earlier in the process and not wait for the `uv_close`
callback to trigger.
Search directive from resolv.conf had a maximum of 8 domains. Any
more were ignored. Do not ignore them anymore; iterate over any
number of domains.
Test resolv.conf support by checking the first and last domain in
the search list. Ignore the domains between; just ensure that the
last domain in the configuration is the last domain parsed.
Only call eatline() to skip to the next line if we're not
already at the end of a line when parsing an unknown directive.
We were accidentally skipping the next line when there was only
a single unknown directive on the current line.
The DNS_R_MUSTBESECURE lost its meaning with removal of
dnssec-must-be-secure option, so replace the few remaining (and a bit
confusing) use of this result code with DNS_R_NOVALIDSIG.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
Commit af7db89513 as part of #4141 was
supposed to apply the 'max-recursion-queries' quota to validator
queries, but the counter was never actually passed on to
dns_resolver_createfetch(). This has been fixed, and the global query
counter ('max-query-count', per client request) is now also added.
Upstream code doesn't do regular releases, so we need to regularly
sync the code from the upstream repository. This is synchronization up
to the commit f8d0513 from Jan 29, 2024.
While implementing the global limit 'max-query-count', initially I
thought adding the variable to the resolver structure. But the limit
is per client request so it was moved to the view structure (and
counter in ns_query structure). However, I forgot to remove the
variable from the resolver structure again. This commit fixes that.
The root cause is the fix for CVE-2024-0760 (part 3), which resets
the TCP connection on a failed send. Specifically commit
4b7c61381f stops reading on the socket
because the TCP connection is throttling.
When the tcpdns_send_cb callback thinks about restarting reading
on the socket, this fails because the socket is a client socket.
And nsupdate is a client and is using the same netmgr code.
This commit removes the requirement that the socket must be a server
socket, allowing reading on the socket again after being throttled.
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
Previously, the update policy rules check was moved earlier in the
sequence, and the keep rule match pointers were kept to maintain the
ability to verify maximum records by type.
However, these pointers can become invalid if server reloading
or reconfiguration occurs before update completion. To prevent
this issue, extract the maximum records by type value immediately
during processing and only keep the copy of the values instead of the
full ssurule.
the generated grammar for named.conf clauses that may or may not be
enabled at compile time will now print the same comment regardless of
whether or not they are.
previously, the grammar didn't print a comment if an option was enabled,
but printed "not configured" if it was disabled. now, in both cases,
it will say "optional (only available if configured)".
as an incidental fix, clarified the documentation for "named-checkconf -n".
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
The code that listens on individual interfaces is now stable and doesn't
require any changes. The code that would bind to IPv6 wildcard address
and then use IPv6 pktinfo structure to get the source address is not
going to be completed, so it's better to just remove the dead cruft.
In 2024, it is reasonable to assume that IPv4 and IPv6 is always
available on a socket() level. We still keep the option to enable or
disable each IP version individually, as the routing might be broken or
undesirable for one of the versions.
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
The libisc now includes sizeable chunks of cryptography, but the crypto
log module was missing. Add the new ISC_LOGMODULE_CRYPTO to libisc and
use it in the isc_tls error logging.
This change adds a "none" parameter to the query-source[-v6]
options in named.conf, which forbid the usage of IPv4 or IPv6
addresses when doing upstream queries.
DNS_LOGMODULE_RBTDB was simply inappropriate, and this
log message is actually dependent on db implementation
details, so DNS_LOGMODULE_DB would be the best choice.
The new log message is emitted when adding or updating an RRset
fails due to exceeding the max-records-per-type limit. The log includes
the owner name and type, corresponding zone name, and the limit value.
It will be emitted on loading a zone file, inbound zone transfer
(both AXFR and IXFR), handling a DDNS update, or updating a cache DB.
It's especially helpful in the case of zone transfer, since the
secondary side doesn't have direct access to the offending zone data.
It could also be used for max-types-per-name, but this change
doesn't implement it yet as it's much less likely to happen
in practice.
The 'dns' variable in dohpath can be in various forms ({?dns},
{dns}, {&dns} etc.). To check for a valid dohpath it ends up
being simpler to just parse the URI template rather than looking
for all the various forms if substring.
Add query counters for DoT, DoH, unencrypted DoH and their proxied
counterparts. The protocols don't increment TCP/UDP counters anymore
since they aren't the same as plain DNS-over-53.
The usage of port and tls arguments in *-source and *-source-v6 named
configuration options has been previously removed. Remove
configuration check deprecating usage of those arguments.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
When canceling the ADB find, the lock on the find gets released for
a brief period of time to be locked again inside adbname lock. During
the brief period that the ADB find is unlocked, it can get canceled by
other means removing it from the adbname list which in turn causes
assertion failure due to a double removal from the adbname list.
Recheck if the find->adbname is still valid after acquiring the lock
again and if not just skip the double removal. Additionally, attach to
the adbname as in the worst case, the adbname might also cease to exist
if the scheduler would block this particular thread for a longer period
of time invalidating the lock we are going to acquire and release.
QPDB is now a default implementation for both cache and zone. Remove
the venerable RBTDB database implementation, so we can fast-track the
changes to the database without having to implement the design changes
to both QPDB and RBTDB and this allows us to be more aggressive when
refactoring the database design.
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
Originally, the dns_dbversion_t was typedef'ed to void type. This
allowed some flexibility, but using (void *) just removes any
type-checking that C might have. Instead of using:
typedef void dns_dbversion_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbversion dns_dbversion_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbversion_t type.
Originally, the dns_dbnode_t was typedef'ed to void type. This allowed
some flexibility, but using (void *) just removes any type-checking that
C might have. Instead of using:
typedef void dns_dbnode_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbnode dns_dbnode_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbnode_t type.
The query-source option has the slight quirk of allowing the address to
be specified in two ways, either as every other source option, or as an
"address" key-value pair.
For this reason, it had a separate parsing function from other X-source
options, but it is possible to extend the parsing of other X-sources to
be generic and also handle query-source.
This commit just does that.
The isc/crypto.h now directly includes the OpenSSL headers (evp.h) and
any application that includes that header also needs to have
OPENSSL_CFLAGS in the Makefile.am. Adjust the required automake files
as needed.
Add an option to dnssec-ksr keygen, -o, to create KSKs instead of ZSKs.
This way, we can create a set of KSKS for a given period too.
For KSKs we also need to set timing metadata, including "SyncPublish"
and "SyncDelete". This functionality already exists in keymgr.c so
let's make the function accessible.
Replace dnssec-keygen calls with dnssec-ksr keygen for KSK in the
ksr system test and check keys for created KSKs as well. This requires
a slight modification of the check_keys function to take into account
KSK timings and metadata.
some EDNS option names, including DAU, DHU, N3U, and CHAIN,
were not printed in dns_message_pseudosectiontotext() or
_psuedosectiontoyaml(); they were displayed as unknown options.
this has been corrected.
that code was also refactored to use switch instead of if/else,
and to look up the option code names in a table to prevent
inconsistencies between the two formats. one such inconsistency
was corrected: the "TCP-KEEPALIVE" option is now always printed
with a hyphen, instead of being "TCP KEEPALIVE" when not using
YAML. the keepalive system test has been updated to expect this.
EDNS options that print DNS names (i.e., CHAIN and Report-Channel)
now enclose them in quotation marks to ensure YAML correctness.
the auth system test has been updated to expect this when grepping
for Report-Channel options.
Dispatch needs to know the transport that is being used over the
TCP connection to correctly allow for it to be reused. Add a
transport parameter to dns_dispatch_createtcp and dns_dispatch_gettcp
and use it when selecting a TCP socket for reuse.
RFC 9567 section 8.1 specifies that the agent domain cannot
be a subdomain of the domain it is reporting on. therefore,
in addition to making it illegal to configure that at the
zone level, we also need to disable send-report-channel for
any zone for which the global send-report-channel value is
a subdomain.
we also now warn if send-report-channel is configured
globally to a zone that we host, but that zone doesn't
have log-report-channel set.
the logging of error-report queries is no longer activated by
the view's "send-report-channel" option; that now only configures
the agent-domain value that is to be sent in authoritative
responses. the warning that was logged when "send-agent-domain"
was set to a value that is not a locally configured zone has
been removed.
error-report logging is now activated by the presence of an
authoritative zone with the "log-report-channel" option set to
"yes". this is not permitted in the root zone.
NOTE: a zone with "log-report-channel yes;" should contain a
"*._er" wildcard, but that requirement is not yet enforced.
add a boolean "log-report-channel" option for primary and
secondary zones, which sets the DNS_ZONEOPT_LOGREPORTS zone
flag. this option is not yet functional.
If send-report-channel is set at the zone level, it will
be stored in the zone object and used instead of the
view-level agent-domain when constructing the EDNS
Report-Channel option.
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
These are logged to the update category at debug level 99 and
have the following form.
update-policy: using: signer=ddns-key.example.nil, name=updated.example.nil, addr=10.53.0.1, tcp=0, type=A, target=
update-policy: trying: grant zonesub-key.example.nil zonesub TXT
update-policy: next rule: signer does not match identity
update-policy: trying: grant ddns-key.example.nil zonesub ANY
update-policy: matched: grant ddns-key.example.nil zonesub ANY
or
update-policy: using: signer=restricted.example.nil, name=example.nil, addr=10.53.0.1, tcp=0, type=TXT, target=
update-policy: trying: grant zonesub-key.example.nil zonesub TXT
update-policy: next rule: signer does not match identity
update-policy: trying: grant ddns-key.example.nil zonesub ANY
update-policy: next rule: signer does not match identity
update-policy: trying: grant restricted.example.nil zonesub ANY
update-policy: next rule: name/subdomain mismatch
update-policy: no match found
where 'using:' is the calling parameters of dns_ssutable_checkrules,
'trying:' in the rule bing evaluated, "next rule:" is the reason
the rule does not match, "matched:" repeats the matched rule, and
no match found is reported when te set of rules is exhausted.
When DSCP was removed the parsing of hostnames was accidentally
broken resulting in an assertion failure. Call cfg_parse_tuple
rather than using custom code in parse_sockaddrnameport.
Unify libcrypto initialization and explicit digest fetching in a single
place and move relevant code to the isc__crypto namespace instead of
isc__tls.
It will remove the remaining implicit fetching and deduplicate explicit
fetching inside the codebase.
The <openssl/hmac.h> header was unused and including the
header might cause build failure when OpenSSL doesn't have
Engines support enabled.
See https://fedoraproject.org/wiki/Changes/OpensslDeprecateEngine
Removes unused hmac includes after Remove OpenSSL Engine support
(commit ef7aba7072) removed engine
support.
maxlabels is the suffix length that corresponds to the latest
NXDOMAIN response. minlabels is the suffix length that corresponds
to longest found existing name.
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
Rename check_recursionquota() to acquire_recursionquota(), and
implement a new function called release_recursionquota() to
reverse the action. It helps with decreasing code duplication.
In two places, after linking the client to the manager's
"recursing-clients" list using the check_recursionquota()
function, the query.c module fails to unlink it on error
paths. Fix the bugs by unlinking the client from the list.
Also make sure that unlinking happens before detaching the
client's handle, as it is the logically correct order, e.g.
in case if it's the last handle and ns__client_reset_cb()
can be called because of the detachment.
The dns_zone_getxfrintime() function fails to lock the zone before
accessing its 'xfrintime' structure member, which can cause a data
race between soa_query() and the statistics channel. Add the missing
locking/unlocking pair, like it's done in numerous other similar
functions.
The 'nodetach' member is a leftover from the times when non-zero
'stale-answer-client-timeout' values were supported, and currently
is always 'false'. Clean up the member and its usage.
Currently, the outgoing UDP sockets have enabled
SO_REUSEADDR (SO_REUSEPORT on BSDs) which allows multiple UDP sockets to
bind to the same address+port. There's one caveat though - only a
single (the last one) socket is going to receive all the incoming
traffic. This in turn could lead to incoming DNS message matching to
invalid dns_dispatch and getting dropped.
Disable setting the SO_REUSEADDR on the outgoing UDP sockets. This
needs to be done explicitly because `uv_udp_open()` silently enables the
option on the socket.
When matching the TCP dispatch responses, we should skip the responses
that do not belong to our TCP connection. This can happen with faulty
upstream server that sends invalid QID back to us.
The dns_dispatch_add() function registers the 'resp' entry in
'disp->mgr->qids' hash table with 'resp->port' being 0, but in
tcp_recv_success(), when looking up an entry in the hash table
after a successfully received data the port is used, so if the
local port was set (i.e. it was not 0) it fails to find the
entry and results in an unexpected error.
Set the 'resp->port' to the given local port value extracted from
'disp->local'.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
This commit nulls all type fields for the clausedef lists that are
declared ancient, and removes the corresponding cfg_type_t and parsing
functions when they are found to be unused after the change.
Static-stub address and addresses from other sources where being
mixed together resulting in static-stub queries going to addresses
not specified in the configuration or alternatively static-stub
addresses being used instead of the real addresses.
As the relaxed memory ordering doesn't ensure any memory
synchronization, it is possible that the increment will succeed even
in the case when it should not - there is a race between
atomic_fetch_sub(..., acq_rel) and atomic_fetch_add(..., relaxed).
Only the result is consistent, but the previous value for both calls
could be same when both calls are executed at the same time.
An exit path in the dns_dispatch_add() function fails to get out of
the RCU critical section when returning early. Add the missing
rcu_read_unlock() call.
This change uses uv_get_total_memory() to get the memory available to
BIND 9 with possible modification by uv_get_constrained_memory() if the
libuv version is recent enough to honour constraints created by
f.e. cgroups.
The OpenBSD doesn't have sysctlbyname(), but sysctl() can be used to
read the number of online/available CPUs by reading following MIB(s):
[CTL_HW, HW_NCPUONLINE] with fallback to [CTL_HW, HW_NCPU].
Cleanup various checks and cleanups that are available on the all
platforms like sysctlbyname() and various related <sys/*.h> headers
that are either defined in POSIX or available on Linux and all BSDs.
Instead of cooking up our own code for getting the number of available
CPUs for named to use, make use of uv_available_parallelism() from
libuv >= 1.44.0.
The dns_dispatch_add() call in the dns_xfrin unit had hardcoded 30
second limit. This meant that any incoming transfer would be stopped in
it didn't finish within 30 seconds limit. Additionally, dns_xfrin
callback was ignoring the return value from dns_dispatch_getnext() when
restarting the reading from the TCP stream; this could cause transfers
to get stuck waiting for a callback that would never come due to the
dns_dispatch having already been shut down.
Call the dns_dispatch_add() without a timeout and properly handle the
result code from the dns_dispatch_getnext().
The dns_dispatch_add() has timeout parameter that could not be 0 (for
not timeout). Modify the dns_dispatch implementation to accept a zero
timeout for cases where the timeouts are undesirable because they are
managed externally.
Query and response log shares the same flags. Move flags logging out of
log_query to share it with log_response. Use buffer instead of snprintf
to fill flags a bit faster.
Signed-off-by: Petr Menšík <pemensik@redhat.com>
Remove answer flag from log, log instead count of records for each
message section. Include EDNS version and few flags of response. Add
also status of result.
Still does not include body of responses rrset.
when the QP cache was adapted from the RBT database, some names
weren't changed. this could be confusing, so let's change them now.
also, we no longer need to include rbt.h.
DNSRPS was the API for a commercial implementation of Response-Policy
Zones that was supposedly better. However, it was never open-sourced
and has only ever been available from a single vendor. This goes against
the principle that the open-source edition of BIND 9 should contain only
features that are generally available and universal.
This commit removes the DNSRPS implementation from BIND 9. It may be
reinstated in the subscription edition if there's enough interest from
customers, but it would have to be rewritten as a plugin (hook) instead
of hard-wiring it again in so many places.
If the operating system UDP queue gets full and the outgoing UDP sending
starts to be delayed, BIND 9 could exhibit memory spikes as it tries to
enqueue all the outgoing UDP messages. As those are not going to be
delivered anyway (as we argued when we stopped enlarging the operating
system send and receive buffers), try to send the UDP messages directly
using `uv_udp_try_send()` and if that fails, drop the outgoing UDP
message.
We currently set SO_INCOMING_CPU incorrectly, and testing by Ondrej
shows that fixing the issue and setting affinities is worse than letting
the kernel schedule threads without constraints. So we should not set
SO_INCOMING_CPU anymore.
The 'all_spilled' local variable in resolver.c:fctx_getaddresses()
is 'true' by default, and only becomes false when there is at least
one successfully found NS address. However, when a 'forward only;'
configuration is used, the code jumps over the part where it looks
for NS addresses and doesn't reset the 'all_spilled' to false, which
results in incorretly increased 'serverquota' statistics variable,
and also in invalid return error code from the function. The result
code error didn't make any differences, because all codes other than
'ISC_R_SUCCESS' or 'DNS_R_WAIT' were treated in the same way, and
the result code was never logged anywhere.
Set the default value of 'all_spilled' to 'false', and only make it
'true' before actually starting to look up NS addresses.
Currently, the isc_work API is overloaded. It runs both the
CPU-intensive operations like DNSSEC validations and long-term tasks
like RPZ processing, CATZ processing, zone file loading/dumping and few
others.
Under specific circumstances, when many large zones are being loaded, or
RPZ zones processed, this stops the CPU-intensive tasks and the DNSSEC
validation is practically stopped until the long-running tasks are
finished.
As this is undesireable, this commit moves the CPU-intensive operations
from the isc_work API to the isc_helper API that only runs fast memory
cleanups now.
Add an extra thread that can be used to offload operations that would
affect latency, but are not long-running tasks; those are handled by
isc_work API.
Each isc_loop now has matching isc_helper thread that also built on top
of uv_loop. In fact, it matches most of the isc_loop functionality, but
only the `isc_helper_run()` asynchronous call is exposed.
When verifying a message in an offloaded thread there is a race with
the worker thread which writes to the same buffer. Clone the message
buffer before offloading.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
This change allows fallback from an IXFR failure to AXFR when the
reason is DNS_R_TOOMANYRECORDS. This is because this error condition
could be temporary only in an intermediate version of IXFR
transactions and it's possible that the latest version of the zone
doesn't have that condition. In such a case, the secondary would never
be able to update the zone (even if it could) without this fallback.
This fallback behavior is particularly useful with the recently
introduced max-records-per-type and max-types-per-name options:
the primary may not have these limitations and may temporarily
introduce "too many" records, breaking IXFR. If the primary side
subsequently deletes these records, this fallback will help recover
the zone transfer failure automatically; without it, the secondary
side would first need to increase the limit, which requires more
operational overhead and has its own adverse effect.
This change also fixes a minor glitch that DNS_R_TOOMANYRECORDS wasn't
logged in xfrin_fail.
The rcu_xchg_pointer() function can be used outside of a critical
section, and usually must be followed by a synchronize_rcu() or
call_rcu() call to detach from the resource, unless if there are
some guarantees in place because of our own reference counting.
named-checkconf now takes "-n" to ignore "not configured" errors.
This allows named-checkconf to check the syntax of configurations
from other builds which have support for more options.
If the ZSK has lifetime unlimited, the timing metadata "Inactive" and
"Delete" cannot be found and is treated as an error. Fix by allowing
these metadata to not exist.
When a validator is already shut down, val->name becomes NULL. We
need to process and keep the ISC_R_CANCELED or ISC_R_SHUTTINGDOWN
result code before calling validate_async_done(), otherwise, when it
is called with the hardcoded DNS_R_NOVALIDSIG result code, it can
cause an assetion failure when val->name (being NULL) is used in
proveunsecure().
Administrators may wish to constrain the set of cores that BIND 9 runs
on via the 'taskset', 'cpuset' or 'numactl' programs (or equivalent on
other O/S), for example to achieve higher (or more stable) performance
by more closely associating threads with individual NIC rx queues. If
the admin has used taskset, it follows that BIND ought to
automatically use the given number of CPUs rather than the system wide
count.
Co-Authored-By: Ray Bellis <ray@isc.org>
Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
fctx->state should be read with the lock held.
1559 /*
1560 * Caller must be holding the fctx lock.
1561 */
CID 468796: (#1 of 1): Data race condition (MISSING_LOCK)
1. missing_lock: Accessing fctx->state without holding lock fetchctx.lock.
Elsewhere, fetchctx.state is written to with fetchctx.lock held 2 out of 2 times.
1562 REQUIRE(fctx->state == fetchstate_done);
1563
1564 FCTXTRACE("sendevents");
1565
1566 LOCK(&fctx->lock);
1567
Give prefetches a free pass through the quota so that the cache
entries for popular zones could be updated successfully even if the
quota for is already reached.
Give prefetches a free pass through the quota so that the cache entry
for a popular zone could be updated successfully even if the quota for
it is already reached.
Although the nanual page of malloc_usable_size says:
Although the excess bytes can be over‐written by the application
without ill effects, this is not good programming practice: the
number of excess bytes in an allocation depends on the underlying
implementation.
it looks like the premise is broken with _FORTIFY_SOURCE=3 on newer
systems and it might return a value that causes program to stop with
"buffer overflow" detected from the _FORTIFY_SOURCE. As we do have own
implementation that tracks the allocation size that we can use to track
the allocation size, we can stop relying on this introspection function.
Also the newer manual page for malloc_usable_size changed the NOTES to:
The value returned by malloc_usable_size() may be greater than the
requested size of the allocation because of various internal
implementation details, none of which the programmer should rely on.
This function is intended to only be used for diagnostics and
statistics; writing to the excess memory without first calling
realloc(3) to resize the allocation is not supported. The returned
value is only valid at the time of the call.
Remove usage of both malloc_usable_size() and malloc_size() to be on the
safe size and only use the internal size tracking mechanism when
jemalloc is not available.
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
If there is an algorithm rollover and two keys of different algorithm
share the same keytags, then there is a possibility that if we check
that a key matches a specific state, we are checking against the wrong
key.
Fix this by not only checking for matching key id but also key
algorithm.
Some things we no longer want to do when we are in offline-ksk mode.
1. Don't check for inactive and private keys if the key is a KSK.
2. Don't update the TTL of DNSKEY, CDS and CDNSKEY RRset, these come
from the SKR.
With offline-ksk enabled, we don't run the keymgr because the key
timings are determined by the SKR. We do update the key states but
we derive them from the timing metadata.
Then, we can skip a other tasks in offline-ksk mode, like DS checking
at the parent and CDS synchronization, because the CDS and CDNSKEY
RRsets also come from the SKR.
This added source code stores SKR data. It is loosely based on:
https://www.iana.org/dnssec/archive/files/draft-icann-dnssec-keymgmt-01.txt
A SKR contains a list of signed DNSKEY RRsets. Each change in data
should be stored in a separate bundle. So if the RRSIG is refreshed that
means it is stored in the next bundle. Likewise, if there is a new ZSK
pre-published, it is in the next bundle.
In addition (not mentioned in the draft), each bundle may contain
signed CDS and CDNSKEY RRsets.
Each bundle has an inception time. These will determine when we need
to re-sign or re-key the zone.
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
There are few places where we attach/detach from the dns_xfrin object
while running on a different thread than the zone's assigned thread -
xfrin_xmlrender() in the statschannel and dns_zone_stopxfr() to name the
two places where it happens now. In the rare case, when the incoming
transfer completes (or shuts down) in the brief period between the other
thread attaches and detaches from the dns_xfrin, the isc_timer_destroy()
calls would be called by the last thread calling the xfrin_detach().
In the worst case, it would be this other thread causing assertion
failure. Move the isc_timer_destroy() call to xfrin_end() function
which is always called on the right thread and to match this move
isc_timer_create() to xfrin_start() - although this other change makes
no difference.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
The isc_log_write1() and isc_log_vwrite1() functions were meant to
de-duplicate the messages sent to the isc_log subsystem. However, they
were never used in an entire code base and the whole mechanism around it
was complicated and very inefficient. Just remove those, there are
better ways to deduplicate syslog messages inside syslog daemons now.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
Instead of juggling different logging context, use one single logging
context that gets initialized in the libisc constructor and destroyed in
the libisc destructor.
The application is still responsible for creating the logging
configuration before using the isc_log API.
This patch is first in the series in a way that it is transparent for
the users of the isc_log API as the isc_log_create() and
isc_log_destroy() are now thin shims that emulate the previous
functionality, but it isc_log_create() will always return internal
isc__lctx pointer and isc_log_destroy() will actually not destroy the
internal isc__lctx context.
Signed-off-by: Ondřej Surý <ondrej@isc.org>
Instead of directly using the result of dirfd() in the unlinkat() call,
check whether the returned file descriptor is actually valid. That
doesn't really change the logic as the unlinkat() would fail with
invalid descriptor anyway, but this is cleaner and will report the right
error returned directly by dirfd() instead of EBADF from unlinkat().
The clang-scan 19 has reported that we are ignoring errno after the call
to rewind(). As we don't really care about the result, just silence the
error, the whole code will be removed in the development version anyway
as it is not needed.
The contexpr introduced in C23 standard makes perfect sense to be used
instead of preprocessor macros - the symbols are kept, etc. Define
ISC_CONSTEXPR to be `constexpr` for C23 and `static const` for the older
C standards. Use the newly introduced macro for the NS_PER_SEC and
friends time constants.
New version of clang (19) has introduced a stricter checks when mixing
integer (and float types) with enums. In this case, we used enum {}
as C17 doesn't have constexpr yet. Change the time conversion constants
to be static const unsigned int instead of enum values.
Check if 'lctx->logconfig' is NULL before using it in isc_log_doit(),
because it's possible that isc_log_destroy() was already called, e.g.
when a 'call_rcu' function wants to log a message during shutdown.
When iterating through the old internal hashmap table, skip all the
nodes that have been already migrated to the new table. We know that
all positions with index less than .hiter are NULL.
When the round robin hashing reorders the map entries on deletion, we
were adjusting the iterator table size only when the reordering was
happening at the internal table boundary. The iterator table size had
to be reduced by one to prevent seeing the entry that resized on
position [0] twice because it migrated to [iter->size - 1] position.
However, the same thing could happen when the same entry migrates a
second time from [iter->size - 1] to [iter->size - 2] position (and so
on) because the check that we are manipulating the entry just in the [0]
position was insufficient. Instead of checking the position [pos == 0],
we now check that the [pos % iter->size == 0], thus ignoring all the
entries that might have moved back to the end of the internal table.
As we now setup the logging very early, parsing the default config would
always print warnings about experimental (and possibly deprecated)
options in the default config. This would even mess with commands like
`named -V` and it is also wrong to warn users about using experimental
options in the default config, because they can't do anything about
this. Add CFG_PCTX_NODEPRECATED and CFG_PCTX_NOEXPERIMENTAL options
that we can pass to cfg parser and silence the early warnings caused by
using experimental options in the default config.
OpenSSL has added support for deterministic ECDSA (RFC 6979) with
version 3.2.
Use it by default as derandomization doesn't pose a risk for DNS
usecases and is allowed by FIPS 186-5.
The fcount_incr() was not increasing counter->count when force was set
to true, but fcount_decr() would try to decrease the counter leading to
underflow and assertion failure. Swap the order of the arguments in the
condition, so the !force is evaluated after incrementing the .count.
Since the enable_fips_mode() now resides inside the isc_tls unit, BIND 9
would fail to compile when FIPS mode was enabled as the DST subsystem
logging functions were missing.
Move the crypto library logging functions from the openssl_link unit to
isc_tls unit and enhance it, so it can now be used from both places
keeping the old dst__openssl_toresult* macros alive.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
MAX_RESTARTS is no longer hard-coded; ns_server_setmaxrestarts()
and dns_client_setmaxrestarts() can now be used to modify the
max-restarts value at runtime. in both cases, the default is 11.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
there were cases in resolver.c when queries for NS records were
started without passing a pointer to the parent fetch's query counter;
as a result, the max-recursion-queries quota for those queries started
counting from zero, instead of sharing the limit for the parent fetch,
making the quota ineffective in some cases.
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
When the SSL object was destroyed, it would invalidate all SSL_SESSION
objects including the cached, but not yet used, TLS session objects.
Properly disassociate the SSL object from the SSL_SESSION before we
store it in the TLS session cache, so we can later destroy it without
invalidating the cached TLS sessions.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
Co-authored-by: Aram Sargsyan <aram@isc.org>
When TLS connection (TLSstream) connection was accepted, the children
listening socket was not attached to sock->server and thus it could have
been freed before all the accepted connections were actually closed.
In turn, this would cause us to call isc_tls_free() too soon - causing
cascade errors in pending SSL_read_ex() in the accepted connections.
Properly attach and detach the children listening socket when accepting
and closing the server connections.
Since the support for OpenSSL Engines has been removed, we can now also
remove the checks for OPENSSL_API_LEVEL; The OpenSSL 3.x APIs will be
used when compiling with OpenSSL 3.x, and OpenSSL 1.1.xx APIs will be
used only when OpenSSL 1.1.x is used.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
When adding glue to the header, we add header to the wait-free stack to
be cleaned up later which sets wfc_node->next to non-NULL value. When
the actual cleaning happens we would only cleanup the .glue_list, but
since the database isn't locked for the time being, the headers could be
reused while cleaning the existing glue entries, which creates a data
race between database versions.
Revert the code back to use per-database-version hashtable where keys
are the node pointers. This allows each database version to have
independent glue cache table that doesn't affect nodes or headers that
could already "belong" to the future database version.
when searching the cache for a node so that we can delete an
rdataset, it is not necessary to set the 'create' flag. if the
node doesn't exist yet, we then we won't be able to delete
anything from it anyway.
dns_difftuple_create() could only return success, so change
its type to void and clean up all the calls to it.
other functions that only returned a result value because of it
have been cleaned up in the same way.
when a priming query is complete, it's currently logged at
level ISC_LOG_DEBUG(1), regardless of success or failure. we
are now raising it to ISC_LOG_NOTICE in the case of failure.
There isn't a realistic reason to ever use e = 4294967297. Fortunately
its codepath wasn't reachable to users and can be safetly removed.
Keep in mind the `dns_key_generate` header comment was outdated. e = 3
hasn't been used since 2006 so there isn't a reason to panic. The
toggle was the public exponents between 65537 and 4294967297.
The previous work in this area was led by the belief that we might be
calling call_rcu() from within call_rcu() callbacks. After carefully
checking all the current callback, it became evident that this is not
the case and the problem isn't enough rcu_barrier() calls, but something
entirely else.
Call the rcu_barrier() just once as that's enough and the multiple
rcu_barrier() calls will not hide the real problem anymore, so we can
find it.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
When putting the 48-bit number into a fixed-size buffer that's exactly 6
bytes, the assertion failure would occur as the 48-bit number is
internally represented as 64-bit number and the code was checking if
there is enough space for `sizeof(val)`. This causes assertion failure
when otherwise valid TSIG signature has a bad timing information.
Specify the size of the argument explicitly, so the 48-bit number
doesn't require 8-byte long buffer.
The fcount_incr() was incorrectly skipping the accounting for the
fetches-per-zone if the force argument was set to true. We want to skip
the accounting only when the fetches-per-zone is completely disabled,
but for individual names we need to do the accounting even if we are
forcing the result to be success.
The PTHREAD_MUTEX_ADAPTIVE_NP and PTHREAD_MUTEX_ERRORCHECK_NP are
usually not defines, but enum values, so simple preprocessor check
doesn't work.
Check for PTHREAD_MUTEX_ADAPTIVE_NP from the autoconf AS_COMPILE_IFELSE
block and define HAVE_PTHREAD_MUTEX_ADAPTIVE_NP. This should enable
adaptive mutex on Linux and FreeBSD.
As PTHREAD_MUTEX_ERRORCHECK actually comes from POSIX and Linux glibc
does define it when compatibility macros are being set, we can just use
PTHREAD_MUTEX_ERRORCHECK instead of PTHREAD_MUTEX_ERRORCHECK_NP.
When automatic-interface-scan is disabled, the route socket was still
being opened. Add new API to connect / disconnect from the route socket
only as needed.
Additionally, move the block that disables periodic interface rescans to
a place where it actually have access to the configuration values.
Previously, the values were being checked before the configuration was
loaded.
