In some circumstances generic TLS code could have resumed data reading
unexpectedly on the TCP layer code. Due to this, the behaviour of
isc_nm_pauseread() and isc_nm_resumeread() might have been
unexpected. This commit fixes that.
The bug does not seems to have real consequences in the existing code
due to the way the code is used. However, the bug could have lead to
unexpected behaviour and, at any rate, makes the TLS code behave
differently from the TCP code, with which it attempts to be as
compatible as possible.
(cherry picked from commit ec0647d546204a0e09aeaf0e2aabb37f1fb67dd0)
When initially hitting the `fetches-per-zone` value, a log message
is being generated for the event of dropping the first fetch, then
any further log events occur only when another fetch is being dropped
and 60 seconds have been passed since the last logged message.
That logic isn't ideal because when the counter of the outstanding
fetches reaches zero, the structure holding the counters' values will
get deleted, and the information about the dropped fetches accumulated
during the last minute will not be logged.
Improve the fcount_logspill() function to makie sure that the final
values are getting logged before the counter object gets destroyed.
(cherry picked from commit 039871ceb767088205563965f7aae622a3f77082)
The +qid=<num> option, which sets the outgoing query ID, was missing
from the usage summary printed using `dig -h` command.
(cherry picked from commit 4dcc855093f7f5c6d46a88a6aabea5f53a673018)
Sometimes tls_do_bio() might be called when there is no new data to
process (most notably, when resuming reads), in such a case internal
TLS session state will remain untouched and old value in 'errno' will
alter the result of SSL_get_error() call, possibly making it to return
SSL_ERROR_SYSCALL. This value will be treated as an error, and will
lead to closing the connection, which is not what expected.
Fedora 33 doesn't support RSASHA1 in future mode. There is no easy
check for this other than by attempting to perform a verification
using known good signatures. We don't attempt to sign with RSASHA1
as that would not work in FIPS mode. RSASHA1 is verify only.
The test vectors were generated using OpenSSL 3.0 and
util/gen-rsa-sha-vectors.c. Rerunning will generate a new set of
test vectors as the private key is not preserved.
e.g.
cc util/gen-rsa-sha-vectors.c -I /opt/local/include \
-L /opt/local/lib -lcrypto
(cherry picked from commit cd3f00874f63a50954cebb78edac8f580a27c0de)
The command 'rndc dumpdb -expired' will include expired RRsets in the
output, but only for the RBTDB_VIRTUAL time (of 5 minutes). This means
that if there is a cache cleaning problem and contents are not cleaned
up, the rndc command has little diagnostic value. Fix this by including
all RRsets in the dumpdb output if the '-expired' flag is set.
(cherry picked from commit 930ba2c914a0abc07fd087d663a7bfb57850d4ca)
The "max-zone-ttl" option should now be configured as part of
dnssec-policy. Use of this option in zone/view/options will be ignored
in any zone that also has dnssec-policy configured.
Reject loading of zones with TTL higher than the max-zone-ttl
from the dnssec-policy.
With this change, any zone with a dnssec-policy in use will ignore
the max-zone-ttl option in zone/view/options.
In the NSSEARCH followup lookup, when one of the queries fails to be
set up (UDP) or connected (TCP), DiG doesn't start the next query.
This is a mistake, because in NSSEARCH mode the queries are independent
and DiG shouldn't stop the lookup process just because setting up (or
connecting to) one of the name servers returns an error code in the
`udp_ready()` or `tcp_connected()` callbacks.
Write a new `nssearch_next()` function which takes care of starting the
next query in NSSEARCH mode, so it can be used in several places without
code repetition.
Make sure that the `udp_ready()` and `tcp_connected()` functions call
`nssearch_next()` in case they won't be calling `send_udp()` and
`send_tcp()` respectively, because in that case the `send_done()`
callback, which usually does the job, won't be called.
Refactor `send_done()` to use the newly written `nssearch_next()`
function.
(cherry picked from commit 76bee507b7415b176897b2fb1a3497bfb8ab194a)
In the NSSEARCH followup lookup, when one of the queries fails to be
sent, DiG doesn't start the next query. This is a mistake, because in
NSSEARCH mode the queries are independent and DiG shouldn't stop the
lookup process just because sending a query to one of the name servers
returns an error code.
Restructure the `send_done()` function to unconditionally send the next
query in NSSEARCH mode, if it exists.
(cherry picked from commit 49ac879dfad91ac08201be3e351450fd9d83b9f5)
In the CI dig sometimes produces warning/error comments when
communicating with the server, which produces problems when comparing
the outputs.
Here is an example of a dig output with a warning message which
is benign, because dig, after a retry, managed to query the server.
;; communications error to 10.53.0.3#7529: timed out
1.2.3.1
1.2.3.2
1.2.3.3
1.2.3.4
When comparing this to the expected output, which doesn't contain
the comment line (starting with double ';'), the outputs don't match.
Use grep inverse logic to strip the comments from the dig outputs.
(cherry picked from commit a5b2aa7c977b5c40b62698a8f46ffd839b764814)
There are existing tests for simulating timeouts, read errors, and
refused connecion errors. Implement also "network unreachable"
simulation.
Use "fixed" string search mode `-F` for `grep` in more places where
it is appropriate to do so.
(cherry picked from commit 626fbf325e048158625d197cd9734da932f6011d)
DiG implements different logic in the `recv_done()` callback function
when processing a failure:
1. For a timed-out query it applies the "retries" logic first, then,
when it fails, fail-overs to the next server.
2. For an EOF (end-of-file, or unexpected disconnect) error it tries to
make a single retry attempt (even if the user has requested more
retries), then, when it fails, fail-overs to the next server.
3. For other types of failures, DiG does not apply the "retries" logic,
and tries to fail-over to the next servers (again, even if the user
has requested to make retries).
Simplify the logic and apply the same logic (1) of first retries, and
then fail-over, for different types of failures in `recv_done()`.
(cherry picked from commit abfd0d363f4f495de00dc4bd41f74726370369ba)
When the `send_done()` callback function gets called with a failure
result code, DiG erroneously cancels the lookup.
Stop canceling the lookup and give DiG a chance to retry the failed
query, or fail-over to another server, using the logic implemented in
the `recv_done()` callback function.
(cherry picked from commit c2329dd110e88a194be4d9a3fe1571dbae8af178)
When the `udp_ready()` callback function gets called with a failure
result code, DiG erroneously cancels the lookup.
Copy the logic behind `tcp_connected()` callback function into
`udp_ready()` so that DiG will now retry the failed query (if retries
are enabled) and then, if it fails again, it will fail-over to the next
server in the list, which synchronizes the behavior between TCP and UDP
modes.
Also, `udp_ready()` was calling `lookup_detach()` without calling
`lookup_attach()` first, but the issue was masked behind the fact
that `clear_current_lookup()` wasn't being called when needed, and
`lookup_detach()` was compensating for that. This also has been fixed.
(cherry picked from commit 3f3108552577c326b4dab6c3b631c51cf0040144)
