Michael Sawyer
e2cb9ff071
Clean up "dead" named processes if the initial version.bind dig fails.
2000-06-14 20:55:52 +00:00
James Brister
379bd2c19c
253. [func] resolv.conf parser now recognises ';' and '#' as
...
comments (anywhere in line, not just as the beginning).
252. [bug] resolv.conf parser mishandled masks on sortlists.
It slso aborted when an unrecognised keyword was seen,
now it silently ignores the entire line.
2000-06-14 19:07:11 +00:00
Andreas Gustafsson
374606311f
removed incorrect cast from offset wraparound check (patch from tale)
2000-06-14 16:25:12 +00:00
Michael Sawyer
3f7ab1762a
Sleep a little longer after killing servers to give them a chance to fully
...
shutdown, in hopes of clearing up the test failure in Solaris.
2000-06-14 15:51:38 +00:00
Michael Sawyer
8f6e9f760b
Give the servers a moment to start up before asking them for version.bind
2000-06-14 02:50:24 +00:00
Andreas Gustafsson
9fbfa24ca5
edited for 9.0.0b4
2000-06-14 02:33:30 +00:00
Brian Wellington
ccd492e4ee
Added transfer-source lines
2000-06-14 00:46:03 +00:00
Michael Sawyer
895c909651
typo
2000-06-13 23:44:05 +00:00
Michael Sawyer
03e8cb3f19
More attempts at getting the code lines on the test output right
2000-06-13 23:41:41 +00:00
Brian Wellington
126c8d0c08
Add listen-on-v6 {none;}; , since without it, v6 was binding v4 mapped
...
sockets and causing failures on some platforms
2000-06-13 22:45:20 +00:00
Michael Sawyer
ee6fe1d197
Remove port option from query-sources
2000-06-13 21:49:56 +00:00
Michael Sawyer
4e42045d2b
Don't reset status halfway through the test
2000-06-13 21:36:27 +00:00
Michael Sawyer
ce745b87f2
Formatting change of output data so it will work with WPK's b9status.pl
...
script
2000-06-13 21:17:00 +00:00
Andreas Gustafsson
1e43538d55
don't forget to export the PERL and SUBDIRS variables
2000-06-13 20:03:43 +00:00
Michael Sawyer
5cca51c7c1
Use PERL env variable for execution of perl.
2000-06-13 19:41:59 +00:00
James Brister
e03329a387
253. [func] resolv.conf parser now recognises ';' and '#' as
...
comments (anywhere in line, not just as the beginning).
252. [bug] resolv.conf parser mishandled masks on sortlists.
It slso aborted when an unrecognised keyword was seen,
now it silently ignores the entire line.
2000-06-13 17:52:58 +00:00
Andreas Gustafsson
3ecf3394e3
search for Perl at configure time, for use by the system
...
test scripts
2000-06-13 17:34:28 +00:00
Andreas Gustafsson
195c06df3e
do not assume that an attempt to run a nonexistent shell command
...
returns an exit status of exactly 1
2000-06-13 17:13:20 +00:00
Andreas Gustafsson
76ce9fbe97
ns3 tried to use the same query-source address as ns1,
...
causing the notify test to fail on all(?) platforms
2000-06-13 16:46:19 +00:00
Andreas Gustafsson
96ef51763f
when creating the query source dispatcher fails, log
...
a message to that effect
2000-06-13 16:33:19 +00:00
Andreas Gustafsson
c24265935e
251. [bug] lwresd caught an assertion failure on startup.
2000-06-13 16:06:17 +00:00
Michael Graff
4d9485ed34
make ipv6 work again
2000-06-13 01:49:46 +00:00
Andreas Gustafsson
87b3cb4ede
support HP-UX 11
2000-06-13 01:18:10 +00:00
Andreas Gustafsson
413ce88331
support solaris2.8: 'plumb' virtual interfaces before
...
configuring them up; don't use whoami as it does not exist on solaris2.8
2000-06-13 01:02:31 +00:00
Michael Sawyer
52ea71106b
Remove duplicate query-source
2000-06-13 01:02:02 +00:00
Michael Sawyer
483ecd44ab
named
2000-06-13 00:57:49 +00:00
Michael Sawyer
5458e9245c
Add query-source everywhere
...
Fix out output
2000-06-13 00:54:53 +00:00
Andreas Gustafsson
7cbfebb762
probe for ipv6 before using it
2000-06-13 00:39:35 +00:00
Andreas Gustafsson
bf45b1b5d6
cleanup of previous change; no functional change
2000-06-13 00:36:14 +00:00
Andreas Gustafsson
5926a0a45e
probe for ipv6 before using it
2000-06-13 00:30:29 +00:00
Michael Sawyer
43a3b93022
Add sleep to xfr test
...
First try and use perl5, then perl, in setup.sh for xferquota.
2000-06-12 23:55:19 +00:00
Andreas Gustafsson
e1310f0e96
nonportable shell construct
2000-06-12 23:48:28 +00:00
Michael Sawyer
9a90646795
Add e: line to run.
2000-06-12 23:08:55 +00:00
Michael Sawyer
dec3e76636
Add (unused) NS1 server configuration, since directory didn't seem to want to go away in CVS.
2000-06-12 23:06:49 +00:00
Brian Wellington
8f239354a0
Added missing zone files
2000-06-12 22:55:52 +00:00
Andreas Gustafsson
0431c9d4d1
support AIX
2000-06-12 22:45:43 +00:00
Andreas Gustafsson
2525055c90
support Irix; don't touch/remove /var/run/system_test_ifsetup multiple times
2000-06-12 22:37:36 +00:00
Michael Graff
2124020751
make the test program work again, using /dev/random, not /tmp/foo.
2000-06-12 22:28:54 +00:00
Michael Graff
c498b4be95
initialize with at least THRESHOLD_BITS bits of entropy for pseudorandom case.
2000-06-12 22:28:05 +00:00
Michael Graff
6a3beb6f7e
don't reset initialized state to ISC_TRUE -- it is a counter now, not a boolean
2000-06-12 21:37:13 +00:00
Michael Sawyer
85db942a01
Missing file
2000-06-12 20:59:33 +00:00
Brian Wellington
898c0c12f0
MIN -> MAX
2000-06-12 20:49:18 +00:00
Andreas Gustafsson
6b07f707e1
new ARM version from Mary
2000-06-12 20:42:37 +00:00
Michael Sawyer
e6e0dadd30
Match output format to what scripts expect
2000-06-12 20:32:47 +00:00
Andreas Gustafsson
8a99c43727
no need to look for version.bind. on port 53 now that all tests
...
run at 5300
2000-06-12 20:20:02 +00:00
Andreas Gustafsson
a6ec6daa1a
do not try to run the tests if the servers didn't start
2000-06-12 20:19:29 +00:00
Michael Sawyer
e7eba81696
Add missing zone file
2000-06-12 19:59:35 +00:00
Michael Sawyer
2634080063
Fix for slight changes in DST interface.
2000-06-12 19:33:30 +00:00
Brian Wellington
7f35bf8e17
-p for pseudorandom
2000-06-12 19:32:10 +00:00
Brian Wellington
f7f3cc5ee6
-p for pseudorandom, -h for help
2000-06-12 19:31:53 +00:00
