The three functions (attach, IO handler, and release) are meant to be
called by any CLI command which requires to dump the contents of a ring
buffer. We do not implement anything generic to dump any ring buffer on
the CLI since it's meant to be used by other functionalities above.
However these functions deal with locking and everything so it's trivial
to embed them in other code.
This function tries to write to the ring buffer, possibly removing enough
old messages to make room for the new one. It takes two arrays of fragments
on input to ease the insertion of prefixes by the caller. It atomically
writes the message, possibly truncating it if desired, and returns the
operation's status.
Our circular buffers are well suited for being used as ring buffers for
not-so-structured data. The machanism here consists in making room in a
buffer before inserting a new record which is prefixed by its size, and
looking up next record based on the previous one's offset and size. We
can have up to 255 consumers watching for data (dump in progress, tail)
which guarantee that entrees are not recycled while they're being dumped.
The complete representation is described in the header file. For now only
ring_new(), ring_resize() and ring_free() are created.
Currently both logs and event sinks may use a file descriptor to
atomically emit some output contents. The two may use the same FD though
nothing is done to make sure they use the same lock. Also there is quite
some redundancy between the two. Better make a specific function to send
a fragmented message to a file descriptor which will take care of the
locking via the fd's lock. The function is also able to truncate a
message and to enforce addition of a trailing LF when building the
output message.
The new functions are :
__b_put_varint() : inserts a varint when it's known that it fits
b_put_varint() : tries to insert a varint at the tail
b_get_varint() : tries to get a varint from the head
b_peek_varint() : tries to peek a varint at a specific offset
Wrapping is supported so that they are expected to be safe to use to
manipulate varints with buffers anywhere.
It will sometimes be useful to encode varints to know the output size in
advance. Two versions are provided, one inline using a switch/case construct
which will be trivial for use with constants (and will be very fast albeit
huge) and one function iterating on the number which is 5 times smaller,
for use with variables.
I forgot to fix this one before pushing, despite my tests. lockon_ptr is
only used to compare pointers, it doesn't need to point to a writable
location. Without threads the atomic store is turned into an assignment
and rightfully complains.
Given that we can pass typed arguments to the trace() function, let's
add provisions for tracking them. They are source-specific so we need
to let the source fill their name and description. Only those with a
non-null name will be proposed.
With a few macros it's possible for a trace source to commit to only
using a certain type for a given argument (or set of). This will be
particularly useful to let the trace subsystem retrieve some precious
information such as a connection, session, listener, source address or
so, and enable/disable filtering and/or locking.
The new TRACE_<level>() macros take a mask, 4 args, a callback and a
static message. From this they also inherit the TRACE_SOURCE macro from
the caller, which contains the pointer to the trace source (so that it's
not required to paste it everywhere), and an ist string is also made by
the concatenation of the file name and the line number. This uses string
concatenation by the preprocessor, and turns it into an ist by the compiler
so that there is no operation at all to perform to adjust the data length
as the compiler knows where to cut during the optimization phase. Last,
the message is also automatically turned into an ist so that it's trivial
to put it into an iovec without having to run strlen() on it.
All arguments and the callback may be empty and will then automatically
be replaced with a NULL pointer. This makes the TRACE calls slightly
lighter especially since arguments are not always used. Several other
options were considered to use variadic macros but there's no outstanding
rule that justifies to place an argument before another one, and it still
looks convenient to have the message be the last one to encourage copy-
pasting of the trace statements.
A generic TRACE() macro takes TRACE_LEVEL in from the source file as the
trace level instead of taking it from its name. This may slightly simplify
the production of traces that always run at the same level (internal core
parts may probably only be called at developer level).
The trace() call will support an optional decoding callback and 4
arguments that this function is supposed to know how to use to provide
extra information. The output remains unchanged when the function is
NULL. Otherwise, the message is pre-filled into the thread-local
trace_buf, and the function is called with all arguments so that it
completes the buffer in a readable form depending on the expected
level of detail.
This new "level" argument will allow the trace sources to label the
traces for different purposes, and filter out some of them if they
are not relevant to the current target. Right now we have 5 different
levels:
- USER : the least verbose one, only a few functional information
- PAYLOAD: like user but also displays some payload-related information
- PROTO: focuses on the protocol's framing
- STATE: also indicate state internal transitions or non-transitions
- DEVELOPER: adds extra info about branches taken in the code (break
points, return points)
We now pass an extra argument "where" to the trace() call, which
is supposed to be an ist made of the concatenation of the filename
and the line number. We only keep the last 10 chars from this string
since the end of file names is most often easy to recognize. This
gives developers useful information at very low cost.
For now it remains quite basic. It performs a few state checks, calls
the source's sink if defined, and performs the transitions between
RUNNING, STOPPED and WAITING when the configured events match.
For now it lists the sources if one is not provided, and checks
for the source's existence. It lists the events if not provided,
checks for their existence if provided, and adjusts reported
events/start/stop/pause events, and performs state transitions.
It lists sinks and adjusts them as well. Filters, lock, and
level are not implemented yet.
The principle of this subsystem will be to support taking live traces
at various places in the code with conditional triggers, filters, and
ability to lock on some elements. The traces will support typed events
and will be sent into sinks made of ring buffers, file descriptors or
remote servers.
This is the most basic type of sink. It pre-registers "stdout" and
"stderr", and is able to use writev() on them. The writev() operation
is locked to avoid mixing outputs. It's likely that the registration
should move somewhere else to take into account the fact that stdout
and stderr are still opened or are closed.
The principle will be to be able to dispatch events to various destinations
called "sinks". This is already done in part in logs where log servers can
be either a UDP socket or a file descriptor. This will be needed with the
new trace subsystem where we may also want to add ring buffers. And it turns
out that all such destinations make sense at all places. Logs may need to be
sent to a TCP server via a ring buffer, or consulted from the CLI. Trace
events may need to be sent to stdout/stderr as well as to remote log servers.
This patch creates a new structure "sink" aiming at addressing these similar
needs. The goal is to merge together what is common to all of them, such as
the output format, the dropped events count, etc, and also keep separately
the target identification (network address, file descriptor). Provisions
were made to have a "waiter" on the sink. For a TCP log server it will be
the task to wake up after writing to the log buffer. For a ring buffer, it
could be the list of watchers on the CLI running a "tail" operation and
waiting for new events. A lock was also placed in the struct since many
operations will require some locking, including the FD ones. The output
formats covers those in use by logs and two extra ones prepending the ISO
time in front of the message (convenient for stdio/buffer).
For now only the generic infrastructure is present, no type-specific
output is implemented. There's the sink_write() function which prepares
and formats a message to be sent, trying hard to avoid copies and only
using pointer manipulation, where the type-specific code just has to be
added. Dropped messages are already counted (for now 100% drop). The
message is put into an iovec array as it will be trivial to use with
file descriptors and sockets.
The function call tracing code is a quite old and was never ported to
support threads. It's not even sure whether it still works well, but
at least its presence creates confusion for future work so let's rename
it to calltrace.c and add a comment about its lack of thread-safety.
It's sometimes convenient for debugging macros not to be forced to
explicitly pass NULL in an unused argument. This macro does this, it
replaces a missing arg with NULL.
The current functions are seen outside from the debugging code and are
convenient to export so that we can improve the thread dump output :
void hlua_applet_tcp_fct(struct appctx *ctx);
void hlua_applet_http_fct(struct appctx *ctx);
struct task *hlua_process_task(struct task *task, void *context, unsigned short state);
Of course they are only available when USE_LUA is defined.
This is somewhat related to indent_msg() except that this one places a
known prefix at the beginning of each line, allows to replace the EOL
character, and not to insert a prefix on the first line if not desired.
It works with a normal output buffer/chunk so it doesn't need to allocate
anything nor to modify the input string. It is suitable for use in multi-
line backtraces.
When I/O events are being processed, we want to make sure to mark the
thread as not stuck. The reason is that some pollers (like poll()) which
do not limit the number of FDs they report could possibly report a huge
amount of FD all having to perform moderately expensive operations in
the I/O callback (e.g. via mux-pt which forwards to the upper layers),
making the watchdog think the thread is stuck since it does not schedule.
Of course this must never happen but if it ever does we must be liberal
about it.
This should be backported to 2.0, where the situation may happen more
easily due to the FD cache which can start to collect a large amount of
events. It may be related to the report in issue #201 though nothing is
certain about it.
These functions perform all the boring filling of the appctx's
cli struct needed by CLI parsers to return a message or an error,
and they return 1 so that they can be used as a single-line return
statement. They may be used for const messages or dynamic messages.
Right now we used to have extremely inconsistent states to report output,
one is CLI_ST_PRINT which prints constant message cli->msg with the
assigned severity, and CLI_ST_PRINT_FREE which prints dynamically
allocated cli->err with severity LOG_ERR, and nothing in between,
eventhough it's useful to be able to report dynamically allocated
messages as well as constant error messages.
This patch adds two extra states, which are not particularly well named
given the constraints imposed by existing ones. One is CLI_ST_PRINT_ERR
which prints a constant error message. The other one is CLI_ST_PRINT_DYN
which prints a dynamically allocated message. By doing so we maintain
the compatibility with current code.
It is important to keep in mind that we cannot pre-initialize pointers
and automatically detect what message type it is based on the assigned
fields, because the CLI's context is in a union shared with all other
users, thus unused fields contain anything upon return. This is why we
have no choice but using 4 states. Keeping the two fields <msg> and
<err> remains useful because one is const and not the other one, and
this catches may copy-paste mistakes. It's just that <err> is pretty
confusing here, it should be renamed.
The CPU time accounting field called "cpu_time" is used only by tasks
and not tasklets, yet it used to be stored into the TASK_COMMON part,
which doesn't make sense and wastes tasklet memory. In addition, moving
it to tasks also helps better group the various parts in cache lines.
Since last commit there's no point anymore in having two variants of the
same function, let's switch to b_free() only. __b_drop() was renamed to
__b_free() for obvious consistency reasons.
A small race exists in buffers with "show sess all". This one wants to show
some information grabbed from the buffer (especially in HTX mode). But the
thread owning this buffer might just be releasing its area, right after a
free() or munmap() call, resulting in a head that is not seen as empty yet
though the area was released. It may then be dereferenced by "show sess all"
causing a crash. Note that in practice it only happens in debug mode with
UAF enabled, but it's tricky enough to fix it right now.
This should be backported to stable versions which support threads and a
store barrier. It's worth noting that by performing the clearing first,
b_free() and b_drop() now become two exact equivalent.
Commit 85b2cae63 ("MINOR: pools: make the thread harmless during the
mmap/munmap syscalls") was used to relax the pressure experienced by
other threads when running in debug mode with UAF enabled. It places
a pair of thread_harmless_now()/thread_harmless_end() around the call
to mmap(), assuming callers are not sensitive to parallel activity.
But there are a few cases like "show sess all" where this happens in
isolated threads, and marking the thread as harmless there is a very
bad idea, even worse when arriving to thread_harmless_end() which loops
forever.
Let's only do that when the thread is not isolated. No backport is
needed as the patch above was only in 2.1-dev.
When parsing references to stick-tables declared as backends, they are added to
a list of proxies (they are proxies!) which refer to this stick-tables.
Before this patch we added them to these list without checking they were already
present, making the silly hypothesis the actions/sample were checked/resolved in the same
order the proxies are parsed.
This patch implement a simple inline function to in_proxies_list() to test
the presence of a proxy in a list of proxies. We use this function when resolving
/checking samples/actions.
This bug was introduced by 015e4d7 commit.
Must be backported to 2.0.
In stream_set_backend(), if we have a TCP stream, and we want to upgrade it
to H2 instead of attempting ot reuse the stream, just destroy the
conn_stream, make sure we don't log anything about the stream, and pretend
we failed setting the backend, so that the stream will get destroyed.
New streams will then be created by the mux, as if the connection just
happened.
This fixes a crash when upgrading from TCP to H2, as the H2 mux totally
ignored the conn_stream provided by the upgrade, as reported in github
issue #196.
This should be backported to 2.0.
It happens that upon looping threads the watchdog fires, starts a dump,
and other threads expire their budget while waiting for the other threads
to get dumped and trigger a watchdog event again, adding some confusion
to the traces. With this patch the situation becomes clearer as we export
the list of threads being dumped so that the watchdog can check it before
deciding to trigger. This way such threads in queue for being dumped are
not attempted to be reported in turn.
This should be backported to 2.0 as it helps understand stack traces.
In the poller code, instead of just remembering if we're currently polling
a fd or not, remember if we're polling it for writing and/or for reading, that
way, we can avoid to modify the polling if it's already polled as needed.
Now that the architecture was changed so that attempts to receive/send data
always come from the upper layers, instead of them only trying to do so when
the lower layer let them know they could try, we can finally get rid of the
fd cache. We don't really need it anymore, and removing it gives us a small
performance boost.
A problem involving server slowstart was reported by @max2k1 in issue #197.
The problem is that pendconn_grab_from_px() takes the proxy lock while
already under the server's lock while process_srv_queue() first takes the
proxy's lock then the server's lock.
While the latter seems more natural, it is fundamentally incompatible with
mayn other operations performed on servers, namely state change propagation,
where the proxy is only known after the server and cannot be locked around
the servers. Howwever reversing the lock in process_srv_queue() is trivial
and only the few functions related to dynamic cookies need to be adjusted
for this so that the proxy's lock is taken for each server operation. This
is possible because the proxy's server list is built once at boot time and
remains stable. So this is what this patch does.
The comments in the proxy and server structs were updated to mention this
rule that the server's lock may not be taken under the proxy's lock but
may enclose it.
Another approach could consist in using a second lock for the proxy's queue
which would be different from the regular proxy's lock, but given that the
operations above are rare and operate on small servers list, there is no
reason for overdesigning a solution.
This fix was successfully tested with 10000 servers in a backend where
adjusting the dyncookies in loops over the CLI didn't have a measurable
impact on the traffic.
The only workaround without the fix is to disable any occurrence of
"slowstart" on server lines, or to disable threads using "nbthread 1".
This must be backported as far as 1.8.
When a lua action or a lua sample fetch is called, a lua transaction is
created. It is an entry in the stack containing the class TXN. Thanks to it, we
can know the direction (request or response) of the call. But, for some
functions, it is also necessary to know if the buffer is "HTTP ready" for the
given direction. "HTTP ready" means there is a valid HTTP message in the
channel's buffer. So, when a lua action or a lua sample fetch is called, the
flag HLUA_TXN_HTTP_RDY is set if it is appropriate.
This one was added by commit daacf3664 ("BUG/MEDIUM: protocols: add a
global lock for the init/deinit stuff") but I forgot to add it to the
include file, breaking DEBUG_THREAD.
There is no standard case for HTTP header names because, as stated in the
RFC7230, they are case-insensitive. So applications must handle them in a
case-insensitive manner. But some bogus applications erroneously rely on the
case used by most browsers. This problem becomes critical with HTTP/2
because all header names must be exchanged in lowercase. And HAProxy uses the
same convention. All header names are sent in lowercase to clients and servers,
regardless of the HTTP version.
This design choice is linked to the HTX implementation. So, for previous
versions (2.0 and 1.9), a workaround is to disable the HTX mode to fall
back to the legacy HTTP mode.
Since the legacy HTTP mode was removed, some users reported interoperability
issues because their application was not able anymore to handle HTTP/1 message
received from HAProxy. So, we've decided to add a way to change the case of some
headers before sending them. It is now possible to define a "mapping" between a
lowercase header name and a version supported by the bogus application. To do
so, you must use the global directives "h1-case-adjust" and
"h1-case-adjust-file". Then options "h1-case-adjust-bogus-client" and
"h1-case-adjust-bogus-server" may be used in proxy sections to enable the
conversion. See the configuration manual for more info.
Of course, our advice is to urgently upgrade these applications for
interoperability concerns and because they may be vulnerable to various types of
content smuggling attacks. But, if your are really forced to use an unmaintained
bogus application, you may use these directive, at your own risks.
If it is relevant, this feature may be backported to 2.0.
Dragan Dosen found that the listeners lock is not sufficient to protect
the listeners list when proxies are stopping because the listeners are
also unlinked from the protocol list, and under certain situations like
bombing with soft-stop signals or shutting down many frontends in parallel
from multiple CLI connections, it could be possible to provoke multiple
instances of delete_listener() to be called in parallel for different
listeners, thus corrupting the protocol lists.
Such operations are pretty rare, they are performed once per proxy upon
startup and once per proxy on shut down. Thus there is no point trying
to optimize anything and we can use a global lock to protect the protocol
lists during these manipulations.
This fix (or a variant) will have to be backported as far as 1.8.
Empty error files may be used to disable the sending of any message for specific
error codes. A common use-case is to use the file "/dev/null". This way the
default error message is overridden and no message is returned to the client. It
was supported in the legacy HTTP mode, but not in HTX. Because of a bug, such
messages triggered an error.
This patch must be backported to 2.0 and 1.9. However, the patch will have to be
adapted.
When forcing the outgoing address of a connection, till now we used to
allocate this outgoing connection and set the address into it, then set
SF_ADDR_SET. With connection reuse this causes a whole lot of issues and
difficulties in the code.
Thanks to the previous changes, it is now possible to store the target
address into the stream instead, and copy the address from the stream to
the connection when initializing the connection. assign_server_address()
does this and as a result SF_ADDR_SET now reflects the presence of the
target address in the stream, not in the connection. The http_proxy mode,
the peers and the master's CLI now use the same mechanism. For now the
existing connection code was not removed to limit the amount of tricky
changes, but the allocated connection is not used anymore.
This change also revealed a latent issue that we've been having around
option http_proxy : the address was set in the connection but neither the
SF_ADDR_SET nor the SF_ASSIGNED flags were set. It looks like the connection
could establish only due to the fact that it existed with a non-null
destination address.
The purpose will be to store the target address there and not to
allocate a connection just for this anymore. For now it's only placed
in the struct, a few fields were moved to plug some holes, and the
entry is freed on release (never allocated yet for now). This must
have no impact. Note that in order to fit, the store_count which
previously was an int was turned into a short, which is way more
than enough given that the hard-coded limit is 8.
Now addresses are dynamically allocated when needed. Each connection is
created with src=dst=NULL, these entries are allocated on the fly, and
released when the connection is released.
This commit places calls to sockaddr_alloc() at the places where an address
is needed, and makes sure that the allocation is properly tested. This does
not add too many error paths since connection allocations are already in the
vicinity and share the same error paths. For the two cases where a
clear_addr() was called, instead the address was not allocated.
This pool will be used to allocate storage for source and destination
addresses used in connections. Two functions sockaddr_{alloc,free}()
were added and will have to be used everywhere an address is needed.
These ones are safe for progressive replacement as they check that the
existing pointer is set before replacing it. The pool is not yet used
during allocation nor freeing. Also they operate on pointers to pointers
so they will perform checks and replace values. The free one nulls the
pointer.
This is in preparation for the switch to dynamic address allocation,
let's migrate the code using the old fields to the pointers instead.
Note that no extra check was added for now, the purpose is only to
get the code to use the pointers and still work.
In the proxy protocol message handling we make sure the addresses are
properly allocated before declaring them unset.
At the moment we're facing difficulties with connection reuse based on
the fact that connections may be allocated very early only to set a
target address in transparent mode. With the imminent removal of the
legacy mode, the connection reuse by a same stream will not exist
anymore and all this awful complexity is not justified anymore. However
we still need to be able to assign addresses somewhere.
Thus instead of allocating a connection, we'll only place addresses where
needed in the stream during operations. But this takes quite some room
(typically 128 bytes). This is a nice opportunity for cleaning all this
up and dynamically allocatating the addresses fields, which will result
in actually saving memory from connection structs since most of the time
the client's "to" address is not used and the server's "from" is not used
either, thus saving ~256 bytes per end-to-end connection.
For now these new "src" and "dst" pointers point to addr.from and addr.to.
This will allow us to smoothly update the whole code to use these pointers
prior to going further and switching them to pools.
These functions are not used anymore. They didn't report failures and
as such were often misused. conn_get_src() and conn_get_dst() now
replaced them everywhere.
The backend connect code uses conn_get_{from,to}_addr to forward addresses
in transparent mode and to map server ports, without really checking if the
operation succeeds. In preparation of future changes, let's switch to
conn_get_{src,dst}() and integrate status check for possible failures.
These functions currently are the same as conn_get_from_addr() and
conn_get_to_addr() respectively except that they return a status for
the operation that the caller can test.
Default HTTP error messages are stored in an array of chunks. And since the HTX
was added, these messages are also converted in HTX and stored in another
array. But now, the first array is not used anymore because the legacy HTTP mode
was removed.
So now, only the array with the HTX messages are kept. The other one was
removed.
The keywords req* and rsp* are now unsupported. So the corresponding lists are
now unused. It is safe to remove them from the structure proxy.
As a result, the code dealing with these rules in HTTP analyzers was also
removed.
It was announced for the 2.1. Following keywords are now unsupported:
* reqadd, reqallow, reqiallow, reqdel, reqidel, reqdeny, reqideny, reqpass,
reqipass, reqrep, reqirep reqtarpit, reqitarpit
* rspadd, rspdel, rspidel, rspdeny, rspideny, rsprep, rspirep
a fatal error is emitted if one of these keyword is found during the
configuraion parsing.
The option 'http-tunnel' is deprecated and it was only used in the legacy HTTP
mode. So this option is now totally ignored and a warning is emitted during
HAProxy startup if it is found in a configuration file.
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
Many flags of the HTTP transction (TX_*) are now unused and useless. So the
flags TX_WAIT_CLEANUP, TX_HDR_CONN_*, TX_CON_CLO_SET and TX_CON_KAL_SET were
removed. Most of TX_CON_WANT_* were also removed. Only TX_CON_WANT_TUN has been
kept.
First of all, all legacy HTTP analyzers and all functions exclusively used by
them were removed. So the most of the functions in proto_http.{c,h} were
removed. Only functions to deal with the HTTP transaction have been kept. Then,
http_msg and hdr_idx modules were entirely removed. And finally the structure
http_msg was lightened of all its useless information about the legacy HTTP. The
structure hdr_ctx was also removed because unused now, just like unused states
in the enum h1_state. Note that the memory pool "hdr_idx" was removed and
"http_txn" is now smaller.
This commit breaks the compatibility with filters still relying on the legacy
HTTP code. The legacy callbacks were removed (http_data, http_chunk_trailers and
http_forward_data).
For now, the filters must still set the flag FLT_CFG_FL_HTX to be used on HTX
streams.
Since the legacy HTTP mode is disbabled, all HTTP sample fetches work on HTX
streams. So it is safe to remove all code relying on HTTP legacy mode. Among
other things, the function smp_prefetch_http() was removed with the associated
macros CHECK_HTTP_MESSAGE_FIRST() and CHECK_HTTP_MESSAGE_FIRST_PERM().
Since the legacy HTTP mode is disabled and no multiplexer relies on it anymore,
there is no reason to have 2 multiplexer protocols for the HTTP. So the protocol
PROTO_MODE_HTX was removed and all HTTP multiplexers use now PROTO_MODE_HTTP.
Because the h2 multiplexer only uses the HTX mode, following H2 functions were
removed :
* h2_prepare_h1_reqline
* h2_make_h1_request()
* h2_make_h1_trailers()
Instead of using a array of (struct block), it is more natural and intuitive to
use an array of char. Indeed, not only (struct block) are stored in this array,
but also their payload.
<head> and <tail> fields are now signed 32-bits integers. For an empty HTX
message, these fields are set to -1. So the field <used> is now useless and can
safely be removed. To know if an HTX message is empty or not, we just compare
<head> against -1 (it also works with <tail>). The function htx_nbblks() has
been added to get the number of used blocks.
A long time ago, applets were seen as an alternative to connections,
and since their respective sizes were roughly equal it appeared wise
to share the same pool. Nowadays, connections got significantly larger
but applets are not that often used, except for the cache. However
applets are mostly complementary and not alternatives anymore, as
it's very possible not to have a back connection or to share one with
other streams.
The connections will soon lose their addresses and their size will
shrink so much that appctx won't fit anymore. Given that the old
benefits of sharing these pools have long disappeared, let's stop
doing this and have a dedicated pool for appctx.
Since commit 81492c989 ("MINOR: threads: flatten the per-thread cpu-map"),
we don't keep the proc*thread matrix anymore to represent the full binding
possibilities, but only the proc and thread ones. The problem is that the
per-process binding is not the same for each thread and for the process,
and the proc[] array was assumed to store the per-proc first thread value
when doing this change. Worse, the logic present there tries to deal with
thread ranges and process ranges in a way which automatically exclused the
other possibility (since ranges cannot be used on both) but as such fails
to apply changes if neither the process nor the thread is expressed as a
range.
The real problem comes from the fact that specifying cpu-map 1/1 doesn't
yet reveal if the per-process mask or the per-thread mask needs to be
updated. In practice it's the thread one but then the current storage
doesn't allow to store the binding of the first thread of each other
process in nbproc>1 configurations.
When removing the proc*thread matrix, what ought to have been kept was
both the thread column for process 1 and the process line for threads 1,
but instead only the thread column was kept. This patch reintroduces the
storage of the configuration for the first thread of each process so that
it is again possible to store either the per-thread or per-process
configuration.
As a partial workaround for existing configurations, it is possible to
systematically indicate at least two processes or two threads at once
and map them by pairs or more so that at least two values are present
in the range. E.g :
# set processes 1-4 to cpus 0-3 :
cpu-map auto:1-4/1 0 1 2 3
# or:
cpu-map 1-2/1 0 1
cpu-map 2-3/1 2 3
# set threads 1-4 to cpus 0-3 :
cpu-map auto:1/1-4 0 1 2 3
# or :
cpu-map 1/1-2 0 1
cpu-map 3/3-4 2 3
This fix must be backported to 2.0.
Move the logic to decide if we redispatch to a new server from
sess_update_st_cer() to a new inline function, stream_choose_redispatch(), and
use it in do_l7_retry() instead of just setting the state to SI_ST_REQ.
That way, when using L7 retries, we won't redispatch the request to another
server except if "option redispatch" is used.
This should be backported to 2.0.
Sometimes we need to delegate some list processing to a function running
on another thread. In this case the list element will simply be queued
into a dedicated self-locked list and the task responsible for this list
will be woken up, calling the associated function which will run over the
list.
This is what work_list does. Such lists will be dedicated to a limited
type of work but will significantly ease such remote handling. A function
is provided to create these per-thread lists, their tasks and to properly
bind each task to a distinct thread, so that the caller only has to store
the resulting pointer to the start of the structure.
These structures should not be abused though as each head will consume
4 pointers per thread, hence 32 bytes per thread or 2 kB for 64 threads.
When we're purging idle connections, there's a race condition, when we're
removing the connection from the idle list, to add it to the list of
connections to free, if the thread owning the connection tries to free it
at the same time.
To fix this, simply add a per-thread lock, that has to be hold before
removing the connection from the idle list, and when, in conn_free(), we're
about to remove the connection from every list. That way, we know for sure
the connection will stay valid while we remove it from the idle list, to add
it to the list of connections to free.
This should happen rarely enough that it shouldn't have any impact on
performances.
This has not been reported yet, but could provoke random segfaults.
This should be backported to 2.0.
The maximum number of idle connections for a server can be configured by setting
the server option "pool-max-conn". But when we try to add a connection in its
idle list, because of a wrong comparison, it may be rejected because there are
already "pool-max-conn - 1" idle connections.
This patch must be backported to 2.0 and 1.9.
While experimenting with potentially improved fairness and latency using
ticket locks on a Ryzen 16-thread/8-core, a very strange situation happened
a lot for some levels of traffic. Around 300k connections per second, no
more connections would be accepted on the multi-threaded listener but all
others would continue to work fine. All attempts to trace showed that the
threads were all in the trylock in the fd cache, or in the spinlock of
fd_update_events(), or in the one of fd_may_recv(). But as indicated this
was not a deadlock since the process continues to work fine.
After quite some investigation it appeared that the issue is caused by a
lack of fairness between the fdcache's trylock and these functions' spin
locks above. In fact, regardless of the success or failure of the fdcache's
attempt at grabbing the lock, the poller was calling fd_update_events()
which locks the FD once for something that can be done with a CAS, and
then calls fd_may_recv() with another lock for something that most often
didn't change. The high contention on these spinlocks leaves no chance to
any other thread to grab the lock using trylock(), and once this happens,
there is no thread left to process incoming connection events nor to stop
polling on the FD, leaving all threads at 100% CPU but partially operational.
This patch addresses the issue by using bit-test-and-set instead of the OR
in fd_may_recv() / fd_may_send() so that nothing is done if the FD was
already configured as expected. It does the same in fd_update_events()
using a CAS to check if the FD's events need to be changed at all or not.
With this patch applied, it became impossible to reproduce the issue, and
now there's no way to saturate all 16 CPUs with the load used for testing,
as no more than 1350-1400 were noticed at 300+kcps vs 1600.
Ideally this patch should go further and try to remove the remaining
incarnations of the fdlock as this seems possible, but it's difficult
enough to be done in a distinct patch that will not have to be backported.
It is possible that workloads involving a high connection rate may slightly
benefit from this patch and observe a slightly lower CPU usage even when
the service doesn't misbehave.
This patch must be backported to 2.0 and 1.9.
These calls can take quite some time and leave the thread harmless so
it's better to mark it as such. This makes "show sess" respond way
faster during high loads running on processes build with DEBUG_UAF
since these calls are stressed a lot.
When calling mmap(), in general the system gives us a page but does not
really allocate it until we first dereference it. And it turns out that
this time is much longer than the time to perform the mmap() syscall.
Unfortunately, when running with memory debugging enabled, we mmap/munmap()
each object resulting in lots of such calls and a high contention on the
allocator. And the first accesses to the page being done under the pool
lock is extremely damaging to other threads.
The simple fact of writing a 0 at the beginning of the page after
allocating it and placing the POOL_LINK pointer outside of the lock is
enough to boost the performance by 8x in debug mode and to save the
watchdog from triggering on lock contention. This is what this patch
does.
The malloc and free calls and especially the underlying mmap/munmap()
can occasionally take a huge amount of time and even cause the thread
to sleep. This is visible when haproxy is compiled with DEBUG_UAF which
causes every single pool allocation/free to allocate and release pages.
In this case, when using the locked pools, the watchdog can occasionally
fire under high contention (typically requesting 40000 1M objects in
parallel over 8 threads). Then, "perf top" shows that 50% of the CPU
time is spent in mmap() and munmap(). The reason the watchdog fires is
because some threads spin on the pool lock which is held by other threads
waiting on mmap() or munmap().
This patch modifies this so that the pool lock is released during these
syscalls. Not only this allows other threads to request try to allocate
their data in parallel, but it also considerably reduces the lock
contention.
Note that the locked pools are only used on small architectures where
high thread counts would not make sense, so this will not provide any
benefit in the general case. However it makes the debugging versions
way more stable, which is always appreciated.
In the function stream_int_notify(), when the opposite stream-interface is
blocked because there is no more room into the input buffer, if the flag
CF_WRITE_PARTIAL is set on this buffer, it is unblocked. It is a way to unblock
the reads on the other side because some data was sent.
But it is a problem during the fast-forwarding because only the stream is able
to remove the flag CF_WRITE_PARTIAL. So it is possible to have this flag because
of a previous send while the input buffer of the opposite stream-interface is
now full. In such case, the opposite stream-interface will be woken up for
nothing because its input buffer is full. If the same happens on the opposite
side, we will have a loop consumming all the CPU.
To fix the bug, the opposite side is now only notify if there is some available
room in its input buffer in the function si_cs_send(), so only if some data was
sent.
This patch must be backported to 2.0 and 1.9.
This code should be now used by action to stop at the same time the rules
processing and the possible following processings. And from its side, the return
code ACT_RET_STOP should be used to only stop rules processing.
So concretely, for TCP rules, there is no changes. ACT_RET_STOP and ACT_RET_DONE
are handled the same way. However, for HTTP rules, ACT_RET_STOP should now be
mapped on HTTP_RULE_RES_STOP and ACT_RET_DONE on HTTP_RULE_RES_DONE. So this
way, a action will have the possibilty to stop all processing or only rules
processing.
Note that changes about the TCP is done in this commit but changes about the
HTTP will be done in another one because it will fix a bug in the same time.
This patch must be backported to 2.0 because a bugfix depends on it.
When deciding if we keep an idle connection in the session, check if
the number of connections currently in the session is >= the max allowed,
not >, or we'll keep an extra connection.
This should be backported to 1.9 and 2.0.
Just calling conn_force_unsubscribe() from conn_upgrade_mux_fe() is not
enough, as there may be multiple XPRT involved. Instead, require that
any user of conn_upgrade_mux_fe() unsubscribe itself before calling it.
This should fix upgrading a TCP connection to HTX when using SSL.
This should be backported to 2.0.
The receive limit of an HTX channel must be calculated against the total size of
the HTX message. Otherwise, the buffer may never be seen as full whereas the
receive limit is 0. Indeed, the function channel_htx_full() already takes care
to add a block size to the buffer's reserve (8 bytes). So if the function
channel_htx_recv_limit() also keep a block size free in addition to the buffer's
reserve, it means that at least 2 block size will be kept free but only one will
be taken into account, freezing the stream if the option http-buffer-request is
enabled.
This patch fixes the Github issue #136. It should be backported to 2.0 and
1.9. Thanks jaroslawr (Jarosław Rzeszótko) for his help.
Revert commit fe4abe62c7.
The goal was to make sure for health-checks, we would not get sockets in
TIME_WAIT. To do so, we would not call shutdown() if linger_risk is set.
However that is wrong, and that means shutw would never be forwarded to
the server, and thus we could get connection that are never properly closed.
Instead, to fix the original problem as described here :
https://www.mail-archive.com/haproxy@formilux.org/msg34080.html
Just make sure the checks code call cs_shutr() before calling cs_shutw().
If shutr has been called, conn_sock_shutw() will make no attempt to call
shutdown(), as it knows close() will be called.
We should really review and revamp the shutr/shutw code, as described in
github issue #142.
This should be backported to 1.9 and 2.0.
When using a level lower than admin on the master CLI, a \n is output
before the response, this is caused by the response of the "operator" or
"user" that are sent before the actual command.
To fix this problem we introduce the flag APPCTX_CLI_ST1_NOLF which ask
a command response to not be followed by the final \n.
This patch made a special case with the command operator and user
followed by a - so they are not followed by \n.
This patch must be backported to 2.0 and 1.9.
As its name suggest, this function change the value length of a block. But it
also update the HTX message accordingly. It simplifies the HTX API. The function
htx_set_blk_value_len() is still available and must be used with caution because
this one does not update the HTX message. It just updates the HTX block. It
should be considered as an internal function. When possible,
htx_change_blk_value_len() should be used instead.
This function is used to fix a bug affecting the 2.0. So, this patch must be
backported to 2.0.
Server states can be recovered from either a "global" file (all backends)
or a "local" file (per backend).
The way the algorithm to parse the state file was first implemented was good
enough for a low number of backends and servers per backend.
Basically, for each backend the state file (global or local) is opened,
parsed entirely and for each line we check if it contains data related to
a server from the backend we're currently processing.
We must read the file entirely, just in case some lines for the current
backend are stored at the end of the file.
This does not scale at all!
This patch changes the behavior above for the "global" file only. Now,
the global file is read and parsed once and all lines it contains are
stored in a tree, for faster discovery.
This result in way much less fopen, fgets, and strcmp calls, which make
loading of very big state files very quick now.
