Since various 'find' incantations can emit container directories
in various orders, we cannot refuse to update a dir because it's
apparently the same age.
MFC after: 3 days
For gcc' __builtin_frame_address() to work, all call frames need to save
frame pointer. In particular, this is important for the upper frame that
should terminate the chain.
No objections from: jhb
PR: amd64/126543
MFC after: 1 week
The routines in grantpt.c have been moved to ptsname.c in the MPSAFE TTY
layer, because grantpt() is now effectively a no-op. I forgot to remove
the corresponding source file from libc.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
'kern.cp_time'. For a live kernel it uses the sysctl. For a crashdump,
it first checks to see if the kernel has a 'cp_time' global symbol. If
it does, it uses that. If that doesn't work, when it uses the recently
added kvm_getmaxcpu(3) and kvm_getpcpu(3) routines to walk all the CPUs
and sum up their counters.
MFC after: 1 week
uuid_dec_be() functions. These routines are not part of the
DCE RPC API. They are provided for convenience.
Reviewed by: marcel
Obtained from: NetBSD
MFC after: 1 week
detect whether the integer division table is large enough to handle the
divisor. Before this change, the last two table elements were never used,
thus causing the slow path to be used for those divisors.
Right now the bpf(4) driver uses the cloning API to generate /dev/bpf%u.
When an application such as tcpdump needs a BPF, it opens /dev/bpf0,
/dev/bpf1, etc. until it opens the first available device node. We used
this approach, because our devfs implementation didn't allow
per-descriptor data.
Now that we can, make it use devfs_get_cdevpriv() to obtain the private
data. To remain compatible with the existing implementation, add a
symlink from /dev/bpf0 to /dev/bpf. I've already changed libpcap to
compile with HAVE_CLONING_BPF, which makes it use /dev/bpf. There may be
other applications in the base system (dhclient) that use the loop to
obtain a valid bpf.
Discussed on: src-committers
Approved by: csjp
#pragma STDC CX_LIMITED_RANGE ON
the "ON" needs to be in caps. gcc doesn't understand this pragma
anyway and assumes it is always on in any case, but icc supports
it and cares about the case.
conj() instead of using expressions like z * I. The latter is bad for
several reasons:
1. It is implemented using arithmetic, which is unnecessary, and can
generate floating point exceptions, contrary to the requirements on
these functions.
2. gcc implements complex multiplication using a formula that breaks
down for infinities, e.g., it gives INFINITY * I == nan + inf I.
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.
Sponsored by: Isilon Systems
Reviewed by: alfred
to this commit, "env BLOCKSIZE=4X df" prints not only "4X: unknown
blocksize" as expected, but sometimes also "maximum blocksize is 1G"
and "minimum blocksize is 512" depending on what happened to be on
the stack.
Found by: LLVM/Clang Static Checker
understand which code paths aren't possible.
This commit eliminates 117 false positive bug reports of the form
"allocate memory; error out if pointer is NULL; use pointer".
environ[0] to be more obvious that environ is not NULL before environ[0]
is tested. Although I believe the previous code worked, this change
improves code maintainability.
Reviewed by: ache
MFC after: 3 days
assumed to be reviewd by them):
Stir directly from the kernel PRNG, without taking less random pid & time
bytes too (when it is possible).
The difference with OpenBSD code is that they have KERN_ARND sysctl for
that task, while we need to read /dev/random
- When y/x is huge, it's faster and more accurate to return pi/2
instead of pi - pi/2.
- There's no need for 3 lines of bit fiddling to compute -z.
- Fix a comment.
wide string arguments.
Also simplify the code that handles length modifiers and make it
more conservative. For instance, be explicit about the modifiers
allowed for %d, rather than assuming that anything other than L,
q, t, or z implies an int argument.
at compile time regardless of the dynamic precision, and there's
no way to disable this misfeature at compile time. Hence, it's
impossible to generate the appropriate tables of constants for the
long double inverse trig functions in a straightforward way on i386;
this change hacks around the problem by encoding the underlying bits
in the table.
Note that these functions won't pass the regression test on i386,
even with the FPU set to extended precision, because the regression
test is similarly damaged by gcc. However, the tests all pass when
compiled with a modified version of gcc.
Reported by: bde
the first value (environ[0]) to NULL. This is in addition to the
current detection of environ being replaced, which includes being set to
NULL. Without this fix, the environment is not truly wiped, but appears
to be by getenv() until an *env() call is made to alter the enviroment.
This change is necessary to support those applications that use this
method for clearing environ such as Dovecot and Postfix. Applications
such as Sendmail and the base system's env replace environ (already
detected). While neither of these methods are defined by SUSv3, it is
best to support them due to historic reasons and in lieu of a clean,
defined method.
Add extra units tests for clearing environ using four different methods:
1. Set environ to NULL pointer.
2. Set environ[0] to NULL pointer.
3. Set environ to calloc()'d NULL-terminated array.
4. Set environ to static NULL-terminated array.
Noticed by: Timo Sirainen
MFC after: 3 days
- Adjust several constants for float precision. Some thresholds
that were appropriate for double precision were never changed
when these routines were converted to float precision. This
has an impact on performance but not accuracy. (Submitted by bde.)
- Reduce the degrees of the polynomials used. A smaller degree
suffices for float precision.
- In asinf(), use double arithmetic in part of the calculation to
avoid a corner case and some complicated arithmetic involving a
division and some buggy constants. This improves performance and
accuracy.
Max error (ulps):
asinf acosf atanf
before 0.925 0.782 0.852
after 0.743 0.804 0.852
As bde points out, it's cheaper for asin*() and acos*() to use
polynomials instead of rational functions, but that's a task for
another day.
spurious optimizations. gcc doesn't support FENV_ACCESS, so when it
folds constants, it assumes that the rounding mode is always the
default and floating point exceptions never matter.
I guess the original author of the popen() code didn't want to use our
<sys/queue.h> macro's, because the single linked list macro's didn't
offer O(1) deletion. Because I introduced SLIST_REMOVE_NEXT() some time
ago, we can now use the macro's here.
By converting the code to an SLIST, it is more consistent with other
parts of the C library and the operating system.
Reviewed by: csjp
Approved by: philip (mentor, implicit)
mkstemps(), and mkdtemp().
- Add proper range checking for the 'slen' parameter passed to mkstemps().
- Try all possible permutations of a template if a collision is encountered.
Previously, once a single template character reached 'z', it would not wrap
around to '0' and keep going until it encountered the original starting
letter. In the edge case that the randomly generated starting name used
all 'z' characters, only that single name would be tried before giving up.
PR: standards/66531
Submitted by: Jim Luther
Obtained from: Apple
MFC after: 1 week
It seems I made a small bug when writing some of the posix_spawn(3)
manpages. Remove the redundant "Ed Schouten", which broke the AUTHORS
section.
Approved by: philip (mentor, implicit)
"If you don't get a review within a day or two, I would firmly recommend
backing out the changes"
back out all my changes, i.e. not comes from merging from OpenBSD as
unreviewed by secteam@ yet.
(OpenBSD changes stays in assumption they are reviewd by OpenBSD)
Yes, it means some old bugs returned, like not setted rs_stired = 1 in
arc4random_stir(3) causing double stirring.
1) Unindent and sort variables.
2) Indent struct members.
3) Remove _packed, use guaranteed >128 bytes size and only first 128
bytes from the structure.
4) Reword comment.
Obtained from: bde
2) Use gettimeofday() and getpid() only if reading from /dev/urandom
fails or impossible.
3) Discard N bytes on very first initialization only (i.e. don't
discard on re-stir).
4) Reduce N from 1024 to 512 as really suggested in the
"(Not So) Random Shuffles of RC4" paper:
http://research.microsoft.com/users/mironov/papers/rc4full.pdf
2) Eliminate "struct arc4_stream *as" arg since only single arg is
possible.
3) Set rs.j = rs.i after arc4random key schedule to be more like arc4
stream cipher.
Obtained from: OpenBSD
the chunk map instead of red-black trees where possible. Remove the
red-black trees and node objects that are obsoleted by this change. The
net result is a ~1-2% memory savings, and a substantial allocation speed
improvement.
1. architecture-specific files
2. long double format-specific files
3. bsdsrc
4. src
5. man
The original order was virtually the opposite of this.
This should not cause any functional changes at this time. The
difference is only significant when one wants to override, say, a
generic foo.c with a more specialized foo.c (as opposed to foo.S).
This change removes the requirement that an ACL contain no ACL_USER
entries with a uid the same as those of a file, or ACL_GROUP entries
with a gid the same as those of a file. This requirement is not in the
specification, and not enforced by the kernel's ACL implementation.
Reported by: Iustin Pop <iusty at k1024 dot org>
MFC after: 1 week
- Fix a number of potential memory leaks in libgeom related to doing realloc
without freeing old pointer if things go wrong.
- Fix a number of places in libgeom where malloc and calloc return values
were not checked.
- Check malloc return value and provide sufficient warning messages when XML
parsing fails.
PR: kern/83464
Submitted by: Dan Lukes <dan - at - obluda.cz>
Approved by: kib (mentor)
statement. Add the one from the current NetBSD version.
- Also bump a date to reflect my content changes I have done in previous
revision
Approved by: imp
MFC after: 3 days
schedule a chmod() fixup for directories. In particular, this fixes
sgid handling on systems where the sgid bit is inherited from the
parent directory (which means that the actual mode of the dir
does not match the mode used in the mkdir() system call.
It may be possible to tighten this condition a bit. In
working through this, I also found a few other places where
it looks like we can avoid a redundant syscall or two. I've
commented those here but not yet tried to address them.
by moving the positional argument handling code to a new file,
printf-pos.c, and moving common definitions to printflocal.h.
No functional change intended.
In particular, encapsulate the state of the type table in a struct,
and add inline functions to initialize, free, and manipulate that
state. This replaces some ugly macros that made proper error handling
impossible.
While here, remove an unneeded test for NULL and a variable that is
initialized (many times!) but never used. The compiler didn't catch
these because of rampant use of the same variable to mean different
things in different places.
This commit should not cause any changes in functionality.
1. Save and restore the control part of the MXCSR in addition to the
i387 control word to ensure that the two are consistent.
Note that standards don't require longjmp to restore either control
word, and none of Linux, MacOS X 10.3 and earlier, NetBSD, OpenBSD,
or Solaris do it. However, it is historical FreeBSD behavior, and
bde points out that it is needed to make longjmping out of a signal
handler work properly, given the way FreeBSD clobbers the FPU state
on signal handler entry.
2. Don't clobber the FPU exception flags in longjmp. C99 requires them
to remain unchanged.
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.
Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
locked and unlocked completely in userland. by locking and unlocking mutex
in userland, it reduces the total time a mutex is locked by a thread,
in some application code, a mutex only protects a small piece of code, the
code's execution time is less than a simple system call, if a lock contention
happens, however in current implemenation, the lock holder has to extend its
locking time and enter kernel to unlock it, the change avoids this disadvantage,
it first sets mutex to free state and then enters kernel and wake one waiter
up. This improves performance dramatically in some sysbench mutex tests.
Tested by: kris
Sounds great: jeff
Adding exevpe() has caused some ports to break. Even though execvpe() is
a useful routine, it does not conform to any standards.
This patch is a little bit different from the patch sent to the mailing
list. I forgot to remove execvpe from the Symbol.map (which does not
seem to miscompile libc, though).
Reviewed by: davidxu
Approved by: philip
file into a separate file (instead of embedding it in the C code)
and use later timestamps (timestamps too close to the Epoch fail
predictably on systems that lack timegm(), whose mktime() doesn't
support dates before the Epoch and which are running in timezones
with negative offsets from GMT). The goal here is to test the ISO
extraction, not the local platform's time support.
operation) and not ARCHIVE_WARN, since we don't actually open the file.
Both bsdtar and bsdcpio will try to copy file contents after an ARCHIVE_WARN,
which will fail loudly.
The __use_pts() routine was once probably used by libutil to determine
if we are using BSD or UNIX98 style PTY device names. It doesn't seem to
be used outside grantpt.c, which means we can make it static and remove
it from the Symbol.map.
Reviewed by: cognet, kib
Approved by: philip (mentor)
can be used as replacements for exec/fork in a lot of cases. This
change also added execvpe() which allows environment variable
PATH to be used for searching executable file, it is used for
implementing posix_spawnp().
PR: standards/122051
sgtty was the original interface to configure terminal attributes on my
UNIX-like operating systems. It has been deprecated by the POSIX termios
interface, which is implemented in almost any modern system.
An advantage of turning this into a binary compatibility interface, is
that we can now eventually remove the COMPAT_43TTY switch from kernel
configurations. This removes many ioctl()'s from the TTY layer.
While there, increase the __FreeBSD_version, which may be useful for the
people working on the Ports tree.
Reviewed by: kib
Approved by: philip (mentor)
SO_LISTENQLEN SO_LISTENINCQLEN to the manual page.
Till now those were only present in sys/socket.h file.
Reviewed by: rwatson, gnn, keramida (with mdoc hat)
feedback, but the 2.5 branch is shaping up nicely.)
In addition to many small bug fixes and code improvements:
* Another iteration of versioning; I think I've got it right now.
* Portability: A lot of progress on Windows support (though I'm
not committing all of the Windows support files to FreeBSD CVS)
* Explicit tracking of MBS, WCS, and UTF-8 versions of strings
in archive_entry; the archive_entry routines now correctly return
NULL only when something is unset, setting NULL properly clears
string values. Most charset conversions have been pushed down to
archive_string.
* Better handling of charset conversion failure when writing or
reading UTF-8 headers in pax archives
* archive_entry_linkify() provides multiple strategies for
hardlink matching to suit different format expectations
* More accurate bzip2 format detection
* Joerg Sonnenberger's extensive improvements to mtree support
* Rough support for self-extracting ZIP archives. Not an ideal
approach, but it works for the archives I've tried.
* New "sparsify" option in archive_write_disk converts blocks of nulls
into seeks.
* Better default behavior for the test harness; it now reports
all failures by default instead of coredumping at the first one.
similar to _WANT_UCRED and _WANT_PRISON and seems to be much nicer than
defining _KERNEL.
It is also needed for my sys/refcount.h change going in soon.
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
While we're here, fix a long-standing bug in the handling of write(2)
errors: The API changed from "return # of bytes written" to "return
status code" almost 4 years ago, so instead of returning (-1) we need
to return ARCHIVE_FATAL.
Found by: Coverity Prevent [1]
declaring a variable which points to it. Aside from eliminating a
line of code and one level of unnecessary indirection, this eliminates
a false positive in Coverity.
These will be fleshed out as part of the DTrace userland tracing
development.
For now, the kernel tracing part of DTrace requires minimal functionality
for this library.
The API for this library is deliberately different from the libproc in
OpenSolaris due to licensing restrictions.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
PR:
Reviewed by: several including rwatson, bz and mlair (parts each)
Approved by:
Obtained from: Ironport systems/Cisco
MFC after:
Security:
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
Security:
header is now in two parts: bsdxml.h and bsdxml_external.h, representing
the expat.h and expat_external.h headers. Updated the info on the man
page as well. Also, fixed a type-error in a printf in
sbin/ifconfig/regdomain.c that would cause a compiler warning.
Approved by: sam, phk
files after a seekdir().
The seekdir shall set the position for the next readdir operation.
When the _readdir_unlocked() encounters deleted entry, dd_loc is
already advanced. Continuing the loop leads to premature read of
the target entry.
Submitted by: Marc Balmer <mbalmer at openbsd org>
Obtained from: OpenBSD
MFC after: 2 weeks
accessor functions for its benefit now thaat FILE is opaque.
I'm sure there's a better way. I leave that for people to work
on in a src tree that isn't broken.
Pointy hat: jhb
move the definition of the type backing FILE (struct __sFILE) into an
internal header.
- Remove macros to inline certain operations from stdio.h. Applications
will now always call the functions instead.
- Move the various foo_unlocked() functions from unlocked.c into foo.c.
This lets some of the inlining macros (e.g. __sfeof()) move into
foo.c.
- Update a few comments.
- struct __sFILE can now go back to using mbstate_t, pthread_t, and
pthread_mutex_t instead of knowing about their private, backing types.
MFC after: 1 month
Reviewed by: kan
This substantially improves worst case allocation performance, since
O(lg n) tree search can be used instead of O(n) tree iteration.
Use rb_wrap() instead of directly calling rb_*() macros.
macros.
Add rb_foreach_next() and rb_foreach_reverse_prev(), which make it
possible to re-synchronize tree iteration after the tree has been
modified.
Rename rb_tree_new() to rb_new().
color bit in the least significant bit of the right child pointer, in
order to reduce red-black tree linkage overhead by ~2X as compared to
sys/tree.h.
Use the new red-black tree implementation in malloc, which drops
memory usage by ~0.5 or ~1%, for 32- and 64-bit systems, respectively.
after similar calls related to struct pwd in libutil/pw_util.c:
- gr_equal()
Perform a deep comparison of two struct grp's. It does a thorough, yet
unoptimized comparison of all the members regardless of order.
- gr_make()
Create a string (see group(5)) from a struct grp.
- gr_dup()
Duplicate a struct grp. Returns a value that is a single contiguous
block of memory.
- gr_scan()
Create a struct grp from a string (as produced by gr_make()).
MFC after: 3 weeks
There were no checks for left and right precisions at all, and
a check for field width had integer overflow bug.
Reported by: Maksymilian Arciemowicz
Security: http://securityreason.com/achievement_securityalert/53
Submitted by: Maxim Dounin <mdounin@mdounin.ru>
MFC after: 3 days
__sFILE. This was supposed to be done in 6.0. Some notes:
- Where possible I restored the various lines to their pre-__sFILEX state.
- Retire INITEXTRA() and just initialize the wchar bits (orientation and
mbstate) explicitly instead. The various places that used INITEXTRA
didn't need the locking fields or _up initialized. (Some places needed
_up to exist and not be off the end of a NULL or garbage pointer, but
they didn't require it to be initialized to a specific value.)
- For now, stdio.h "knows" that pthread_t is a 'struct pthread *' to
avoid namespace pollution of including all the pthread types in stdio.h.
Once we remove all the inlines and make __sFILE private it can go back
to using pthread_t, etc.
- This does not remove any of the inlines currently and does not change
any of the public ABI of 'FILE'.
MFC after: 1 month
Reviewed by: peter
deals with the usual __opendir2() calls, and the rest part with an interface
translator to expose fdopendir(3) functionality. Manual page was obtained from
kib@'s work for *at(2) system calls.
counted in the width specification in scanf.
This is not a security problem, since this function is only used to
parse a user's configuration file.
Submitted by: Joerg Sonnenberger
Obtained from: dragonflybsd
MFC after: 1 week
1. Previously, printing the number 1.0 could produce 0x1p+0, 0x2p-1,
0x4p-2, or 0x8p-3, depending on what happened to be convenient. This
meant that printing a value as a double and printing the same value
as a long double could produce different (but equivalent) results.
The change is to always make the leading digit a 1, unless the
number is 0. This solves the aforementioned problem and has
several other advantages.
2. Use the FPU to do rounding. This is far simpler and more portable
than manipulating the bits, and it fixes an obsure round-to-even
bug. It also raises the exceptions now required by IEEE 754R.
The drawbacks are that it is usually slightly slower, and it makes
printf less effective as a debugging tool when the FPU is hosed
(e.g., due to a buggy softfloat implementation).
3. On i386, twiddle the rounding precision so that (2) works properly
for long doubles.
4. Make several simplifications that are now possible due to (2).
5. Split __hldtoa() into a separate file.
Thanks to remko for access to a sparc64 box for testing.
flags appropriately. The next step is to make it raise a SIGFPE if
any exceptions are unmasked.
Thanks to remko for access to a sparc64 box for testing.
- fma(x, y, z) returns z, not NaN, if z is infinite, x and y are finite,
x*y overflows, and x*y and z have opposite signs.
- fma(x, y, z) doesn't generate an overflow, underflow, or inexact exception
if z is NaN or infinite, as per IEEE 754R.
- If the rounding mode is set to FE_DOWNWARD, fma(1.0, 0.0, -0.0) is -0.0,
not +0.0.
returns errno, because errno can be mucked by user's signal handler and
most of pthread api heavily depends on errno to be correct, this change
should improve stability of the thread library.
This makes little difference in float precision, but in double
precision gives a speedup of about 30% on amd64 (A64 CPU) and i386
(A64). This depends on fabs[f]() being inline and efficient. The
bit fiddling (or any use of SET_HIGH_WORD(), which libm does too
much because it was best on old 32-bit machines) always causes
packing overheads and sometimes causes stalls in the packing, since
it operates on only part of a variable in the double precision case.
It apparently did cause stalls in a critical path here.
fabs(x+0.0)+fabs(y+0.0) when mixing NaNs. This improves
consistency of the result by making it harder for the compiler to reorder
the operands. (FP addition is not necessarily commutative because the
order of operands makes a difference on some machines iff the operands are
both NaNs.)
__xdrrec_getrec has returned TRUE, then we have a complete request in
the buffer - calling xdrrec_skiprecord is not necessary. In particular,
if there is another record already buffered on the stream,
xdrrec_skiprecord will discard both this request and the next
one, causing the call to xdr_callmsg to fail and the stream to be
closed.
Sponsored by: Isilon Systems
live in libm, while modf() lives in libc due to historical
mistakes. I'm claiming in the manpage that they all live in libm,
since programmers should not rely on the mistake.
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
section header entry if the application is not taking charge of ELF
object layout.
Update (c) years, and bump the manual page's date.
Submitted by: kaiw
(NAP, GN and PANU). No reason to not to support them.
Separate SDP parameters data structures for the BNEP based profiles.
Generalize Service Availability SDP parameter creation.
Requested by: Iain Hibbert < plunky at rya-online dot net >
MFC after: 3 days
_thr_suspend_check() which messes sigmask saved in thread structure.
- Don't suspend a thread has force_exit set.
- In pthread_exit(), if there is a suspension flag set, wake up waiting-
thread after setting PS_DEAD, this causes waiting-thread to break loop
in suspend_common().
of the array length needed to store all the directory entries.
Although BSD has historically guaranteed that st_size is the size
of the directory file, POSIX does not, and more to the point, some
recent filesystems such as ZFS use st_size to mean something else.
The fix is to not stat the directory at all, set the initial
array size to 32 entries, and realloc it in powers of 2 if that
proves insufficient.
PR: 113668
from the private archive_write structure and fix up all writers to use
the format fields in the base "archive" structure. This error made it
impossible to query the format after setting up a writer because the
write format was stored in an inaccessible place.
"file" is described by multiple "lines" each possibly containing
multiple "keywords." Incorporate some additions from Joerg Sonnenberger
to handle linked files and correctly deal with backing files on disk.
Disable the use of PaxHeader.<pid> for the fake pax extension pathname
until I can make the name here settable. Otherwise, tests that try
to compare output to static pre-generated reference files break.
(including pathname, gname, uname) be stored in UTF-8. This usually
doesn't cause problems on FreeBSD because the "C" locale on FreeBSD
can convert any byte to Unicode/wchar_t and from there to UTF-8. In
other locales (including the "C" locale on Linux which is really
ASCII), you can get into trouble with pathnames that cannot be
converted to UTF-8.
Libarchive's pax writer truncated pathnames and other strings at the
first nonconvertible character. (ouch!) Other archivers have worked
around this by storing unconvertible pathnames as raw binary, a
practice which has been sanctioned by the Austin group. However,
libarchive's pax reader would segfault reading headers that weren't
proper UTF-8. (ouch!) Since bsdtar defaults to pax format, this
affects bsdtar rather heavily.
To correctly support the new "hdrcharset" header that is going into
SUS and to handle conversion failures in general, libarchive's pax reader
and writer have been overhauled fairly extensively. They used to do
most of the pax header processing using wchar_t (Unicode); they now do
most of it using char so that common logic applies to either UTF-8 or
"binary" strings.
As a bonus, a number of extraneous conversions to/from wchar_t have
been eliminated, which should speed things up just a tad.
Thanks to: Bjoern Jacke for originally reporting this to me
Thanks to: Joerg Sonnenberger for noting a bad typo in my first draft of this
Thanks to: Gunnar Ritter for getting the standard fixed
MFC after: 5 days
rely on a deprecated value to set the default. This is also
related to a longer-term goal of setting the default block
size based on format and possibly other factors, which makes
it a bad idea to tie this to a published constant.
new interface. Mark the functions that are going away in
libarchive 3.0.
In particular, archive_version_string() now computes the
string rather than assuming that it will be created by the
build infrastructure. Eventually, this will allow some
simplification of the build infrastructure.
* There are now only two public version identifiers: "number" is
a single integer that combines Major/minor/release in a single
value of the form Mmmmrrr. This is easy to compare against for
checking feature support. "string" is a displayable text string
of the form "libarchive M.mm.rr".
* The number is present both as a macro (version of the installed header)
and a function (version of the shared library). The string form
is available only as a function.
* Retain the older version definitions for now, but mark them all
as deprecated, to disappear in libarchive 3.0 (whenever that happens).
* Rework the various deprecation conditionals to use ARCHIVE_VERSION_NUMBER.
An ancillary goal is to reduce the number of @...@ substitutions that
are required. Someday, I might even be able to avoid build-time
processing of archive.h entirely.
Remove the entirely pointless symbolic constant
and sizeof(unsigned char). (The constant
here is doubly wrong, since not only does
it obscure a basic format constant, it was
never intended to be a tar-specific value,
so could conceivably be changed at some point
in the future.)
filename table whose size is less than 65536 bytes.
The original intention was to not consume the filename table, so the
client will have a chance to look at it. To achieve that, the library
call decompressor->read_ahead to read(look ahead) but do not call
decompressor->consume to consume the data, thus a limit was raised
since read_ahead call can only look ahead at most BUFFER_SIZE(65536)
bytes at the moment, and you can not "look any further" before you
consume what you already "saw".
This commit will turn GNU/SVR4 filename table into "archive format
data", i.e., filename table will be consumed by libarchive, so the
65536-bytes limit will be gone, but client can no longer have access
to the content of filename table.
'ar' support test suite is changed accordingly. BSD ar(1) is not
affected by this change since it doesn't look at the filename table.
Reported by: erwin
Discussed with: jkoshy, kientzle
Reviewed by: jkoshy, kientzle
Approved by: jkoshy(mentor), kientzle
uudecode into the main test driver and invoking it just-in-time
within the various tests.
Also, incorporate a number of improvements to the main test support
code that have proven useful on other projects where I've used this
framework.
(left over from when the unified read/write structure was copied
to form separate read and write structures) and eliminate the
pointless initialization of a couple of the unused fields.
Solaris and AIX.
fcntl(fd, F_DUP2FD, arg) and dup2(fd, arg) are functionnaly equivalent.
Document it.
Add some regression tests (identical to the dup2(2) regression tests).
PR: 120233
Submitted by: Jukka Ukkonen
Approved by: rwaston (mentor)
MFC after: 1 month
Significant changes:
- rev. 1.11: Use PRId64 instead of a cast to long long and %lld to print
an int64_t.
- rev. 1.12: Fix a bug that humanize_number() produces "1000" where it
should be "1.0G" or "1.0M". The bug reported by Greg Troxel.
PR: 118461
PR: 102694
Approved by: rwatson (mentor)
Obtained from: NetBSD
MFC after: 1 month
that there might be starvations, but because we have already locked the
thread, the cpuset settings will always be done before the new thread
does real-world work.
we set scheduling parameters and cpu binding fully in userland, and
because default scheduling policy is SCHED_RR (time-sharing), we set
default sched_inherit to PTHREAD_SCHED_INHERIT, this saves a system
call.
however if current thread is executing cancellation handler, signal
SIGCANCEL may have already been blocked, this is unexpected, unblock the
signal in new thread if this happens.
MFC after: 1 week
and assignment.
- Add a reference to a struct cpuset in each thread that is inherited from
the thread that created it.
- Release the reference when the thread is destroyed.
- Add prototypes for syscalls and macros for manipulating cpusets in
sys/cpuset.h
- Add syscalls to create, get, and set new numbered cpusets:
cpuset(), cpuset_{get,set}id()
- Add syscalls for getting and setting affinity masks for cpusets or
individual threads: cpuid_{get,set}affinity()
- Add types for the 'level' and 'which' parameters for the cpuset. This
will permit expansion of the api to cover cpu masks for other objects
identifiable with an id_t integer. For example, IRQs and Jails may be
coming soon.
- The root set 0 contains all valid cpus. All thread initially belong to
cpuset 1. This permits migrating all threads off of certain cpus to
reserve them for special applications.
Sponsored by: Nokia
Discussed with: arch, rwatson, brooks, davidxu, deischen
Reviewed by: antoine
e_rem_pio2.c:
This case goes up to about 2**20pi/2, but the comment about it said that
it goes up to about 2**19pi/2.
It went too far above 2**pi/2, giving a multiplier fn with 21 significant
bits in some cases. This would be harmful except for a numerical
accident. It happens that the terms of the approximation to pi/2,
when rounded to 33 bits so that multiplications by 20-bit fn's are
exact, happen to be rounded to 32 bits so multiplications by 21-bit
fn's are exact too, so the bug only complicates the error analysis (we
might lose a bit of accuracy but have bits to spare).
e_rem_pio2f.c:
The bogus comment in e_rem_pio2.c was copied and the code was changed
to be bug-for-bug compatible with it, except the limit was made 90
ulps smaller than necessary. The approximation to pi/2 was not
modified except for discarding some of it.
The same rough error analysis that justifies the limit of 2**20pi/2
for double precision only justifies a limit of 2**18pi/2 for float
precision. We depended on exhaustive testing to check the magic numbers
for float precision. More exaustive testing shows that we can go up
to 2**28pi/2 using a 53+25 bit approximation to pi/2 for float precision,
with a the maximum error for cosf() and sinf() unchanged at 0.5009
ulps despite the maximum error in rem_pio2f being ~0.25 ulps. Implement
this.
This reduces the size of a statically-linked binary by approximately 100KB
in a trivial "return (0)" test application. readelf -S was used to verify
that the .text section was reduced and that using strlen() saved a few
more bytes over using sizeof(). Since the section of code is only called
when environ is corrupt (program bug), I went with fewer bytes over fewer
cycles.
I made minor edits to the submitted patch to make the output resemble
warnx().
Submitted by: kib bz
Approved by: wes (mentor)
MFC after: 5 days
them. Thus, any fd whose value is greater than SHRT_MAX is handled
incorrectly (the short value is sign-extended when converted to an int).
An unpleasant side effect is that if fopen() opens a file and gets a
backing fd that is greater than SHRT_MAX, fclose() will fail and the file
descriptor will be leaked. Better handle this by fixing fopen(), fdopen(),
and freopen() to fail attempts to use a fd greater than SHRT_MAX with
EMFILE.
At some point in the future we should look at expanding the file descriptor
in FILE to an int, but that is a bit complicated due to ABI issues.
MFC after: 1 week
Discussed on: arch
Reviewed by: wollman
{SHRT_MAX}, so {STREAM_MAX} should be no greater than that. (This
does not exactly meet the letter of POSIX but comes reasonably close
to it in spirit.)
MFC after: 14 days
gives an average speedup of about 12 cycles or 17% for
9pi/4 < |x| <= 2**19pi/2 and a smaller speedup for larger x, and a
small speeddown for |x| <= 9pi/4 (only 1-2 cycles average, but that
is 4%).
Inlining this is less likely to bust caches than inlining the float
version since it is much smaller (about 220 bytes text and rodata) and
has many fewer branches. However, the float version was already large
due to its manual inlining of the branches and also the polynomial
evaluations.
__kernel_rem_pio2(). This simplifies analysis of aliasing and thus
results in better code for the usual case where __kernel_rem_pio2()
is not called. In particular, when __ieee854_rem_pio2[f]() is inlined,
it normally results in y[] being returned in registers. I couldn't
get this to work using the restrict qualifier.
In float precision, this saves 2-3% in most cases on amd64 and i386
(A64) despite it not being inlined in float precision yet. In double
precision, this has high variance, with an average gain of 2% for
amd64 and 0.7% for i386 (but a much larger gain for usual cases) and
some losses.
this function and its callers cosf(), sinf() and tanf() don't waste time
converting values from doubles to floats and back for |x| > 9pi/4.
All these functions were optimized a few years ago to mostly use doubles
internally and across the __kernel*() interfaces but not across the
__ieee754_rem_pio2f() interface.
This saves about 40 cycles in cosf(), sinf() and tanf() for |x| > 9pi/4
on amd64 (A64), and about 20 cycles on i386 (A64) (except for cosf()
and sinf() in the upper range). 40 cycles is about 35% for |x| < 9pi/4
<= 2**19pi/2 and about 5% for |x| > 2**19pi/2. The saving is much
larger on amd64 than on i386 since the conversions are not easy to
optimize except on i386 where some of them are automatic and others
are optimized invalidly. amd64 is still about 10% slower in cosf()
and tanf() in the lower range due to conversion overhead.
This also gives a tiny speedup for |x| <= 9pi/4 on amd64 (by simplifying
the code). It also avoids compiler bugs and/or additional slowness
in the conversions on (not yet supported) machines where double_t !=
double.
e_rem_pio2.c:
Float and double precision didn't work because init_jk[] was 1 too small.
It needs to be 2 larger than you might expect, and 1 larger than it was
for these precisions, since its test for recomputing needs a margin of
47 bits (almost 2 24-bit units).
init_jk[] seems to be barely enough for extended and quad precisions.
This hasn't been completely verified. Callers now get about 24 bits
of extra precision for float, and about 19 for double, but only about
8 for extended and quad. 8 is not enough for callers that want to
produce extra-precision results, but current callers have rounding
errors of at least 0.8 ulps, so another 1/2**8 ulps of error from the
reduction won't affect them much.
Add a comment about some of the magic for init_jk[].
e_rem_pio2.c:
Double precision worked in practice because of a compensating off-by-1
error here. Extended precision was asked for, and it executed exactly
the same code as the unbroken double precision.
e_rem_pio2f.c:
Float precision worked in practice because of a compensating off-by-1
error here. Double precision was asked for, and was almost needed,
since the cosf() and sinf() callers want to produce extra-precision
results, at least internally so that their error is only 0.5009 ulps.
However, the extra precision provided by unbroken float precision is
enough, and the double-precision code has extra overheads, so the
off-by-1 error cost about 5% in efficiency on amd64 and i386.
variations (e500 currently), this provides a gcc-level FPU emulation and is an
alternative approach to the recently introduced kernel-level emulation
(FPU_EMU).
Approved by: cognet (mentor)
MFp4: e500
fabs(), a conditional branch, and sign adjustments of 3 variables for
x < 0 when the branch is taken. In double precision, even when the
branch is perfectly predicted, this saves about 10 cycles or 10% on
amd64 (A64) and i386 (A64) for the negative half of the range, but
makes little difference for the positive half of the range. In float
precision, it also saves about 4 cycles for the positive half of the
range on i386, and many more cycles in both halves on amd64 (28 in the
negative half and 11 in the positive half for tanf), but the amd64
times for float precision are anomalously slow so the larger
improvement is only a side effect.
Previous commits arranged for the x < 0 case to be handled simply:
- one part of the rounding method uses the magic number 0x1.8p52
instead of the usual 0x1.0p52. The latter is required for large |x|,
but it doesn't work for negative x and we don't need it for large |x|.
- another part of the rounding method no longer needs to add `half'.
It would have needed to add -half for negative x.
- removing the "quick check no cancellation" in the double precision
case removed the need to take the absolute value of the quadrant
number.
Add my noncopyright in e_rem_pio2.c
FP-to-FP method to round to an integer on all arches, and convert this
to an int using FP-to-integer conversion iff irint() is not available.
This is cleaner and works well on at least ia64, where it saves 20-30
cycles or about 10% on average for 9Pi/4 < |x| <= 32pi/2 (should be
similar up to 2**19pi/2, but I only tested the smaller range).
After the previous commit to e_rem_pio2.c removed the "quick check no
cancellation" non-optimization, the result of the FP-to-integer
conversion is not needed so early, so using irint() became a much
smaller optimization than when it was committed.
An earlier commit message said that cos, cosf, sin and sinf were equally
fast on amd64 and i386 except for cos and sin on i386. Actually, cos
and sin on amd64 are equally fast to cosf and sinf on i386 (~88 cycles),
while cosf and sinf on amd64 are not quite equally slow to cos and sin
on i386 (average 115 cycles with more variance).
9pi/2 < |x| < 32pi/2 since it is only a small or negative optimation
and it gets in the way of further optimizations. It did one more
branch to avoid some integer operations and to use a different
dependency on previous results. The branches are fairly predictable
so they are usually not a problem, so whether this is a good
optimization depends mainly on the timing for the previous results,
which is very machine-dependent. On amd64 (A64), this "optimization"
is a pessimization of about 1 cycle or 1%; on ia64, it is an
optimization of about 2 cycles or 1%; on i386 (A64), it is an
optimization of about 5 cycles or 4%; on i386 (Celeron P2) it is an
optimization of about 4 cycles or 3% for cos but a pessimization of
about 5 cycles for sin and 1 cycle for tan. I think the new i386
(A64) slowness is due to an pipeline stall due to an avoidable
load-store mismatch (so the old timing was better), and the i386
(Celeron) variance is due to its branch predictor not being too good.
the the double to int conversion operation which is very slow on these
arches. Assume that the current rounding mode is the default of
round-to-nearest and use rounding operations in this mode instead of
faking this mode using the round-towards-zero mode for conversion to
int. Round the double to an integer as a double first and as an int
second since the double result is needed much earler.
Double rounding isn't a problem since we only need a rough approximation.
We didn't support other current rounding modes and produce much larger
errors than before if called in a non-default mode.
This saves an average about 10 cycles on amd64 (A64) and about 25 on
i386 (A64) for x in the above range. In some cases the saving is over
25%. Most cases with |x| < 1000pi now take about 88 cycles for cos
and sin (with certain CFLAGS, etc.), except on i386 where cos and sin
(but not cosf and sinf) are much slower at 111 and 121 cycles respectivly
due to the compiler only optimizing well for float precision. A64
hardware cos and sin are slower at 105 cycles on i386 and 110 cycles
on amd64.
the same as lrint() except it returns int instead of long. Though the
extern lrint() is fairly fast on these arches, it still takes about
12 cycles longer than the inline version, and 12 cycles is a lot in
applications where [li]rint() is used to avoid slow conversions that
are only a couple of times slower.
This is only for internal use. The libm versions of *rint*() should
also be inline, but that would take would take more header engineering.
Implementing irint() instead of lrint() also avoids a conflict with
the extern declaration of the latter.
on i386 (A64), 5 cycles on amd64 (A64), and 3 cycles on ia64). gcc
tends to generate very bad code for accessing floating point values
as bits except when the integer accesses have the same width as the
floating point values, and direct accesses to bit-fields (as is common
only for long double precision) always gives such accesses. Use the
expsign access method, which is good for 80-bit long doubles and
hopefully no worse for 128-bit long doubles. Now the generated code
is less bad. There is still unnecessary copying of the arg on amd64
and i386 and mysterious extra slowness on amd64.
pi/4 <= |x| <= 3pi/4. Use the same branch ladder as for float precision.
Remove the optimization for |x| near pi/2 and don't do it near the
multiples of pi/2 in the newly optimized range, since it requires
fairly large code to handle only relativley few cases. Ifdef out
optimization for |x| <= pi/4 since this case can't occur because it
is done in callers.
On amd64 (A64), for cos() and sin() with uniformly distributed args,
no cache misses, some parallelism in the caller, and good but not great
CC and CFLAGS, etc., this saves about 40 cycles or 38% in the newly
optimized range, or about 27% on average across the range |x| <= 2pi
(~65 cycles for most args, while the A64 hardware fcos and fsin take
~75 cycles for half the args and 125 cycles for the other half). The
speedup for tan() is much smaller, especially relatively. The speedup
on i386 (A64) is slightly smaller, especially relatively. i386 is
still much slower than amd64 here (unlike in the float case where it
is slightly faster).
saves an average of about 8 cycles or 5% on A64 (amd64 and i386 --
more in cycles but about the same percentage on i386, and more with
old versions of gcc) with good CFLAGS and some parallelism in the
caller. As usual, it takes a couple more multiplications so it will
be slower on old machines.
Convert to __FBSDID().
Maybe. In the meantime, my workarounds for trying to coax UTC without
timegm() are getting uglier and uglier. Apparently, some systems
don't support setenv()/unsetenv(), so you can't set the TZ env var and
hope thereby to coax mktime() into generating UTC. Without that, I
don't see a really good alternative to just giving up and converting to
localtime with mktime(). (I suppose I should research the Perl library
approach for computing an inverse function to gmtime(); that might
actually be simpler than this growing list of hacks.)
now returns a value, which supports such convenient
constructs as:
if (assert(NULL != foo())) {
}
Also be careful to setlocale("C") for each new test to
avoid locale pollution.
Also a couple of minor portability enhancements.
* If the platform can't restore char nodes, block nodes, or fifos,
don't try and just return error.
* Include O_BINARY in most open() calls (define O_BINARY to 0 if the
platform doesn't provide a definition already)
* Refactor the ownership restore to more cleanly support platforms
that don't have any form of {l,f,}chown() call.
* Comment a lingering issue with older Unix-like systems that allow
root to hose the filesystem. I don't (yet) have a good solution for
this, but I expect it will require adding more redundant stat()
calls. <sigh>
MFC after: 14 days
optimization of about 10% for cos(x), sin(x) and tan(x) on
|x| < 2**19*pi/2. We didn't do this before because __ieee754__rem_pio2()
is too large and complicated for gcc-3.3 to inline very well. We don't
do this for float precision because it interferes with optimization
of the usual (?) case (|x| < 9pi/4) which is manually inlined for float
precision only.
This has some rough edges:
- some static data is duplicated unnecessarily. There isn't much after
the recent move of large tables to k_rem_pio2.c, and some static data
is duplicated to good affect (all the data static const, so that the
compiler can evaluate expressions like 2*pio2 at compile time and
generate even more static data for the constant for this).
- extern inline is used (for the same reason as in previous inlining of
k_cosf.c etc.), but C99 apparently doesn't allow extern inline
functions with static data, and gcc will eventually warn about this.
Convert to __FBSDID().
Indent __ieee754_rem_pio2()'s declaration consistently (its style was
made inconsistent with fdlibm a while ago, so complete this).
Fix __ieee754_rem_pio2()'s return type to match its prototype. Someone
changed too many ints to int32_t's when fixing the assumption that all
ints are int32_t's.
reallocation, when junk filling is enabled. Junk filling must occur
prior to shrinking, since any deallocated trailing pages are immediately
available for use by other threads.
Reported by: Mats Palmgren <mats.palmgren@bredband.net>
allocation patterns, number of CPUs, and MALLOC_OPTIONS settings indicate
that lazy deallocation has the potential to worsen throughput dramatically.
Performance degradation occurs when multiple threads try to clear the lazy
free cache simultaneously. Various experiments to avoid this bottleneck
failed to completely solve this problem, while adding yet more complexity.
Bruce for putting lots of effort into these; getting them right isn't
easy, and they went through many iterations.
Submitted by: Steve Kargl <sgk@apl.washington.edu> with revisions from bde
is a violation of RFC 1034 [STD 13], it is accepted by certain name servers
as well as other popular operating systems' resolver library.
Bugs are mine.
Obtained from: ume
MFC after: 2 weeks
of disk names, where you must free each pointer, as well as the array
by hand. [1]
- Destaticize "disks" in Disk_Names, it has no reasons to be static.
PR: kern/96077 [1]
PR: kern/114110 [1]
MFC after: 1 month
Approved by: rwatson (mentor)
|x| or |y| and b is |y| or |x|) when mixing NaN arg(s).
hypot*() had its own foot shooting for mixing NaNs -- it swaps the
args so that |x| in bits is largest, but does this before quieting
signaling NaNs, so on amd64 (where the result of adding NaNs depends
on the order) it gets inconsistent results if setting the quiet bit
makes a difference, just like a similar ia64 and i387 hardware comparison.
The usual fix (see e_powf.c 1.13 for more details) of mixing using
(a+0.0)+-(b+0.0) doesn't work on amd64 if the args are swapped (since
the rder makes a difference with SSE). Fortunately, the original args
are unchanged and don't need to be swapped when we let the hardware
decide the mixing after quieting them, but we need to take their
absolute value.
hypotf() doesn't seem to have any real bugs masked by this non-bug.
On amd64, its maximum error in 2^32 trials on amd64 is now 0.8422 ulps,
and on i386 the maximum error is unchanged and about the same, except
with certain CFLAGS it magically drops to 0.5 (perfect rounding).
Convert to __FBSDID().
be into 12+24 bits of precision for extra-precision multiplication,
but was into 13+24 bits. On i386 with -O1 the bug was hidden by
accidental extra precision, but on amd64, in 2^32 trials the bug
caused about 200000 errors of more than 1 ulp, with a maximum error
of about 80 ulps. Now the maximum error in 2^32 trials on amd64
is 0.8573 ulps. It is still 0.8316 ulps on i386 with -O1.
The nearby decomposition of 1/ln2 and the decomposition of 2/(3ln2) in
the double precision version seem to be sub-optimal but not broken.
This uses 2 tricks to improve consistency so that more serious problems
aren't hidden in simple regression tests by noise for the NaNs:
- for a signaling NaN, adding 0.0 generates the invalid exception and
converts to a quiet NaN, and doesn't have too many effects for other
types of args (it converts -0 to +0 in some rounding modes, but that
hopefully doesn't change the result after adding the NaN arg). This
avoids some inconsistencies on i386 and ia64. On these arches, the
result of an operation on 2 NaNs is apparently the largest or the
smallest of the NaNs as bits (consistently largest or smallest for
each arch, but the opposite). I forget which way the comparison
goes and if the sign bit affects it. The quiet bit is is handled
poorly by not always setting it before the comparision or ignoring
it. Thus if one of the args was originally a signaling NaN and the
other was originally a quiet NaN, then the result depends too much
on whether the signaling NaN has been quieted at this point, which
in turn depends on optimizations and promotions. E.g., passing float
signaling NaNs to double functions must quiet them on conversion;
on i387, loading a signaling NaN of type float or double (but not
long double) into a register involves a conversion, so it quiets
signaling NaNs, so if the addition has 2 register operands than it
only sees quiet NaNs, but if the addition has a memory operand then
it sees a signaling NaN iff it is in the memory operand.
- subtraction instead of addition is used to avoid a dubious optimization
in old versions of gcc. For SSE operations, mixing of NaNs apparently
always gives the target operand. This is not as good as the i387
and ia64 behaviour. It doesn't mix NaNs at all, and makes addition
not quite commutative. Old versions of gcc sometimes rewrite x+y
to y+x and thus give different results (in bits) for NaNs. gcc-3.3.3
rewrites x+y to y+x for one of pow() and powf() but not the other,
so starting from float NaN args x and y, powf(x, y) was almost always
different from pow(x, y).
These tricks won't give consistency of 2-arg float and double functions
with long double ones on amd64, since long double ones use the i387
which has different semantics from SSE.
Convert to __FBSDID().
and trunc() to the corresponding long double functions. This is not
just an optimization for these arches. The full long double functions
have a wrong value for `huge', and the arches without full long doubles
depended on it being wrong.
This has the side effect of confusing gcc-4.2.1's optimizer into more
often doing the right thing. When it does the wrong thing here, it
seems to be mainly making too many copies of x with dependency chains.
This effect is tiny on amd64, but in some cases on i386 it is enormous.
E.g., on i386 (A64) with -O1, the current version of exp2() should
take about 50 cycles, but took 83 cycles before this change and 66
cycles after this change. exp2f() with -O1 only speeded up from 51
to 47 cycles. (exp2f() should take about 40 cycles, on an Athlon in
either i386 or amd64 mode, and now takes 42 on amd64). exp2l() with
-O1 slowed down from 155 cycles to 123 for some args; this is unimportant
since the i386 exp2l() is a fake; the wrong thing for it seems to
involve branch misprediction.
faster on all machines tested (old Celeron (P2), A64 (amd64 and i386)
and ia64) except on ia64 when compiled with -O1. It takes 2 more
multiplications, so it will be slower on old machines. The speedup
is about 8 cycles = 17% on A64 (amd64 and i386) with best CFLAGS
and some parallelism in the caller.
Move the evaluation of 2**k up a bit so that it doesn't compete too
much with the new polynomial evaluation. Unlike the previous
optimization, this rearrangement cannot change the result, so compilers
and CPU schedulers can do it, but they don't do it quite right yet.
This saves a whole 1 or 2 cycles on A64.
when the result is +-0. IEEE754 requires (in all rounding modes) that
if the result is +-0 then its sign is the same as that of the first
arg, but in round-towards-minus-infinity mode an uncorrected implementation
detail always reversed the sign. (The detail is that x-x with x's
sign positive gives -0 in this mode only, but the algorithm assumed
that x-x always has positive sign for such x.)
remquo() and remquof() seem to need the same fix, but I cannot test them
yet.
Use long doubles when mixing NaN args. This trick improves consistency
of results on at least amd64, so that more serious problems like the
above aren't hidden in simple regression tests by noise for the NaNs.
On amd64, hardware remainder should be used since it is about 10 times
faster than software remainder and is already used for remquo(), but
it involves using the i387 even for floats and doubles, and the i387
does NaN mixing which is better than but inconsistent with SSE NaN mixing.
Software remainder() would probably have been inconsistent with
software remainderl() for the same reason if the latter existed.
Signaling NaNs cause further inconsistencies on at least ia64 and i386.
Use __FBSDID().
exp2(i/TBLSIZE) * p(z) instead of only for the final multiplication
and addition. This fixes the code to match the comment that the maximum
error is 0.5010 ulps (except on machines that evaluate float expressions
in extra precision, e.g., i386's, where the evaluation was already
in extra precision).
Fix and expand the comment about use of double precision.
The relative roundoff error from evaluating p(z) in non-extra precision
was about 16 times larger than in exp2() because the interval length
is 16 times smaller. Its maximum was at least P1 * (1.0 ulps) *
max(|z|) ~= log(2) * 1.0 * 1/32 ~= 0.0217 ulps (1.0 ulps from the
addition in (1 + P1*z) with a cancelation error when z ~= -1/32). The
actual final maximum was 0.5313 ulps, of which 0.0303 ulps must have
come from the additional roundoff error in p(z). I can't explain why
the additional roundoff error was almost 3/2 times larger than the rough
estimate.
precision. The new polynomial has degree 4 instead of 10, and a maximum
error of 2**-30.04 ulps instead of 2**-33.15. This doesn't affect the
final error significantly; the maximum error was and is about 0.5015
ulps on i386 -O1, and the number of cases with an error of > 0.5 ulps
is increased from 13851 to 14407.
Note that the error is only this close to 0.5 ulps due to excessive
extra precision caused by compiler bugs on i386. The extra precision
could be obtained intentionally, and is useful for keeping the error
of the hyperbolic float functions below 1 ulp, since these functions
are implemented using expm1f. My recent change for scaling by 2**k
had the unintentional side effect of retaining extra precision for
longer, so callers of expm1f see errors of more like 0.0015 ulps than
0.5015 ulps, and for the hyperbolic functions this reduces the maximum
error from nearly about 2 ulps to about 0.75 ulps.
This is about 10% faster on i386 (A64). expm1* is still very slow,
but now the float version is actually significantly faster. The
algorithm is very sophisticated but not very good except on machines
with fast division.
arena_dalloc_lazy_hard() was split out of arena_dalloc_lazy() in revision
1.162.
Reduce thundering herd problems in lazy deallocation by randomly varying
how many probes a thread does before taking the slow path.
assumptions about whether bits are set at various times. This makes
adding other flags safe.
Reorganize functions in order to inline i{m,c,p,s,re}alloc(). This
allows the entire fast-path call chains for malloc() and free() to be
inlined. [1]
Suggested by: [1] Stuart Parmenter <stuart@mozilla.com>
exponent bits of the reduced result, construct 2**k (hopefully in
parallel with the construction of the reduced result) and multiply by
it. This tends to be much faster if the construction of 2**k is
actually in parallel, and might be faster even with no parallelism
since adjustment of the exponent requires a read-modify-wrtite at an
unfortunate time for pipelines.
In some cases involving exp2* on amd64 (A64), this change saves about
40 cycles or 30%. I think it is inherently only about 12 cycles faster
in these cases and the rest of the speedup is from partly-accidentally
avoiding compiler pessimizations (the construction of 2**k is now
manually scheduled for good results, and -O2 doesn't always mess this
up). In most cases on amd64 (A64) and i386 (A64) the speedup is about
20 cycles. The worst case that I found is expf on ia64 where this
change is a pessimization of about 10 cycles or 5%. The manual
scheduling for plain exp[f] is harder and not as tuned.
Details specific to expm1*:
- the saving is closer to 12 cycles than to 40 for expm1* on i386 (A64).
For some reason it is much larger for negative args.
- also convert to __FBSDID().
exponent bits of the reduced result, construct 2**k (hopefully in
parallel with the construction of the reduced result) and multiply by
it. This tends to be much faster if the construction of 2**k is
actually in parallel, and might be faster even with no parallelism
since adjustment of the exponent requires a read-modify-wrtite at an
unfortunate time for pipelines.
In some cases involving exp2* on amd64 (A64), this change saves about
40 cycles or 30%. I think it is inherently only about 12 cycles faster
in these cases and the rest of the speedup is from partly-accidentally
avoiding compiler pessimizations (the construction of 2**k is now
manually scheduled for good results, and -O2 doesn't always mess this
up). In most cases on amd64 (A64) and i386 (A64) the speedup is about
20 cycles. The worst case that I found is expf on ia64 where this
change is a pessimization of about 10 cycles or 5%. The manual
scheduling for plain exp[f] is harder and not as tuned.
This change ld128/s_exp2l.c has not been tested.
that is specialized for float precision. The new polynomial has degree
5 instead of 11, and a maximum error of 2**-27.74 ulps instead
of 2**-30.64. This doesn't affect the final error significantly; the
maximum error was and is about 0.9101 ulps on amd64 -01 and the number
of cases with an error of > 0.5 ulps is actually reduced by epsilon
despite the larger error in the polynomial.
This is about 15% faster on amd64 (A64), i386 (A64) and ia64. The asm
version is still used instead of this on i386 since it is faster and
more accurate.
threshold, according to the 'F' MALLOC_OPTIONS flag. This obsoletes the
'H' flag.
Try to realloc() large objects in place. This substantially speeds up
incremental large reallocations in the common case.
Fix a bug in arena_ralloc() that caused relocation of sub-page objects
even if the old and new sizes were in the same size class.
Maintain trees of runs and simplify the per-chunk page map. This allows
logarithmic-time searching for sufficiently large runs in
arena_run_alloc(), whereas the previous algorithm required linear time
in the worst case.
Break various large functions into smaller sub-functions, and inline
only the functions that are in the fast path for small object
allocation/deallocation.
Remove an unnecessary check in base_pages_alloc_mmap().
Avoid integer division in choose_arena() for the NO_TLS case on
single-CPU systems.
the semantics of pthread_mutex_islocked_np() to return true if and only if
the mutex is held by the current thread.
Obviously, change the regression test to match.
MFC after: 2 weeks
locked. This is intended primarily to support the userland equivalent
of the various *_ASSERT_LOCKED() macros we have in the kernel.
MFC after: 2 weeks
referencing the files VM pages are returned from the network stack,
making changes to the file safe.
This flag does not guarantee that the data has been transmitted to the
other end.
use. If it is in use, use the watched request, otherwise use the
lockuser's own request. Only allocate a lockuser request if both
requests are null.
PR: 119920
Tested by (6.x): Landon Fuller <landonf -at- bikemonkey -dot- org>
prerequisite for using this interface. However, the 'statinfo' struct
actually references CPUSTATES from <sys/resource.h>, so in fact it
requires <sys/resource.h> to compile. Use a nested include of
<sys/resource.h> to make the code match the docs.
Reported by: Pietro Cerutti gahr | gahr.ch
global header if nothing else has been written before the closing of
the archive. This will change the behaviour when creating archives
without members, i.e., instead of generating a 0-size archive file, an
archive with just the global header (8 bytes in total) will be created
and it is indeed a valid archive by the definition of libarchive, thus
subsequent operation on this archive will be accepted. This especially
solves the failure caused by following sequence: (several ports do)
% ar cru libfoo.a # without specifying obj files
% ranlib libfoo.a
Reviewed by: kientzle, jkoshy
Approved by: kientzle
Approved by: jkoshy (mentor)
Reported by: erwin
MFC after: 1 month
obey or ignore the size field on a hardlink entry. In particular,
if we're reading a non-POSIX archive, we should always ignore
the size field.
This should fix both the audio/xmcd port and the math/unixstat port.
Thanks to: Pav Lucistnik for pointing these two ports out to me.
MFC after: 7 days
fields in FTS and FTSENT structs being too narrow. In addition,
the narrow types creep from there into fts.c. As a result, fts(3)
consumers, e.g., find(1) or rm(1), can't handle file trees an ordinary
user can create, which can have security implications.
To fix the historic implementation of fts(3), OpenBSD and NetBSD
have already changed <fts.h> in somewhat incompatible ways, so we
are free to do so, too. This change is a superset of changes from
the other BSDs with a few more improvements. It doesn't touch
fts(3) functionality; it just extends integer types used by it to
match modern reality and the C standard.
Here are its points:
o For C object sizes, use size_t unless it's 100% certain that
the object will be really small. (Note that fts(3) can construct
pathnames _much_ longer than PATH_MAX for its consumers.)
o Avoid the short types because on modern platforms using them
results in larger and slower code. Change shorts to ints as
follows:
- For variables than count simple, limited things like states,
use plain vanilla `int' as it's the type of choice in C.
- For a limited number of bit flags use `unsigned' because signed
bit-wise operations are implementation-defined, i.e., unportable,
in C.
o For things that should be at least 64 bits wide, use long long
and not int64_t, as the latter is an optional type. See
FTSENT.fts_number aka FTS.fts_bignum. Extending fts_number `to
satisfy future needs' is pointless because there is fts_pointer,
which can be used to link to arbitrary data from an FTSENT.
However, there already are fts(3) consumers that require fts_number,
or fts_bignum, have at least 64 bits in it, so we must allow for them.
o For the tree depth, use `long'. This is a trade-off between making
this field too wide and allowing for 64-bit inode numbers and/or
chain-mounted filesystems. On the one hand, `long' is almost
enough for 32-bit filesystems on a 32-bit platform (our ino_t is
uint32_t now). On the other hand, platforms with a 64-bit (or
wider) `long' will be ready for 64-bit inode numbers, as well as
for several 32-bit filesystems mounted one under another. Note
that fts_level has to be signed because -1 is a magic value for it,
FTS_ROOTPARENTLEVEL.
o For the `nlinks' local var in fts_build(), use `long'. The logic
in fts_build() requires that `nlinks' be signed, but our nlink_t
currently is uint16_t. Therefore let's make the signed var wide
enough to be able to represent 2^16-1 in pure C99, and even 2^32-1
on a 64-bit platform. Perhaps the logic should be changed just
to use nlink_t, but it can be done later w/o breaking fts(3) ABI
any more because `nlinks' is just a local var.
This commit also inludes supporting stuff for the fts change:
o Preserve the old versions of fts(3) functions through libc symbol
versioning because the old versions appeared in all our former releases.
o Bump __FreeBSD_version just in case. There is a small chance that
some ill-written 3-rd party apps may fail to build or work correctly
if compiled after this change.
o Update the fts(3) manpage accordingly. In particular, remove
references to fts_bignum, which was a FreeBSD-specific hack to work
around the too narrow types of FTSENT members. Now fts_number is
at least 64 bits wide (long long) and fts_bignum is an undocumented
alias for fts_number kept around for compatibility reasons. According
to Google Code Search, the only big consumers of fts_bignum are in
our own source tree, so they can be fixed easily to use fts_number.
o Mention the change in src/UPDATING.
PR: bin/104458
Approved by: re (quite a while ago)
Discussed with: deischen (the symbol versioning part)
Reviewed by: -arch (mostly silence); das (generally OK, but we didn't
agree on some types used; assuming that no objections on
-arch let me to stick to my opinion)
Even though I believe this is a good change, it does
have the potential to break certain clients, so it's
good to document the reasoning behind the change.
cases which are used mainly by regression tests.
As usual, the cutoff for tiny args was not correctly translated to
float precision. It was 2**-54 but 2**-24 works. It must be about
2**-precision, since the error from approximating log(1+x) by x is
about the same as |x|. Exhaustive testing shows that 2**-24 gives
perfect rounding in round-to-nearest mode.
Similarly for the cutoff for being small, except this is not used by
so many other functions. It was 2**-29 but 2**-15 works. It must be
a bit smaller than sqrt(2**-precision), since the error from
approximating log(1+x) by x-x*x/2 is about the same as x*x. Exhaustive
testing shows that 2**-15 gives a maximum error of 0.5052 ulps in
round-to-nearest-mode. The algorithm for the general case is only good
for 0.8388 ulps, so this is sufficient (but it loses slightly on i386 --
then extra precision gives 0.5032 ulps for the general case).
While investigating this, I noticed that optimizing the usual case by
falling into a middle case involving a simple polynomial evaluation
(return x-x*x/2 instead of x here) is not such a good idea since it
gives an enormous pessimization of tinier args on machines for which
denormals are slow. Float x*x/2 is denormal when |x| ~< 2**-64 and
x*x/2 is evaluated in float precision, so it can easily be denormal
for normal x. This is even more interesting for general polynomial
evaluations. Multiplying out large powers of x is normally a good
optimization since it reduces dependencies, but it creates denormals
starting with quite large x.
forget to translate "float" to "double".
ucbtest didn't detect the bug, but exhaustive testing of the float
case relative to the double case eventually did. The bug only affects
args x with |x| ~> 2**19*(pi/2) on non-i386 (i386 is broken in a
different way for large args).
it should never have existed and it has not been used for many years
(floats are reduced faster using doubles). All relevant changes (just
the workaround for broken assignment) have been merged to the double
version.
there is a problem with non-floats (when i386 defaults to extra
precision). This essentially restores yesterday's behaviour for doubles
on i386 (since generic rint() isn't used and everywhere else assumed
working assignment), but for arches that use the generic rint() it
finishes restoring some of 1995's behaviour (don't waste time doing
unnecessary store/load).
variable hack for exp2f() only.
The volatile variable had a surprisingly large cost for exp2f() -- 19
cycles or 15% on i386 in the worst case observed. This is only partly
explained by there being several references to the variable, only one
of which benefited from it being volatile. Arches that have working
assignment are likely to benefit even more from not having any volatile
variable.
exp2() now has a chance of working with extra precision on i386.
exp2() has even more references to the variable, so it would have been
pessimized more by simply declaring the variable as volatile. Even
the temporary volatile variable for STRICT_ASSIGN costs 5-10% on i386,
(A64) so I will change STRICT_ASSIGN() to do an ordinary assignment
until i386 defaults to extra precision.
instead of a volatile cast hack for the float version only. The cast
hack broke with gcc-4, but this was harmless since the float version
hasn't been used for a few years. Merge from the float version so
that the double version has a chance of working on i386 with extra
precision.
See k_rem_pio2f.c rev.1.8 for the original hack.
Convert to _FBSDID().
hack for log1pf() only. The cast hack broke with gcc-4, resulting in
~1 million errors of more than 1 ulp, with a maximum error of ~1.5 ulps.
Now the maximum error for log1pf() on i386 is 0.5034 ulps again (this
depends on extra precision), and log1p() has a chance of working with
extra precision.
See s_log1pf.c 1.8 for the original hack. (It claims only 62343 large
errors).
Convert to _FBSDID(). Another thing broken with gcc-4 is the static
const hack used for rcsids.
around assignments not working for gcc on i386. Now volatile hacks
for rint() and rintf() don't needlessly pessimize so many arches
and the remaining pessimizations (for arm and powerpc) can be avoided
centrally.
This cleans up after s_rint.c 1.3 and 1.13 and s_rintf.c 1.3 and 1.9:
- s_rint.c 1.13 broke 1.3 by only using a volatile cast hack in 1 place
when it was needed in 2 places, and the volatile cast hack stopped
working with gcc-4. These bugs only affected correctness tests on
i386 since i386 normally uses asm rint() and doesn't support the
extra precision mode that would break assignments of doubles.
- s_rintf.c 1.9 improved(?) on 1.3 by using a volatile variable hack
instead of an extra-precision variable hack, but it declared 2
variables as volatile when only 1 variable needed to be volatile.
This only affected speed tests on i386 since i386 uses asm rintf().
long doubles (i386, amd64, ia64) and one for machines with 128-bit
long doubles (sparc64). Other platforms use the double version.
I've only done runtime testing on i386.
Thanks to bde@ for helpful discussions and bugfixes.
write a new test to exercise the hardlink strategies used
by different archive formats (tar, old cpio, new cpio).
This uncovered two problems, both fixed by this commit:
1) Enforce file size when writing files to disk.
2) When restoring hardlink entries, if they have data associated, go
ahead and open the file so we can write the data.
In particular, this fixes bsdtar/bsdcpio extraction of new cpio
formats where the "original" is empty and the subsequent "hardlink"
entry actually carries the data. It also provides correct behavior
for old cpio archives where hardlinked entries have their bodies
stored multiple times in the archive; the last body should always be
the one that ends up in the final file. The new pax format also
permits (but does not require) hardlinks to carry file data; again,
the last contents should always win.
Note that with any of these, a size of zero on a hardlink simply means
that the hardlink carries no data; it does not mean that the file has
zero size. A non-zero size on a hardlink does provide the file size.
Thanks to: John Baldwin, for reminding me about this long-standing bug
and sending me a simple example archive that prompted this test case
assignments and casts don't clip extra precision, if any. The
implementation is to assign to a temporary volatile variable and read
the result back to assign to the original lvalue.
lib/msun currently 2 different hard-coded hacks to avoid the problem
in just a few places and needs it in a few more places. One variant
uses volatile for the original lvalue. This works but is slower than
necessary. Another temporarily casts the lvalue to volatile. This
broke with gcc-4.2.1 or earlier (gcc now stores to the lvalue but
doesn't load from it).
instead of 32+32+15+1) on all arches that have such long doubles (amd64,
ia64 and i386). Large objects should be be accessed in large units,
and the 32+32+15+1[+padding] decomposition asks for almost the opposite
of that, sometimes resulting in very slow accesses depending on how
well the compiler ignores what we ask for and converts to the best
units for the given machine. E.g., on Athlons, there is a 10-20 cycle
penalty for accessing the middle 32-bit word immediately after an
80-bit store.
Whether actually using the alternative view is better is very machine-
dependent. A 32+32+16 view is probably best with old 32-bit systems
and gcc through 4.2.1. The compiler should mostly avoid the view and
generate best accesses, but gcc-4.2.1 is far from doing that. I think
64+16 is best for now. Similarly for doubles -- they should be using
64+0 especially on 64-bit machines, but fdlibm uses 32+32 extensively
for them. Fortunately, in 64-bit mode for doubles, gcc already ignores
the 32+32-bit view and generates best accesses in many cases.
one part" by simply ignoring the marker at the beginning
of the file. (Zip archivers reserve four bytes at the beginning
of each part of a multi-part archive, if it happens to only
require one part, those four bytes get filled with a placeholder
that can be ignored.)
Thanks to: Marius Nuennerich,
for pointing me to a Zip archive that libarchive couldn't handle
MFC after: 7 days
Specifically, remove the BUGS section and note that openpty(3) now always
does the various security-related steps. Also, update the error return
value section. The PR below is for the original bug rather than the doc
updates.
MFC after: 1 week
PR: bin/9770
into slowsort for some sequences because different parts of the
code used 'r' to store two different things, one of which was
signed. Clean things up by splitting 'r' into two variables, and
use a more meaningful name.
doesn't need to compensate for this situation.
While here, fix a minor longstanding bug that empty tar archives
(which begin with at least 512 zero bytes) never properly reported
their format. In particular, this fixes the output of:
bsdtar tvvf /dev/zero
And, of course, a new test to verify that libarchive correctly
recognizes the format of such files.
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
default. This has the disadvantage of rendering the datasize resource
limit irrelevant, but without this change, legitimate uses of more
memory than will fit in the data segment are thwarted by default.
Fix chunk_alloc_mmap() to work correctly if initial mapping is not
chunk-aligned and mapping extension fails.
the number of bytes read is actually not important as long as we have at
least what we ask for. Illustrate its benefits by using it throughout
the ZIP support code, except for the few cases where it doesn't apply.
Approved by: kientzle
exercises and verifies the libarchive APIs:
* Improved error reporting; hexdumps are now provided for
many file/memory content differences.
* Overall status more clearly counts "tests" and "assertions"
* Reference files can now be stored on disk instead of having
to be compiled into the test program itself. A couple of
tests have been converted to this more natural structure.
* Several memory leaks corrected so that leaks within libarchive
itself can be more easily detected and diagnosed.
* New test: GNU tar compatibility
* New test: Zip compatibility
* New test: Zero-byte writes to a compressed archive entry
* New test: archive_entry_strmode() format verification
* New test: mtree reader
* New test: write/read of large (2G - 1TB) entries to tar archives
(thanks to recent performance work, this test only requires a few seconds)
* New test: detailed format verification of cpio odc and newc writers
* Many minor additions/improvements to existing tests as well.
Clean up DSS-related locking and protect all pertinent variables with
dss_mtx (remove dss_chunks_mtx). This fixes race conditions that could
cause chunk leaks.
Reported by: [1] kris
This is a long-standing bug, but until recent changes it was difficult
to trigger, and even then its impact was non-catastrophic, with the
exception of revision 1.157.
Optimize chunk_alloc_mmap() to avoid the need for unmapping pages in the
common case. Thanks go to Kris Kennaway for a patch that inspired this
change.
Do not maintain a record of previously mmap'ed chunk address ranges.
The original intent was to avoid the extra system call overhead in
chunk_alloc_mmap(), which is no longer a concern. This also allows some
simplifications for the tree of unused DSS chunks.
Introduce huge_mtx and dss_chunks_mtx to replace chunks_mtx. There was
no compelling reason to use the same mutex for these disjoint purposes.
Avoid memset() for huge allocations when possible.
Maintain two trees instead of one for tracking unused DSS address
ranges. This allows scalable allocation of multi-chunk huge objects in
the DSS. Previously, multi-chunk huge allocation requests failed if the
DSS could not be extended.
that I've been working on but put off committing until after the
RELENG_7 branch, including:
* New manpages: cpio.5 mtree.5
* New archive_entry_strmode()
* New archive_entry_link_resolver()
* New read support: mtree format
* Internal API change: read format auction only runs once
* Running the auction only once allowed simplifying a lot of bid logic.
* Cpio robustness: search for next header after a sync error
* Support device nodes on ISO9660 images
* Eliminate a lot of unnecessary copies for uncompressed archives
* Corrected handling of new GNU --sparse --posix formats
* Correctly handle a zero-byte write to a compressed archive
* Fixed memory leaks
Many of these improvements were motivated by the upcoming bsdcpio
front-end.
There have also been extensive improvements to the libarchive_test
test harness, which I'll commit separately.
global list of all files.
- Mark kvm_getfiles() as broken since the live version exports struct xfile
with no filelist at the head and does so incorrectly and the deadfiles
version exports struct file with a filelist at the head. It is not known
if either version works or complies to the manpage.
order to support re-use of multi-chunk unused regions within the DSS for
huge allocations. This generalization is important to correct function
when mmap-based allocation is disabled.
Avoid zeroing re-used memory in the DSS unless it really needs to be
zeroed.
memory is acquired from the system via sbrk(2) and/or mmap(2). By default,
use sbrk(2) only, in order to support traditional use of resource limits.
Additionally, when both options are enabled, prefer the data segment to
anonymous mappings, in order to coexist better with large file mappings
in applications on 32-bit platforms. This change has the potential to
increase memory fragmentation due to the linear nature of the data
segment, but from a performance perspective this is mitigated by the use
of madvise(2). [1]
Add the ability to interpret integer prefixes in MALLOC_OPTIONS
processing. For example, MALLOC_OPTIONS=lllllllll can now be specified as
MALLOC_OPTIONS=9l.
Reported by: [1] rwatson
Design review: [1] alc, peter, rwatson
- Use PTY* for all pty(4) related constants.
- Use PTMX* for all pts(4) related constants.
- Consistently use _PATH_DEV PTMX rather than "/dev/ptmx".
- Revert 1.7 and properly fix it by using the correct prefix string for
pts(4) masters.
MFC after: 3 days
kick off any other users on the device line before using it since
openpty(3) is documented to do this. Note that grantpt(3) does not
call revoke(2), it only adjusts permissions and ownership.
MFC after: 3 days
my original implementation made both use the same code. Unfortunately,
this meant libm depended on a vendor header at compile time and previously-
unexposed vendor bits in libc at runtime.
Hence, I just wrote my own version of the relevant vendor routine. As it
turns out, mine has a factor of 8 fewer of lines of code, and is a bit more
readable anyway. The strtod() and *scanf() routines still use vendor code.
Reviewed by: bde
lynx, curl etc. Note that this patch differs significantly from that
in the PR, as the submitter refined it after submitting the PR.
PR: 110388
Submitted by: Alexander Pohoyda <alexander.pohoyda@gmx.net>
MFC after: 3 weeks
calculating run sizes. Use of the floating point unit was a potential
pessimization to context switching for applications that do not otherwise
use floating point math. [1]
Reformat cpp macro-related comments to improve consistency.
Submitted by: das
returned on a perfectly valid bzip2 stream whose decompressed size
is multiple of read-ahead buffer size. Reproduce the problem is easy:
create some power-of-two sized file (truncate -s 1m file will do),
bzip2 it and try to load it as md_image from loader. See how it fails.
The bug doesn't affect gzip code (which most of bzip2-reading code was
copied from) probably due to the fact that libgzip doesn't report
Z_STREAM_END with the last block, but requires extra call to inflate()
to retrieve it and has some extra data in the input stream at that time.
However, apply similar fix to gzipfs.c just in the case the API will
change in the future to do what bzip2 code does.
Add some ifdef'ed code to enable testing bzipfs.c from witin normal
FreeBSD environment as opposed to the restricted loader one, so that
one can use gdb and whatnot.
Sponsored by: Sippy Software, Inc., http://www.sippysoft.com/
MFC in: 7 days
someone thought it would be a good idea to copy z_abs() to libm in 1994.
However, it's never been declared or documented anywhere, and I'm
reasonably confident that nobody uses it.
Discussed with: bde, deischen, kan
I hope that this and the i386 version of it will not be needed, but
this is currently about 16 cycles or 36% faster than the C version,
and the i386 version is about 8 cycles or 19% faster than the C
version, due to poor optimization of the C version.
