Ian Lepore 8926f21ce1 Enable at91 systems to boot from high capacity SD cards. ... This also fixes a few minor violations of the SD protocol, such as running the bus at high speed during the card identification sequence. The sdcard_init() routine now probes for SDHC cards so that later read requests can make needed adjustments between block and byte offsets based on card type. There is a new MCI_readblocks() function that takes block number and block count parameters instead of byte-offset values. Using this routine, boot loader code can load a kernel from any location on an SDHC or standard SD. The old MCI_read() interface remains unchanged so that existing customized boot loader code will still keep working without changes. Using this routine, boot loaders can load a kernel from anywhere in the first 4GB of an SDHC card (or of course any location on a standard SD card). A new sdcard_use4wire() routine allows boot loaders to request 4-bit transfers; it should be called after sdcard_init(). The sdcard_init() routine no longer assumes the hardware is 4-wire capable and by default sets things up for 1-bit transfers. (4-wire mode is unreliable on at91rm9200, works on later SoCs.) PR: 155894 Submitted by: me. years ago.		2014-07-26 04:16:04 +00:00
..
arm_init.S
at91rm9200.h	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
at91rm9200_lowlevel.c	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
at91rm9200_lowlevel.h
delay.c
eeprom.c	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
emac.c	Silence a clang warning about a while loop with an empty body.	2014-07-26 03:19:13 +00:00
emac.h
emac_init.c	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
getc.c
lib.h
lib_AT91RM9200.h	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
Makefile	Use src.opts.mk in preference to bsd.own.mk except where we need stuff	2014-05-06 04:22:01 +00:00
mci_device.h	Enable at91 systems to boot from high capacity SD cards.	2014-07-26 04:16:04 +00:00
memcmp.c
memcpy.c
memset.c
p_string.c
printf.c
putchar.c
reset.c
sd-card.c	Enable at91 systems to boot from high capacity SD cards.	2014-07-26 04:16:04 +00:00
sd-card.h	Enable at91 systems to boot from high capacity SD cards.	2014-07-26 04:16:04 +00:00
spi_flash.c	Use the pin number rather than the hybrid pin number + name.	2012-07-15 05:35:14 +00:00
spi_flash.h
strcmp.c
strcpy.c
strcvt.c
strlen.c
tag_list.c
tag_list.h
xmodem.c