This fixes a problem similar to ad8c86d22c. In this case, the test
could fail under the following circumstances:
- The primary is stopped with teardown_node(), meaning that it may not
be able to send all its WAL records to standby_1 and standby_2.
- If standby_2 receives more records than standby_1, attempting to
reconnect standby_2 to the promoted standby_1 would fail because of a
timeline fork.
This race condition is fixed with a simple trick: instead of tearing
down the primary, it is stopped cleanly so as all the WAL records of the
primary are received and flushed by both standby_1 and standby_2. Once
we do that, there is no need for a wait_for_catchup() before stopping
the node. The test wants to check that a timeline jump can be achieved
when reconnecting a standby to a promoted standby in the same cluster,
hence an immediate stop of the primary is not required.
This failure is harder to reach than the previous instability of
009_twophase, still the buildfarm has been able to detect this failure
at least once. I have tried Alexander Lakhin's test trick with the
bgwriter and very aggressive standby snapshots, but I could not
reproduce it directly. It is reachable, as the buildfarm has proved.
Backpatch down to all supported branches, and this problem can lead to
spurious failures in the buildfarm.
Discussion: https://postgr.es/m/493401a8-063f-436a-8287-a235d9e065fc@gmail.com
Backpatch-through: 14
The phase of the test where we want to check that 2PC transactions
prepared on a primary can be committed on a promoted standby relied on
an immediate stop of the primary. This logic has a race condition: it
could be possible that some records (most likely standby snapshot
records) are generated on the primary before it finishes its shutdown,
without the promoted standby know about them. When the primary is
recycled as new standby, the test could fail because of a timeline fork
as an effect of these extra records.
This fix takes care of the instability by doing a clean stop of the
primary instead of a teardown (aka immediate stop), so as all records
generated on the primary are sent to the promoted standby and flushed
there. There is no need for a teardown of the primary in this test
scenario: the commit of 2PC transactions on a promoted standby do not
care about the state of the primary, only of the standby.
This race is very hard to hit in practice, even slow buildfarm members
like skink have a very low rate of reproduction. Alexander Lakhin has
come up with a recipe to improve the reproduction rate a lot:
- Enable -DWAL_DEBUG.
- Patch the bgwriter so as standby snapshots are generated every
milliseconds.
- Run 009_twophase tests under heavy parallelism.
With this method, the failure appears after a couple of iterations.
With the fix in place, I have been able to run more than 50 iterations
of the parallel test sequence, without seeing a failure.
Issue introduced in 30820982b2, due to a copy-pasto coming from the
surrounding tests. Thanks also to Hayato Kuroda for digging into the
details of the failure. He has proposed a fix different than the one of
this commit. Unfortunately, it relied on injection points, feature only
available in v17. The solution of this commit is simpler, and can be
applied to v14~v16.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/b0102688-6d6c-c86a-db79-e0e91d245b1a@gmail.com
Backpatch-through: 14
Clarify the documentation of COMMENT ON to state that specifying an empty
string is treated as NULL, meaning that the comment is removed.
This makes the behavior explicit and avoids possible confusion about how
empty strings are handled.
Also adds regress test cases that use empty string to remove a comment.
Backpatch to all supported versions.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Shengbin Zhao <zshengbin91@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: zhangqiang <zhang_qiang81@163.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/26476097-B1C1-4BA8-AA92-0AD0B8EC7190@gmail.com
Backpatch-through: 14
This commit adds a new test module called "test_custom_types", that can
be used to stress code paths related to custom data type
implementations.
Currently, this is used as a test suite to validate the set of fixes
done in 3b7a6fa157, that requires some typanalyze callbacks that can
force very specific backend behaviors, as of:
- typanalyze callback that returns "false" as status, to mark a failure
in computing statistics.
- typanalyze callback that returns "true" but let's the backend know
that no interesting stats could be computed, with stats_valid set to
"false".
This could be extended more in the future if more problems are found.
For simplicity, the module uses a fake int4 data type, that requires a
btree operator class to be usable with extended statistics. The type is
created by the extension, and its properties are altered in the test.
Like 3b7a6fa157, this module is backpatched down to v14, for coverage
purposes.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aaDrJsE1I5mrE-QF@paquier.xyz
Backpatch-through: 14
This commit addresses two defects regarding extended statistics on
expressions:
- When building extended statistics in lookup_var_attr_stats(), the call
to examine_attribute() did not account for the possibility of a NULL
return value. This can happen depending on the behavior of a typanalyze
callback — for example, if the callback returns false, if no rows are
sampled, or if no statistics are computed. In such cases, the code
attempted to build MCV, dependency, and ndistinct statistics using a
NULL pointer, incorrectly assuming valid statistics were available,
which could lead to a server crash.
- When loading extended statistics for expressions,
statext_expressions_load() did not account for NULL entries in the
pg_statistic array storing expression statistics. Such NULL entries can
be generated when statistics collection fails for an expression, as may
occur during the final step of serialize_expr_stats(). An extended
statistics object defining N expressions requires N corresponding
elements in the pg_statistic array stored for the expressions, and some
of these elements can be NULL. This situation is reachable when a
typanalyze callback returns true, but sets stats_valid to indicate that
no useful statistics could be computed.
While these scenarios cannot occur with in-core typanalyze callbacks, as
far as I have analyzed, they can be triggered by custom data types with
custom typanalyze implementations, at least.
No tests are added in this commit. A follow-up commit will introduce a
test module that can be extended to cover similar edge cases if
additional issues are discovered. This takes care of the core of the
problem.
Attribute and relation statistics already offer similar protections:
- ANALYZE detects and skips the build of invalid statistics.
- Invalid catalog data is handled defensively when loading statistics.
This issue exists since the support for extended statistics on
expressions has been added, down to v14 as of a4d75c86bf. Backpatch
to all supported stable branches.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aaDrJsE1I5mrE-QF@paquier.xyz
Backpatch-through: 14
Commit 84d5efa7e3 missed some multibyte issues caused by short-circuit
logic in the callers. The callers assumed that if the predicate string
is longer than the label string, then it couldn't possibly be a match,
but it can be when using case-insensitive matching (LVAR_INCASE) if
casefolding changes the byte length.
Fix by refactoring to get rid of the short-circuit logic as well as
the function pointer, and consolidate the logic in a replacement
function ltree_label_match().
Discussion: https://postgr.es/m/02c6ef6cf56a5013ede61ad03c7a26affd27d449.camel@j-davis.com
Backpatch-through: 14
In commits 1d97e4788 et al, I forgot that pre-v17 branches
require updating Solution.pm when changing the set of
symbols generated in pg_config.h. Per buildfarm.
Otherwise, this would break if using C and C++ compilers from
different families and they understand different options. It already
used the right flags for compiling, this is only for linking. Also,
the meson setup already did this correctly.
Back-patch of v18 commit 365b5a345 into older supported branches.
At the time we were only aware of trouble in v18, but as shown
by buildfarm member siren, older branches can hit the problem too.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/228700.1722717983@sss.pgh.pa.us
Discussion: https://postgr.es/m/3109540.1771698685@sss.pgh.pa.us
Backpatch-through: 14-17
Settings that ran the new test euc_kr.sql to completion would fail these
older src/pl tests. Use alternative expected outputs, for which psql
\gset and \if have reduced the maintenance burden. This fixes
"LANG=ko_KR.euckr LC_MESSAGES=C make check-world". (LC_MESSAGES=C fixes
IO::Pty usage in tests 010_tab_completion and 001_password.) That file
is new in commit c67bef3f32. Back-patch
to v14, like that commit.
Discussion: https://postgr.es/m/20260217184758.da.noahmisch@microsoft.com
Backpatch-through: 14
The documentation for the INCLUDING COMMENTS option of the LIKE clause
in CREATE TABLE was inaccurate and incomplete. It stated that comments for
copied columns, constraints, and indexes are copied, but regarding comments
on constraints in reality only comments on CHECK and NOT NULL constraints
are copied; comments on other constraints (such as primary keys) are not.
In addition, comments on extended statistics are copied, but this was not
documented.
The CREATE FOREIGN TABLE documentation had a similar omission: comments
on extended statistics are also copied, but this was not mentioned.
This commit updates the documentation to clarify the actual behavior.
The CREATE TABLE reference now specifies that comments on copied columns,
CHECK constraints, NOT NULL constraints, indexes, and extended statistics are
copied. The CREATE FOREIGN TABLE reference now notes that comments on
extended statistics are copied as well.
Backpatch to all supported versions. Documentation updates related to
CREATE FOREIGN TABLE LIKE and NOT NULL constraint comment copying are
not applied to v17 and earlier, since those features were introduced in v18.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwHSOSGcaYDvHF8EYCUCfGPjbRwGFsJ23cx5KbJ1X6JouQ@mail.gmail.com
Backpatch-through: 14
Previously, when one process woke another that was waiting on a lock,
ProcWakeup() incorrectly cleared its own waitStart field (i.e.,
MyProc->waitStart) instead of that of the process being awakened.
As a result, the awakened process retained a stale lock-wait start timestamp.
This did not cause user-visible issues. pg_locks.waitstart was reported as
NULL for the awakened process (i.e., when pg_locks.granted is true),
regardless of the waitStart value.
This bug was introduced by commit 46d6e5f567.
This commit fixes this by resetting the waitStart field of the process
being awakened in ProcWakeup().
Backpatch to all supported branches.
Reported-by: Chao Li <li.evan.chao@gmail.com>
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: ji xu <thanksgreed@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/537BD852-EC61-4D25-AB55-BE8BE46D07D7@gmail.com
Backpatch-through: 14
Although clang claims to be compatible with gcc's printf format
archetypes, this appears to be a falsehood: it likes __syslog__
(which gcc does not, on most platforms) and doesn't accept
gnu_printf. This means that if you try to use gcc with clang++
or clang with g++, you get compiler warnings when compiling
printf-like calls in our C++ code. This has been true for quite
awhile, but it's gotten more annoying with the recent appearance
of several buildfarm members that are configured like this.
To fix, run separate probes for the format archetype to use with the
C and C++ compilers, and conditionally define PG_PRINTF_ATTRIBUTE
depending on __cplusplus.
(We could alternatively insist that you not mix-and-match C and
C++ compilers; but if the case works otherwise, this is a poor
reason to insist on that.)
This commit back-patches 0909380e4 into supported branches.
Discussion: https://postgr.es/m/986485.1764825548@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
Newest versions of gcc+glibc are able to detect cases where code
implicitly casts away const by assigning the result of strchr() or
a similar function applied to a "const char *" value to a target
variable that's just "char *". This of course creates a hazard of
not getting a compiler warning about scribbling on a string one was
not supposed to, so fixing up such cases is good.
This patch fixes a dozen or so places where we were doing that.
Most are trivial additions of "const" to the target variable,
since no actually-hazardous change was occurring.
Thanks to Bertrand Drouvot for finding a couple more spots than
I had.
This commit back-patches relevant portions of 8f1791c61 and
9f7565c6c into supported branches. However, there are two
places in ecpg (in v18 only) where a proper fix is more
complicated than seems appropriate for a back-patch. I opted
to silence those two warnings by adding casts.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/1324889.1764886170@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
The test added by commit 4b760a181 assumed that a table's physical
row order would be predictable after an UPDATE. But a non-heap table
AM might produce some other order. Even with heap AM, the assumption
seems risky; compare a3fd53bab for instance. Adding an ORDER BY is
cheap insurance and doesn't break any goal of the test.
Author: Pavel Borisov <pashkin.elfe@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALT9ZEHcE6tpvumScYPO6pGk_ASjTjWojLkodHnk33dvRPHXVw@mail.gmail.com
Backpatch-through: 14
The grease patch in 4966bd3ed found its first problem: prior to the
February 2018 patch releases, no server knew how to negotiate protocol
versions, so pg_upgrade needs to take that into account when speaking to
those older servers.
This will be true even after the grease feature is reverted; we don't
need anyone to trip over this again in the future. Backpatch so that all
supported versions of pg_upgrade can gracefully handle an update to the
default protocol version. (This is needed for any distributions that
link older binaries against newer libpqs, such as Debian.) Branches
prior to 18 need an additional version check, for the existence of
max_protocol_version.
Per buildfarm member crake.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAOYmi%2B%3D4QhCjssfNEoZVK8LPtWxnfkwT5p-PAeoxtG9gpNjqOQ%40mail.gmail.com
Backpatch-through: 14
Commit c67bef3f32 introduced this test helper function for use by
src/test/regress/sql/encoding.sql, but its logic was incorrect. It
confused an encoding ID for a boolean so it gave the wrong results for
some inputs, and also forgot the usual return macro. The mistake didn't
affect values actually used in the test, so there is no change in
behavior.
Also drop it and another missed function at the end of the test, for
consistency.
Backpatch-through: 14
Author: Zsolt Parragi <zsolt.parragi@percona.com>
Various buildfarm members, having compilers like gcc 8.5 and 6.3, fail
to deduce that text_substring() variable "E" is initialized if
slice_size!=-1. This suppression approach quiets gcc 8.5; I did not
reproduce the warning elsewhere. Back-patch to v14, like commit
9f4fd119b2.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1157953.1771266105@sss.pgh.pa.us
Backpatch-through: 14
The receive function of hstore was not able to handle correctly
duplicate key values when a new duplicate links to a NULL value, where a
pfree() could be attempted on a NULL pointer, crashing due to a pointer
dereference.
This problem would happen for a COPY BINARY, when stacking values like
that:
aa => 5
aa => null
The second key/value pair is discarded and pfree() calls are attempted
on its key and its value, leading to a pointer dereference for the value
part as the value is NULL. The first key/value pair takes priority when
a duplicate is found.
Per offline report.
Reported-by: "Anemone" <vergissmeinnichtzh@gmail.com>
Reported-by: "A1ex" <alex000young@gmail.com>
Backpatch-through: 14
'latest_page_number' is set to the correct value, according to
nextOffset, early at system startup. Contrary to the comment, it hence
should be set up correctly by the time we get to WAL replay.
This fixes a failure to replay WAL generated on older minor versions,
before commit 789d65364c (18.2, 17.8, 16.12, 15.16, 14.21). The
failure occurs after a truncation record has been replayed and looks
like this:
FATAL: could not access status of transaction 858112
DETAIL: Could not read from file "pg_multixact/offsets/000D" at offset 24576: read too few bytes.
CONTEXT: WAL redo at 3/2A3AB408 for MultiXact/CREATE_ID: 858111 offset 6695072 nmembers 5: 1048228 (sh) 1048271 (keysh) 1048316 (sh) 1048344 (keysh) 1048370 (sh)
Reported-by: Sebastian Webber <sebastian@swebber.me>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/20260214090150.GC2297@p46.dedyn.io;lightning.p46.dedyn.io
Backpatch-through: 14-18
The error message added in 379695d3cc referred to the public key being
too long. This is confusing as it is in fact the session key included
in a PGP message which is too long. This is harmless, but let's be
precise about what is wrong.
Per offline report.
Reported-by: Zsolt Parragi <zsolt.parragi@percona.com>
Backpatch-through: 14
Commit 1e7fe06c10 changed
pg_mbstrlen_with_len() to ereport(ERROR) if the input ends in an
incomplete character. Most callers want that. text_substring() does
not. It detoasts the most bytes it could possibly need to get the
requested number of characters. For example, to extract up to 2 chars
from UTF8, it needs to detoast 8 bytes. In a string of 3-byte UTF8
chars, 8 bytes spans 2 complete chars and 1 partial char.
Fix this by replacing this pg_mbstrlen_with_len() call with a string
traversal that differs by stopping upon finding as many chars as the
substring could need. This also makes SUBSTRING() stop raising an
encoding error if the incomplete char is past the end of the substring.
This is consistent with the general philosophy of the above commit,
which was to raise errors on a just-in-time basis. Before the above
commit, SUBSTRING() never raised an encoding error.
SUBSTRING() has long been detoasting enough for one more char than
needed, because it did not distinguish exclusive and inclusive end
position. For avoidance of doubt, stop detoasting extra.
Back-patch to v14, like the above commit. For applications using
SUBSTRING() on non-ASCII column values, consider applying this to your
copy of any of the February 12, 2026 releases.
Reported-by: SATŌ Kentarō <ranvis@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Bug: #19406
Discussion: https://postgr.es/m/19406-9867fddddd724fca@postgresql.org
Backpatch-through: 14
The prior order caused spurious Valgrind errors. They're spurious
because the ereport(ERROR) non-local exit discards the pointer in
question. pg_mblen_cstr() ordered the checks correctly, but these other
two did not. Back-patch to v14, like commit
1e7fe06c10.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20260214053821.fa.noahmisch@microsoft.com
Backpatch-through: 14
If the variable's value is null, exec_stmt_return() missed filling
in estate->rettype. This is a pretty old bug, but we'd managed not
to notice because that value isn't consulted for a null result ...
unless we have to cast it to a domain. That case led to a failure
with "cache lookup failed for type 0".
The correct way to assign the data type is known by exec_eval_datum.
While we could copy-and-paste that logic, it seems like a better
idea to just invoke exec_eval_datum, as the ROW case already does.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFj8pRBT_ahexDf-zT-cyH8bMR_qcySKM8D5nv5MvTWPiatYGA@mail.gmail.com
Backpatch-through: 14
The pg_stat_activity view shows information for aux processes, but the
pg_stat_get_backend_wait_event() and
pg_stat_get_backend_wait_event_type() functions did not. To fix, call
AuxiliaryPidGetProc(pid) if BackendPidGetProc(pid) returns NULL, like
we do in pg_stat_get_activity().
In version 17 and above, it's a little silly to use those functions
when we already have the ProcNumber at hand, but it was necessary
before v17 because the backend ID was different from ProcNumber. I
have other plans for wait_event_info on master, so it doesn't seem
worth applying a different fix on different versions now.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/c0320e04-6e85-4c49-80c5-27cfb3a58108@iki.fi
Backpatch-through: 14
The buildfarm occasionally shows a variant row order in the output
of this UPDATE ... RETURNING, implying that the preceding INSERT
dropped one of the rows into some free space within the table rather
than appending them all at the end. It's not entirely clear why that
happens some times and not other times, but we have established that
it's affected by concurrent activity in other databases of the
cluster. In any case, the behavior is not wrong; the test is at fault
for presuming that a seqscan will give deterministic row ordering.
Add an ORDER BY atop the update to stop the buildfarm noise.
The buildfarm seems to have shown this only in v18 and master
branches, but just in case the cause is older, back-patch to
all supported branches.
Discussion: https://postgr.es/m/3866274.1770743162@sss.pgh.pa.us
Backpatch-through: 14
On the INSERT page, mention that SELECT privileges are also required
for any columns mentioned in the arbiter clause, including those
referred to by the constraint, and clarify that this applies to all
forms of ON CONFLICT, not just ON CONFLICT DO UPDATE.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Discussion: https://postgr.es/m/CAEZATCXGwMQ+x00YY9XYG46T0kCajH=21QaYL9Xatz0dLKii+g@mail.gmail.com
Backpatch-through: 14
On the CREATE POLICY page, the description of per-command policies
stated that SELECT policies are applied when an INSERT has an ON
CONFLICT DO NOTHING clause. However, that is only the case if it
includes an arbiter clause, so clarify that.
While at it, also clarify the comment in the regression tests that
cover this.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Discussion: https://postgr.es/m/CAEZATCXGwMQ+x00YY9XYG46T0kCajH=21QaYL9Xatz0dLKii+g@mail.gmail.com
Backpatch-through: 14
While the preceding commit prevented such attachments from occurring
in future, this one aims to prevent further abuse of any already-
created operator that exposes _int_matchsel to the wrong data types.
(No other contrib module has a vulnerable selectivity estimator.)
We need only check that the Const we've found in the query is indeed
of the type we expect (query_int), but there's a difficulty: as an
extension type, query_int doesn't have a fixed OID that we could
hard-code into the estimator.
Therefore, the bulk of this patch consists of infrastructure to let
an extension function securely look up the OID of a datatype
belonging to the same extension. (Extension authors have requested
such functionality before, so we anticipate that this code will
have additional non-security uses, and may soon be extended to allow
looking up other kinds of SQL objects.)
This is done by first finding the extension that owns the calling
function (there can be only one), and then thumbing through the
objects owned by that extension to find a type that has the desired
name. This is relatively expensive, especially for large extensions,
so a simple cache is put in front of these lookups.
Reported-by: Daniel Firer as part of zeroday.cloud
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14
Selectivity estimators come in two flavors: those that make specific
assumptions about the data types they are working with, and those
that don't. Most of the built-in estimators are of the latter kind
and are meant to be safely attachable to any operator. If the
operator does not behave as the estimator expects, you might get a
poor estimate, but it won't crash.
However, estimators that do make datatype assumptions can malfunction
if they are attached to the wrong operator, since then the data they
get from pg_statistic may not be of the type they expect. This can
rise to the level of a security problem, even permitting arbitrary
code execution by a user who has the ability to create SQL objects.
To close this hole, establish a rule that built-in estimators are
required to protect themselves against being called on the wrong type
of data. It does not seem practical however to expect estimators in
extensions to reach a similar level of security, at least not in the
near term. Therefore, also establish a rule that superuser privilege
is required to attach a non-built-in estimator to an operator.
We expect that this restriction will have little negative impact on
extensions, since estimators generally have to be written in C and
thus superuser privilege is required to create them in the first
place.
This commit changes the privilege checks in CREATE/ALTER OPERATOR
to enforce the rule about superuser privilege, and fixes a couple
of built-in estimators that were making datatype assumptions without
sufficiently checking that they're valid.
Reported-by: Daniel Firer as part of zeroday.cloud
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14
An upcoming patch requires this cache so that it can track updates
in the pg_extension catalog. So far though, the EXTENSIONOID cache
only exists in v18 and up (see 490f869d9). We can add it in older
branches without an ABI break, if we are careful not to disturb the
numbering of existing syscache IDs.
In v16 and before, that just requires adding the new ID at the end
of the hand-assigned enum list, ignoring our convention about
alphabetizing the IDs. But in v17, genbki.pl enforces alphabetical
order of the IDs listed in MAKE_SYSCACHE macros. We can fake it
out by calling the new cache ZEXTENSIONOID.
Note that adding a syscache does change the required contents of the
relcache init file (pg_internal.init). But that isn't problematic
since we blow those away at postmaster start for other reasons.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2004
Backpatch-through: 14-17
These data types are represented like full-fledged arrays, but
functions that deal specifically with these types assume that the
array is 1-dimensional and contains no nulls. However, there are
cast pathways that allow general oid[] or int2[] arrays to be cast
to these types, allowing these expectations to be violated. This
can be exploited to cause server memory disclosure or SIGSEGV.
Fix by installing explicit checks in functions that accept these
types.
Reported-by: Altan Birler <altan.birler@tum.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2003
Backpatch-through: 14
pgp_sym_decrypt() and pgp_pub_decrypt() will raise such errors, while
bytea variants will not. The existing "dat3" test decrypted to non-UTF8
text, so switch that query to bytea.
The long-term intent is for type "text" to always be valid in the
database encoding. pgcrypto has long been known as a source of
exceptions to that intent, but a report about exploiting invalid values
of type "text" brought this module to the forefront. This particular
exception is straightforward to fix, with reasonable effect on user
queries. Back-patch to v14 (all supported versions).
Reported-by: Paul Gerste (as part of zeroday.cloud)
Reported-by: Moritz Sanft (as part of zeroday.cloud)
Author: shihao zhong <zhong950419@gmail.com>
Reviewed-by: cary huang <hcary328@gmail.com>
Discussion: https://postgr.es/m/CAGRkXqRZyo0gLxPJqUsDqtWYBbgM14betsHiLRPj9mo2=z9VvA@mail.gmail.com
Backpatch-through: 14
Security: CVE-2026-2006
A security patch changed them today, so close the coverage gap now.
Test that buffer overrun is avoided when pg_mblen*() requires more
than the number of bytes remaining.
This does not cover the calls in dict_thesaurus.c or in dict_synonym.c.
That code is straightforward. To change that code's input, one must
have access to modify installed OS files, so low-privilege users are not
a threat. Testing this would likewise require changing installed
share/postgresql/tsearch_data, which was enough of an obstacle to not
bother.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
A corrupted string could cause code that iterates with pg_mblen() to
overrun its buffer. Fix, by converting all callers to one of the
following:
1. Callers with a null-terminated string now use pg_mblen_cstr(), which
raises an "illegal byte sequence" error if it finds a terminator in the
middle of the sequence.
2. Callers with a length or end pointer now use either
pg_mblen_with_len() or pg_mblen_range(), for the same effect, depending
on which of the two seems more convenient at each site.
3. A small number of cases pre-validate a string, and can use
pg_mblen_unbounded().
The traditional pg_mblen() function and COPYCHAR macro still exist for
backward compatibility, but are no longer used by core code and are
hereby deprecated. The same applies to the t_isXXX() functions.
Security: CVE-2026-2006
Backpatch-through: 14
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Paul Gerste (as part of zeroday.cloud)
Reported-by: Moritz Sanft (as part of zeroday.cloud)
When converting multibyte to pg_wchar, the UTF-8 implementation would
silently ignore an incomplete final character, while the other
implementations would cast a single byte to pg_wchar, and then repeat
for the remaining byte sequence. While it didn't overrun the buffer, it
was surely garbage output.
Make all encodings behave like the UTF-8 implementation. A later change
for master only will convert this to an error, but we choose not to
back-patch that behavior change on the off-chance that someone is
relying on the existing UTF-8 behavior.
Security: CVE-2026-2006
Backpatch-through: 14
Author: Thomas Munro <thomas.munro@gmail.com>
Reported-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
While EUC_CN supports only 1- and 2-byte sequences (CS0, CS1), the
mb<->wchar conversion functions allow 3-byte sequences beginning SS2,
SS3.
Change pg_encoding_max_length() to return 3, not 2, to close a
hypothesized buffer overrun if a corrupted string is converted to wchar
and back again in a newly allocated buffer. We might reconsider that in
master (ie harmonizing in a different direction), but this change seems
better for the back-branches.
Also change pg_euccn_mblen() to report SS2 and SS3 characters as having
length 3 (following the example of EUC_KR). Even though such characters
would not pass verification, it's remotely possible that invalid bytes
could be used to compute a buffer size for use in wchar conversion.
Security: CVE-2026-2006
Backpatch-through: 14
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
pgp_pub_decrypt_bytea() was missing a safeguard for the session key
length read from the message data, that can be given in input of
pgp_pub_decrypt_bytea(). This can result in the possibility of a buffer
overflow for the session key data, when the length specified is longer
than PGP_MAX_KEY, which is the maximum size of the buffer where the
session data is copied to.
A script able to rebuild the message and key data that can trigger the
overflow is included in this commit, based on some contents provided by
the reporter, heavily editted by me. A SQL test is added, based on the
data generated by the script.
Reported-by: Team Xint Code as part of zeroday.cloud
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Security: CVE-2026-2005
Backpatch-through: 14
(This is a cherry-pick of 390b3cbbb, which I hadn't realized wasn't
backpatched. It was originally reported to security@ and determined not
to be a vulnerability; thanks to Stanislav Osipov for noticing the
omission in the back branches.)
In case of torn UTF8 in the input data we might end up going
past the end of the string since we don't account for length.
While validation won't be performed on a sequence with a NULL
byte it's better to avoid going past the end to beging with.
Fix by taking the length into consideration.
Reported-by: Stanislav Osipov <stasos24@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+mTnmM172g=_+Yvc47hzzeAsYPy2C4UBY3HK9p-AXNV0g@mail.gmail.com
Backpatch-through: 14
