Since the introduction of TID store, vacuum uses far less memory in
the common case than in versions 16 and earlier. Invoking multiple
rounds of index vacuuming in turn requires a much larger table. It'd
be a good idea anyway to cover this case in regression testing, and a
lower limit is less painful for slow buildfarm animals. The reason to
do it now is to re-enable coverage of the bugfix in commit 83c39a1f7f.
For consistency, give autovacuum_work_mem the same treatment.
Suggested by Andres Freund
Tested by Melanie Plageman
Backpatch to v17, where TID store was introduced
Discussion: https://postgr.es/m/20240516205458.ohvlzis5b5tvejru@awork3.anarazel.de
Discussion: https://postgr.es/m/20240722164745.fvaoh6g6zprisqgp%40awork3.anarazel.de
When a standby is promoted, CleanupAfterArchiveRecovery() may decide
to rename the final WAL file from the old timeline by adding ".partial"
to the name. If WAL summarization is enabled and this file is renamed
before its partial contents are summarized, WAL summarization breaks:
the summarizer gets stuck at that point in the WAL stream and just
errors out.
To fix that, first make the startup process wait for WAL summarization
to catch up before renaming the file. Generally, this should be quick,
and if it's not, the user can shut off summarize_wal and try again.
To make this fix work, also teach the WAL summarizer that after a
promotion has occurred, no more WAL can appear on the previous
timeline: previously, the WAL summarizer wouldn't switch to the new
timeline until we actually started writing WAL there, but that meant
that when the startup process was waiting for the WAL summarizer, it
was waiting for an action that the summarizer wasn't yet prepared to
take.
In the process of fixing these bugs, I realized that the logic to wait
for WAL summarization to catch up was spread out in a way that made
it difficult to reuse properly, so this code refactors things to make
it easier.
Finally, add a test case that would have caught this bug and the
previously-fixed bug that WAL summarization sometimes needs to back up
when the timeline changes.
Discussion: https://postgr.es/m/CA+TgmoZGEsZodXC4f=XZNkAeyuDmWTSkpkjCEOcF19Am0mt_OA@mail.gmail.com
The old code believed that it was not possible to switch timelines
without first replaying all of the WAL from the old timeline, but
that turns out to be false, as demonstrated by an example from Fujii
Masao. As a result, it assumed that summarization would always
continue from the LSN where summarization previously ended. But in
fact, when a timeline switch occurs without replaying all the WAL
from the previous timeline, we can need to back up to an earlier
LSN. Adjust accordingly.
Discussion: https://postgr.es/m/CA+TgmoZGEsZodXC4f=XZNkAeyuDmWTSkpkjCEOcF19Am0mt_OA@mail.gmail.com
Commit 86db52a506 changed the locking of injection points to use only
atomic ops and spinlocks, to make it possible to define injection
points in processes that don't have a PGPROC entry (yet). However, it
didn't work in EXEC_BACKEND mode, because the pointer to shared memory
area was not initialized until the process "attaches" to all the
shared memory structs. To fix, pass the pointer to the child process
along with other global variables that need to be set up early.
Backpatch-through: 17
After calling ConditionVariableSleep() or ConditionVariableTimedSleep()
one or more times, code is supposed to call ConditionVariableCancelSleep()
to remove itself from the waitlist. This code neglected to do so.
As far as I know, that had no observable consequences, but let's make
the code correct.
Discussion: http://postgr.es/m/CA+TgmoYW8eR+KN6zhVH0sin7QH6AvENqw_bkN-bB4yLYKAnsew@mail.gmail.com
To do this, we must include the wal_level in the first WAL record
covered by each summary file; so add wal_level to struct Checkpoint
and the payload of XLOG_CHECKPOINT_REDO and XLOG_END_OF_RECOVERY.
This, in turn, requires bumping XLOG_PAGE_MAGIC and, since the
Checkpoint is also stored in the control file, also
PG_CONTROL_VERSION. It's not great to do that so late in the release
cycle, but the alternative seems to ship v17 without robust
protections against this scenario, which could result in corrupted
incremental backups.
A side effect of this patch is that, when a server with
wal_level=replica is started with summarize_wal=on for the first time,
summarization will no longer begin with the oldest WAL that still
exists in pg_wal, but rather from the first checkpoint after that.
This change should be harmless, because a WAL summary for a partial
checkpoint cycle can never make an incremental backup possible when
it would otherwise not have been.
Report by Fujii Masao. Patch by me. Review and/or testing by Jakub
Wartak and Fujii Masao.
Discussion: http://postgr.es/m/6e30082e-041b-4e31-9633-95a66de76f5d@oss.nttdata.com
Before this commit, when the WAL summarizer started up or recovered
from an error, it would resume summarization from wherever it left
off. That was OK normally, but wrong if summarize_wal=off had been
turned off temporary, allowing some WAL to be removed, and then turned
back on again. In such cases, the WAL summarizer would simply hang
forever. This commit changes the reinitialization sequence for WAL
summarizer to rederive the starting position in the way we were
already doing at initial startup, fixing the problem.
Per report from Israel Barth Rubio. Reviewed by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoYN6x=YS+FoFOS6=nr6=qkXZFWhdiL7k0oatGwug2hcuA@mail.gmail.com
1. TruncateMultiXact() performs the SLRU truncations in a critical
section. Deleting the SLRU segments calls ForwardSyncRequest(), which
will try to compact the request queue if it's full
(CompactCheckpointerRequestQueue()). That in turn allocates memory,
which is not allowed in a critical section. Backtrace:
TRAP: failed Assert("CritSectionCount == 0 || (context)->allowInCritSection"), File: "../src/backend/utils/mmgr/mcxt.c", Line: 1353, PID: 920981
postgres: autovacuum worker template0(ExceptionalCondition+0x6e)[0x560a501e866e]
postgres: autovacuum worker template0(+0x5dce3d)[0x560a50217e3d]
postgres: autovacuum worker template0(ForwardSyncRequest+0x8e)[0x560a4ffec95e]
postgres: autovacuum worker template0(RegisterSyncRequest+0x2b)[0x560a50091eeb]
postgres: autovacuum worker template0(+0x187b0a)[0x560a4fdc2b0a]
postgres: autovacuum worker template0(SlruDeleteSegment+0x101)[0x560a4fdc2ab1]
postgres: autovacuum worker template0(TruncateMultiXact+0x2fb)[0x560a4fdbde1b]
postgres: autovacuum worker template0(vac_update_datfrozenxid+0x4b3)[0x560a4febd2f3]
postgres: autovacuum worker template0(+0x3adf66)[0x560a4ffe8f66]
postgres: autovacuum worker template0(AutoVacWorkerMain+0x3ed)[0x560a4ffe7c2d]
postgres: autovacuum worker template0(+0x3b1ead)[0x560a4ffecead]
postgres: autovacuum worker template0(+0x3b620e)[0x560a4fff120e]
postgres: autovacuum worker template0(+0x3b3fbb)[0x560a4ffeefbb]
postgres: autovacuum worker template0(+0x2f724e)[0x560a4ff3224e]
/lib/x86_64-linux-gnu/libc.so.6(+0x27c8a)[0x7f62cc642c8a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f62cc642d45]
postgres: autovacuum worker template0(_start+0x21)[0x560a4fd16f31]
To fix, bail out in CompactCheckpointerRequestQueue() without doing
anything, if it's called in a critical section. That covers the above
call path, as well as any other similar cases where
RegisterSyncRequest might be called in a critical section.
2. After fixing that, another problem became apparent: Autovacuum
process doing that truncation can deadlock with the checkpointer
process. TruncateMultiXact() sets "MyProc->delayChkptFlags |=
DELAY_CHKPT_START". If the sync request queue is full and cannot be
compacted, the process will repeatedly sleep and retry, until there is
room in the queue. However, if the checkpointer is trying to start a
checkpoint at the same time, and is waiting for the DELAY_CHKPT_START
processes to finish, the queue will never shrink.
More concretely, the autovacuum process is stuck here:
#0 0x00007fc934926dc3 in epoll_wait () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x000056220b24348b in WaitEventSetWaitBlock (set=0x56220c2e4b50, occurred_events=0x7ffe7856d040, nevents=1, cur_timeout=<optimized out>) at ../src/backend/storage/ipc/latch.c:1570
#2 WaitEventSetWait (set=0x56220c2e4b50, timeout=timeout@entry=10, occurred_events=<optimized out>, occurred_events@entry=0x7ffe7856d040, nevents=nevents@entry=1,
wait_event_info=wait_event_info@entry=150994949) at ../src/backend/storage/ipc/latch.c:1516
#3 0x000056220b243224 in WaitLatch (latch=<optimized out>, latch@entry=0x0, wakeEvents=wakeEvents@entry=40, timeout=timeout@entry=10, wait_event_info=wait_event_info@entry=150994949)
at ../src/backend/storage/ipc/latch.c:538
#4 0x000056220b26cf46 in RegisterSyncRequest (ftag=ftag@entry=0x7ffe7856d0a0, type=type@entry=SYNC_FORGET_REQUEST, retryOnError=true) at ../src/backend/storage/sync/sync.c:614
#5 0x000056220af9db0a in SlruInternalDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1495
#6 0x000056220af9dab1 in SlruDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1566
#7 0x000056220af98e1b in PerformMembersTruncation (oldestOffset=<optimized out>, newOldestOffset=<optimized out>) at ../src/backend/access/transam/multixact.c:3006
#8 TruncateMultiXact (newOldestMulti=newOldestMulti@entry=3221225472, newOldestMultiDB=newOldestMultiDB@entry=4) at ../src/backend/access/transam/multixact.c:3201
#9 0x000056220b098303 in vac_truncate_clog (frozenXID=749, minMulti=<optimized out>, lastSaneFrozenXid=749, lastSaneMinMulti=3221225472) at ../src/backend/commands/vacuum.c:1917
#10 vac_update_datfrozenxid () at ../src/backend/commands/vacuum.c:1760
#11 0x000056220b1c3f76 in do_autovacuum () at ../src/backend/postmaster/autovacuum.c:2550
#12 0x000056220b1c2c3d in AutoVacWorkerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/autovacuum.c:1569
and the checkpointer is stuck here:
#0 0x00007fc9348ebf93 in clock_nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007fc9348fe353 in nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x000056220b40ecb4 in pg_usleep (microsec=microsec@entry=10000) at ../src/port/pgsleep.c:50
#3 0x000056220afb43c3 in CreateCheckPoint (flags=flags@entry=108) at ../src/backend/access/transam/xlog.c:7098
#4 0x000056220b1c6e86 in CheckpointerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/checkpointer.c:464
To fix, add AbsorbSyncRequests() to the loops where the checkpointer
waits for DELAY_CHKPT_START or DELAY_CHKPT_COMPLETE operations to
finish.
Backpatch to v14. Before that, SLRU deletion didn't call
RegisterSyncRequest, which avoided this failure. I'm not sure if there
are other similar scenarios on older versions, but we haven't had
any such reports.
Discussion: https://www.postgresql.org/message-id/ccc66933-31c1-4f6a-bf4b-45fef0d4f22e@iki.fi
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
Repeating loads of inplace-updated fields tends to cause bugs like the
one from the previous commit. While there's no bug to fix in these code
sites, adopt the load-once style. This improves the chance of future
copy/paste finding the safe style.
Discussion: https://postgr.es/m/20240423003956.e7.nmisch@google.com
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
Let table AM define custom reloptions for its tables. This allows specifying
AM-specific parameters by the WITH clause when creating a table.
The reloptions, which could be used outside of table AM, are now extracted
into the CommonRdOptions data structure. These options could be by decision
of table AM directly specified by a user or calculated in some way.
The new test module test_tam_options evaluates the ability to set up custom
reloptions and calculate fields of CommonRdOptions on their base.
The code may use some parts from prior work by Hao Wu.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Discussion: https://postgr.es/m/AMUA1wBBBxfc3tKRLLdU64rb.1.1683276279979.Hmail.wuhao%40hashdata.cn
Reviewed-by: Reviewed-by: Pavel Borisov, Matthias van de Meent, Jess Davis
Presently, the archiver process restarts when an archive callback
ERRORs. To avoid this, archive module authors can use sigsetjmp(),
manage a memory context, etc., but that requires a lot of extra
code that will likely look roughly the same between modules. This
commit adds basic archive callback ERROR handling to pgarch.c so
that module authors won't ordinarily need to worry about this.
While this built-in handler attempts to clean up anything that an
archive module could conceivably have left behind, it is possible
that some modules are doing unexpected things that require
additional cleanup. Module authors should be sure to do any extra
required cleanup in a PG_CATCH block within the archiving callback.
The archiving callback is now called in a short-lived memory
context that the archiver process resets between invocations. If a
module requires longer-lived storage, it must maintain its own
memory context.
Thanks to these changes, the basic_archive module can be greatly
simplified.
Suggested-by: Andres Freund
Reviewed-by: Andres Freund, Yong Li
Discussion: https://postgr.es/m/20230217215624.GA3131134%40nathanxps13
Previously, binaryheap didn't support updating a key and removing a
node in an efficient way. For example, in order to remove a node from
the binaryheap, the caller had to pass the node's position within the
array that the binaryheap internally has. Removing a node from the
binaryheap is done in O(log n) but searching for the key's position is
done in O(n).
This commit adds a hash table to binaryheap in order to track the
position of each nodes in the binaryheap. That way, by using newly
added functions such as binaryheap_update_up() etc., both updating a
key and removing a node can be done in O(1) on an average and O(log n)
in worst case. This is known as the indexed binary heap. The caller
can specify to use the indexed binaryheap by passing indexed = true.
The current code does not use the new indexing logic, but it will be
used by an upcoming patch.
Reviewed-by: Vignesh C, Peter Smith, Hayato Kuroda, Ajin Cherian,
Tomas Vondra, Shubham Khanna
Discussion: https://postgr.es/m/CAD21AoDffo37RC-eUuyHJKVEr017V2YYDLyn1xF_00ofptWbkg%40mail.gmail.com
If temp tables have dependencies (such as sequences) then it's
possible for autovacuum's cleanup of orphan temp tables to deadlock
against an incoming backend that's trying to clean out the temp
namespace for its own use. That can happen because RemoveTempRelations'
performDeletion call can visit objects within the namespace in
an order different from the order in which a per-table deletion
will visit them.
To fix, observe that performDeletion will begin by taking an exclusive
lock on the temp namespace (even though it won't actually delete it).
So, if we can get a shared lock on the namespace, we can be sure we're
not running concurrently with RemoveTempRelations, while also not
conflicting with ordinary use of the namespace. This requires
introducing a conditional version of LockDatabaseObject, but that's no
big deal. (It's surprising we've got along without that this long.)
Report and patch by Mikhail Zhilin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/c43ce028-2bc2-4865-9b89-3f706246eed5@postgrespro.ru
This commit limits the maximum value of wal_summary_keep_time to
INT_MAX / SECS_PER_MINUTE to avoid overflow when it is converted to
seconds. In passing, use the HOURS_PER_DAY, MINS_PER_HOUR, and
SECS_PER_MINUTE macros in the code for this GUC instead of hard-
coding those values.
Discussion: https://postgr.es/m/20240314210010.GA3056455%40nathanxps13
To avoid the compiler warnings:
launch_backend.c:211:39: warning: comparison of constant 16 with expression of type 'BackendType' (aka 'enum BackendType') is always true [-Wtautological-constant-out-of-range-compare]
launch_backend.c:233:39: warning: comparison of constant 16 with expression of type 'BackendType' (aka 'enum BackendType') is always true [-Wtautological-constant-out-of-range-compare]
The point of the assertions was to fail more explicitly if someone
adds a new BackendType to the end of the enum, but forgets to add it
to the child_process_kinds array. It was a pretty weak assertion to
begin with, because it wouldn't catch if you added a new BackendType
in the middle of the enum. So let's just remove it.
Per buildfarm member ayu and a few others, spotted by Tom Lane.
Discussion: https://www.postgresql.org/message-id/4119680.1710913067@sss.pgh.pa.us
Introduce new postmaster_child_launch() function that deals with the
differences in EXEC_BACKEND mode.
Refactor the mechanism of passing information from the parent to child
process. Instead of using different command-line arguments when
launching the child process in EXEC_BACKEND mode, pass a
variable-length blob of startup data along with all the global
variables. The contents of that blob depend on the kind of child
process being launched. In !EXEC_BACKEND mode, we use the same blob,
but it's simply inherited from the parent to child process.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
This just moves the functions, with no other changes, to make the next
commits smaller and easier to review. The moved functions are related
to launching postmaster child processes in EXEC_BACKEND mode.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
The next commit will move the internal_forkexec() function to a
different source file, but it makes sense to keep all the code related
to the win32 waitpid() emulation in postmaster.c. Split it off to a
separate function now, to make the next commit more mechanical.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
In postmaster, use a more lightweight ClientSocket struct that
encapsulates just the socket itself and the remote endpoint's address
that you get from accept() call. ClientSocket is passed to the child
process, which initializes the bigger Port struct. This makes it more
clear what information postmaster initializes, and what is left to the
child process.
Rename the StreamServerPort and StreamConnection functions to make it
more clear what they do. Remove StreamClose, replacing it with plain
closesocket() calls.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
We used to smuggle it to the child process in the Port struct, but it
seems better to pass it down as a separate argument. This paves the
way for the next commit, which moves the initialization of the Port
struct to the backend process, after forking.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
Most callers of strerror() are removed from the backend code. The
remaining callers require special handling with a saved errno from a
previous system call. The frontend code still needs strerror() where
error states need to be handled outside of fprintf.
Note that pg_regress is not changed to use %m as the TAP output may
clobber errno, since those functions call fprintf() and friends before
evaluating the format string.
Support for %m in src/port/snprintf.c has been added in d6c55de1f9,
hence all the stable branches currently supported include it.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf13jhuw.fsf@wibble.ilmari.org
Presently, if an archive module's check_configured_cb callback
returns false, a generic WARNING message is emitted, which
unfortunately provides no actionable details about the reason why
the module is not configured. This commit introduces a macro that
archive module authors can use to add a DETAIL line to this WARNING
message.
Co-authored-by: Tung Nguyen
Reviewed-by: Daniel Gustafsson, Álvaro Herrera
Discussion: https://postgr.es/m/4109578306242a7cd5661171647e11b2%40oss.nttdata.com
After XLOG_DBASE_CREATE_FILE_COPY, a correct incremental backup needs
to copy in full everything with the database and tablespace OID
mentioned in that record; but that record doesn't specifically mention
the blocks, or even the relfilenumbers, of the affected relations.
As a result, we were failing to copy data that we should have copied.
To fix, enter the DB OID and tablespace OID into the block reference
table with relfilenumber 0 and limit block 0; and treat that as a
limit block of 0 for every relfilenumber whose DB OID and tablespace
OID match.
Also, add a test case.
Patch by me, reviewed by Noah Misch.
Discussion: http://postgr.es/m/CA+Tgmob0xa=ByvGLMdAgkUZyVQE=r4nyYZ_VEa40FCfEDFnTKA@mail.gmail.com
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
Remove IsBackgroundWorker, IsAutoVacuumLauncherProcess(),
IsAutoVacuumWorkerProcess(), and IsLogicalSlotSyncWorker() in favor of
new Am*Process() macros that use MyBackendType. For consistency with
the existing Am*Process() macros.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Commit bd5132db55 introduced new atomic read/write functions with
full barrier semantics, which are intended to simplify converting
non-performance-critical code to use atomic variables. This commit
demonstrates one such conversion.
Reviewed-by: Yong Li
Discussion: https://postgr.es/m/20231110205128.GB1315705%40nathanxps13
