and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
the parameters of \connect, and fix oversight of not enabling translation
of the messages. Also, adjust \connect's similar messages to match, and
deal with 8.2-era violation of basic translatability guidelines there.
We now use the phrase 'via local socket in' rather than 'on host' in both
\c and \conninfo output, when applicable.
Fujii Masao, with some kibitzing by me.
Per discussion with David Christensen, there can be multiple
instances of PG accessible via local sockets, and you need the port
to see which one you're actually connected to. David's original
patch worked this way, but I inadvertently ripped it out during
commit.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
output stream. This typically indicates that the user quit out of $PAGER,
or that we are writing to a file and ran out of disk space. In either case
we shouldn't bother to continue fetching data.
Stephen Frost
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
refers to itself (directly or indirectly). Instead, print a message when
recursion is detected, and don't expand the repeated reference. Per bug
#5448 from Francis Markham.
Back-patch to 8.0. Although the issue exists in 7.4 as well, it seems
impractical to fix there because of the lack of any state stack that
could be used to track active expansions.
Add missing completions for:
- ALTER SEQUENCE name OWNER TO
- ALTER TYPE name RENAME TO
- ALTER VIEW name ALTER COLUMN
- ALTER VIEW name OWNER TO
- ALTER VIEW name SET SCHEMA
Fix wrong completions for:
- ALTER FUNCTION/AGGREGATE name (arguments) ...
"(arguments)" has been ignored.
- ALTER ... SET SCHEMA
"SCHEMA" has been considered as a variable name.
Those options do nothing right now, but might be wanted later, and in
any case it's confusing for the command to be interpreted as \dd if
anything is appended. Per Jaime Casanova.
by joining to pg_constraint.conindid, instead of the former technique of
joining indirectly through pg_depend. This is much more straightforward
and probably faster as well. I had originally desisted from changing these
queries when conindid was added because I was worried about losing
performance, but if we join on conrelid as well as conindid then the index
on conrelid can be used when pg_constraint is large.
--single-transaction are both used and the failure happens in commit,
e.g. failed deferred trigger. Also properly free BEGIN/COMMIT result
structures from --single-transaction.
Per report from Dominic Bevacqua
formats; a null string must not be formatted as a numeric. The more exotic
formats latex and troff also incorrectly formatted all strings as numerics
when numericlocale was on.
Backpatch to 8.1 where numericlocale option was added.
This fixes bug #5355 reported by Andy Lester.
Newly supported syntax are:
- ALTER {TABLE|INDEX|TABLESPACE} {SET|RESET} with options
- ALTER TABLE ALTER COLUMN {SET|RESET} with options
- ALTER TABLE ALTER COLUMN SET STORAGE
- CREATE INDEX CONCURRENTLY
- CREATE INDEX ON (without name)
- CREATE INDEX ... USING with pg_am.amname instead of hard-corded names
- CREATE TRIGGER with events
- DROP AGGREGATE function with arguments
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
If expand_dbname is non-zero and dbname contains an = sign, it is taken as
a conninfo string in exactly the same way as if it had been passed to
PQconnectdb. This is equivalent to the way PQsetdbLogin() works, allowing
PQconnectdbParams() to be a complete alternative.
Also improve the way the new function is called from psql and replace a
previously missed call to PQsetdbLogin() in psql. Additionally use
PQconnectdbParams() for pg_dump and friends, and the bin/scripts
command line utilities such as vacuumdb, createdb, etc.
Finally, update the documentation for the new parameter, as well as the
nuances of precedence in cases where key words are repeated or duplicated
in the conninfo string.
(failure to free col_lineptrs[] array elements) and exacerbated in the
current devel cycle (failure to free "wrap"). This resulted in moderate
bloat of psql over long script runs. Noted while testing bug #5302,
although what the reporter was complaining of was backend-side leakage.
PQconnectStartParams. These are analogous to PQconnectdb and PQconnectStart
respectively. They differ from the legacy functions in that they accept
two NULL-terminated arrays, keywords and values, rather than conninfo
strings. This avoids the need to build the conninfo string in cases
where it might be inconvenient to do so. Includes documentation.
Also modify psql to utilize PQconnectdbParams rather than PQsetdbLogin.
This allows the new config parameter application_name to be set, which
in turn is displayed in the pg_stat_activity view and included in CSV
log entries. This will also ensure both new functions get regularly
exercised.
Patch by Guillaume Lelarge with review and minor adjustments by
Joe Conway.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
directly. This was a lot of trouble, but should be worth it in terms of
not having to keep the plpgsql lexer in step with core anymore. In addition
the handling of keywords is significantly better-structured, allowing us to
de-reserve a number of words that plpgsql formerly treated as reserved.
mainloop.c. This ensures that postgres_fe.h is read before including
any system headers, which is necessary to avoid problems on some platforms
where we make nondefault selections of feature macros for stdio.h or
other headers. We have had this policy for flex modules in the backend
for many years, but for some reason it was not applied to psql.
Per trouble report from Alexandra Roy and diagnosis by Albe Laurenz.
ASCII-art style of table output to be upgraded to use Unicode box drawing
characters if desired. By default, psql will use the Unicode characters
whenever client_encoding is UTF8.
The patch forces linestyle=ascii in pg_regress usage, ensuring we don't
break the regression tests in Unicode locales.
Roger Leigh
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
Instead of requiring translators to translate the entire SQL command
synopses, change create_help.pl to only require them to translate the
placeholders, and paste those into the synopsis using a printf mechanism.
Make some small updates to the markup to make it easier to parse.
Note: This causes msgmerge of gettext 0.17 to segfault. You will need
the patch from https://savannah.gnu.org/bugs/?27474 to make it work.
msgmerge usually only runs on babel.postgresql.org, however.
append_history(), if libreadline is new enough to have those functions
(they seem to be present at least since 4.2; but libedit may not have them).
This gives significantly saner behavior when two or more sessions overlap in
their use of the history file; although having two sessions exit at just the
same time is still perilous to your history. The behavior of \s remains
unchanged, ie, overwrite whatever was there.
Per bug #5052 from Marek Wójtowicz.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
#include the version of history.h that is in the same directory as the
readline.h we are using. This avoids problems in some scenarios where both
readline and editline are installed. Report and patch by Zdenek Kotala.
when we reach the post-COPY "pump it dry" error recovery code that was added
2006-11-24. Per a report from Neil Best, there is at least one code path
in which this occurs, leading to an infinite loop in code that's supposed
to be making it more robust not less so. A reasonable response seems to be
to call PQputCopyEnd() again, so let's try that.
Back-patch to all versions that contain the cleanup loop.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
For servers older than 8.3, sort display of child tables by relname instead
of oid::regclass::text, because the cast from regclass to text did not work
back then. The older display may be slightly worse when different schemas
are involved, but that should be rare enough.
Safely schema-qualify the pg_get_indexdef call, make the query a bit
prettier in -E mode, remove useless join to pg_index, make it more obvious
that the header[] array is not overrun.
This adds a column called "Definition" to the output of psql \d on an
index, which shows the full expression behind the index column. For indexes
on plain columns, this is redundant, but for expression indexes, this
reveals the real expression.
Author: Khee Chin <kheechin@gmail.com>
As per discussion, \d shows only the number of child tables, because that
could be hundreds, when used for partitioning. \d+ shows the actual list.
Author: Damien Clochard <damien@dalibo.info>
used to work as intended, but got broken some time ago (a quoted empty string
is not an empty string), and got broken some more by the changes to generate
ecpg's preproc.y automatically. Given all the unprotected uses of $(PERL)
elsewhere, it seems best to make use of the $(missing) script rather than
trying to ensure each such use is protected individually. Also fix various
bits of documentation that omitted to mention Perl as a requirement for
building from a CVS pull. Per a complaint from Robert Haas.
cstring from the output of \df. Now that the default behavior is to
exclude all system functions, the de-cluttering rationale for this behavior
seems pretty weak; and it was always quite confusing/unhelpful if you were
actually looking for I/O functions. (Not to mention if you were looking
for encoding converters or other cases that might take or return cstring.)
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
In the backend, I changed only a handful of exemplary or important-looking
instances to make use of the plural support; there is probably more work
there. For the rest of the source, this should cover all relevant cases.
kwlist.h, to avoid having to link the backend object file into other programs
like pg_dump. We can now simply symlink a single source file from the backend
(kwlookup.c, containing the shared routine ScanKeywordLookup) and compile it
locally, which is a lot cleaner.
missing.
Since this touches most lines of the help output, also change the mix of
puts and printf calls to printf everywhere, for easier code editing and
reviewing.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
showing system tables, make \dS pattern show system table details, and
have \dtS show system and _user_ tables, to be consistent with other \d*
commands.
various display commands, not only for \z.
In passing, fix some infelicities in the newly added \d commands for SQL-MED
catalogs.
Andreas Scherbaum and Tom Lane
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
